aboutsummaryrefslogtreecommitdiffstats
path: root/CREDITS (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-01-22Input: dm355evm_keys - drop unnecessary call to input_set_drvdataGuenter Roeck1-2/+0
Since there is no call to dev_get_drvdata() or input_get_drvdata(), the call to input_set_drvdata() is unnecessary and can be dropped. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: mouse - drop unnecessary calls to input_set_drvdataGuenter Roeck2-3/+0
Since there is no call to dev_get_drvdata() or input_get_drvdata(), the call to input_set_drvdata() is unnecessary and can be dropped. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: maplecontrol - drop unnecessary call to input_set_drvdataGuenter Roeck1-1/+0
Since there is no call to dev_get_drvdata() or input_get_drvdata(), the call to input_set_drvdata() is unnecessary and can be dropped. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: keyboard - drop unnecessary calls to input_set_drvdataGuenter Roeck6-11/+0
If there is no call to dev_get_drvdata() or input_get_drvdata(), the call to input_set_drvdata() is unnecessary and can be dropped. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: i8042 - add dbg msg when a command can't write its parameterMarcos Paulo de Souza1-2/+4
This can happen in cases like bug #102951[1], so add a proper debug msg as done in wait_read. Also, change wait_read debug message to differ from wait_write. [1] https://bugzilla.kernel.org/show_bug.cgi?id=102951 Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: max11801_ts - drop call to input_set_drvdata()Dmitry Torokhov1-1/+0
Nobody calls input_get_drvdata() so setting it is not required. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: pwm-beeper - switch to using "atomic" PWM APIDmitry Torokhov1-9/+17
The "atomic" API allows us to configure PWM period and duty cycle and enable it in one call. Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: pwm-beeper - add optional amplifier regulatorDavid Lechner2-13/+66
This adds an optional regulator to the pwm-beeper device. This regulator acts as an amplifier. The amplifier is only enabled while beeping in order to reduce power consumption. Tested on LEGO MINDSTORMS EV3, which has a speaker connected to PWM through an amplifier. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: pwm-beeper - suppress error message on probe deferDavid Lechner1-1/+3
This suppress printing an error message when pwm_get returns -EPROBE_DEFER. Otherwise you get a bunch of noise in the kernel log. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: pwm-beeper - fix race when suspendingDmitry Torokhov1-3/+18
Usually userspace sends SND_BELL and SND_TONE events, and by the time pwm_beeper_suspend() runs userpsace is already frozen, but theoretically in-kernel users may send these events too, and that may cause pwm_beeper_event() scheduling another work after we canceled it. Let's introduce a "suspended" flag and check it in pwm_beeper_event() to avoid this race. Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: pwm-beeper - use input_set_capability()Dmitry Torokhov1-2/+2
Instead of manipulating capability bits directly, let's use input_set_capability() API. Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: pwm-beeper - switch to using managed resourcesDmitry Torokhov1-34/+10
Use of managed resources (devm) simplifies error handling and tear down of the driver. Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: pwm-beeper - remove calls to legacy pwm_request APIDmitry Torokhov1-6/+0
There are no more users of pwm-beeper driver in mainline relying on this legacy API, so let's remove it and simplify the driver code. Acked-by: Thierry Reding <thierry.reding@gmail.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: misc - drop empty remove functionsGuenter Roeck5-30/+0
Empty remove functions don't serve a useful purpose and can be removed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: serio - drop unnecessary calls to device_init_wakeupGuenter Roeck1-1/+0
Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: touchscreen - drop unnecessary calls to device_init_wakeupGuenter Roeck5-7/+0
Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: misc - drop unnecessary calls to device_init_wakeupGuenter Roeck7-11/+0
Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: keyboard - drop unnecessary calls to device_init_wakeupGuenter Roeck5-11/+0
Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: touchscreen - use local variables consistentlyGuenter Roeck6-8/+7
If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: mouse - use local variables consistentlyGuenter Roeck9-42/+31
If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: misc - use local variables consistentlyGuenter Roeck3-7/+6
If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: keyboard - use local variables consistentlyGuenter Roeck4-27/+25
If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: touchscreen - drop calls to platform_set_drvdata and i2c_set_clientdataGuenter Roeck5-8/+0
There is no call to i2c_get_clientdata(), platform_get_drvdata(), or dev_get_drvdata() in any of the drivers in this patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: misc - drop calls to platform_set_drvdata and i2c_set_clientdataGuenter Roeck5-6/+0
There is no call to i2c_get_clientdata(), platform_get_drvdata(), or dev_get_drvdata() in any of the drivers in this patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: keyboard - drop calls to platform_set_drvdata and i2c_set_clientdataGuenter Roeck8-12/+0
There is no call to i2c_get_clientdata(), platform_get_drvdata(), or dev_get_drvdata() in any of the drivers in this patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: gpio-keys - add support for setkeycodeHans de Goede1-12/+28
gpio-keys input devices created by the soc_button_array driver are configured with key-codes based on ACPI provided information. Unfortunately on some tablets this info is wrong, and we need to have a quirk to fix things up. Add support for input_setkeycode to the gpio-keys driver, so that the existing udev hwdb mechanism can be used to fix things up on these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: soc_button_array - debounce the buttonsHans de Goede1-0/+2
