| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.
This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there. In my
testing at least I don't see any problems on SDMA.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. In this case IH is initialized before GFX,
so there should be no issue.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add a compatible for the keys found on MT6331 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220914103021.43593-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the mtk-pmic-keys to DT schema format.
The old binding was missing documentation for key press/release
interrupts, even though it was supported in hardware and driver,
so support for the same was added during the conversion.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220914103021.43593-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The firmware location in linux-firmware has been changed to include the
SoC name. So use the updated location in Thinkpad devicetree.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220914073922.7145-1-manivannan.sadhasivam@linaro.org
|
|
As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220914153333.37701-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Let the core handle all the chipselect bakery and replace
transfer_one_message() by transfer_one() and prepare_message().
At the time being, there is fsl_spi_cs_control() to handle
chipselects. That function handles both GPIO and non-GPIO
chipselects. The GPIO chipselects will now be handled by
the core directly, so only handle non-GPIO chipselects and
hook it to ->set_cs
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/753266abafe81722d86c3ddb8bac8ef1cb00fe8c.1660829841.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the introduction of KUnit, IGT is no longer the only option to run
the DRM unit tests, as the tests can be run through kunit-tool or on
real hardware with CONFIG_KUNIT.
Therefore, remove the "igt_" prefix from the tests and replace it with
the "drm_test_" prefix, making the tests' names independent from the tool
used.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Acked-by: David Gow <davidgow@google.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220911191756.203118-2-mairacanal@riseup.net
|
|
The igt_check_drm_framebuffer_create is based on a loop that executes
tests for all createbuffer_tests test cases. This could be better
represented by parameterized tests, provided by KUnit.
So, convert the igt_check_drm_framebuffer_create into parameterized tests.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220911191756.203118-1-mairacanal@riseup.net
|
|
./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c:729:63-68:
WARNING: conversion to bool not needed here
Generated by: scripts/coccinelle/misc/boolconv.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These three functions are not used outside the function
dcn32_optc.c, so the modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:159:6: warning: no previous prototype for function 'optc32_phantom_crtc_post_enable'.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:218:6: warning: no previous prototype for ‘optc32_set_drr’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:193:6: warning: no previous prototype for ‘optc32_setup_manual_trigger’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2140
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These functions are not used outside the file dcn32_dccg.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:257:6: warning: no previous prototype for ‘dccg32_otg_drop_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:248:6: warning: no previous prototype for ‘dccg32_otg_add_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:211:6: warning: no previous prototype for ‘dccg32_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:136:6: warning: no previous prototype for ‘dccg32_set_dtbclk_dto’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2142
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:912:6: warning: no previous prototype for ‘hubbub32_force_wm_propagate_to_pipes’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:823:6: warning: no previous prototype for ‘hubbub32_wm_read_state’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:772:6: warning: no previous prototype for ‘hubbub32_init_watermarks’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:712:6: warning: no previous prototype for ‘hubbub32_force_usr_retraining_allow’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2141
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This symbol is not used outside of dcn32_mmhubbub.c, so marks it static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:103:6: warning: no previous prototype for ‘mmhubbub32_config_mcif_buf’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2145
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:223:6: warning: no previous prototype for ‘dccg314_set_valid_pixel_rate’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:184:6: warning: no previous prototype for ‘dccg314_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:140:6: warning: no previous prototype for ‘dccg314_set_dtbclk_dto’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2144
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This symbol is not used outside of dcn314_optc.c, so marks it static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:153:6: warning: no previous prototype for ‘optc314_phantom_crtc_post_enable’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2147
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This symbol is not used outside of dcn314_dio_stream_encoder.c, so marks
it static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dio_stream_encoder.c:84:6: warning: no previous prototype for ‘enc314_stream_encoder_dvi_set_stream_attribute’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2146
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These functions are not used outside the file dcn30_resource.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1949:6: warning: no previous prototype for ‘is_refresh_rate_support_mclk_switch_using_fw_based_vblank_stretch’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1919:5: warning: no previous prototype for ‘get_frame_rate_at_max_stretch_100hz’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2143
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.
This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there. In my
testing at least I don't see any problems on SDMA.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. In this case IH is initialized before GFX,
so there should be no issue.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new gpu_metrics_v2_3 to acquire average temperature info from SMU metrics. To acquire average temp info from gpu_metrics interface, but gpu_metrics_v2_2 only has members to show current temp info.
---
v1:
Only add average_temperature_gfx in gpu_metrics_v2_3.
v2:
Add average temp members for soc, core and l3 in gpu_metrics_v2_3 and put these new members at the end of gpu_metrics_v2_3. Add operation to read average temp info from metrics table.
v3:
Merge v1 and v2 and rename the patch.
v4:
Merge v3. Add firmware version judgment in vangogh_common_get_gpu_metrics to maintain backward compatibility and rename the patch. "return ret" on error scenario in smu_cmn_get_smc_version.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The driver allocates reset GPIO in apple_pcie_setup_port() but neither
releases the resource, nor uses devm API to have it released
automatically.
