| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If CPU page fault in a page with zone_device_data svm_bo from another
process, that means it is COW mapping in the child process and the
range is migrated to VRAM by parent process. Migrate the parent
process range back to system memory to recover the CPU page fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Delete the redundant word 'to'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For SRIOV configuration, host driver control the reset method(either FLR or
heavier chain reset). The host will notify the guest individually with FLR
message if individual GPU within the hive need to be reset. So for guest
side, no need to use hive->reset_domain to replace the original per
device reset_domain
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The 10.3 GC headers were missing most of the pwrdec block.
This patch adds the registers and bits present in the 10.1 header
but based on the contents of the 10.3 specs.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Recently introduced change to allocate doorbells only when the first
queue is created or mapped for CPU / GPU access, did not consider
Checkpoint Restore scenario completely. This fix allows the CRIU restore
operation by extending the doorbell optimization to CRIU restore
scenario.
Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use
drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs
struct.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As per PCIE Base Spec r4.0 Section 6.18
'Software must not enable LTR in an Endpoint unless the Root Complex
and all intermediate Switches indicate support for LTR.'
This fixes the Unsupported Request error reported through AER during
ASPM enablement.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Reported-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To avoid hardware intermittent failures.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for PMIC Keys of the MT6331 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220913123941.385349-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
In an effort to give some love to the apparently forgotten MT6795 SoC,
I am upstreaming more components that are necessary to support platforms
powered by this one apart from a simple boot to serial console.
This series adds support for the regulators found in MT6331 and MT6332
main/companion PMICs.
Adding support to each driver in each subsystem is done in different
patch series as to avoid spamming uninteresting patches to maintainers.
Tested on a MT6795 Sony Xperia M5 (codename "Holly") smartphone.
|
|
Add rockchip,rk3128-usb2phy compatible string.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/d477a077-a68f-e752-5192-807db80a9e68@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the phy-ocelot-serdes device tree binding to the new YAML format.
Additionally, add the file to MAINTAINERS since the original file didn't
exist.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220911163715.4036144-2-colin.foster@in-advantage.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a property to control the driving of ADCOUT.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220913120641.792502-2-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a property to control the driving of ADCOUT.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220913120641.792502-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n,
gcc warns about an unused variable:
sound/soc/intel/skylake/skl.c: In function ‘probe_codec’:
sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable]
struct skl_dev *skl = bus_to_skl(bus);
^~~
cc1: all warnings being treated as errors
Fixes: 3fd63658caed9 ("ASoC: Intel: Drop hdac_ext usage for codec device creation")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the case when a codec device is probed before codec analog
controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in
a misleading error message
sun4i-codec 1c22c00.codec: Failed to register our card
even if the device is probed successfully later. Use dev_err_probe()
to demote the above error to a debug message.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
qcom,q6afe is already documented in soc/qcom/qcom,apr.yaml. The
version-based compatibles ("qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>")
are not used (neither in upstream nor in downstream DTS).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910090856.49271-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit b3821f7839c2ec3229 ("arm64: dts: mediatek:
kukui: Remove i2s-share properties") which was mistakenly applied
to the ASoC tree.
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of error, the function nvmem_cell_read() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220909094709.1790970-1-weiyongjun@huaweicloud.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There's some interactions between the SCDC setup and the disconnection /
reconnection of displays. Let's document it and a solution.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-9-maxime@cerno.tech
|
|
During a hotplug cycle (such as a TV going out of suspend, or when the
cable is disconnected and reconnected), the expectation is that the same
state used before the disconnection is reused until the next commit.
However, the HDMI scrambling requires that some flags are set in the
monitor, and those flags are very likely to be reset when the cable has
been disconnected. This will thus result in a blank display, even if the
display pipeline configuration hasn't been modified or is in the exact
same state.
The solution we've had so far is to enable the scrambling-related bits
again on reconnection, but the HDMI 2.0 specification (Section 6.1.3.1 -
Scrambling Control) requires that the scrambling enable bit is set
before sending any scrambled video signal. Using that solution thus
breaks that expectation.
