| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are three places where we access uninitialized memmaps, namely:
- /proc/kpagecount
- /proc/kpageflags
- /proc/kpagecgroup
We have initialized memmaps either when the section is online or when the
page was initialized to the ZONE_DEVICE. Uninitialized memmaps contain
garbage and in the worst case trigger kernel BUGs, especially with
CONFIG_PAGE_POISONING.
For example, not onlining a DIMM during boot and calling /proc/kpagecount
with CONFIG_PAGE_POISONING:
:/# cat /proc/kpagecount > tmp.test
BUG: unable to handle page fault for address: fffffffffffffffe
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114616067 P4D 114616067 PUD 114618067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
RIP: 0010:kpagecount_read+0xce/0x1e0
Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480
RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202
RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000
RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08
FS: 00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0
Call Trace:
proc_reg_read+0x3c/0x60
vfs_read+0xc5/0x180
ksys_read+0x68/0xe0
do_syscall_64+0x5c/0xa0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
For now, let's drop support for ZONE_DEVICE from the three pseudo files
in order to fix this. To distinguish offline memory (with garbage
memmap) from ZONE_DEVICE memory with properly initialized memmaps, we
would have to check get_dev_pagemap() and pfn_zone_device_reserved()
right now. The usage of both (especially, special casing devmem) is
frowned upon and needs to be reworked.
The fundamental issue we have is:
if (pfn_to_online_page(pfn)) {
/* memmap initialized */
} else if (pfn_valid(pfn)) {
/*
* ???
* a) offline memory. memmap garbage.
* b) devmem: memmap initialized to ZONE_DEVICE.
* c) devmem: reserved for driver. memmap garbage.
* (d) devmem: memmap currently initializing - garbage)
*/
}
We'll leave the pfn_zone_device_reserved() check in stable_page_flags()
in place as that function is also used from memory failure. We now no
longer dump information about pages that are not in use anymore -
offline.
Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Uninitialized memmaps contain garbage and in the worst case trigger kernel
BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched.
Right now, when trying to soft-offline a PFN that resides on a memory
block that was never onlined, one gets a misleading error with
CONFIG_PAGE_POISONING:
:/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page
[ 23.097167] soft offline: 0x150000 page already poisoned
But the actual result depends on the garbage in the memmap.
soft_offline_page() can only work with online pages, it returns -EIO in
case of ZONE_DEVICE. Make sure to only forward pages that are online
(iow, managed by the buddy) and, therefore, have an initialized memmap.
Add a check against pfn_to_online_page() and similarly return -EIO.
Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was always meant to be a temporary thing, just for testing and to
see if it actually ever triggered.
The only thing that reported it was syzbot doing disk image fuzzing, and
then that warning is expected. So let's just remove it before -rc4,
because the extra sanity testing should probably go to -stable, but we
don't want the warning to do so.
Reported-by: syzbot+3031f712c7ad5dd4d926@syzkaller.appspotmail.com
Fixes: 8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In mlx5_fw_fatal_reporter_dump if mlx5_crdump_collect fails the
allocated memory for cr_data must be released otherwise there will be
memory leak. To fix this, this commit changes the return instruction
into goto error handling.
Fixes: 9b1f29823605 ("net/mlx5: Add support for FW fatal reporter dump")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In mlx5_fpga_conn_create_cq if mlx5_vector2eqn fails the allocated
memory should be released.
Fixes: 537a50574175 ("net/mlx5: FPGA, Add high-speed connection routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The completion queue consumer index increments upon a call to
mlx5_cqwq_pop().
When dumping an error CQE, the index is already incremented.
Decrease one for the print command.
Fixes: 16cc14d81733 ("net/mlx5e: Dump xmit error completions")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Once the kTLS TX resync function is called, it used to return
a binary value, for success or failure.
However, in case the TLS SKB is a retransmission of the connection
handshake, it initiates the resync flow (as the tcp seq check holds),
while regular packet handle is expected.
In this patch, we identify this case and skip the resync operation
accordingly.
Counters:
- Add a counter (tls_skip_no_sync_data) to monitor this.
- Bump the dump counters up as they are used more frequently.
- Add a missing counter descriptor declaration for tls_resync_bytes
in sq_stats_desc.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Do not assume the crypto info is accessible during the
connection lifetime. Save a copy of it in the private
TX context.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Cipher type is checked upon connection addition.
No need to recheck it per every TX resync invocation.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
HW expects the data size in DUMP WQEs to be up to MTU.
