| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull RCU updates from Paul McKenney:
- Documentation updates, perhaps most notably Neil Brown's writeup of
the reference-counting analogy to RCU.
- Expedited grace-period cleanups.
- Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid users. I have asked
around, posted a blog entry, and sent this series to LKML without
result.
- Miscellaneous fixes.
- RCU callback offloading updates, perhaps most notably Frederic
Weisbecker's updates allowing CPUs booted in the de-offloaded state
to be offloaded at runtime.
- nolibc fixes from Willy Tarreau and Anmar Faizi, but also including
Mark Brown's addition of gettid().
- RCU Tasks Trace fixes, including changes that increase the
scalability of call_rcu_tasks_trace() for the BPF folks (Martin Lau
and KP Singh).
- Various fixes including those from Wander Lairson Costa and Li
Zhijian.
- Fixes plus addition of tests for the increased call_rcu_tasks_trace()
scalability.
* tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (87 commits)
rcu/nocb: Merge rcu_spawn_cpu_nocb_kthread() and rcu_spawn_one_nocb_kthread()
rcu/nocb: Allow empty "rcu_nocbs" kernel parameter
rcu/nocb: Create kthreads on all CPUs if "rcu_nocbs=" or "nohz_full=" are passed
rcu/nocb: Optimize kthreads and rdp initialization
rcu/nocb: Prepare nocb_cb_wait() to start with a non-offloaded rdp
rcu/nocb: Remove rcu_node structure from nocb list when de-offloaded
rcu-tasks: Use fewer callbacks queues if callback flood ends
rcu-tasks: Use separate ->percpu_dequeue_lim for callback dequeueing
rcu-tasks: Use more callback queues if contention encountered
rcu-tasks: Avoid raw-spinlocked wakeups from call_rcu_tasks_generic()
rcu-tasks: Count trylocks to estimate call_rcu_tasks() contention
rcu-tasks: Add rcupdate.rcu_task_enqueue_lim to set initial queueing
rcu-tasks: Make rcu_barrier_tasks*() handle multiple callback queues
rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations
rcu-tasks: Abstract invocations of callbacks
rcu-tasks: Abstract checking of callback lists
rcu-tasks: Add a ->percpu_enqueue_lim to the rcu_tasks structure
rcu-tasks: Inspect stalled task's trc state in locked state
rcu-tasks: Use spin_lock_rcu_node() and friends
rcutorture: Combine n_max_cbs from all kthreads in a callback flood
...
|
|
Pull printk updates from Petr Mladek:
- Remove some twists in the console registration code. It does not
change the existing behavior except for one corner case. The proper
default console (with tty binding) will be registered again even when
it has been removed in the meantime. It is actually a bug fix.
Anyway, this modified behavior requires some manual interaction.
- Optimize gdb extension for huge ring buffers.
- Do not use atomic operations for a local bitmap variable.
- Update git links in MAINTAINERS.
* tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
MAINTAIERS/printk: Add link to printk git
MAINTAINERS/vsprintf: Update link to printk git tree
scripts/gdb: lx-dmesg: read records individually
printk/console: Clean up boot console handling in register_console()
printk/console: Remove need_default_console variable
printk/console: Remove unnecessary need_default_console manipulation
printk/console: Rename has_preferred_console to need_default_console
printk/console: Split out code that enables default console
vsprintf: Use non-atomic bitmap API when applicable
|
|
Pull workqueue updates from Tejun Heo:
- The code around workqueue scheduler hooks got reorganized early 2019
which unfortuately introdued a couple subtle and rare race conditions
where preemption can mangle internal workqueue state triggering a
WARN and possibly causing a stall or at least delay in execution.
Frederic fixed both early December and the fixes were sitting in
for-5.16-fixes which I forgot to push. They are here now. I'll
forward them to stable after they land.
- The scheduler hook reorganization has more implicatoins for workqueue
code in that the hooks are now more strictly synchronized and thus
the interacting operations can become more straight-forward.
Lai is in the process of simplifying workqueue code and this pull
request contains some of the patches.
* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Remove the cacheline_aligned for nr_running
workqueue: Move the code of waking a worker up in unbind_workers()
workqueue: Remove schedule() in unbind_workers()
workqueue: Remove outdated comment about exceptional workers in unbind_workers()
workqueue: Remove the advanced kicking of the idle workers in rebind_workers()
workqueue: Remove the outdated comment before wq_worker_sleeping()
workqueue: Fix unbind_workers() VS wq_worker_sleeping() race
workqueue: Fix unbind_workers() VS wq_worker_running() race
workqueue: Upgrade queue_work_on() comment
|
|
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. The only two noticeable changes are a subtle
cpuset behavior fix and trace event id field being expanded to u64
from int. Most others are code cleanups"
* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: convert 'allowed' in __cpuset_node_allowed() to be boolean
cgroup/rstat: check updated_next only for root
cgroup: rstat: explicitly put loop variant in while
cgroup: return early if it is already on preloaded list
cgroup/cpuset: Don't let child cpusets restrict parent in default hierarchy
cgroup: Trace event cgroup id fields should be u64
cgroup: fix a typo in comment
cgroup: get the wrong css for css_alloc() during cgroup_init_subsys()
cgroup: rstat: Mark benign data race to silence KCSAN
|
|
Remove the initialization of pci_ignore_seg to false which is pointless.
Link: https://lore.kernel.org/r/20211203080758.962-1-guolongji@uniontech.com
Signed-off-by: Longji Guo <guolongji@uniontech.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
A task can end up indefinitely sleeping in do_select() ->
poll_schedule_timeout() when the following race happens:
TASK1 (thread1) TASK2 TASK1 (thread2)
do_select()
setup poll_wqueues table
with 'fd'
write data to 'fd'
pollwake()
table->triggered = 1
closes 'fd' thread1 is
waiting for
poll_schedule_timeout()
- sees table->triggered
table->triggered = 0
return -EINTR
loop back in do_select()
But at this point when TASK1 loops back, the fdget() in the setup of
poll_wqueues fails. So now so we never find 'fd' is ready for reading
and sleep in poll_schedule_timeout() indefinitely.
Treat an fd that got closed as a fd on which some event happened. This
makes sure cannot block indefinitely in do_select().
Another option would be to return -EBADF in this case but that has a
potential of subtly breaking applications that excercise this behavior
and it happens to work for them. So returning fd as active seems like a
safer choice.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some devices have an erratum such that they only support DWORD accesses to
some registers. E.g., this Bayhub O2 device ([VID:DID] = [0x1217:0x8621])
only supports DWORD accesses to LTR latency registers and L1 PM substates
control registers:
https://github.com/rajatxjain/public_shared/blob/main/OZ711LV2_appnote.pdf
The L1 PM substate control registers are DWORD sized, and hence their
access in the kernel is already DWORD sized, so we don't need to do
anything for them.
However, the LTR registers being WORD sized, are in need of a solution.
Convert the WORD sized accesses to these registers into DWORD sized
accesses while saving and restoring them.
Link: https://lore.kernel.org/r/20211222012105.3438916-1-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Terminate the misc_device->fops assignment statement with a semicolon.
Link: https://lore.kernel.org/r/1641632977-6588-1-git-send-email-wangming01@loongson.cn
Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
If we encounter an error after the kfree(acpi_hw_cfg); then the goto
err; will result in a double free.
Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220111072232.GG11243@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Before this patch, glock dumps would not dump the gl_object for iopen
glocks. This information can help us debug problems related to eviction:
when AN iopen glock is blocked we can see the status of its underlying
inode and its flags, etc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
If table->serial_port.access_width is more than 29, it causes
undefined behavior when ACPI_ACCESS_BIT_WIDTH shifts it to
(1 << ((size) + 2)):
[ 0.000000] UBSAN: Undefined behaviour in drivers/acpi/spcr.c:114:11
[ 0.000000] shift exponent 102 is too large for 32-bit type 'int'
Use the new ACPI_ACCESS_ defines to test that serial_port.access_width
is less than 30 and set it to 6 if it is not.
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Actual hardware state of CRTC is controlled by the member 'active' in
struct drm_crtc_state instead of the member 'enable', according to the
kernel doc of the member 'enable'. In fact, the drm client modeset
and atomic helpers are using the member 'active' to do the control.
Referencing the member 'enable' of new_crtc_state, the function
crtc_needs_disable() may fail to reflect if CRTC needs disable in
self refresh mode, e.g., when the framebuffer emulation will be blanked
through the client modeset helper with the next commit, the member
'enable' of new_crtc_state is still true while the member 'active' is
false, hence the relevant potential encoder and bridges won't be disabled.
So, let's check new_crtc_state->active to determine if CRTC needs disable
in self refresh mode instead of new_crtc_state->enable.
Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230040626.646807-1-victor.liu@nxp.com
|
|
Because devres_alloc() may fail, devm_ioremap() may return NULL.