The solution used by i915 is to do a full modeset on the connector so
that we disable the video signal, enable the scrambling bit, and enable
the video signal again.
As such, we took that code and plugged it into vc4. It probably could
have been turned into an helper, but it proved to be difficult for
several reasons:
* i915 has fairly different structures than simpler KMS drivers such
as vc4, so doing some code that works with both proved to be
difficult;
* Other simpler drivers could reuse some of it (tegra, dw-hdmi), but
it would still require to move some parameters currently stored in
private structure that are needed to compute whether the scrambling
is needed or not, and then inform the driver that it needs to be
enabled. Some of those parameters are already in core structures
(drm_display_mode, drm_display_info, bpc), but the output format
isnt't. Adding it is fairly challenging since unlike the TMDS char
rate or mode, there's no consensus on what format to pick in
drivers, so it's not possible to write some generic code that can
depend on it.
For these reasons, we chose to duplicate the code for now, until someone
else really needs it as well, in which case we will be able to convert
it into a generic helper.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-8-maxime@cerno.tech
|
|
We'll need it earlier in the driver, so let's move it next to the other
scrambling-related helpers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-7-maxime@cerno.tech
|
|
We'll need the locking context in future patch, so let's convert .detect
to .detect_ctx.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-6-maxime@cerno.tech
|
|
Our detect callback has a bunch of operations to perform depending on
the current and last status of the connector, such a setting the CEC
physical address or enabling the scrambling again.
This is currently dealt with a bunch of if / else statetements that make
it fairly difficult to read and extend.
Let's move all that logic to a function of its own.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-5-maxime@cerno.tech
|
|
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n,
gcc warns about an unused variable:
sound/soc/intel/skylake/skl.c: In function ‘probe_codec’:
sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable]
struct skl_dev *skl = bus_to_skl(bus);
^~~
cc1: all warnings being treated as errors
Fixes: 3fd63658caed9 ("ASoC: Intel: Drop hdac_ext usage for codec device creation")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We recently introduced a new mutex to protect concurrent execution of
ALSA and KMS hooks, and the concurrent access to some of vc4_hdmi
fields.
However, using it in the detect hook was creating a reentrency issue
with CEC code. Indeed, calling cec_s_phys_addr_from_edid from detect
might call the CEC adap_enable hook with the lock held, eventually
resulting in a deadlock.
Since we didn't really need to protect anything at the moment in the CEC
code, the decision was made to ignore the mutex in those CEC hooks,
working around the issue.
However, we can have the same thing happening if we end up triggering a
mode set from the detect callback, for example using
drm_atomic_helper_connector_hdmi_reset_link().
Since we don't really need to protect anything in detect either, let's
just drop the lock in detect, and add it again in CEC.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-4-maxime@cerno.tech
|
|
Even though vc4_hdmi_supports_scrambling takes a mode as an argument, it
never uses it. Let's remove it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-3-maxime@cerno.tech
|
|
We don't modify the drm_display_mode pointer we have in the driver in
most places, so let's make them const.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-2-maxime@cerno.tech
|
|
Emails to codeaurora.org bounce ("Recipient address rejected:
undeliverable address: No such user here.").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220911112520.203062-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Emails to codeaurora.org bounce ("Recipient address rejected:
undeliverable address: No such user here.").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220911112508.202995-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This adds the CY8CTMA340 Touchscreen to the APQ8060 DragonBoard.
Tested without display by issuing cat /dev/input/input/event3
which produces appropriate noise and interrupts on the dedicated
GPIO line.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220913132846.305716-3-linus.walleij@linaro.org
|
|
GSBI3 can be used to enable an external I2C bus on e.g. the
APQ8060. On the DragonBoard APQ8060 this I2C bus is used to
talk to the Cypress CY8CTMA340 CYTTSP touchscreen.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220913132846.305716-2-linus.walleij@linaro.org
|
|
GSBI1 can be used to enable an external SPI bus on e.g. the
APQ8060. On the DragonBoard APQ8060 this SPI bus is used to
talk to the LCD display.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[bjorn: Moved status properties last]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220913132846.305716-1-linus.walleij@linaro.org
|
|
Add support for overriding electrical signal tuning parameters for
SNPS HS Phy.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662480933-12326-3-git-send-email-quic_kriskura@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add device tree bindings for SNPS phy tuning parameters.
