aboutsummaryrefslogtreecommitdiffstats
path: root/CREDITS (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-26netfilter: xt_hashlimit: unregister proc file before releasing mutexCong Wang1-10/+6
Before releasing the global mutex, we only unlink the hashtable from the hash list, its proc file is still not unregistered at this point. So syzbot could trigger a race condition where a parallel htable_create() could register the same file immediately after the mutex is released. Move htable_remove_proc_entry() back to mutex protection to fix this. And, fold htable_destroy() into htable_put() to make the code slightly easier to understand. Reported-and-tested-by: syzbot+d195fd3b9a364ddd6731@syzkaller.appspotmail.com Fixes: c4a3922d2d20 ("netfilter: xt_hashlimit: reduce hashlimit_mutex scope for htable_put()") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-26ethtool: limit bitset sizeMichal Kubecek2-1/+4
Syzbot reported that ethnl_compact_sanity_checks() can be tricked into reading past the end of ETHTOOL_A_BITSET_VALUE and ETHTOOL_A_BITSET_MASK attributes and even the message by passing a value between (u32)(-31) and (u32)(-1) as ETHTOOL_A_BITSET_SIZE. The problem is that DIV_ROUND_UP(attr_nbits, 32) is 0 for such values so that zero length ETHTOOL_A_BITSET_VALUE will pass the length check but ethnl_bitmap32_not_zero() check would try to access up to 512 MB of attribute "payload". Prevent this overflow byt limiting the bitset size. Technically, compact bitset format would allow bitset sizes up to almost 2^18 (so that the nest size does not exceed U16_MAX) but bitsets used by ethtool are much shorter. S16_MAX, the largest value which can be directly used as an upper limit in policy, should be a reasonable compromise. Fixes: 10b518d4e6dd ("ethtool: netlink bitset handling") Reported-by: syzbot+7fd4ed5b4234ab1fdccd@syzkaller.appspotmail.com Reported-by: syzbot+709b7a64d57978247e44@syzkaller.appspotmail.com Reported-by: syzbot+983cb8fb2d17a7af549d@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: Fix Tx hash bound checkingAmritha Nambiar1-0/+2
Fixes the lower and upper bounds when there are multiple TCs and traffic is on the the same TC on the same device. The lower bound is represented by 'qoffset' and the upper limit for hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue mapping when there are multiple TCs, as the queue indices for upper TCs will be offset by 'qoffset'. v2: Fixed commit description based on comments. Fixes: 1b837d489e06 ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash") Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Revert "KVM: x86: enable -Werror"Christoph Hellwig1-1/+0
This reverts commit ead68df94d248c80fdbae220ae5425eb5af2e753. Using the -Werror flag breaks the build for me due to mostly harmless KASAN or similar warnings: arch/x86/kvm/x86.c: In function ‘kvm_timer_init’: arch/x86/kvm/x86.c:7209:1: error: the frame size of 1112 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Feel free to add a CONFIG_WERROR if you care strong enough, but don't break peoples builds for absolutely no good reason. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-26signal: avoid double atomic counter increments for user accountingLinus Torvalds1-9/+14
When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-27kbuild: add dt_binding_check to PHONY in a correct placeMasahiro Yamada1-1/+2
The dt_binding_check is added to PHONY, but it is invisible when $(dtstree) is empty. So, it is not specified as phony for ARCH=x86 etc. Add it to PHONY outside the ifneq ... endif block. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-27kbuild: add dtbs_check to PHONYMasahiro Yamada1-1/+1
The dtbs_check should be a phony target, but currently it is not specified so. 'make dtbs_check' works even if a file named 'dtbs_check' exists because it depends on another phony target, scripts_dtc, but we should not rely on it. Add dtbs_check to PHONY. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-27kbuild: remove unneeded semicolon at the end of cmd_dtb_checkMasahiro Yamada1-1/+1
This trailing semicolon is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-27kbuild: fix DT binding schema rule to detect command line changesMasahiro Yamada1-2/+2
This if_change_rule is not working properly; it cannot detect any command line change. The reason is because cmd-check in scripts/Kbuild.include compares $(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here. For if_change_rule to work properly, the stem part of cmd_* and rule_* must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must be named rule_dtc. Fixes: 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-27kbuild: remove wrong documentation about mandatory-yMasahiro Yamada1-3/+0