Let's fix this by switching to devm API. While at it let's use generic
devm_fwnode_gpiod_get() instead of OF-specific gpiod_get_from_of_node()
- this will allow us top stop exporting the latter down the road.
Link: https://lore.kernel.org/r/YxatO5OaI2RpxQ2M@google.com
Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Acked-by: Marc Zyngier <maz@kernel.org>
|
|
Uninline copy_oldmem_kernel() function and make it consistent
with a very similar memcpy_real() implementation, by moving
to code to crash_dump.c, where it actually belongs.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add "Real Memory Copy Area Start" and "Real Memory Copy Area End"
markers that fence the page used for real memory copying.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Function memcpy_real() is an univeral data mover that does not
require DAT mode to be able reading from a physical address.
Its advantage is an ability to read from any address, even
those for which no kernel virtual mapping exists.
Although memcpy_real() is interrupt-safe, there are no handlers
that make use of this function. The compiler instrumentation
have to be disabled and separate no-DAT stack used to allow
execution of the function once DAT mode is disabled.
Rework memcpy_real() to overcome these shortcomings. As result,
data copying (which is primarily reading out a crashed system
memory by a user process) is executed on a regular stack with
enabled interrupts. Also, use of memcpy_real_buf swap buffer
becomes unnecessary and the swapping is eliminated.
The above is achieved by using a fixed virtual address range
that spans a single page and remaps that page repeatedly when
memcpy_real() is called for a particular physical address.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Function smp_save_dump_cpus() collects CPU state of a crashed
system for secondary CPUs and for the IPL CPU very differently.
The Signal Processor stop-and-store-status orders are used for
the former while Hardware System Area requests and memcpy_real()
routine are called for the latter. In addition a system reset is
triggered, which pins smp_save_dump_cpus() function call before
CPU and device initialization.
Move the collection of IPL CPU state to a later stage when DAT
becomes available. That is needed to allow a follow-up rework of
memcpy_real() routine.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
We use high_memory as a measure for amount of memory available in
determining the required minimum size of our IOVA space with the
assumption that one rarely maps more than the available memory for DMA.
In special cases like mapping significant amounts of memory more than
once this can still be tuned with the s390_iommu_apterture kernel
parameter. In this use case high_memory is treated as a physical
address. As high_memory is a virtual address however this means we need
to convert it using virt_to_phys() before use
Note that at the moment physical and virtual addresses are identical so
this mismatch does not currently cause trouble.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add "Lowcore Area Start" and "Lowcore Area End" markers
that fence pages where absolute lowcore resides.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Temporary unsetting of the prefix page in memcpy_absolute() routine
poses a risk of executing code path with unexpectedly disabled prefix
page. This rework avoids the prefix page uninstalling and disabling
of normal and machine check interrupts when accessing the absolute
zero memory.
Although memcpy_absolute() routine can access the whole memory, it is
only used to update the absolute zero lowcore. This rework therefore
introduces a new mechanism for the absolute zero lowcore access and
scraps memcpy_absolute() routine for good.
Instead, an area is reserved in the virtual memory that is used for
the absolute lowcore access only. That area holds an array of 8KB
virtual mappings - one per CPU. Whenever a CPU is brought online, the
corresponding item is mapped to the real address of the previously
installed prefix page.
The absolute zero lowcore access works like this: a CPU calls the
new primitive get_abs_lowcore() to obtain its 8KB mapping as a
pointer to the struct lowcore. Virtual address references to that
pointer get translated to the real addresses of the prefix page,
which in turn gets swapped with the absolute zero memory addresses
due to prefixing. Once the pointer is not needed it must be released
with put_abs_lowcore() primitive:
struct lowcore *abs_lc;
unsigned long flags;
abs_lc = get_abs_lowcore(&flags);
abs_lc->... = ...;
put_abs_lowcore(abs_lc, flags);
To ensure the described mechanism works large segment- and region-
table entries must be avoided for the 8KB mappings. Failure to do
so results in usage of Region-Frame Absolute Address (RFAA) or
Segment-Frame Absolute Address (SFAA) large page fields. In that
case absolute addresses would be used to address the prefix page
instead of the real ones and the prefixing would get bypassed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Currently smp_reinit_ipl_cpu() is a pre-SMP early initcall.
That ensures no CPU is running in parallel, but still not
enough to assume the code is exclusive, since the scheduling
is already available.
