aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-12-23mtd: spi-nor: core: use 2 data bytes for template opsPratyush Yadav1-2/+2
The template ops used in spi_nor_spimem_check_pp() and spi_nor_spimem_check_readop() currently set the data phase to 1 byte long. This is problematic for 8D-8D-8D protocol where odd length data phase is invalid since one cycle transfers 2 bytes and odd number of bytes would mean half a cycle is left over. This could result in a controller rejecting the op as "not supported" even though it actually supports the protocol. Change the data length to 2 bytes in these templates. One might argue that this should only be done for 8D-8D-8D operations but when talking about these templates, there is no functional difference between one and two bytes, even in STR modes. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20210531181757.19458-2-p.yadav@ti.com
2021-12-23drm/i915/fbc: Remember to update FBC state even when not reallocating CFBVille Syrjälä1-1/+3
We mustn't forget to update our FBC state even if we don't have to reallocate the CFB. Otherwise we won't refresh our notion of what eg. the new fence or the new override CFB stride should be. Using the wrong CFB stride in particular can cause underruns and could even corrupt other stuff in stolen. Fixes: f4cfdbb02ca8 ("drm/i915/fbc: Nuke state_cache") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4774 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216110822.8461-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-23dt-bindings:iio:adc: update the maintainer of vf610-adcHaibo Chen1-1/+1
Drop Fugang Duan as the vf610-adc maintainer, and add my self as the maintainer. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1640073000-32629-2-git-send-email-haibo.chen@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-23MAINTAINERS: add imx7d/imx6sx/imx6ul/imx8qxp and vf610 adc maintainerHaibo Chen1-0/+12
Add myself as imx7d/imx6sx/imx6ul/imx8qxp and vf610 adc maintainer. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/1640073000-32629-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-23Documentation:ABI:testing:admv1013: add ABI docsAntoniu Miclaus1-0/+38
Add documentation for the use of the Local Oscillator Feedthrough Offset calibration. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20211221112206.97066-3-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-23dt-bindings: iio: frequency: add admv1013 docAntoniu Miclaus1-0/+91
Add device tree bindings for the ADMV1013 Upconverter. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211221112206.97066-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-23iio: frequency: admv1013: add support for ADMV1013Antoniu Miclaus3-0/+667
The ADMV1013 is a wideband, microwave upconverter optimized for point to point microwave radio designs operating in the 24 GHz to 44 GHz radio frequency (RF) range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1013.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20211221112206.97066-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-23powerpc/perf: Fix spelling of "its"Randy Dunlap1-1/+1
Use the possessive "its" instead of the contraction of "it is" (it's). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211223003942.22098-1-rdunlap@infradead.org
2021-12-23powerpc/32: Fix boot failure with GCC latent entropy pluginChristophe Leroy2-0/+4
Boot fails with GCC latent entropy plugin enabled. This is due to early boot functions trying to access 'latent_entropy' global data while the kernel is not relocated at its final destination yet. As there is no way to tell GCC to use PTRRELOC() to access it, disable latent entropy plugin in early_32.o and feature-fixups.o and code-patching.o Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217 Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftestsChristophe Leroy2-40/+53
The purpose of selftests is to check that instructions are properly formed. Not to check that they properly run. For that test it uses normal memory, not special test memory. In preparation of a future patch enforcing patch_instruction() to be used only on valid text areas, implement a ppc_inst_write() instruction which is the complement of ppc_inst_read(). This new function writes the formated instruction in valid kernel memory and doesn't bother about icache. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7cf5335cc07ca9b6f8cdaa20ca9887fce4df3bea.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Move code patching selftests in its own fileChristophe Leroy3-355/+359
Code patching selftests are half of code-patching.c. As they are guarded by CONFIG_CODE_PATCHING_SELFTESTS, they'd be better in their own file. Also add a missing __init for instr_is_branch_to_addr() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c0c30504f04eb546a48ff77127a8bccd12a3d809.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.hChristophe Leroy2-15/+15
To enable moving selftests in their own C file in following patch, move instr_is_branch_iform() and instr_is_branch_bform() to code-patching.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/fca0f3b191211b3681020885a611bf73eef20563.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Move patch_exception() outside code-patching.cChristophe Leroy5-23/+25
patch_exception() is dedicated to book3e/64 is nothing more than a normal use of patch_branch(), so move it into a place dedicated to book3e/64. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0968622b98b1fb51838c35b844c42ad6609de62e.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Use test_trampoline for prefixed patch testChristophe Leroy3-36/+10
