| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a spelling mistake in a dev_dbg message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Fix the following coccicheck warning:
./drivers/misc/habanalabs/gaudi2/gaudi2.c:9727:48-53: WARNING:
conversion to bool not needed here
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Change is_idle functions so it would be more usable outside debugfs.
Do this by replacing seq_file parameter with regular string.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, two of these tests set nid != NUMA_NO_NODE. All tests are
run for both top-down and bottom-up allocation directions.
The tested scenarios are:
Range unrestricted:
- region cannot be allocated:
+ none of the nodes have enough memory to allocate the region
Range restricted:
- region can be allocated in the specific node requested without dropping
min_addr:
+ the range fully overlaps with the node, and there are adjacent
reserved regions
- region cannot be allocated:
+ nid is set to NUMA_NO_NODE and the total range can fit the region,
but the range is split between two nodes and everything else is
reserved
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4b2c7e6e5f3a9837939e99293c77e0e6fc3ae4f9.1663046060.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a bottom-up allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/00c4810daaf5d050abc71915b24ed7419bb16b51.1663046060.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a top-down allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/84009c5b3969337ccf89df850db56d364f8c228b.1663046060.git.remckee0@gmail.com
|
|
Add function setup_numa_memblock() for setting up a memory layout with
multiple NUMA nodes in a previously allocated dummy physical memory.
This function can be used in place of setup_memblock() in tests that need
to simulate a NUMA system.
setup_numa_memblock():
- allows for setting up a memory layout by specifying the fraction of
MEM_SIZE in each node
Set CONFIG_NODES_SHIFT to 4 when building with NUMA=1 to allow for up to
16 NUMA nodes.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4566d816a85f009268d4858d1ef06c7571a960f9.1663046060.git.remckee0@gmail.com
|
|
From: Naveen Mamindlapalli <naveenm@marvell.com>
To: <kuba@kernel.org>, <davem@davemloft.net>, <edumazet@google.com>,
<pabeni@redhat.com>, <richardcochran@gmail.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<sgoutham@marvell.com>, <hkelam@marvell.com>
Cc: Naveen Mamindlapalli <naveenm@marvell.com>
Subject: [net-next PATCH 0/4] Add PTP support for CN10K silicon
Date: Sat, 10 Sep 2022 13:24:12 +0530 [thread overview]
Message-ID: <20220910075416.22887-1-naveenm@marvell.com> (raw)
This patchset adds PTP support for CN10K silicon, specifically
to workaround few hardware issues and to add 1-step mode.
Patchset overview:
Patch #1 returns correct ptp timestamp in nanoseconds captured
when external timestamp event occurs.
Patch #2 adds 1-step mode support.
Patch #3 implements software workaround to generate PPS output properly.
Patch #4 provides a software workaround for the rollover register default
value, which causes ptp to return the wrong timestamp.
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the reset value of PTP_SEC_ROLLOVER is incorrect on
CNF10KB silicon, the ptp timestamps are inaccurate. This
patch initializes the PTP_SEC_ROLLOVER register properly
for the CNF10KB silicon.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Errata:
The ptp_clock_hi rollsover to zero one clock cycle before it
reaches one second boundary. As a result, the pps threshold
comparison fails after one second and the pps output signal
won't toggle further.
This patch workarounds the issue by programming the pps_lo_incr
register to 500msec minus one clock cycle period, ensuring that
the pps threshold comparison succeeds at one second rollover
boundary and pps edge toggles. After that point, the driver will
have enough time (~500msec) to reset the pps threshold value.
After each one second boundary, hrtimer is invoked which resets
the pps threshold value.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for ptp 1-step mode using timecounter. The seconds and
nanoseconds to be updated in PTP header are calculated by adding the
timecounter offset to the free running PTP clock counter time. The PF
driver periodically gets the PTP clock time using AF mbox. The 1-step
support uses HW feature to update correction field rather than
OriginTimestamp field in PTP header.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MIO_PTP_TIMESTAMP format has been changed in CN10K silicon
family. The upper 32-bits represents seconds and lower 32-bits
represents nanoseconds. This patch returns nanosecond timestamp
to NIX PF driver.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit ed5c2f5fd10d ("i2c: Make remove callback return void") changed
the prototype of ams_i2c_remove() but failed to adapt the declaration.
