aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-01-04drm/bridge/synopsys: dsi: extend the prototype of mode_valid()Antonio Borneo2-2/+7
To evaluate the validity of a video mode, some additional internal value has to be passed to the platform implementation. Extend the prototype of mode_valid(). Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211218215055.212421-2-antonio.borneo@foss.st.com
2022-01-04drm/stm: dsi: move lane capability detection in probe()Antonio Borneo1-8/+8
There is no need to re-compute the dsi lane capability because it only depends on dsi hw version. Since dsi hw version is detected at probe(), move there also the assignment of dsi lane capability. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211218215055.212421-1-antonio.borneo@foss.st.com
2022-01-04ata: libata: add qc_prep tracepointHannes Reinecke2-1/+10
Convert the existing ata_qc_issue() tracepoint into a template, and add tracepoints for ata_qc_prep() and ata_qc_issue() based on that template. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: add reset tracepointsHannes Reinecke11-57/+115
To follow the flow of control we should be using tracepoints, as they will tie in with the actual I/O flow and deliver a better overview about what it happening. This patch adds tracepoints for hard reset, soft reset, and postreset and adds them in the libata-eh control flow. With that we can drop the reset DPRINTK calls in the various drivers. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: sanitize ATA_HORKAGE_DUMP_IDHannes Reinecke1-2/+2
With moving ata_dev_dbg() over to dynamic debugging ATA_HORKAGE_DUMP_ID will now print out the raw IDENTIFY data without a header unless explicitly enable via dyndebug. So move the logging level up to INFO and have the header printed always. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: move ata_dump_id() to dynamic debuggingHannes Reinecke1-27/+9
Use ata_dev_dbg() to print out the information in ata_dump_id() and remove the ata_msg_probe() conditional. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: Add ata_port_classify() helperHannes Reinecke8-21/+42
Add an ata_port_classify() helper to print out the results from the device classification and remove the debugging statements from ata_dev_classify(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: whitespace cleanupHannes Reinecke2-10/+10
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: remove pointless debugging messagesHannes Reinecke7-29/+0
Debugging messages in pci init functions or sg setup are pretty much pointless, as the workflow pretty much decides what happened. So drop them. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: use min() to make code cleanerChangcheng Deng1-8/+2
Use min() in order to make code cleaner. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libahci_platform: Get rid of dup message when IRQ can't be retrievedAndy Shevchenko1-4/+1
platform_get_irq() will print a message when it fails. No need to repeat this. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libahci_platform: Remove bogus 32-bit DMA mask attemptAndy Shevchenko1-7/+2
If 64-bit mask attempt fails, the 32-bit will fail by the very same reason. Don't even try the latter. It's a continuation of the changes that contains, e.g. dcc02c19cc06 ("sata_sil24: use dma_set_mask_and_coherent"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: sata_dwc_460ex: Remove unused forward declarationAndy Shevchenko1-1/+0
sata_dwc_port_stop() is not used before being defined, remove redundant forward declaration. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: sata_dwc_460ex: Use temporary variable for struct deviceAndy Shevchenko1-18/+19
Use temporary variable for struct device to make code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: sata_dwc_460ex: Use devm_platform_*ioremap_resource() APIsAndy Shevchenko1-5/+2
Use devm_platform_get_and_ioremap_resource() and devm_platform_ioremap_resource() APIs instead of their open coded analogues. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: sata_fsl: use sysfs_emit()Damien Le Moal1-3/+3
Use sysfs_emit() instead of sprintf() in fsl_sata_intr_coalescing_show() and fsl_sata_rx_watermark_show(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: ahci: use sysfs_emit()Damien Le Moal1-1/+1
Use sysfs_emit() instead of sprintf in remapped_nvme_show(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata-scsi: use sysfs_emit()Damien Le Moal1-1/+1
Use sysfs_emit() instead of snprintf() in ata_scsi_park_show(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata-sata: use sysfs_emit()Damien Le Moal1-2/+2
Use sysfs_emit() instead of snprintf() in sysfs attibute show() functions. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: sata_fsl: Use struct_group() for memcpy() regionKees Cook1-4/+6