Use the dedicated test_trampoline function for testing prefixed patching like other tests and remove the hand coded assembly stuff. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a450ef3f8653f75e1bd9aaf7a3889d379752f33b.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Fix patch_branch() return on out-of-range failureChristophe Leroy1-1/+3
Do not silentely ignore a failure of create_branch() in patch_branch(). Return -ERANGE. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8540cb64b1f06710eaf41e3835c7ba3e21fa2b05.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Reorganise do_patch_instruction() to ease error handlingChristophe Leroy1-16/+21
Split do_patch_instruction() in two functions, the caller doing the spin locking and the callee doing everything else. And remove a few unnecessary initialisations and intermediate variables. This allows the callee to return from anywhere in the function. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/dbc85980a0d2a935731b272e8907e8bb1d8fc8c5.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Fix unmap_patch_area() error handlingChristophe Leroy1-17/+13
pXd_offset() doesn't return NULL. When the base is NULL, it still adds the offset. Use pXd_none() to check validity instead. It also improves performance by folding out none existing levels as pXd_none() always returns 0 in that case. Such an error is unexpected, use WARN_ON() so that the caller doesn't have to worry about it, and drop the returned value. And now that unmap_patch_area() doesn't return error, we can take into account the error returned by __patch_instruction(). While at it, remove the 'inline' property which is useless. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/299804b117fae35c786c827536c91f25352e279b.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Fix error handling in do_patch_instruction()Christophe Leroy1-10/+3
Use real errors instead of using -1 as error, so that errors returned by callees can be used towards callers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/85259d894069e47f915ea580b169e1adbeec7a61.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Remove init_mem_is_freeChristophe Leroy3-5/+1
A new state has been added by commit d2635f2012a4 ("mm: create a new system state and fix core_kernel_text()"). That state tells when initmem is about to be released and is redundant with init_mem_is_free. Remove init_mem_is_free. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ad8c3ccb39c8edaa89fd3eda1cc7218baea1cde5.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/code-patching: Remove pr_debug()/pr_devel() messages and fix check()Christophe Leroy1-9/+7
code-patching has been working for years now, time has come to remove debugging messages. Change useful message to KERN_INFO and remove other ones. Also add KERN_ERR to check() macro and change it into a do/while to make checkpatch happy. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3ff9823c0a812a8a145d979a9600a6d4591b80ee.1638446239.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/mm/book3s64/hash: Switch pre 2.06 tlbiel to .longAlexey Kardashevskiy2-2/+4
The llvm integrated assembler does not recognise the ISA 2.05 tlbiel version. Work around it by switching to .long when an old arch level detected. Signed-off-by: Daniel Axtens <dja@axtens.net> [aik: did "Eventually do this more smartly"] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-7-aik@ozlabs.ru
2021-12-23powerpc/mm: Switch obsolete dssall to .longAlexey Kardashevskiy8-10/+12
The dssall ("Data Stream Stop All") instruction is obsolete altogether with other Data Cache Instructions since ISA 2.03 (year 2006). LLVM IAS does not support it but PPC970 seems to be using it. This switches dssall to .long as there is no much point in fixing LLVM. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
2021-12-23powerpc/64/asm: Do not reassign labelsDaniel Axtens4-33/+31
The LLVM integrated assembler really does not like us reassigning things to the same label: <instantiation>:7:9: error: invalid reassignment of non-absolute variable 'fs_label' This happens across a bunch of platforms: https://github.com/ClangBuiltLinux/linux/issues/1043 https://github.com/ClangBuiltLinux/linux/issues/1008 https://github.com/ClangBuiltLinux/linux/issues/920 https://github.com/ClangBuiltLinux/linux/issues/1050 There is no hope of getting this fixed in LLVM (see https://github.com/ClangBuiltLinux/linux/issues/1043#issuecomment-641571200 and https://bugs.llvm.org/show_bug.cgi?id=47798#c1 ) so if we want to build with LLVM_IAS, we need to hack around it ourselves. For us the big problem comes from this: \#define USE_FIXED_SECTION(sname) \ fs_label = start_##sname; \ fs_start = sname##_start; \ use_ftsec sname; \#define USE_TEXT_SECTION() fs_label = start_text; \ fs_start = text_start; \ .text and in particular fs_label. This works around it by not setting those 'variables' and requiring that users of the variables instead track for themselves what section they are in. This isn't amazing, by any stretch, but it gets us further in the compilation. Note that even though users have to keep track of the section, using a wrong one produces an error with both binutils and llvm which prevents from using wrong section at the compile time: llvm error example: AS arch/powerpc/kernel/head_64.o <unknown>:0: error: Cannot represent a difference across sections make[3]: *** [/home/aik/p/kernels-llvm/llvm/scripts/Makefile.build:388: arch/powerpc/kernel/head_64.o] Error 1 binutils error example: /home/aik/p/kernels-llvm/llvm/arch/powerpc/kernel/exceptions-64s.S: Assembler messages: /home/aik/p/kernels-llvm/llvm/arch/powerpc/kernel/exceptions-64s.S:1974: Error: can't resolve `system_call_common' {.text section} - `start_r eal_vectors' {.head.text.real_vectors section} make[3]: *** [/home/aik/p/kernels-llvm/llvm/scripts/Makefile.build:388: arch/powerpc/kernel/head_64.o] Error 1 Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-5-aik@ozlabs.ru