Catch up and fix the declaration accordingly.
Fixes: ed5c2f5fd10d ("i2c: Make remove callback return void")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
IRQF_ONESHOT is not needed so remove it.
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
memcpy() is called in a loop while 'operation->length' upper bound
is not checked and 'data_idx' also increments.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Correct the base address used during io write.
This bug had no impact over the overall functionality of the read and write
transactions. MLXBF_I2C_CAUSE_OR_CLEAR=0x18 so writing to (smbus->io + 0x18)
instead of (mst_cause->ioi + 0x18) actually writes to the sc_low_timeout
register which just sets the timeout value before a read/write aborts.
Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Yet another x86 gaming handheld.
This one has many SKUs with quite a few of DMI strings,
so let's just use a catchall, just as with Aya Neo Next.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220825191946.1678798-1-maccraft123mc@gmail.com
|
|
This allows a client to receive messages in atomic context, by polling.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document dt-bindings for Rockchip RV1126 clock controller.
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220915163947.1922183-4-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
|
|
Add the dt-bindings header for the Rockchip RV1126, that gets shared
between the clock controller and the clock references in the dts.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220915163947.1922183-3-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The psb_runtime_suspend/resume/thaw/freeze/restore functions are all
just 1:1 wrappers around gma_power_suspend/_resume.
Drop these wrappers and use the DEFINE_RUNTIME_DEV_PM_OPS() macro to
define the dev_pm_ops struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-7-hdegoede@redhat.com
|
|
Rewrite the power.c code. For some reason this was doing locking +
refcounting + state (suspended or not) bookkeeping all by itself.
But there is no reason for this, this is all taken care of by
the runtime-pm core, through pm_runtime_get()/_put().
Besides this not being necessary the DIY code is also quite weird/
buggy in some places. E.g. power_begin() would manually do a resume
when not resumed already and force_on=true, followed by a
pm_runtime_get(), which will cause a call to gma_power_resume() to
get scheduled which would redo the entire resume again. Which can
all be replaced by a single pm_runtime_get_sync() call.
Note that this is just a cleanup, this does not actually fix
the (disabled through #if 0) runtime-pm support. It does now call
pm_runtime_enable(), but only after doing a pm_runtime_get() at
probe-time, so the device is never runtime suspended.
Doing this permanent get() + enable() instead of not calling
enable() at all is necessary for the pm_runtime_get_if_in_use() call
in gma_power_begin() to work properly.
Note this also removes the gma_power_is_on() call a check like this
without actually holding a reference is always racy, so it is a bad
idea (and therefor has no pm_runtime_foo() equivalent).
The 2 code paths which were using gma_power_is_on() are actually both
guaranteed to only run when the device is powered-on so the 2 checks
can simply be dropped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-6-hdegoede@redhat.com
|
|
The gma_crtc_set_config() and psb_unlocked_ioctl() functions are 1:1
wrappers for drm_helpers. Drop these wrappers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-5-hdegoede@redhat.com
|
|
The rpm_enabled flag is never set, remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-4-hdegoede@redhat.com
|
|
runtime_allowed is initialized to 0, so the runtime_allowed == 1 condition
is never true making this dead code. Remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-3-hdegoede@redhat.com
|
|
Fix gnome-shell (and other page-flip users) hanging after suspend/resume
because of the gma500's IRQs not working.
This fixes 2 problems with the IRQ handling:
1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but
gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which
do not call request_irq. Replace the pre- + post-install calls with
gma_irq_install() which does prep + request + post.
2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel
Atom N2600, cedarview) netbook.
Cederview uses MSI interrupts and it seems that the BIOS re-configures
things back to normal APIC based interrupts during S3 suspend. There is
some MSI PCI-config registers save/restore code which tries to deal with
this, but on the Packard Bell Dot SC this is not sufficient to restore
MSI IRQ functionality after a suspend/resume.
Replace the PCI-config registers save/restore with pci_disable_msi() on
suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com
(cherry picked from commit 235fdbc32d559db21e580f85035c59372704f09e)
|
|
The stub is used in different execution environments, but on arm64,
RISC-V and LoongArch, we still use the core kernel's implementation of
memcpy and memset, as they are just a branch instruction away, and can
generally be reused even from code such as the EFI stub that runs in a
completely different address space.