Make sure they are in range.
We elevate the frag page refcount by 'n-1', in addition to the
one obtained in tx_sync_info_get(), having an overall of 'n'
references. We bulk increments by using a single page_ref_add()
command, to optimize perfermance.
The refcounts are released one by one, by the corresponding completions.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Before posting the context params WQEs, make sure there is enough
contiguous room for them, and fill frag edge if needed.
When posting only a nop, no need for room check, as it needs a single
WQEBB, meaning no contiguity issue.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
All references for frag pages that are obtained in tx_sync_info_get()
should be released.
Release usually occurs in the corresponding CQE of the WQE.
In error flows, not all fragments have a WQE posted for them, hence
no matching CQE will be generated.
For these pages, release the reference in the error flow.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Access the record fragments only under the TLS ctx lock.
In the resync flow, save a copy of them to be used when
preparing and posting the required DUMP WQEs.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In TX resync flow where DUMP WQEs are posted, keep a pointer to
the fragment page to unref it upon completion, instead of saving
the whole fragment.
In addition, move it the end of the arguments list in tx_fill_wi().
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
No Eth segment, so no dynamic inline headers.
The size of a Dump WQE is fixed, use constants and remove
unnecessary checks.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
A call to kTLS completion handler was missing in the TXQSQ release
flow. Add it.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Not all fields of WQE info are being written in the function,
having some leftovers from previous rounds.
Zero-memset it upon update.
Particularly, not nullifying the wi->resync_dump_frag field
will cause double free of the kTLS DUMPed frags.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Cited patch removed the assumption only in datapath.
Here we remove it also form control/cleanup flow.
Fixes: 9ab0233728ca ("net/mlx5e: Tx, Don't implicitly assume SKB-less wqe has one WQEBB")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
As soon as the netdev is registers, the kernel can start using the
interface. If the driver connects the MAC to the PHY after the netdev
is registered, there is a race condition where the interface can be
opened without having the PHY connected.
Change the order to close this race condition.
Fixes: 92571a1aae40 ("lan78xx: Connect phy early")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the remote peer doesn't respect the credit information
(buf_alloc, fwd_cnt), sending more data than it can send,
we should drop the packets to prevent a malicious peer
from using all of our memory.
This is patch follows the VIRTIO spec: "VIRTIO_VSOCK_OP_RW data
packets MUST only be transmitted when the peer has sufficient
free buffer space for the payload"
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the user application set a new buffer size value, we should
update the remote peer about this change, since it uses this
information to calculate the credit available.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
devlink maintains packets and bytes statistics for each trap. Since
eth_type_trans() was called to set the skb's protocol, the data pointer
no longer points to the start of the packet and the bytes accounting is
off by 14 bytes.
Fix this by pushing the skb's data pointer to the start of the packet.
Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thomas found that some forwarded packets would be stuck
in FQ packet scheduler because their skb->tstamp contained
timestamps far in the future.
We thought we addressed this point in commit 8203e2d844d3
("net: clear skb->tstamp in forwarding paths") but there
is still an issue when/if a packet needs to be fragmented.
In order to meet EDT requirements, we have to make sure all
fragments get the original skb->tstamp.
Note that this original skb->tstamp should be zero in
forwarding path, but might have a non zero value in
output path if user decided so.
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thomas Bartschies <Thomas.Bartschies@cvk.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The EPHY integrated into the 40nm Set-Top Box devices can falsely
detect energy when connected to a disabled peer interface. When the
peer interface is enabled the EPHY will detect and report the link
as active, but on occasion may get into a state where it is not
able to exchange data with the connected GENET MAC. This issue has
not been observed when the link parameters are auto-negotiated;
however, it has been observed with a manually configured link.
It has been empirically determined that issuing a soft reset to the
EPHY when energy is detected prevents it from getting into this bad
state.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turns out that the "Workaround for putting the PHY in IDDQ mode"
used by the internal EPHYs on 40nm Set-Top Box chips when powering
down puts the interface to the GENET MAC in a state that can cause
subsequent MAC resets to be incomplete.
Rather than restore the forced soft reset when powering up internal
PHYs, this commit moves the invocation of phy_init_hw earlier in
the MAC initialization sequence to just before the MAC reset in the
open and resume functions. This allows the interface to be stable
and allows the MAC resets to be successful.