Move the function call to arch_call_rest_init() callback
to ensure no thread could be preempted and allow lockless
allocation of the kernel page tables. That is needed to
allow a follow-up rework of the absolute lowcore access
mechanism.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
* fixes:
s390/smp: enforce lowcore protection on CPU restart
s390/boot: fix absolute zero lowcore corruption on boot
s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages
s390: update defconfigs
s390: fix nospec table alignments
s390/mm: remove useless hugepage address alignment
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
These changes simplify the Makefile and handle these 5 ways to build
Landlock tests:
- make -C tools/testing/selftests/landlock
- make -C tools/testing/selftests TARGETS=landlock gen_tar
- make TARGETS=landlock kselftest-gen_tar
- make TARGETS=landlock O=build kselftest-gen_tar
- make -C /tmp/linux TARGETS=landlock O=/tmp/build kselftest-gen_tar
This also makes $(KHDR_INCLUDES) available to other test collections
when building in their directory.
Fixes: f1227dc7d041 ("selftests/landlock: fix broken include of linux/landlock.h")
Fixes: 3bb267a36185 ("selftests: drop khdr make target")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220909103402.1501802-1-mic@digikod.net
|
|
This enables built-in 802.11ax Wi-Fi support.
Reviewed-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220901130552.26234-1-chui-hao.chiu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220914133355.3779364-3-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220914133355.3779364-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dev_err/dev_dbg() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220914133355.3779364-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In eukrea_tlv320_probe(), we need to hold the reference returned
from of_find_compatible_node() which has increased the refcount
and then call of_node_put() with it when done.
Fixes: 66f232908de2 ("ASoC: eukrea-tlv320: Add DT support.")
Co-authored-by: Kelin Wang <wangkelin2023@163.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A much better "unknown size" string pointer is available directly from
struct test, so use that instead of a global that isn't shared with
modules.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/YyCOHOchVuE/E7vS@dev-arch.thelio-3990X
Fixes: 875bfd5276f3 ("fortify: Add KUnit test for FORTIFY_SOURCE internals")
Cc: linux-hardening@vger.kernel.org
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
There have been a few changes since the patch ("arm64: dts: qcom: Add
LTE SKUs for sc7280-villager family")
* New firmware reports LTE boards as "SKU 512" now. Old firmware will
still report "SKU 0", but that's all pre-production and everyone
will update.
* It's been relaized that no "-rev0" boards were ever built that were
WiFi-only. Thus we don't two entries for -rev0.
Adjust the organization a bit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220829084732.2.I22e256d1ebac577a91fac44d1d12919be7111cd4@changeid
|
|
There have been a few changes since the patch ("dt-bindings: arm:
qcom: document sc7280 and villager board").
* New firmware reports LTE boards as "SKU 512" now. Old firmware will
still report "SKU 0", but that's all pre-production and everyone
will update.
* It's been relaized that no "-rev0" boards were ever built that were
WiFi-only. Thus we don't two entries for -rev0.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220829084732.1.I9ef7f8b909a7afbef9ff2251a98c67033f37b516@changeid
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/all/20220914134030.3782754-1-yangyingliang@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When an external device generated a level based interrupt then the
interrupt controller could miss the interrupt. The reason is that the
interrupt controller can detect only link changes.
In the following example, if there is a PHY that generates an interrupt
then the following would happen. The GPIO detected that the interrupt
line changed, and then the 'ocelot_irq_handler' was called. Here it
detects which GPIO line saw the change and for that will call the
following:
1. irq_mask
2. phy interrupt routine
3. irq_eoi
4. irq_unmask
And this works fine for simple cases, but if the PHY generates many
interrupts, for example when doing PTP timestamping, then the following
could happen. Again the function 'ocelot_irq_handler' will be called
and then from here the following could happen:
1. irq_mask
2. phy interrupt routine
3. irq_eoi
4. irq_unmask
Right before step 3(irq_eoi), the PHY will generate another interrupt.
Now the interrupt controller will acknowledge the change in the
interrupt line. So we miss the interrupt.
A solution will be to use 'handle_level_irq' instead of
'handle_fasteoi_irq', because for this will change routine order of
handling the interrupt.
1. irq_mask
2. irq_ack
3. phy interrupt routine
4. irq_unmask
And now if the PHY will generate a new interrupt before irq_unmask, the
interrupt controller will detect this because it already acknowledge the
change in interrupt line at step 2(irq_ack).
But this is not the full solution because there is another issue. In
case there are 2 PHYs that share the interrupt line. For example phy1
generates an interrupt, then the following can happen:
1.irq_mask
2.irq_ack
3.phy0 interrupt routine
4.phy1 interrupt routine
5.irq_unmask
In case phy0 will generate an interrupt while clearing the interrupt
source in phy1, then the interrupt line will be kept down by phy0. So
the interrupt controller will not see any changes in the interrupt line.
The solution here is to update 'irq_unmask' such that it can detect if
the interrupt line is still active or not. And if it is active then call
again the procedure to clear the interrupts. But we don't want to do it
every time, only if we know that the interrupt controller has not seen
already that the interrupt line has changed.