KAsan complicates this slightly, resulting in the need for some hacks to
expose the uninstrumented, __ prefixed versions as the normal ones, as
the latter are instrumented to include the KAsan checks, which only work
in the core kernel.
Unfortunately, #define'ing memcpy to __memcpy when building C code does
not guarantee that no explicit memcpy() calls will be emitted. And with
the upcoming zboot support, which consists of a separate binary which
therefore needs its own implementation of memcpy/memset anyway, it's
better to provide one explicitly instead of linking to the existing one.
Given that EFI exposes implementations of memmove() and memset() via the
boot services table, let's wire those up in the appropriate way, and
drop the references to the core kernel ones.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Define the correct prototypes for the load_image, start_image and
unload_image boot service pointers so we can call them from the EFI
zboot code.
Also add some prototypes related to installation and deinstallation of
protocols in to the EFI protocol database, including some definitions
related to device paths.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220824130226.33980-1-yuanjilin@cdjrlc.com
|
|
This device is another x86 gaming handheld, and as (hopefully) there is
only one set of DMI IDs it's using DMI_EXACT_MATCH
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803182402.1217293-1-maccraft123mc@gmail.com
|
|
remove the double world of 'in'.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
We could make the T-Head CMOs depend on a new-enough assembler to have
Zicbom, but it's not strictly necessary because the T-Head CMOs
circumvent the assembler.
Fixes: 8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915170900.22685-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix
really nasty sigreturn bug"); if signal gets caught by an interrupt that
hits when we have the right value in a0 (-513), *and* another signal
gets delivered upon sigreturn() (e.g. included into the blocked mask for
the first signal and posted while the handler had been running), the
syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are
in a syscall, after all) and a0 already restored to its original value
(-513, which happens to be -ERESTARTNOINTR) and assume that we need to
apply the usual syscall restart logics.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Both basic extensions of SVPBMT and ZICBOM depend on CONFIG_MMU.
Make the T-Head errata implementations of the similar functionality
also depend on it to prevent build errors.
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Fixes: d20ec7529236 ("riscv: implement cache-management errata for T-Head SoCs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220907154932.2858518-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISCV_ISA_SVPBMT selects RISCV_ALTERNATIVE which depends on !XIP_KERNEL.
Therefore RISCV_ISA_SVPBMT should also depend on !XIP_KERNEL so
quieten this kconfig warning:
WARNING: unmet direct dependencies detected for RISCV_ALTERNATIVE
Depends on [n]: !XIP_KERNEL [=y]
Selected by [y]:
- RISCV_ISA_SVPBMT [=y] && 64BIT [=y] && MMU [=y]
Fixes: ff689fd21cb1 ("riscv: add RISC-V Svpbmt extension support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220709014929.14221-1-rdunlap@infradead.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The qspi flash in ls1046a QDS board can operate at 50MHz frequency.
Therefore, update the maximum supported freq in dts file.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is mmio based mdio mux function in the FPGA device on ls1046a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add scl-gpios property for i2c recovery and add SoC specific
compatible string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
These SoCs are really completely dma coherent in their entirety so add
the dma-coherent property at the soc level in the device tree and drop
the instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
These chips have a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set
the default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the big-endian property for LS1046A PCIe RC nodes.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the PME interrupt porperty and big-endian property in PCIe EP nodes.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable USB3 HW LPM feature for ls1046a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the missing node for rtc device under i2c and fix style problems at
the same time.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is mmio based mdio mux function in the FPGA device on ls1043a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it. Also connect the ethernet interfaces to
these phy interfaces.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Colin Ian King
Yang Li
Dani Liberman
Rebecca Mckeever
David S. Miller
Naveen Mamindlapalli
Hariprasad Kelam
Uwe Kleine-König
Lad Prabhakar
Asmaa Mnebhi
Arnd Bergmann
Maya Matuszczyk
Hector Martin
Jagan Teki
Heiko Stuebner
Hans de Goede
Ard Biesheuvel
Jilin Yuan
Deming Wang
Palmer Dabbelt
Al Viro
Randy Dunlap
Pankaj Bansal
Li Yang
Laurentiu Tudor
Hou Zhiqiang
Xiaowei Bao