Then, 'clk_data->base' will be assigned to clkdev->data->base in
platform_device_register_data().
The PTR_ERR_OR_ZERO() check on clk_data does not cover 'base', so
it is better to add an explicit check against NULL after updating
it.
Fixes: 3f4ba94e3615 ("ACPI: APD: Add AMD misc clock handler support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Per PCIe r5, sec 7.5.1.2.4, a device must not claim accesses to its
Expansion ROM unless both the Memory Space Enable and the Expansion ROM
Enable bit are set. But apparently some Intel I210 NICs don't work
correctly if the ROM BAR overlaps another BAR, even if the Expansion ROM is
disabled.
Michael reported that on a Kontron SMARC-sAL28 ARM64 system with U-Boot
v2021.01-rc3, the ROM BAR overlaps BAR 3, and networking doesn't work at
all:
BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M]
BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K]
ROM: 0x40200000 (disabled) [size=1M]
NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out
Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
igb 0002:01:00.0 enP2p1s0: Reset adapter
Previously, pci_std_update_resource() wrote the assigned ROM address to the
BAR only when the ROM was enabled. This meant that the I210 ROM BAR could
be left with an address assigned by firmware, which might overlap with
other BARs.
Quirk these I210 devices so pci_std_update_resource() always writes the
assigned address to the ROM BAR, whether or not the ROM is enabled.
Link: https://lore.kernel.org/r/20211223163754.GA1267351@bhelgaas
Link: https://lore.kernel.org/r/20201230185317.30915-1-michael@walle.cc
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211105
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Take bit 7 into account when reading sink count from
DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220104184857.784563-2-jani.nikula@intel.com
|
|
DP_SINK_COUNT_ESI and DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 have the same
contents as DP_SINK_COUNT and DP_DEVICE_SERVICE_IRQ_VECTOR,
respectively.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220104184857.784563-1-jani.nikula@intel.com
|
|
Some BIOS-es contain a bug where they add addresses which map to system
RAM in the PCI host bridge window returned by the ACPI _CRS method, see
commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address
space").
To work around this bug Linux excludes E820 reserved addresses when
allocating addresses from the PCI host bridge window since 2010.
Recently (2019) some systems have shown-up with E820 reservations which
cover the entire _CRS returned PCI bridge memory window, causing all
attempts to assign memory to PCI BARs which have not been setup by the
BIOS to fail. For example here are the relevant dmesg bits from a
Lenovo IdeaPad 3 15IIL 81WE:
[mem 0x000000004bc50000-0x00000000cfffffff] reserved
pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window]
The ACPI specifications appear to allow this new behavior:
The relationship between E820 and ACPI _CRS is not really very clear.
ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means:
This range of addresses is in use or reserved by the system and is
not to be included in the allocatable memory pool of the operating
system's memory manager.
and it may be used when:
The address range is in use by a memory-mapped system device.
Furthermore, sec 15.2 says:
Address ranges defined for baseboard memory-mapped I/O devices, such
as APICs, are returned as reserved.
A PCI host bridge qualifies as a baseboard memory-mapped I/O device,
and its apertures are in use and certainly should not be included in
the general allocatable pool, so the fact that some BIOS-es reports
the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug.
So it seems that the excluding of E820 reserved addresses is a mistake.
Ideally Linux would fully stop excluding E820 reserved addresses,
but then the old systems this was added for will regress.
Instead keep the old behavior for old systems, while ignoring
the E820 reservations for any systems from now on.
Old systems are defined here as BIOS year < 2018, this was chosen to make
sure that E820 reservations will not be used on the currently affected
systems, while at the same time also taking into account that the systems
for which the E820 checking was originally added may have received BIOS
updates for quite a while (esp. CVE related ones), giving them a more
recent BIOS year then 2010.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793
BugLink: https://bugs.launchpad.net/bugs/1878279
BugLink: https://bugs.launchpad.net/bugs/1931715
BugLink: https://bugs.launchpad.net/bugs/1932069
BugLink: https://bugs.launchpad.net/bugs/1921649
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 81424d0ad0d4 ("MIPS: ath79: Use the reset controller to restart
OF machines") removed setup of _machine_restart on OF machines to use
reset handler in reset controller driver.
While removing remnants of non-OF machines in commit 3a77e0d75eed
("MIPS: ath79: drop machfiles"), this was introduced again, making it
impossible to use additional restart handlers registered through device
tree. Drop setting _machine_restart altogether, and ath79_restart
function, which is no longer used after this.