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct command_desc around members acmd and fill, so they can be referenced together. This will allow memset(), memcpy(), and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of acmd: In function 'fortify_memset_chk', inlined from 'sata_fsl_qc_prep' at drivers/ata/sata_fsl.c:534:3: ./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 199 | __write_overflow_field(); | ^~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04Merge branches 'arm/smmu', 'virtio', 'x86/amd', 'x86/vt-d' and 'core' into nextJoerg Roedel20-570/+493
2022-01-03Input: gpio-keys - avoid clearing twice some memoryChristophe JAILLET1-1/+1
bitmap_parselist() already clears the 'bits' bitmap, so there is no need to clear it when it is allocated. This just wastes some cycles. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/d6ee621b9dd75b92f8831db365cee58dc2025322.1640813136.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-04powerpc/xive: Add missing null check after calling kmallocAmmar Faizi1-0/+3
Commit 930914b7d528fc ("powerpc/xive: Add a debugfs file to dump internal XIVE state") forgot to add a null check. Add it. Fixes: 930914b7d528fc6b0249bffc00564100bcf6ef75 ("powerpc/xive: Add a debugfs file to dump internal XIVE state") Signed-off-by: Ammar Faizi <ammarfaizi2@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211226135314.251221-1-ammar.faizi@intel.com
2022-01-04powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" APIChristophe JAILLET1-3/+5
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9e24eedeab44cbb840598bb188561a48811de845.1641119338.git.christophe.jaillet@wanadoo.fr
2022-01-03pktcdvd: convert to use attribute groupsGreg Kroah-Hartman2-150/+133
There is no need to create kobject children of the pktcdvd device just to display a subdirectory name. Instead, use a named attribute group which removes the extra kobjects and also fixes the userspace race where the device is created yet tools like libudev can not see the attributes as they think the subdirectories are some other sort of device. Cc: linux-block@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220103162408.742003-1-gregkh@linuxfoundation.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-04ata: pata_ali: no need to initialise statics to 0Jason Wang1-1/+1
Static variables do not need to be initialized to 0. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-03Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.16Jens Axboe1-1/+2
Pull MD fix from Song, fixing a raid1 regression with missing bitmap updates. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid1: fix missing bitmap update w/o WriteMostly devices
2022-01-03Merge tag 'batadv-next-pullrequest-20220103' of git://git.open-mesh.org/linux-mergeJakub Kicinski3-22/+18
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - allow netlink usage in unprivileged containers, by Linus Lüssing - remove unneeded variable, by Minghao Chi * tag 'batadv-next-pullrequest-20220103' of git://git.open-mesh.org/linux-merge: batman-adv: remove unneeded variable in batadv_nc_init batman-adv: allow netlink usage in unprivileged containers batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20220103171722.1126109-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03Merge tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-mergeJakub Kicinski3-11/+21
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - avoid sending link-local multicast to multicast routers, by Linus Lüssing * tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge: batman-adv: mcast: don't send link-local multicast to mcast routers ==================== Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03net: mdio: Demote probed message to debug printFlorian Fainelli1-1/+1
On systems with large numbers of MDIO bus/muxes the message indicating that a given MDIO bus has been successfully probed is repeated for as many buses we have, which can eat up substantial boot time for no reason, demote to a debug print. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"Florian Fainelli1-2/+2
This reverts commit b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") since it prevents any system that uses a fixed PHY without a GPIO descriptor from properly working: [ 5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY [ 5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22 [ 5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY [ 5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22 Fixes: b45396afa417 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomizationLukas Bulwahn1-1/+1