This sentence does not make sense in the section about mandatory-y. This seems to be a copy-paste mistake of commit fcc8487d477a ("uapi: export all headers under uapi directories"). The correct description would be "The convention is to list one mandatory-y per line ...". I just removed it instead of fixing it. If such information is needed, it could be commented in include/asm-generic/Kbuild and include/uapi/asm-generic/Kbuild. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-27kbuild: add comment for V=2 modeRandy Dunlap1-0/+1
Complete the comments for valid values of KBUILD_VERBOSE, specifically for KBUILD_VERBOSE=2. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-26selftests: nft_concat_range: Add test for reported add/flush/add issueStefano Brivio1-4/+39
Add a specific test for the crash reported by Phil Sutter and addressed in the previous patch. The test cases that, in my intention, should have covered these cases, that is, the ones from the 'concurrency' section, don't run these sequences tightly enough and spectacularly failed to catch this. While at it, define a convenient way to add these kind of tests, by adding a "reported issues" test section. It's more convenient, for this particular test, to execute the set setup in its own function. However, future test cases like this one might need to call setup functions, and will typically need no tools other than nft, so allow for this in check_tools(). The original form of the reproducer used here was provided by Phil. Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-26nft_set_pipapo: Actually fetch key data in nft_pipapo_remove()Stefano Brivio1-2/+4
Phil reports that adding elements, flushing and re-adding them right away: nft add table t '{ set s { type ipv4_addr . inet_service; flags interval; }; }' nft add element t s '{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }' nft flush set t s nft add element t s '{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }' triggers, almost reliably, a crash like this one: [ 71.319848] general protection fault, probably for non-canonical address 0x6f6b6e696c2e756e: 0000 [#1] PREEMPT SMP PTI [ 71.321540] CPU: 3 PID: 1201 Comm: kworker/3:2 Not tainted 5.6.0-rc1-00377-g2bb07f4e1d861 #192 [ 71.322746] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014 [ 71.324430] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 71.325387] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables] [ 71.326164] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b [ 71.328423] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282 [ 71.329225] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0 [ 71.330365] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a [ 71.331473] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000 [ 71.332627] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2 [ 71.333615] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0 [ 71.334596] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 71.335780] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.336577] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0 [ 71.337533] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 71.338557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 71.339718] Call Trace: [ 71.340093] nft_pipapo_destroy+0x7a/0x170 [nf_tables_set] [ 71.340973] nft_set_destroy+0x20/0x50 [nf_tables] [ 71.341879] nf_tables_trans_destroy_work+0x246/0x260 [nf_tables] [ 71.342916] process_one_work+0x1d5/0x3c0 [ 71.343601] worker_thread+0x4a/0x3c0 [ 71.344229] kthread+0xfb/0x130 [ 71.344780] ? process_one_work+0x3c0/0x3c0 [ 71.345477] ? kthread_park+0x90/0x90 [ 71.346129] ret_from_fork+0x35/0x40 [ 71.346748] Modules linked in: nf_tables_set nf_tables nfnetlink 8021q [last unloaded: nfnetlink] [ 71.348153] ---[ end trace 2eaa8149ca759bcc ]--- [ 71.349066] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables] [ 71.350016] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b [ 71.350017] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282 [ 71.350019] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0 [ 71.350019] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a [ 71.350020] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000 [ 71.350021] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2 [ 71.350022] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0 [ 71.350025] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 