While at this, add support also for IRQ_TYPE_LEVEL_LOW.
Fixes: be36abb71d878f ("pinctrl: ocelot: add support for interrupt controller")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220909145942.844102-1-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add wifi pins in the description and set 'maxItems' for groups and pins.
Reviewed-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220912092440.21011-1-chui-hao.chiu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Release all mmap mapping for all lmem objects which are associated
with userfault such that, while pcie function in D3hot, any access
to memory mappings will raise a userfault.
Runtime resume the dgpu(when gem object lies in lmem).
This will transition the dgpu graphics function to D0
state if it was in D3 in order to access the mmap memory
mappings.
v2:
- Squashes the patches. [Matt Auld]
- Add adequate locking for lmem_userfault_list addition. [Matt Auld]
- Reused obj->userfault_count to avoid double addition. [Matt Auld]
- Added i915_gem_object_lock to check
i915_gem_object_is_lmem. [Matt Auld]
v3:
- Use i915_ttm_cpu_maps_iomem. [Matt Auld]
- Fix 'ret == 0 to ret == VM_FAULT_NOPAGE'. [Matt Auld]
- Reuse obj->userfault_count as a bool 0 or 1. [Matt Auld]
- Delete the mmaped obj from lmem_userfault_list in obj
destruction path. [Matt Auld]
- Get a wakeref for object destruction patch. [Matt Auld]
- Use intel_wakeref_auto to delay runtime PM. [Matt Auld]
v4:
- Avoid using mmo offset to get the vma_node. [Matt Auld]
- Added comment to use the lmem_userfault_lock. [Matt Auld]
- Get lmem_userfault_lock in i915_gem_object_release_mmap_offset.
[Matt Auld]
- Fixed kernel test robot generated warning.
v5:
- Addressed the cosmetics comments. [Andi]
- Changed i915_gem_runtime_pm_object_release_mmap_offset() name to
i915_gem_object_runtime_pm_release_mmap_offset() to be rhythmic.
PCIe Specs 5.3.1.4.1
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6331
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913152714.16541-3-anshuman.gupta@intel.com
|
|
Refactor userfault_wakeref to re-use for discrete lmem mmap mapping
as well, as on discrete GTT mmap are not supported. Moving
userfault_wakeref from ggtt to gt structure.
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913152714.16541-2-anshuman.gupta@intel.com
|
|
At the time this was submitted by Leonardo, I confirmed -- or thought
I had confirmed -- with PowerVM partition firmware development that
the following RTAS functions:
- ibm,get-xive
- ibm,int-off
- ibm,int-on
- ibm,set-xive
were safe to call on multiple CPUs simultaneously, not only with
respect to themselves as indicated by PAPR, but with arbitrary other
RTAS calls:
https://lore.kernel.org/linuxppc-dev/875zcy2v8o.fsf@linux.ibm.com/
Recent discussion with firmware development makes it clear that this
is not true, and that the code in commit b664db8e3f97 ("powerpc/rtas:
Implement reentrant rtas call") is unsafe, likely explaining several
strange bugs we've seen in internal testing involving DLPAR and
LPM. These scenarios use ibm,configure-connector, whose internal state
can be corrupted by the concurrent use of the "reentrant" functions,
leading to symptoms like endless busy statuses from RTAS.
Fixes: b664db8e3f97 ("powerpc/rtas: Implement reentrant rtas call")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220907220111.223267-1-nathanl@linux.ibm.com
|
|
Noticed this while trying to debug some unrelated issues: this laptop has
the ability to use rmi4 but doesn't by default. So let's fix that.
Tested locally, including mouse buttons, on my ThinkPad P1 G3. This might
also enable the X1 Extreme G3, but I don't have such a system to test
locally (presumably Mark can chime in if that's the case).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20220909202127.141761-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Samsung pinctrl drivers changes for v6.1
1. Minor fix in order of initializing pinctrl driver - GPIOs should be
configured before registering gpiolib.
2. Final steps to deprecated bindings headers with register constants.
The constants were moved to include files in DTS directories, because
these are not suitable for bindings. Remove final references and
mark binding header as deprecated to warn any users.
|
Alex Deucher
AngeloGioacchino Del Regno
Manivannan Sadhasivam
Andy Shevchenko
Christophe Leroy
Maíra Canal
Yihao Han
Jiapeng Chong
Li Ma
Dmitry Torokhov
Alexander Gordeev
Niklas Schnelle
Vasily Gorbik
Mickaël Salaün
Peter Chiu
Yang Yingliang
Liang He
Kees Cook
Douglas Anderson
Horatiu Vultur
Anshuman Gupta
Nathan Lynch
Lyude Paul
Linus Walleij