The bcmgenet_mii_probe() function is split in two to accommodate
this. The new function bcmgenet_mii_connect() handles the first
half of the functionality before the MAC initialization, and the
bcmgenet_mii_config() function is extended to provide the remaining
PHY configuration following the MAC initialization.
Fixes: 484bfa1507bf ("Revert "net: bcmgenet: Software reset EPHY after power on"")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The internal 40nm EPHYs use a "Workaround for putting the PHY in
IDDQ mode." These PHYs require a soft reset to restore functionality
after they are powered back up.
This commit defines the soft_reset function to use genphy_soft_reset
during phy_init_hw to accommodate this.
Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When commit 28b2e0d2cd13 ("net: phy: remove parameter new_link from
phy_mac_interrupt()") removed the new_link parameter it set the
phydev->link state from the MAC before invoking phy_mac_interrupt().
However, once commit 88d6272acaaa ("net: phy: avoid unneeded MDIO
reads in genphy_read_status") was added this initialization prevents
the proper determination of the connection parameters by the function
genphy_read_status().
This commit removes that initialization to restore the proper
functionality.
Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The increase_address_space() function has to check the PM_LEVEL_SIZE()
condition again under the domain->lock to avoid a false trigger of the
WARN_ON_ONCE() and to avoid that the address space is increase more
often than necessary.
Reported-by: Qian Cai <cai@lca.pw>
Fixes: 754265bcab78 ("iommu/amd: Fix race in increase_address_space()")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In the current code, the nvme is using a fixed 4k PRP entry size,
but if the kernel use a page size which is more than 4k, we should
consider the situation that the bv_offset may be larger than the
dev->ctrl.page_size. Otherwise we may miss setting the prp2 and then
cause the command can't be executed correctly.
Fixes: dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN
warning:
[ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8
[ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1
[ 20.884826]
[ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289
[ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[ 20.903505] Call trace:
[ 20.905942] dump_backtrace+0x0/0x200
[ 20.909593] show_stack+0x14/0x20
[ 20.912899] dump_stack+0xd4/0x130
[ 20.916291] print_address_description.isra.9+0x6c/0x3b8
[ 20.921592] __kasan_report+0x12c/0x23c
[ 20.925417] kasan_report+0xc/0x18
[ 20.928808] __asan_load4+0x94/0xb8
[ 20.932286] pcc_data_alloc+0x40/0xb8
[ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08
[ 20.940717] __acpi_processor_start+0x48/0xb0
[ 20.945062] acpi_processor_start+0x40/0x60
[ 20.949235] really_probe+0x118/0x548
[ 20.952887] driver_probe_device+0x7c/0x148
[ 20.957059] device_driver_attach+0x94/0xa0
[ 20.961231] __driver_attach+0xa4/0x110
[ 20.965055] bus_for_each_dev+0xe8/0x158
[ 20.968966] driver_attach+0x30/0x40
[ 20.972531] bus_add_driver+0x234/0x2f0
[ 20.976356] driver_register+0xbc/0x1d0
[ 20.980182] acpi_processor_driver_init+0x40/0xe4
[ 20.984875] do_one_initcall+0xb4/0x254
[ 20.988700] kernel_init_freeable+0x24c/0x2f8
[ 20.993047] kernel_init+0x10/0x118
[ 20.996524] ret_from_fork+0x10/0x18
[ 21.000087]
[ 21.001567] Allocated by task 1:
[ 21.004785] save_stack+0x28/0xc8
[ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8
[ 21.012435] kasan_kmalloc+0xc/0x18
[ 21.015913] pcc_data_alloc+0x94/0xb8
[ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08
[ 21.024343] __acpi_processor_start+0x48/0xb0
[ 21.028689] acpi_processor_start+0x40/0x60
[ 21.032860] really_probe+0x118/0x548
[ 21.036512] driver_probe_device+0x7c/0x148
[ 21.040684] device_driver_attach+0x94/0xa0
[ 21.044855] __driver_attach+0xa4/0x110
[ 21.048680] bus_for_each_dev+0xe8/0x158
[ 21.052591] driver_attach+0x30/0x40
[ 21.056155] bus_add_driver+0x234/0x2f0
[ 21.059980] driver_register+0xbc/0x1d0
[ 21.063805] acpi_processor_driver_init+0x40/0xe4
[ 21.068497] do_one_initcall+0xb4/0x254
[ 21.072322] kernel_init_freeable+0x24c/0x2f8
[ 21.076667] kernel_init+0x10/0x118
[ 21.080144] ret_from_fork+0x10/0x18
[ 21.083707]
[ 21.085186] Freed by task 1:
[ 21.088056] save_stack+0x28/0xc8
[ 21.091360] __kasan_slab_free+0x118/0x180
[ 21.095445] kasan_slab_free+0x10/0x18
[ 21.099183] kfree+0x80/0x268
[ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8
[ 21.106832] acpi_processor_stop+0x70/0x80
[ 21.110917] really_probe+0x174/0x548