71.350026] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.350027] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0 [ 71.350028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 71.350028] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 71.350030] Kernel panic - not syncing: Fatal exception [ 71.350412] Kernel Offset: disabled [ 71.365922] ---[ end Kernel panic - not syncing: Fatal exception ]--- which is caused by dangling elements that have been deactivated, but never removed. On a flush operation, nft_pipapo_walk() walks through all the elements in the mapping table, which are then deactivated by nft_flush_set(), one by one, and added to the commit list for removal. Element data is then freed. On transaction commit, nft_pipapo_remove() is called, and failed to remove these elements, leading to the stale references in the mapping. The first symptom of this, revealed by KASan, is a one-byte use-after-free in subsequent calls to nft_pipapo_walk(), which is usually not enough to trigger a panic. When stale elements are used more heavily, though, such as double-free via nft_pipapo_destroy() as in Phil's case, the problem becomes more noticeable. The issue comes from that fact that, on a flush operation, nft_pipapo_remove() won't get the actual key data via elem->key, elements to be deleted upon commit won't be found by the lookup via pipapo_get(), and removal will be skipped. Key data should be fetched via nft_set_ext_key(), instead. Reported-by: Phil Sutter <phil@nwl.cc> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-25bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issueMasami Hiramatsu2-2/+1
Since commit d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") also changed the CONFIG_BOOTTIME_TRACING to select CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu, it introduced wrong dependencies with BLK_DEV_INITRD as below. WARNING: unmet direct dependencies detected for BOOT_CONFIG Depends on [n]: BLK_DEV_INITRD [=n] Selected by [y]: - BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y] This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so that both boot-time tracing and boot configuration off but those appear on the menu list. Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2 Fixes: d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") Reported-by: Randy Dunlap <rdunlap@infradead.org> Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-25icmp: allow icmpv6_ndo_send to work with CONFIG_IPV6=nJason A. Donenfeld1-6/+10
The icmpv6_send function has long had a static inline implementation with an empty body for CONFIG_IPV6=n, so that code calling it doesn't need to be ifdef'd. The new icmpv6_ndo_send function, which is intended for drivers as a drop-in replacement with an identical function signature, should follow the same pattern. Without this patch, drivers that used to work with CONFIG_IPV6=n now result in a linker error. Cc: Chen Zhou <chenzhou10@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25selftests: nft_concat_range: Move option for 'list ruleset' before commandStefano Brivio1-6/+6
Before nftables commit fb9cea50e8b3 ("main: enforce options before commands"), 'nft list ruleset -a' happened to work, but it's wrong and won't work anymore. Replace it by 'nft -a list ruleset'. Reported-by: Chen Yi <yiche@redhat.com> Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-25docs: Fix empty parallelism argumentKees Cook1-1/+1
When there was no parallelism (no top-level -j arg and a pre-1.7 sphinx-build), the argument passed would be empty ("") instead of just being missing, which would (understandably) badly confuse sphinx-build. Fix this by removing the quotes. Reported-by: Rafael J. Wysocki <rafael@kernel.org> Fixes: 51e46c7a4007 ("docs, parallelism: Rearrange how jobserver reservations are made") Cc: stable@vger.kernel.org # v5.5 only Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-02-25docs: remove MPX from the x86 tocStephen Kitt1-1/+0
MPX was removed in commit 45fc24e89b7c ("x86/mpx: remove MPX from arch/x86"), this removes the corresponding entry in the x86 toc. This was suggested by a Sphinx warning. Signed-off-by: Stephen Kitt <steve@sk2.org> Fixes: 45fc24e89b7cc ("x86/mpx: remove MPX from arch/x86") Acked-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-02-24MAINTAINERS: Hand MIPS over to ThomasPaul Burton2-4/+7