Fixes: 3a77e0d75eed ("MIPS: ath79: drop machfiles")
Cc: John Crispin <john@phrozen.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When there is an error in peer create process from
ath11k_peer_find(), the code attempts to handle a fallback
for peer create. When this fallback fails, the driver returns
the fallback return code rather than actual error code
(-ENOENT). So refactor the fallback routine to return
the actual error code.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1640244819-21183-1-git-send-email-quic_periyasa@quicinc.com
|
|
Currently, ath11k_core_alloc() creates a single thread workqueue.
This workqueue is not detroyed during clean up when ath11k modules
are unloaded from the kernel and is left as it is.
If workqueue is not destroyed, it could lead to kernel
memory scarcity in a longer run. This could affect self and
other drivers workability as well.
Add destroy workqueue in ath11k_core_free().
Tested on: IPQ8074 WLAN.HK.2.4.0.1-01746-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1640231787-17408-1-git-send-email-quic_adisi@quicinc.com
|
|
In function ath10k_wow_convert_8023_to_80211(), it will do memcpy for
the new->pattern, and currently the new->pattern and new->mask is same
with the old, then the memcpy of new->pattern will also overwrite the
old->pattern, because the header format of new->pattern is 802.11,
its length is larger than the old->pattern which is 802.3. Then the
operation of "Copy frame body" will copy a mistake value because the
body memory has been overwrite when memcpy the new->pattern.
Assign another empty value to new_pattern to avoid the overwrite issue.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Fixes: fa3440fa2fa1 ("ath10k: convert wow pattern from 802.3 to 802.11")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211222031347.25463-1-quic_wgong@quicinc.com
|
|
The node pointer is returned by of_find_node_by_type()
or of_parse_phandle() with refcount incremented. Calling
of_node_put() to aovid the refcount leak.
Fixes: 6ac04bdc5edb ("ath11k: Use reserved host DDR addresses from DT for PCI devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211221114003.335557-1-yangyingliang@huawei.com
|
|
This code accidentally returns PTR_ERR(NULL) which is success. It
should return a negative error code.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220111072657.GK11243@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A previous change to simple-card resulted in asoc_simple_parse_dai
attempting to retrieve the dai_name for platform components, which are
unlikely to have a valid DAI name. This caused simple-card to fail to
probe when using the xlnx_formatter_pcm as the platform component, since
it does not register any DAI components.
Since the dai_name is not used for platform components, just skip trying
to retrieve it for those.
Fixes: f107294c6422 ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Once the call to drm_fb_helper_remove_conflicting_framebuffers() has
been made, simplefb has been unregistered and the KMS driver is entirely
in charge of the display.
Thus, we can notify the firmware it can free whatever resource it was
using to maintain simplefb functional.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-5-maxime@cerno.tech
|
|
The bind hooks will modify their controller registers, so simplefb is
going to be unusable anyway. Let's avoid any transient state where it
could still be in the system but no longer functionnal.
Acked-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-4-maxime@cerno.tech
|
|
If we have nomodeset on the kernel command line we should have the
firmware framebuffer driver kept as is and not try to load the
full-blown KMS driver.
In this case, let's just register the v3d driver.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-3-maxime@cerno.tech
|
|
The RPI_FIRMWARE_NOTIFY_DISPLAY_DONE firmware call allows to tell the
firmware the kernel is in charge of the display now and the firmware can
free whatever resources it was using.
Acked-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-2-maxime@cerno.tech
|
|
Qemu currently supports up to 16 CPUs, so increase the default from 4 to 16.
Bload-o-meter shows only an increase of 800 bytes with this change.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With CONFIG_KALLSYMS_ALL=y, the function is_ksym_addr() is used to
determine if a symbol is from inside the kernel range. For that the
given symbol address is checked if it's inside the _stext to _end range.
Although this is correct, some architectures (e.g. parisc) may have the
init area before the _stext address and as such the check in
is_ksym_addr() fails. By extending the range check to include the init
section, __is_kernel() will now detect symbols in this range as well.
This fixes an issue on parisc where addresses of kernel functions in
init sections aren't resolved to their symbol names.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
No need to have an own hpmc_stack. Just re-use the toc_stack of the
monarch CPU as either a TOC or a HPMC will happen at the same time.
This reduces the kernel memory footprint by 16k.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Before this patch, the TOC code used a pre-allocated stack of 16kb for
each possible CPU. That space overhead was the reason why the TOC
feature wasn't enabled by default for 32-bit kernels.