[ 21.114568] driver_probe_device+0x7c/0x148
[ 21.118740] device_driver_attach+0x94/0xa0
[ 21.122912] __driver_attach+0xa4/0x110
[ 21.126736] bus_for_each_dev+0xe8/0x158
[ 21.130648] driver_attach+0x30/0x40
[ 21.134212] bus_add_driver+0x234/0x2f0
[ 21.0x10/0x18
[ 21.161764]
[ 21.163244] The buggy address belongs to the object at ffff00236cdeb600
[ 21.163244] which belongs to the cache kmalloc-256 of size 256
[ 21.175750] The buggy address is located 132 bytes inside of
[ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700)
[ 21.187473] The buggy address belongs to the page:
[ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0
[ 21.202331] flags: 0x1ffff00000010200(slab|head)
[ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00
[ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000
[ 21.222400] page dumped because: kasan: bad access detected
[ 21.227959]
[ 21.229438] Memory state around the buggy address:
[ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 21.255845] ^
[ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 21.273480] ==================================================================
It seems that global pcc_data[pcc_ss_id] can be freed in
acpi_cppc_processor_exit(), but we may later reference this value, so
NULLify it when freed.
Also remove the useless setting of data "pcc_channel_acquired", which
we're about to free.
Fixes: 85b1407bf6d2 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs")
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Update maintainers for MediaTek ethernet driver with Mark Lee.
He is familiar with MediaTek mt762x series ethernet devices and
will keep following maintenance from the vendor side.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jesse and Ido reported the following race condition:
<CPU A, t0> - Received packet A is forwarded and cached dst entry is
taken from the nexthop ('nhc->nhc_rth_input'). Calls skb_dst_set()
<t1> - Given Jesse has busy routers ("ingesting full BGP routing tables
from multiple ISPs"), route is added / deleted and rt_cache_flush() is
called
<CPU B, t2> - Received packet B tries to use the same cached dst entry
from t0, but rt_cache_valid() is no longer true and it is replaced in
rt_cache_route() by the newer one. This calls dst_dev_put() on the
original dst entry which assigns the blackhole netdev to 'dst->dev'
<CPU A, t3> - dst_input(skb) is called on packet A and it is dropped due
to 'dst->dev' being the blackhole netdev
There are 2 issues in the v4 routing code:
1. A per-netns counter is used to do the validation of the route. That
means whenever a route is changed in the netns, users of all routes in
the netns needs to redo lookup. v6 has an implementation of only
updating fn_sernum for routes that are affected.
2. When rt_cache_valid() returns false, rt_cache_route() is called to
throw away the current cache, and create a new one. This seems
unnecessary because as long as this route does not change, the route
cache does not need to be recreated.
To fully solve the above 2 issues, it probably needs quite some code
changes and requires careful testing, and does not suite for net branch.
So this patch only tries to add the deleted cached rt into the uncached
list, so user could still be able to use it to receive packets until
it's done.
Fixes: 95c47f9cf5e0 ("ipv4: call dst_dev_put() properly")
Signed-off-by: Wei Wang <weiwan@google.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Reported-by: Jesse Hathaway <jesse@mbuki-mvuki.org>
Tested-by: Jesse Hathaway <jesse@mbuki-mvuki.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
...instead of -EINVAL. An issue was found with older kernel versions
while unplugging a NFS client with pending RPCs, and the wrong error
code here prevented it from recovering once link is back up with a
configured address.
Incidentally, this is not an issue anymore since commit 4f8943f80883
("SUNRPC: Replace direct task wakeups from softirq context"), included
in 5.2-rc7, had the effect of decoupling the forwarding of this error
by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin
Coddington.
To the best of my knowledge, this isn't currently causing any further
issue, but the error code doesn't look appropriate anyway, and we
might hit this in other paths as well.
In detail, as analysed by Gonzalo Siero, once the route is deleted
because the interface is down, and can't be resolved and we return
-EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(),
as the socket error seen by tcp_write_err(), called by
tcp_retransmit_timer().