My time with MIPS the company has reached its end, and so at best I'll have little time spend on maintaining arch/mips/. Ralf last authored a patch over 2 years ago, the last time he committed one is even further back & activity was sporadic for a while before that. The reality is that he isn't active. Having a new maintainer with time to do things properly will be beneficial all round. Thomas Bogendoerfer has been involved in MIPS development for a long time & has offered to step up as maintainer, so add Thomas and remove myself & Ralf from the MIPS entry. Ralf already has an entry in CREDITS to honor his contributions, so this just adds one for me. Signed-off-by: Paul Burton <paulburton@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org
2020-02-24audit: always check the netlink payload length in audit_receive_msg()Paul Moore1-19/+21
This patch ensures that we always check the netlink payload length in audit_receive_msg() before we take any action on the payload itself. Cc: stable@vger.kernel.org Reported-by: syzbot+399c44bf1f43b8747403@syzkaller.appspotmail.com Reported-by: syzbot+e4b12d8d202701f08b6d@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-02-24riscv: adjust the indentZong Li1-11/+15
Adjust the indent to match Linux coding style. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24riscv: allocate a complete page size for each page tableZong Li1-11/+16
Each page table should be created by allocating a complete page size for it. Otherwise, the content of the page table would be corrupted somewhere through memory allocation which allocates the memory at the middle of the page table for other use. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24floppy: check FDC index for errors before assigning itLinus Torvalds1-2/+5
Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer <jordy@simplyhacker.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24net: bridge: fix stale eth hdr pointer in br_dev_xmitNikolay Aleksandrov1-4/+2
In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but if the packet has the vlan header inside (e.g. bridge with disabled tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag() to extract the vid before filtering which in turn calls pskb_may_pull() and we may end up with a stale eth pointer. Moreover the cached eth header pointer will generally be wrong after that operation. Remove the eth header caching and just use eth_hdr() directly, the compiler does the right thing and calculates it only once so we don't lose anything. Fixes: 057658cb33fb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ll_temac: Handle DMA halt condition caused by buffer underrunEsben Haabendal2-5/+56
The SDMA engine used by TEMAC halts operation when it has finished processing of the last buffer descriptor in the buffer ring. Unfortunately, no interrupt event is generated when this happens, so we need to setup another mechanism to make sure DMA operation is restarted when enough buffers have been added to the ring. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ll_temac: Fix RX buffer descriptor handling on GFP_ATOMIC pressureEsben Haabendal2-31/+82
Failures caused by GFP_ATOMIC memory pressure have been observed, and due to the missing error handling, results in kernel crash such as [1876998.350133] kernel BUG at mm/slub.c:3952! [1876998.350141] invalid opcode: 0000 [#1] PREEMPT SMP PTI [1876998.350147] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.3.0-scnxt #1 [1876998.350150] Hardware name: N/A N/A/COMe-bIP2, BIOS CCR2R920 03/01/2017 [1876998.350160] RIP: 0010:kfree+0x1ca/0x220 [1876998.350164] Code: 85 db 74 49 48 8b 95 68 01 00 00 48 31 c2 48 89 10 e9 d7 fe ff ff 49 8b 04 24 a9 00 00 01 00 75 0b 49 8b 44 24 08 a8 01 75 02 <0f> 0b 49 8b 04 24 31 f6 a9 00 00 01 00 74 06 41 0f b6 74 24 5b [1876998.350172] RSP: 0018:ffffc900000f0df0 EFLAGS: 00010246 [1876998.350177] RAX: ffffea00027f0708 RBX: ffff888008d78000 RCX: 0000000000391372 [1876998.350181] RDX: 0000000000000000 RSI: ffffe8ffffd01400 RDI: ffff888008d78000 [1876998.350185] RBP: ffff8881185a5d00 R08: ffffc90000087dd8 R09: 000000000000280a [1876998.350189] R10: 0000000000000002 R11: 0000000000000000 R12: ffffea0000235e00 [1876998.350193] R13: ffff8881185438a0 R14: 0000000000000000 R15: ffff888118543870 [1876998.350198] FS: 0000000000000000(0000) GS:ffff88811f300000(0000) knlGS:0000000000000000 [1876998.350203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 s#1 Part1 [1876998.350206] CR2: 00007f8dac7b09f0 CR3: 000000011e20a006 CR4: 00000000001606e0 [1876998.350210] Call Trace: [1876998.350215] <IRQ> [1876998.350224] ? __netif_receive_skb_core+0x70a/0x920 [1876998.350229] kfree_skb+0x32/0xb0 [1876998.350234] __netif_receive_skb_core+0x70a/0x920 [1876998.350240] __netif_receive_skb_one_core+0x36/0x80 [1876998.350245] process_backlog+0x8b/0x150 [1876998.350250] net_rx_action+0xf7/0x340 [1876998.350255] __do_softirq+0x10f/0x353 [1876998.350262] irq_exit+0xb2/0xc0 [1876998.350265] do_IRQ+0x77/0xd0 [1876998.350271] common_interrupt+0xf/0xf [1876998.350274] </IRQ> In order to handle such failures more graceful, this change splits the receive loop into one for consuming the received buffers, and one for allocating new buffers. When GFP_ATOMIC allocations fail, the receive will continue with the buffers that is still there, and with the expectation that the allocations will succeed in a later call to receive. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ll_temac: Add more error handling of dma_map_single() callsEsben Haabendal1-2/+24
This adds error handling to the remaining dma_map_single() calls, so that behavior is well defined if/when we run out of DMA memory. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ll_temac: Fix race condition causing TX hangEsben Haabendal1-3/+16
It is possible that the interrupt handler fires and frees up space in the TX ring in between checking for sufficient TX ring space and stopping the TX queue in temac_start_xmit. If this happens, the queue wake from the interrupt handler will occur before the queue is stopped, causing a lost wakeup and the adapter's transmit hanging. To avoid this, after stopping the queue, check again whether there is sufficient space in the TX ring. If so, wake up the queue again. This is a port of the similar fix in axienet driver, commit 7de44285c1f6 ("net: axienet: Fix race condition causing TX hang"). Fixes: 23ecc4bde21f ("net: ll_temac: fix checksum offload logic") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24KVM: s390: rstify new ioctls in api.rstChristian Borntraeger1-15/+18
We also need to rstify the new ioctls that we added in parallel to the rstification of the kvm docs. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-24mac80211: rx: avoid RCU list traversal under mutexMadhuparna Bhowmik1-1/+1
local->sta_mtx is held in __ieee80211_check_fast_rx_iface(). No need to use list_for_each_entry_rcu() as it also requires a cond argument to avoid false lockdep warnings when not used in RCU read-side section (with CONFIG_PROVE_RCU_LIST). Therefore use list_for_each_entry(); Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200223143302.15390-1-madhuparnabhowmik10@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-24nl80211: explicitly include if_vlan.hJohannes Berg1-0/+1
We use that here, and do seem to get it through some recursive include, but better include it explicitly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200224093814.1b9c258fec67.I45ac150d4e11c72eb263abec9f1f0c7add9bef2b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-23net: core: devlink.c: Hold devlink->lock from the beginning of devlink_dpipe_table_register()Madhuparna Bhowmik1-7/+14
devlink_dpipe_table_find() should be called under either rcu_read_lock() or devlink->lock. devlink_dpipe_table_register() calls devlink_dpipe_table_find() without holding the lock and acquires it later. Therefore hold the devlink->lock from the beginning of devlink_dpipe_table_register(). Suggested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23net: phy: Avoid multiple suspendsFlorian Fainelli1-2/+3
It is currently possible for a PHY device to be suspended as part of a network device driver's suspend call while it is still being attached to that net_device, either via phy_suspend() or implicitly via phy_stop(). Later on, when the MDIO bus controller get suspended, we would attempt to suspend again the PHY because it is still attached to a network device. This is both a waste of time and creates an opportunity for improper clock/power management bugs to creep in. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23net: ks8851-ml: Fix IRQ handling and lockingMarek Vasut1-6/+8
The KS8851 requires that packet RX and TX are mutually exclusive. Currently, the driver hopes to achieve this by disabling interrupt from the card by writing the card registers and by disabling the interrupt on the interrupt controller. This however is racy on SMP. Replace this approach by expanding the spinlock used around the ks_start_xmit() TX path to ks_irq() RX path to assure true mutual exclusion and remove the interrupt enabling/disabling, which is now not needed anymore. Furthermore, disable interrupts also in ks_net_stop(), which was missing before. Note that a massive improvement here would be to re-use the KS8851 driver approach, which is to move the TX path into a worker thread, interrupt handling to threaded interrupt, and synchronize everything with mutexes, but that would be a much bigger rework, for a separate patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23docs: networking: phy: Rephrase paragraph for clarityJonathan Neuschäfer1-2/+3