This patch rewrites the TOC code to use a per-cpu stack. That way we use
much less memory now and as such we enable the TOC feature by default on
all kernels.
Additionally the dump of the registers and the stacktrace wasn't
serialized, which led to multiple CPUs printing the stack backtrace at
once which rendered the output unreadable.
Now the backtraces are nicely serialized by a lock.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The current brcmstb driver works for Arm and Arm64. A few things are
modified here for us to support MIPs as well.
o There are four outbound range register groups and each directs a window
of up to 128MB. Even though there are four 128MB DT "ranges" in the
bmips PCIe DT node, these ranges are contiguous and are collapsed into
a single range by the OF range parser. Now the driver assumes a single
range -- for MIPs only -- and splits it back into 128MB sizes.
o For bcm7425, the config space accesses must be 32-bit reads or
writes. In addition, the 4k config space register array is missing
and not used.
o The registers for the upper 32-bits of the outbound window address do
not exist.
o Burst size must be set to 256 (this refers to an internal bus).
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The code in 'arch/mips/bmips/dma.c' performed DMA mapping for inbound
regions. This mapping was and is required for the Broadcom STB PCIe
controller HW. This code is removed as the current 'struct device' has a
@dma_range_map field which performs the same functionality by processing
the "dma-ranges" DT property.
Subsequently, ARCH_HAS_PHYS_TO_DMA is now unset since the dma_to_phys()
and phys_to_dma() functions are removed.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
For Broadcom STB PCIe HW. The 7425 and 7435 are MIPs-based SOCs. Not much
difference between the two for the DT properties except that they have
slightly different PCIe interrupt assignments.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The Broadcom STB Arm and MIPs SOCs use the same PCIe controller
HW, although the MIPs version is older.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
memblock.h is not a uAPI header, so __KERNEL__ guard can be deleted
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220111102847.673746-1-karolinadrobnik@gmail.com
|
|
There is always a struct vma_resource guaranteed to be alive when we
access a corresponding struct vma_snapshot.
So ditch the latter and instead of allocating vma_snapshots, reference
the already existning vma_resource.
This requires a couple of extra members in struct vma_resource but that's
a small price to pay for the simplification.
v2:
- Fix a missing include and declaration (kernel test robot <lkp@intel.com>)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-7-thomas.hellstrom@linux.intel.com
|
|
Add a selftest to exercise asynchronous migration and -unbining.
Extend the gem_migrate selftest to perform the migrations while
depending on a spinner and a bound vma set up on the migrated
buffer object.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-6-thomas.hellstrom@linux.intel.com
|
|
Implement async (non-blocking) unbinding by not syncing the vma before
calling unbind on the vma_resource.
Add the resulting unbind fence to the object's dma_resv from where it is
picked up by the ttm migration code.
Ideally these unbind fences should be coalesced with the migration blit
fence to avoid stalling the migration blit waiting for unbind, as they
can certainly go on in parallel, but since we don't yet have a
reasonable data structure to use to coalesce fences and attach the
resulting fence to a timeline, we defer that for now.
Note that with async unbinding, even while the unbind waits for the
preceding bind to complete before unbinding, the vma itself might have been
destroyed in the process, clearing the vma pages. Therefore we can
only allow async unbinding if we have a refcounted sg-list and keep a
refcount on that for the vma resource pages to stay intact until
binding occurs. If this condition is not met, a request for an async
unbind is diverted to a sync unbind.
v2:
- Use a separate kmem_cache for vma resources for now to isolate their
memory allocation and aid debugging.
- Move the check for vm closed to the actual unbinding thread. Regardless
of whether the vm is closed, we need the unbind fence to properly wait
for capture.
- Clear vma_res::vm on unbind and update its documentation.
v4:
- Take cache coloring into account when searching for vma resources
pending unbind. (Matthew Auld)
v5:
- Fix timeout and error check in i915_vma_resource_bind_dep_await().
- Avoid taking a reference on the object for async binding if
async unbind capable.
- Fix braces around a single-line if statement.
v6:
- Fix up the cache coloring adjustment. (Kernel test robot <lkp@intel.com>)
- Don't allow async unbinding if the vma_res pages are not the same as
the object pages. (Matthew Auld)
v7:
- s/unsigned long/u64/ in a number of places (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-5-thomas.hellstrom@linux.intel.com
|
|
A pin-count is already held by vma->pages so taking an additional pin
during async binds is not necessary.