The soc_button_array driver was initializing (kzalloc) the debounce_interval value to 0, leading to no debouncing at all, while the buttons are simple mechanical switches. This commit sets debounce_interval to 50ms to avoid spurious button press reports both on press and release of the button. Note 50ms may seem like a lot but soc_button_array is typically used with cheap tablets, with not so great buttons. I tried 10ms on my tablet and it is not enough, where as 50ms works well. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: tm2-touchkey - add touchkey driver support for TM2Jaechul Lee4-0/+325
This patch adds support for the TM2 touch key and led functionality. The driver interfaces with userspace through an input device and reports KEY_PHONE and KEY_BACK event types. LED brightness can be controlled by "/sys/class/leds/tm2-touchkey/brightness". Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: sis_i2c - drop unnecessary call to i2c_set_clientdataGuenter Roeck1-1/+0
There is no call to i2c_get_clientdata() or dev_get_drvdata(). Drop the unnecessary call to i2c_set_clientdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: bcm-keypad - drop unnecessary call to platform_set_drvdataGuenter Roeck1-2/+0
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: twl4030_keypad - drop unnecessary call to platform_set_drvdataGuenter Roeck1-1/+0
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: ab8500-ponkey - drop unnecessary call to platform_set_drvdataGuenter Roeck1-1/+0
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: tps65218-pwrbutton - drop unnecessary call to platform_set_drvdataGuenter Roeck1-5/+3
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to platform_set_drvdata(). Also use existing variable 'dev' instead of dereferencing it several times. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: soc_button_array - use 'dev' instead of dereferencing itGuenter Roeck1-3/+3
Use local variable 'dev' instead of dereferencing it several times. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: mma8450 - drop unnecessary call to i2c_set_clientdataGuenter Roeck1-2/+0
There is no call to i2c_get_clientdata() or dev_get_drvdata(). Drop the unnecessary call to i2c_set_clientdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: gpio_decoder - drop unnecessary call to platform_set_drvdataGuenter Roeck1-1/+0
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: bfin_rotary - switch to using devm_add_action_or_reset()Guenter Roeck1-6/+5
Use local variable 'dev' instead of dereferencing it several times and replace devm_add_action() and manual error handling with devm_add_action_or_reset(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: eeti_ts - drop goto to return statementGuenter Roeck1-3/+1
Replace 'goto l; ... l: return e;' with 'return e;' Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: atmel-wm97xx - drop unnecessary error messagesGuenter Roeck1-3/+1
Error messages after memory allocation failures are unnecessary and can be dropped, especially give that they were emitted as dev_dbg() so noone except person actively debugging the driver would see them. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: ar1021_i2c - drop unnecessary call to i2c_set_clientdataGuenter Roeck1-1/+0
There is no call to i2c_get_clientdata() or dev_get_drvdata(). Drop the unnecessary call to i2c_set_clientdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: xilinx_ps2 - use 'dev' instead of dereferencing itGuenter Roeck1-4/+3
Use local variable 'dev' instead of dereferencing it several times. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: at32psif - drop unnecessary error messages and other changesGuenter Roeck1-9/+3
Error messages after memory allocation failures are unnecessary and can be dropped, given that they are emitted as dev_dbg() so nobody except person actively debugging the driver would see them. Also replace jump to return 'goto l; ... l: return e;' with 'return e;' Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: cros_ec_keyb - drop unnecessary call to dev_set_drvdata and other changesGuenter Roeck1-2/+1
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to dev_set_drvdata(). Other relevant changes: Use existing variable 'dev' instead of dereferencing it several times This conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop dev_set_drvdata() - Use local variable 'struct device *dev' consistently Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-17Input: tca8418 - use the interrupt trigger from the device treeMaxime Ripard1-3/+3
The TCA8418 might be used using different interrupt triggers on various boards. This is not working so far because the current code forces a falling edge trigger. The device tree already provides a trigger type, so let's use whatever it sets up, and since we can be loaded without DT, keep the old behaviour for the non-DT case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: cyapa - use msleep() for long delayNicholas Mc Guire1-1/+1
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 50ms delays here to use msleep() and reduce the load on the hrtimer subsystem. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: cyapa - use time based retry loopNicholas Mc Guire1-15/+12
Using counter based retry loops for peripherals results in the delay being significantly overrun during high-load situations where delay functions tend to be vary imprecise and overrun there timeouts. So condition the termination on the actual condition of 2s for the re-calibration to have been successful. As this is a very long delay there is no advantage in using high-resolution timers thus switching this to msleep(). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - switch to device tree probeAkinobu Mita3-63/+124
This driver currently only supports legacy platform data probe. This change adds device tree support and gets rid of platform data probe code since no one is actually using mpr121 platform data in the mainline. The device tree property parsing code is based on the work of atmel_captouch driver. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - handle multiple bits change of status registerAkinobu Mita1-9/+14
This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - set missing event capabilityAkinobu Mita1-0/+1
This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - remove unused field in struct mpr121_touchkeyAkinobu Mita1-1/+0
Remove unused key_val field in struct mpr121_touchkey. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.