The config RANDOMIZE_SLAB does not exist, the authors probably intended to refer to the config RANDOMIZE_BASE, which provides kernel address-space randomization. They probably just confused SLAB with BASE (these two four-letter words coincidentally share three common letters), as they also point out the config SLAB_FREELIST_RANDOM as further randomization within the same sentence. Fix the reference of the config for kernel address-space randomization to the config that provides that. Fixes: 6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-01-03Documentation: kgdb: properly capitalize the MAGIC_SYSRQ configLukas Bulwahn1-2/+2
Most readers are probably going to figure out that the config is actually all upper-case letters, as all Kconfig symbols are this way. Properly capitalizing makes the script ./scripts/checkkconfigsymbols.py happy, which otherwise would report this as a reference to a non-existing Kconfig symbol. So, use the right capitalization for the MAGIC_SYSRQ config in the kgdb documentation. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211230172423.30430-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-01-03docs/zh_CN: Update and fix a couple of typosShile Zhang1-5/+6
Update to the original README.rst and fix some typos. Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Reviewed-by: Alex Shi <alexs@kernel.org> Link: https://lore.kernel.org/r/20211230025702.186158-1-shile.zhang@linux.alibaba.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-01-03scripts: sphinx-pre-install: add required ctex dependencyMauro Carvalho Chehab1-0/+1
After a change meant to fix support for oriental characters (Chinese, Japanese, Korean), ctex stylesheet is now a requirement for PDF output. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/165aa6167f21e3892a6e308688c93c756e94f4e0.1641243581.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-01-03md/raid1: fix missing bitmap update w/o WriteMostly devicesSong Liu1-1/+2
commit [1] causes missing bitmap updates when there isn't any WriteMostly devices. Detailed steps to reproduce by Norbert (which somehow didn't make to lore): # setup md10 (raid1) with two drives (1 GByte sparse files) dd if=/dev/zero of=disk1 bs=1024k seek=1024 count=0 dd if=/dev/zero of=disk2 bs=1024k seek=1024 count=0 losetup /dev/loop11 disk1 losetup /dev/loop12 disk2 mdadm --create /dev/md10 --level=1 --raid-devices=2 /dev/loop11 /dev/loop12 # add bitmap (aka write-intent log) mdadm /dev/md10 --grow --bitmap=internal echo check > /sys/block/md10/md/sync_action root:# cat /sys/block/md10/md/mismatch_cnt 0 root:# # remove member drive disk2 (loop12) mdadm /dev/md10 -f loop12 ; mdadm /dev/md10 -r loop12 # modify degraded md device dd if=/dev/urandom of=/dev/md10 bs=512 count=1 # no blocks recorded as out of sync on the remaining member disk1/loop11 root:# mdadm -X /dev/loop11 | grep Bitmap Bitmap : 16 bits (chunks), 0 dirty (0.0%) root:# # re-add disk2, nothing synced because of empty bitmap mdadm /dev/md10 --re-add /dev/loop12 # check integrity again echo check > /sys/block/md10/md/sync_action # disk1 and disk2 are no longer in sync, reads return differend data root:# cat /sys/block/md10/md/mismatch_cnt 128 root:# # clean up mdadm -S /dev/md10 losetup -d /dev/loop11 losetup -d /dev/loop12 rm disk1 disk2 Fix this by moving the WriteMostly check to the if condition for alloc_behind_master_bio(). [1] commit fd3b6975e9c1 ("md/raid1: only allocate write behind bio for WriteMostly device") Fixes: fd3b6975e9c1 ("md/raid1: only allocate write behind bio for WriteMostly device") Cc: stable@vger.kernel.org # v5.12+ Cc: Guoqing Jiang <guoqing.jiang@linux.dev> Cc: Jens Axboe <axboe@kernel.dk> Reported-by: Norbert Warmuth <nwarmuth@t-online.de> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Song Liu <song@kernel.org>
2022-01-03PCI: spear13xx: Avoid invalid address space conversionsBjorn Helgaas1-4/+4
The sparse checker complains about converting pointers between address spaces. We correctly stored an __iomem pointer in struct spear13xx_pcie, but discarded the __iomem when extracting app_base, causing one warning. Then we passed the non-__iomem pointer to writel(), which expects an __iomem pointer, causing another warning. Add the appropriate annotations. The sparse warnings look like this: $ make C=2 drivers/pci/controller/ drivers/pci/controller/dwc/pcie-spear13xx.c:72:54: warning: incorrect type in initializer (different address spaces) drivers/pci/controller/dwc/pcie-spear13xx.c:72:54: expected struct pcie_app_reg *app_reg drivers/pci/controller/dwc/pcie-spear13xx.c:72:54: got void [noderef] __iomem *app_base drivers/pci/controller/dwc/pcie-spear13xx.c:78:26: warning: incorrect type in argument 2 (different address spaces) drivers/pci/controller/dwc/pcie-spear13xx.c:78:26: expected void volatile [noderef] __iomem *addr drivers/pci/controller/dwc/pcie-spear13xx.c:78:26: got unsigned int * Link: https://lore.kernel.org/r/20211223213749.1314142-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Pratyush Anand <pratyush.anand@gmail.com>