2021-12-23powerpc/64/asm: Inline BRANCH_TO_C000Alexey Kardashevskiy1-14/+3
It is used just once and does not really help with readability, remove it. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-4-aik@ozlabs.ru
2021-12-23powerpc: check for support for -Wa,-m{power4,any}Daniel Axtens1-1/+3
LLVM's integrated assembler does not like either -Wa,-mpower4 or -Wa,-many. So just don't pass them if they're not supported. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-3-aik@ozlabs.ru
2021-12-23powerpc/toc: Future proof kernel tocAlan Modra6-21/+17
This patch future-proofs the kernel against linker changes that might put the toc pointer at some location other than .got+0x8000, by replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's idea of the toc pointer doesn't agree with the linker, bad things happen. prom_init.c code relocating its toc is also changed so that a symbolic __prom_init_toc_start toc-pointer relative address is calculated rather than assuming that it is always at toc-pointer - 0x8000. The length calculations loading values from the toc are also avoided. It's a little incestuous to do that with unreloc_toc picking up adjusted values (which is fine in practice, they both adjust by the same amount if all goes well). I've also changed the way .got is aligned in vmlinux.lds and zImage.lds, mostly so that dumping out section info by objdump or readelf plainly shows the alignment is 256. This linker script feature was added 2005-09-27, available in FSF binutils releases from 2.17 onwards. Should be safe to use in the kernel, I think. Finally, put *(.got) before the prom_init.o entry which only needs *(.toc), so that the GOT header goes in the correct place. I don't believe this makes any difference for the kernel as it would for dynamic objects being loaded by ld.so. That change is just to stop lusers who blindly copy kernel scripts being led astray. Of course, this change needs the prom_init.c changes. Some notes on .toc and .got. .toc is a compiler generated section of addresses. .got is a linker generated section of addresses, generally built when the linker sees R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are multiple generated .got sections, one per input object file. So you can somewhat reasonably write in a linker script an input section statement like *prom_init.o(.got .toc) to mean "the .got and .toc section for files matching *prom_init.o". On other architectures that doesn't make sense, because the linker generally has just one .got section. Even on powerpc64, note well that the GOT entries for prom_init.o may be merged with GOT entries from other objects. That means that if prom_init.o references, say, _end via some GOT relocation, and some other object also references _end via a GOT relocation, the GOT entry for _end may be in the range __prom_init_toc_start to __prom_init_toc_end and if the kernel does something special to GOT/TOC entries in that range then the value of _end as seen by objects other than prom_init.o will be affected. On the other hand the GOT entry for _end may not be in the range __prom_init_toc_start to __prom_init_toc_end. Which way it turns out is deterministic but a detail of linker operation that should not be relied on. A feature of ld.bfd is that input .toc (and .got) sections matching one linker input section statement may be sorted, to put entries used by small-model code first, near the toc base. This is why scripts for powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since the first form allows more freedom to sort. Another feature of ld.bfd is that indirect addressing sequences using the GOT/TOC may be edited by the linker to relative addressing. In many cases relative addressing would be emitted by gcc for -mcmodel=medium if you appropriately decorate variable declarations with non-default visibility. The original patch is here: https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/ Signed-off-by: Alan Modra <amodra@au1.ibm.com> [aik: removed non-relocatable which is gone in 24d33ac5b8ffb] [aik: added <=2.24 check] [aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
2021-12-23cuda/pmu: Make find_via_cuda/pmu init functionsNick Child3-4/+4
Make `find_via_cuda` and `find_via_pmu` initialization functions. Previously, their definitions in `drivers/macintosh/via-cuda.h` include the `__init` attribute but their alternative definitions in `arch/powerpc/powermac/sectup./c` and prototypes in `include/linux/ cuda.h` and `include/linux/pmu.h` do not use the `__init` macro. Since, only initialization functions call `find_via_cuda` and `find_via_pmu` it is safe to label these functions with `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-21-nick.child@ibm.com
2021-12-23powerpc/512x: Add __init attribute to eligible functionsNick Child3-30/+30
Some functions defined in 'arch/powerpc/platforms/512x' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-20-nick.child@ibm.com
2021-12-23powerpc/85xx: Add __init attribute to eligible functionsNick Child5-6/+6
Some functions defined in 'arch/powerpc/platforms/85xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-19-nick.child@ibm.com
2021-12-23powerpc/83xx: Add __init attribute to eligible functionsNick Child6-10/+10
Some functions defined in 'arch/powerpc/platforms/83xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-18-nick.child@ibm.com