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1662480933-12326-2-git-send-email-quic_kriskura@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the
DMIC power source to match the hardware schematic.
This patch:
1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator.
2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply
setting.
Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220826065621.2255795-1-judyhsiao@chromium.org
|
|
Add dt nodes for sound card support on rev5+ (aka CRD 3.0/3.1) boards,
which is using WCD9385 headset playback, capture, I2S speaker playback
and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-13-git-send-email-quic_srivasam@quicinc.com
|
|
Add dt nodes for sound card support on revision 3, 4
(aka CRD 1.0 and 2.0) and IDP boards, which is using WCD9385 headset
playback, capture, I2S speaker playback and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-12-git-send-email-quic_srivasam@quicinc.com
|
|
Enable lpass cpu node and add pin control and dai-links for audio on
sc7280 based platforms of rev5+ (aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-11-git-send-email-quic_srivasam@quicinc.com
|
|
Enable lpass cpu node and add pin control and dai-links for audio on sc7280
based platforms of revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-10-git-send-email-quic_srivasam@quicinc.com
|
|
Add lpass cpu node for audio on sc7280 based platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-9-git-send-email-quic_srivasam@quicinc.com
|
|
Add max98360a codec node for audio use case on all herobrine boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-8-git-send-email-quic_srivasam@quicinc.com
|
|
Add max98360a codec node for audio use case on revision 3, 4
(aka CRD 1.0 and 2.0) and IDP boards.
Add amp_en node for max98360a codec pin control.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-7-git-send-email-quic_srivasam@quicinc.com
|
|
Add wcd9385 codec node for audio use case on CRD rev5+ (aka CRD 3.0/3.1)
boards. Add tlmm gpio property for switching CTIA/OMTP Headset.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-6-git-send-email-quic_srivasam@quicinc.com
|
|
Add wcd9385 codec node for audio use case on sc7280 based platforms
of revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards.
Add tlmm gpio property for switching CTIA/OMTP Headset.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-5-git-send-email-quic_srivasam@quicinc.com
|
|
Enable rx, tx and va macro codecs and soundwire nodes for
CRD rev5+ (aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-4-git-send-email-quic_srivasam@quicinc.com
|
|
Enable rx, tx and va macro codecs and soundwire nodes on revision 3,
4 (aka CRD 1.0 and 2.0) and IDP boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-3-git-send-email-quic_srivasam@quicinc.com
|
|
SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
external codecs using soundwire masters. Add these nodes for sc7280 based
platforms audio use case.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-2-git-send-email-quic_srivasam@quicinc.com
|
|
Support external mclk to interface external MI2S clocks for SC7280.
Fixes: 4185b27b3bef ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662005846-4838-5-git-send-email-quic_c_skakit@quicinc.com
|
|
Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks
for SC7280. Update reg property min/max items in YAML schema.
Fixes: 4185b27b3bef ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662005846-4838-4-git-send-email-quic_c_skakit@quicinc.com
|
Philip Yang
wangjianli
shaoyunl
Tom St Denis
Rajneesh Bhardwaj
Hamza Mahfooz
Lijo Lazar
Guchun Chen
AngeloGioacchino Del Regno
Mark Brown
Johan Jonker
Colin Foster
David Lin
Gaosheng Cui
Mikhail Rudenko
Krzysztof Kozlowski
Wei Yongjun
Maxime Ripard
Linus Walleij
Krishna Kurapati
Sandeep Maheswaram
Judy Hsiao
Srinivasa Rao Mandadapu
Taniya Das