2022-01-03PCI: hisi: Avoid invalid address space conversionsBjorn Helgaas1-10/+22
The sparse checker complains about converting pointers between address spaces. The pci_config_window.priv pointer is a generic void *, but hisi_pcie_map_bus() needs a void __iomem *. This isn't a problem in other drivers because they store the __iomem pointer in a driver struct. Add a trivial struct hisi_pcie to avoid the warning. The sparse warning looks like this: $ make C=2 drivers/pci/controller/ drivers/pci/controller/dwc/pcie-hisi.c:61:37: warning: incorrect type in initializer (different address spaces) drivers/pci/controller/dwc/pcie-hisi.c:61:37: expected void [noderef] __iomem *reg_base drivers/pci/controller/dwc/pcie-hisi.c:61:37: got void *priv Link: https://lore.kernel.org/r/20211223213749.1314142-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Zhou Wang <wangzhou1@hisilicon.com>
2022-01-03PCI: xilinx-cpm: Rename xilinx_cpm_pcie_port to xilinx_cpm_pcieBjorn Helgaas1-22/+22
Rename struct xilinx_cpm_pcie_port to xilinx_cpm_pcie to match the convention of <driver>_pcie. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-24-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2022-01-03PCI: xilinx: Rename xilinx_pcie_port to xilinx_pcieFan Fei1-79/+79
Rename struct xilinx_pcie_port to xilinx_pcie to match the convention of <driver>_pcie. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-23-helgaas@kernel.org Signed-off-by: Fan Fei <ffclaire1224@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2022-01-03PCI: xgene: Rename xgene_pcie_port to xgene_pcieFan Fei1-23/+23
Rename struct xgene_pcie_port to xgene_pcie to match the convention of <driver>_pcie. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-22-helgaas@kernel.org Signed-off-by: Fan Fei <ffclaire1224@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Toan Le <toan@os.amperecomputing.com>
2022-01-03PCI: uniphier: Rename uniphier_pcie_priv to uniphier_pcieFan Fei1-73/+74
Rename struct uniphier_pcie_priv to uniphier_pcie to match the convention of <driver>_pcie. No functional change intended. [bhelgaas: drop extraneous uniphier_pcie_irq_ack() from patch] Link: https://lore.kernel.org/r/20211223011054.1227810-21-helgaas@kernel.org Signed-off-by: Fan Fei <ffclaire1224@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masami Hiramatsu <mhiramat@kernel.org>
2022-01-03PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcieFan Fei1-111/+111
Rename tegra_pcie_dw to tegra194_pcie to match the convention of <driver>_pcie. No functional change intended. [bhelgaas: rename functions similarly] Link: https://lore.kernel.org/r/20211223011054.1227810-20-helgaas@kernel.org Signed-off-by: Fan Fei <ffclaire1224@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com>
2022-01-03PCI: rcar-gen2: Rename rcar_pci_priv to rcar_pciBjorn Helgaas1-7/+7
Rename struct rcar_pci_priv to rcar_pci to match the convention of <driver>_pci. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-19-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2022-01-03PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_Bjorn Helgaas1-18/+18
Rename mt7621_pci_* structs and functions to mt7621_pcie_* for consistency with the rest of the file. Link: https://lore.kernel.org/r/20211223011054.1227810-18-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com>
2022-01-03PCI: microchip: Rename mc_port to mc_pcieBjorn Helgaas1-21/+21
Rename struct mc_port to mc_pcie to match the convention of <driver>_pcie. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-16-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Daire McNamara <daire.mcnamara@microchip.com>
2022-01-03PCI: mediatek-gen3: Rename mtk_pcie_port to mtk_gen3_pcieFan Fei1-186/+186
Rename struct mtk_pcie_port to mtk_gen3_pcie to match the convention of <driver>_pcie. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-15-helgaas@kernel.org Signed-off-by: Fan Fei <ffclaire1224@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Jianjun Wang <jianjun.wang@mediatek.com>
2022-01-03PCI: ls-gen4: Rename ls_pcie_g4 to ls_g4_pcieBjorn Helgaas1-42/+42
Rename struct ls_pcie_g4 to ls_g4_pcie to match the convention of <driver>_pcie. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-14-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2022-01-03PCI: iproc: Rename iproc_pcie_pltfm_ to iproc_pltfm_pcie_Bjorn Helgaas1-8/+8
Rename iproc_pcie_pltfm_* to iproc_pltfm_pcie_* for consistency with other drivers. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-13-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com>
2022-01-03PCI: iproc: Rename iproc_pcie_bcma_ to iproc_bcma_pcie_Bjorn Helgaas1-11/+11
Rename iproc_pcie_bcma_* to iproc_bcma_pcie_* for consistency with other drivers. No functional change intended. Link: https://lore.kernel.org/r/20211223011054.1227810-12-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.