2021-12-23powerpc/embedded6xx: Add __init attribute to eligible functionsNick Child5-7/+7
Some functions defined in 'arch/powerpc/platforms/embedded6xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-17-nick.child@ibm.com
2021-12-23powerpc/44x: Add __init attribute to eligible functionsNick Child1-2/+2
Some functions defined in 'arch/powerpc/platforms/44x/' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-16-nick.child@ibm.com
2021-12-23powerpc/4xx: Add __init attribute to eligible functionsNick Child2-3/+3
Some functions defined in 'arch/powerpc/platforms/4xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-15-nick.child@ibm.com
2021-12-23powerpc/ps3: Add __init attribute to eligible functionsNick Child7-24/+24
Some functions defined in 'arch/powerpc/platforms/ps3' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-14-nick.child@ibm.com
2021-12-23powerpc/pseries: Add __init attribute to eligible functionsNick Child11-18/+18
Some functions defined in 'arch/powerpc/platforms/pseries' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-13-nick.child@ibm.com
2021-12-23powerpc/powernv: Add __init attribute to eligible functionsNick Child15-28/+28
Some functions defined in 'arch/powerpc/platforms/powernv' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-12-nick.child@ibm.com
2021-12-23powerpc/powermac: Add __init attribute to eligible functionsNick Child8-11/+11
Some functions defined in 'arch/powerpc/platforms/powermac` are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-11-nick.child@ibm.com
2021-12-23powerpc/pasemi: Add __init attribute to eligible functionsNick Child5-5/+5
Some functions defined in 'arch/powerpc/platforms/pasemi' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-10-nick.child@ibm.com
2021-12-23powerpc/chrp: Add __init attribute to eligible functionsNick Child1-1/+1
The function `Enable_SRAM` defined in 'arch/powerpc/platforms/chrp' is deserving of an `__init` macro attribute. This function is only called by other initialization functions and therefore should inherit the attribute. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-9-nick.child@ibm.com
2021-12-23powerpc/cell: Add __init attribute to eligible functionsNick Child5-20/+20
Some functions defined in 'arch/powerpc/platforms/cell' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-8-nick.child@ibm.com
2021-12-23powerpc/xmon: Add __init attribute to eligible functionsNick Child2-2/+2
`xmon_register_spus` defined in 'arch/powerpc/xmon' is deserving of an `__init` macro attribute. This functions is only called by other initialization functions and therefore should inherit the attribute. Also, change the function declaration in the header file to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-7-nick.child@ibm.com
2021-12-23powerpc/sysdev: Add __init attribute to eligible functionsNick Child24-40/+40
Some files functions in 'arch/powerpc/sysdev' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-6-nick.child@ibm.com
2021-12-23powerpc/perf: Add __init attribute to eligible functionsNick Child12-20/+20
Some functions defined in 'arch/powerpc/perf' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-5-nick.child@ibm.com
2021-12-23powerpc/mm: Add __init attribute to eligible functionsNick Child13-20/+20
Some functions defined in 'arch/powerpc/mm' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-4-nick.child@ibm.com
2021-12-23powerpc/lib: Add __init attribute to eligible functionsNick Child3-15/+15
Some functions defined in 'arch/powerpc/lib' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-3-nick.child@ibm.com
2021-12-23powerpc/kernel: Add __init attribute to eligible functionsNick Child24-68/+69
Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/ kexec`) are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
2021-12-23drm/i915: Use trylock instead of blocking lock for __i915_gem_free_objects.Maarten Lankhorst2-6/+12
Convert free_work into delayed_work, similar to ttm to allow converting the blocking lock in __i915_gem_free_objects to a trylock. Unlike ttm, the object should already be idle, as it's kept alive by a reference through struct i915_vma->active, which is dropped after all vma's are idle. Because of this, we can use a no wait by default, or when the lock is contested, we use ttm's 10 ms. The trylock should only fail when the object is sharing it's resv with other objects, and typically objects are not kept locked for a long time, so we can safely retry on failure. Fixes: be7612fd6665 ("drm/i915: Require object lock when freeing pages during destruction") Testcase: igt/gem_exec_alignment/pi* Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211222155622.2960379-1-maarten.lankhorst@linux.intel.com
2021-12-23phy: phy-rockchip-inno-usb2: add rk3568 supportPeter Geis1-0/+65
The rk3568 usb2phy is a standalone device with a single muxed interrupt. Add support for the registers to the usb2phy driver. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-7-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support muxed interruptsPeter Geis1-49/+119
The rk3568 usb2phy has a single muxed interrupt that handles all interrupts. Allow the driver to plug in only a single interrupt as necessary. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-6-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support standalone phy nodesPeter Geis1-5/+12
New Rockchip devices have the usb2 phy devices as standalone nodes instead of children of the grf node. Allow the driver to find the grf node from a phandle. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-5-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>