In turn, tcp_write_err() indirectly calls xs_error_report(), which
wakes up the RPC pending tasks with a status of -EINVAL. This is then
seen by call_status() in the SUN RPC implementation, which aborts the
RPC call calling rpc_exit(), instead of handling this as a
potentially temporary condition, i.e. as a timeout.
Return -EINVAL only if the input parameters passed to
ip_route_output_key_hash_rcu() are actually invalid (this is the case
if the specified source address is multicast, limited broadcast or
all zeroes), but return -ENETUNREACH in all cases where, at the given
moment, the given source address doesn't allow resolving the route.
While at it, drop the initialisation of err to -ENETUNREACH, which
was added to __ip_route_output_key() back then by commit
0315e3827048 ("net: Fix behaviour of unreachable, blackhole and
prohibit routes"), but actually had no effect, as it was, and is,
overwritten by the fib_lookup() return code assignment, and anyway
ignored in all other branches, including the if (fl4->saddr) one:
I find this rather confusing, as it would look like -ENETUNREACH is
the "default" error, while that statement has no effect.
Also note that after commit fc75fc8339e7 ("ipv4: dont create routes
on down devices"), we would get -ENETUNREACH if the device is down,
but -EINVAL if the source address is specified and we can't resolve
the route, and this appears to be rather inconsistent.
Reported-by: Stefan Walter <walteste@inf.ethz.ch>
Analysed-by: Benjamin Coddington <bcodding@redhat.com>
Analysed-by: Gonzalo Siero <gsierohu@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches.
Update the PHY ID and name to reflect that, as this family of switches
is commonly refered to as KSZ87xx
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the
same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs
in the micrel PHY driver, it is used even with the KSZ87xx switch. This
is wrong, since the KSZ8051 configures registers of the PHY which are
not present on the simplified KSZ87xx switch PHYs and misconfigures
other registers of the KSZ87xx switch PHYs.
Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the
KSZ87xx switch by checking the Basic Status register Bit 0, which is
read-only and indicates presence of the Extended Capability Registers.
The KSZ8051 PHY has those registers while the KSZ87xx switch does not.
This patch implements simple check for the presence of this bit for
both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct
PHY driver instance.
Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If ctx->cached_sq_head < nxt_sq_head, we should add UINT_MAX to tmp, not
tmp_nxt.
Fixes: 5da0fb1ab34c ("io_uring: consider the overflow of sequence for timeout req")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We've got two issues with the non-regular file handling for non-blocking
IO:
1) We don't want to re-do a short read in full for a non-regular file,
as we can't just read the data again.
2) For non-regular files that don't support non-blocking IO attempts,
we need to punt to async context even if the file is opened as
non-blocking. Otherwise the caller always gets -EAGAIN.
Add two new request flags to handle these cases. One is just a cache
of the inode S_ISREG() status, the other tells io_uring that we always
need to punt this request to async context, even if REQ_F_NOWAIT is set.
Cc: stable@vger.kernel.org
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Tested-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The KSZ driver uses one regmap per register width (8/16/32), each with
it's own lock, but accessing the same set of registers. In theory, it
is possible to create a race condition between these regmaps, although
the underlying bus (SPI or I2C) locking should assure nothing bad will
really happen and the accesses would be correct.
To make the driver do the right thing, add one single shared mutex for
all the regmaps used by the driver instead. This assures that even if
some future hardware is on a bus which does not serialize the accesses
the same way SPI or I2C does, nothing bad will happen.
Note that the status_mutex was unused and only initied, hence it was
renamed and repurposed as the regmap mutex.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The KSZ87xx driver calls mutex_init() on mutexes already inited in
ksz_common.c ksz_switch_register(). Do not do it twice, drop the
reinitialization.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The stmmac_pcs_ctrl_ane() expects a register address as
argument 1, but for some reason the mac_device_info is
being passed.
Fix the warning (and possible bug) from sparse:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: expected void [noderef] <asn:2> *ioaddr
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: got struct mac_device_info *hw
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Depending on when MC connects the DPNI to a MAC, Tx FQIDs may
not be available during probe time.
Read the FQIDs each time the link goes up to avoid using invalid
values. In case an error occurs or an invalid value is retrieved,
fall back to QDID-based enqueueing.
Fixes: 1fa0f68c9255 ("dpaa2-eth: Use FQ-based DPIO enqueue API")
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IRQ for the DPNI endpoint change event, resolving the issue
when a dynamically created DPNI gets a randomly generated hw address
when the endpoint is a DPMAC object.
Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The serial state information must not be embedded into another
data structure, as this interferes with cache handling for DMA
on architectures without cache coherence..
That would result in data corruption on some architectures
Allocating it separately.
v2: fix syntax error
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While it is useful for new drivers to use devm_platform_ioremap_resource,
this script is currently used to spam maintainers, often updating very
old drivers. The net benefit is the removal of 2 lines of code in the
driver but the review load for the maintainers is huge. As of now, more
that 560 patches have been sent, some of them obviously broken, as in:
https://lore.kernel.org/lkml/9bbcce19c777583815c92ce3c2ff2586@www.loen.fr/
Remove the script to reduce the spam.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Przemysław Kopa reports that since commit b516ea586d71 ("PCI: Enable
NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his
2011 Samsung laptop refuses to runtime suspend, resulting in a power
regression and excessive heat.
Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M)
of the same era, as does another Arch Linux user named "R0AR" with a
more recent GeForce GTX 1050 Ti (GP107M).
The commit exposes the discrete GPU's HDA controller and all four codecs
on the controller do not set the CLKSTOP and EPSS bits in the Supported
Power States Response. They also do not set the PS-ClkStopOk bit in the
Get Power State Response. hda_codec_runtime_suspend() therefore does
not call snd_hdac_codec_link_down(), which prevents each codec and the
PCI device from runtime suspending.
The same issue is present on some AMD discrete GPUs and we addressed it
by forcing runtime PM despite the bits not being set, see commit
57cb54e53bdd ("ALSA: hda - Force to link down at runtime suspend on
ATI/AMD HDMI").
Do the same for Nvidia HDMI codecs.
Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512
Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81
Reported-by: Przemysław Kopa <prymoo@gmail.com>
Reported-by: Rivera Valdez <riveravaldez@ysinembargo.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Drake <dan@reactivated.net>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
GFP_NOWAIT allocation can fail anytime - it doesn't wait for memory being
available and it fails if the mempool is exhausted and there is not enough
memory.
If we go down this path:
map_bio -> mg_start -> alloc_migration -> mempool_alloc(GFP_NOWAIT)
we can see that map_bio() doesn't check the return value of mg_start(),
and the bio is leaked.
If we go down this path:
map_bio -> mg_start -> mg_lock_writes -> alloc_prison_cell ->
dm_bio_prison_alloc_cell_v2 -> mempool_alloc(GFP_NOWAIT) ->
mg_lock_writes -> mg_complete
the bio is ended with an error - it is unacceptable because it could
cause filesystem corruption if the machine ran out of memory
temporarily.
Change GFP_NOWAIT to GFP_NOIO, so that the mempool code will properly
wait until memory becomes available. mempool_alloc with GFP_NOIO can't
fail, so remove the code paths that deal with allocation failure.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to
pin 0x19, with default configuration value 0x411111f0 (indicating no
physical connection).
Enable this by quirking the pin. Mic jack detection was also tested and
found to be working.
This enables use of the headset mic on this product.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
BOSS Katana amplifiers cannot be used for recording or playback if quirks
are applied
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223
Signed-off-by: Szabolcs Szőke <szszoke.code@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191011171937.8013-1-szszoke.code@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
disable ptp_ref_clk in suspend flow, and enable it in resume flow.
Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers just call phy_ethtool_ksettings_set() to set the
links, for those phy drivers that use genphy_read_status(), if
autoneg is on, and the link is up, than execute "ethtool -s
ethx autoneg on" will cause "link partner" information disappear.
The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
the link didn't change, so genphy_read_status() just return, and
phydev->lp_advertising is zero now.
This patch moves the clear operation of lp_advertising from
phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
if autoneg on and autoneg not complete, just clear what the
generic functions care about.
Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
David Hildenbrand
Linus Torvalds
Navid Emamdoost
Tariq Toukan
Andrew Lunn
Stefano Garzarella
Ido Schimmel
Eric Dumazet
Doug Berger
Joerg Roedel
Kevin Hao
John Garry
Sean Wang
Wei Wang
Stefano Brivio
Marek Vasut
yangerkun
Jens Axboe
Ben Dooks (Codethink)
Ioana Radulescu
Florin Chiculita
Oliver Neukum
Alexandre Belloni
Lukas Wunner
Mikulas Patocka
Daniel Drake
Szabolcs Szőke
Biao Huang
Yonglong Liu