Let's make it a little easier to read. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23tcp: fix TFO SYNACK undo to avoid double-timestamp-undoNeal Cardwell1-1/+5
In a rare corner case the new logic for undo of SYNACK RTO could result in triggering the warning in tcp_fastretrans_alert() that says: WARN_ON(tp->retrans_out != 0); The warning looked like: WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270 The sequence that tickles this bug is: - Fast Open server receives TFO SYN with data, sends SYNACK - (client receives SYNACK and sends ACK, but ACK is lost) - server app sends some data packets - (N of the first data packets are lost) - server receives client ACK that has a TS ECR matching first SYNACK, and also SACKs suggesting the first N data packets were lost - server performs TS undo of SYNACK RTO, then immediately enters recovery - buggy behavior then performed a *second* undo that caused the connection to be in CA_Open with retrans_out != 0 Basically, the incoming ACK packet with SACK blocks causes us to first undo the cwnd reduction from the SYNACK RTO, but then immediately enters fast recovery, which then makes us eligible for undo again. And then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo using a "mash-up" of state from two different loss recovery phases: it uses the timestamp info from the ACK of the original SYNACK, and the undo_marker from the fast recovery. This fix refines the logic to only invoke the tcp_try_undo_loss() inside tcp_rcv_synrecv_state_fastopen() if the connection is still in CA_Loss. If peer SACKs triggered fast recovery, then tcp_rcv_synrecv_state_fastopen() can't safely undo. Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23hv_netvsc: Fix unwanted wakeup in netvsc_attach()Haiyang Zhang2-1/+4
When netvsc_attach() is called by operations like changing MTU, etc., an extra wakeup may happen while netvsc_attach() calling rndis_filter_device_add() which sends rndis messages when queue is stopped in netvsc_detach(). The completion message will wake up queue 0. We can reproduce the issue by changing MTU etc., then the wake_queue counter from "ethtool -S" will increase beyond stop_queue counter: stop_queue: 0 wake_queue: 1 The issue causes queue wake up, and counter increment, no other ill effects in current code. So we didn't see any network problem for now. To fix this, initialize tx_disable to true, and set it to false when the NIC is ready to be attached or registered. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23Linux 5.6-rc3Linus Torvalds1-1/+1
2020-02-23net: usb: qmi_wwan: restore mtu min/max values after raw_ip switchDaniele Palmas1-0/+3
usbnet creates network interfaces with min_mtu = 0 and max_mtu = ETH_MAX_MTU. These values are not modified by qmi_wwan when the network interface is created initially, allowing, for example, to set mtu greater than 1500. When a raw_ip switch is done (raw_ip set to 'Y', then set to 'N') the mtu values for the network interface are set through ether_setup, with min_mtu = ETH_MIN_MTU and max_mtu = ETH_DATA_LEN, not allowing anymore to set mtu greater than 1500 (error: mtu greater than device maximum). The patch restores the original min/max mtu values set by usbnet after a raw_ip switch. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23KVM: nVMX: Check IO instruction VM-exit conditionsOliver Upton2-7/+52
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution controls when checking instruction interception. If the 'use IO bitmaps' VM-execution control is 1, check the instruction access against the IO bitmaps to determine if the instruction causes a VM-exit. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Refactor IO bitmap checks into helper functionOliver Upton2-14/+27
Checks against the IO bitmap are useful for both instruction emulation and VM-exit reflection. Refactor the IO bitmap checks into a helper function. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Don't emulate instructions in guest modePaolo Bonzini1-1/+1
vmx_check_intercept is not yet fully implemented. To avoid emulating instructions disallowed by the L1 hypervisor, refuse to emulate instructions by default. Cc: stable@vger.kernel.org [Made commit, added commit msg - Oliver] Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Emulate MTF when performing instruction emulationOliver Upton8-2/+83