When we introduce async unbinding we have other means of keeping the
object pages alive.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-4-thomas.hellstrom@linux.intel.com
|
|
When introducing asynchronous unbinding, the vma itself may no longer
be alive when the actual binding or unbinding takes place.
Update the gtt i915_vma_ops accordingly to take a struct i915_vma_resource
instead of a struct i915_vma for the bind_vma() and unbind_vma() ops.
Similarly change the insert_entries() op for struct i915_address_space.
Replace a couple of i915_vma_snapshot members with their newly introduced
i915_vma_resource counterparts, since they have the same lifetime.
Also make sure to avoid changing the struct i915_vma_flags (in particular
the bind flags) async. That should now only be done sync under the
vm mutex.
v2:
- Update the vma_res::bound_flags when binding to the aliased ggtt
v6:
- Remove I915_VMA_ALLOC_BIT (Matthew Auld)
- Change some members of struct i915_vma_resource from unsigned long to u64
(Matthew Auld)
v7:
- Fix vma resource size parameters to be u64 rather than unsigned long
(Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-3-thomas.hellstrom@linux.intel.com
|
|
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107083633.20843-1-linmq006@gmail.com
|
|
We noticed our tc ebpf tools can't start after we upgrade our in-house kernel
version from 4.19 to 5.10. That is because of the behaviour change in bpffs
caused by commit d2935de7e4fd ("vfs: Convert bpf to use the new mount API").
In our tc ebpf tools, we do strict environment check. If the environment is
not matched, we won't allow to start the ebpf progs. One of the check is whether
bpffs is properly mounted. The mount information of bpffs in kernel-4.19 and
kernel-5.10 are as follows:
- kernel 4.19
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
- kernel 5.10
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
none on /sys/fs/bpf type bpf (rw,relatime)
The device name in kernel-5.10 is displayed as none instead of bpffs, then our
environment check fails. Currently we modify the tools to adopt to the kernel
behaviour change, but I think we'd better change the kernel code to keep the
behavior consistent.
After this change, the mount information will be displayed the same with the
behavior in kernel-4.19, for example:
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
Fixes: d2935de7e4fd ("vfs: Convert bpf to use the new mount API")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/bpf/20220108134623.32467-1-laoar.shao@gmail.com
|
|
> Remove unused variable and fix missing initialization.
>
> >> net/netfilter/nf_tables_api.c:8266:6: warning: variable 'i' set but not used [-Wunused-but-set-variable]
> int i;
> ^
Fixes: 2c865a8a28a1 ("netfilter: nf_tables: add rule blob layout")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The helper gets registered as 'netbios-ns', not netbios_ns.
Intentionally not adding a fixes-tag because i don't want this to go to
stable. This wasn't noticed for a very long time so no so no need to risk
regressions.
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Johan writes:
GNSS updates for 5.17-rc1
Here are the GNSS updates for 5.17-rc1, including:
- support for GNSS receivers with USB interface
- support for Sierra Wireless XM1210
All have been in linux-next with no reported issues.
* tag 'gnss-5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: usb: add support for Sierra Wireless XM1210
gnss: add USB support
gnss: drop stray semicolons
|
|
Updated new values from BSPEC.
Bspec: 53920
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110234520.6836-1-clinton.a.taylor@intel.com
|
|
Fix typo: separate arguments with comma rather than dot.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111003305.1214667-1-lucas.demarchi@intel.com
|
|
Introduce vma resources, sort of similar to TTM resources, needed for
asynchronous bind management. Initially we will use them to hold
completion of unbinding when we capture data from a vma, but they will
be used extensively in upcoming patches for asynchronous vma unbinding.
v6:
- Some documentation updates
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-2-thomas.hellstrom@linux.intel.com
|
Linus Torvalds
Longji Guo
Jan Kara
Rajat Jain
Ming Wang
Dan Carpenter
Bob Peterson
Mark Langsdorf
Liu Ying
Jiasheng Jiang
Bjorn Helgaas
Jani Nikula
Hans de Goede
Lech Perczak
Karthikeyan Periyasamy
Aditya Kumar Singh
Wen Gong
Yang Yingliang
Robert Hancock
Maxime Ripard
Helge Deller
Jim Quinlan
Karolina Drobnik
Thomas Hellström
Miaoqian Lin
Yafang Shao
Pablo Neira Ayuso
Florian Westphal
Greg Kroah-Hartman
Clint Taylor
Lucas De Marchi