Since commit 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap flag processor-based execution control for its L2 guest. KVM simply forwards any MTF VM-exits to the L1 guest, which works for normal instruction execution. However, when KVM needs to emulate an instruction on the behalf of an L2 guest, the monitor trap flag is not emulated. Add the necessary logic to kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon instruction emulation for L2. Fixes: 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG") Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: fix error handling in svm_hardware_setupLi RongQing1-21/+20
rename svm_hardware_unsetup as svm_hardware_teardown, move it before svm_hardware_setup, and call it to free all memory if fail to setup in svm_hardware_setup, otherwise memory will be leaked remove __exit attribute for it since it is called in __init function Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-22net: genetlink: return the error code when attribute parsing fails.Paolo Abeni1-2/+3
Currently if attribute parsing fails and the genl family does not support parallel operation, the error code returned by __nlmsg_parse() is discarded by genl_family_rcv_msg_attrs_parse(). Be sure to report the error for all genl families. Fixes: c10e6cf85e7d ("net: genetlink: push attrbuf allocation and parsing to a separate function") Fixes: ab5b526da048 ("net: genetlink: always allocate separate attrs for dumpit ops") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-22ipv4: ensure rcu_read_lock() in cipso_v4_error()Matteo Croce1-1/+6
Similarly to commit c543cb4a5f07 ("ipv4: ensure rcu_read_lock() in ipv4_link_failure()"), __ip_options_compile() must be called under rcu protection. Fixes: 3da1ed7ac398 ("net: avoid use IPCB in cipso_v4_error") Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-22vhost: Check docket sk_family instead of call getnameEugenio Pérez1-9/+1
Doing so, we save one call to get data we already have in the struct. Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro). Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven1-1/+1
The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-22audit: fix error handling in audit_data_to_entry()Paul Moore1-32/+39
Commit 219ca39427bf ("audit: use union for audit_field values since they are mutually exclusive") combined a number of separate fields in the audit_field struct into a single union. Generally this worked just fine because they are generally mutually exclusive. Unfortunately in audit_data_to_entry() the overlap can be a problem when a specific error case is triggered that causes the error path code to attempt to cleanup an audit_field struct and the cleanup involves attempting to free a stored LSM string (the lsm_str field). Currently the code always has a non-NULL value in the audit_field.lsm_str field as the top of the for-loop transfers a value into audit_field.val (both .lsm_str and .val are part of the same union); if audit_data_to_entry() fails and the audit_field struct is specified to contain a LSM string, but the audit_field.lsm_str has not yet been properly set, the error handling code will attempt to free the bogus audit_field.lsm_str value that was set with audit_field.val at the top of the for-loop. This patch corrects this by ensuring that the audit_field.val is only set when needed (it is cleared when the audit_field struct is allocated with kcalloc()). It also corrects a few other issues to ensure that in case of error the proper error code is returned. Cc: stable@vger.kernel.org Fixes: 219ca39427bf ("audit: use union for audit_field values since they are mutually exclusive") Reported-by: syzbot+1f4d90ead370d72e450b@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-02-22io_uring: fix __io_iopoll_check deadlock in io_sq_threadXiaoguang Wang1-18/+9
Since commit a3a0e43fd770 ("io_uring: don't enter poll loop if we have CQEs pending"), if we already events pending, we won't enter poll loop. In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has been terminated and don't reap pending events which are already in cq ring, and there are some reqs in poll_list, io_sq_thread will enter __io_iopoll_check(), and find pending events, then return, this loop will never have a chance to exit. I have seen this issue in fio stress tests, to fix this issue, let io_sq_thread call io_iopoll_getevents() with argument 'min' being zero, and remove __io_iopoll_check(). Fixes: a3a0e43fd770 ("io_uring: don't enter poll loop if we have CQEs pending") Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.