aboutsummaryrefslogtreecommitdiffstats
path: root/CREDITS (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-26ice: Update comment regarding the ITR_GRAN_SBrett Creeley1-1/+1
Since the driver now hard codes the ITR granularity to 2 us in the GLINT_CTL register the comment next to ITR_GRAN_S needs to be updated. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Update function header for __ice_vsi_get_qsAnirudh Venkataramanan1-4/+3
Remove some redundant text in the function header for __ice_vsi_get_qs Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Remove unnecessary bracesAnirudh Venkataramanan1-2/+1
Single statement if conditions don't need braces. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Remove unused function prototypeAnirudh Venkataramanan1-2/+0
Commit 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7") seems to have inadvertently introduced a function prototype for ice_vsi_cfg_tc without a corresponding function implementation. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Add missing case in print_link_msg for printing flow controlBrett Creeley1-0/+3
Currently we aren't checking for the ICE_FC_NONE case for the current flow control mode. This is causing "Unknown" to be printed for the current flow control method if flow control is disabled. Fix this by adding the case for ICE_FC_NONE to print "None". Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Audit hotpath structures with paholeBrett Creeley4-20/+15
Currently the ice_q_vector structure and ice_ring_container structure are taking up more space than necessary due to cache alignment holes and unnecessary variables respectively. This is not helping the driver's performance. The following fixes were done to improve cache alignment, reduce wasted space, and increase performance. 1. Remove the ice_latency_range enum as it is unused. 2. Remove the latency_range variable in the ice_ring_container structure. 3. Change the size of the itr_idx in the ice_ring_container structure from an int to an u16. This reduced the size of ice_ring_container structure to 32 Bytes so it has no holes or padding. 4. Re-arrange the ice_q_vector structure using pahole to align members as best as possible in regards to 64 Byte cache line size. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Do not bail out when filter already existsPreethi Banala1-1/+5
If filter already exists, do not go through error path flow but instead continue to process rest of the function. Hence have an appropriate check after adding MAC filters. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Fix issue with VF attempt to delete default MAC addressAkeem G Abodunrin1-8/+7
This patch fixes issue that occurs when VF is attempting to remove default LAN/MAC address, which is programmed by the administrator. We shouldn't return error for the call by the VF, but continue with the remaining steps to handle MAC opcode. Also update the dev_err message to explicitly say that VF can't change MAC programmed by PF. Also change "mac" to "MAC" for kernel print statements in the same file. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: enable VF admin queue interruptsMitch Williams2-0/+6
The VPINT_MBX_CTL register array must be programmed to enable VF admin queue interrupts. Without this, VFs never get interrupts on vector 0, and some VF drivers will fail to init. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Fix for adaptive interrupt moderationAnirudh Venkataramanan3-24/+275
commit 63f545ed1285 ("ice: Add support for adaptive interrupt moderation") was meant to add support for adaptive interrupt moderation but there was an error on my part while formatting the patch, and thus only part of the patch ended up being submitted. This patch rectifies the error by adding the rest of the code. Fixes: 63f545ed1285 ("ice: Add support for adaptive interrupt moderation") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Implement pci_error_handler opsBrett Creeley1-0/+151
This patch implements the following pci_error_handler ops: .error_detected = ice_pci_err_detected .slot_reset = ice_pci_err_slot_reset .reset_notify = ice_pci_err_reset_notify .reset_prepare = ice_pci_err_reset_prepare .reset_done = ice_pci_err_reset_done .resume = ice_pci_err_resume Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Put __ICE_PREPARED_FOR_RESET check in ice_prepare_for_resetBrett Creeley1-2/+5
Currently we check if the __ICE_PREPARED_FOR_RESET bit is set prior to calling ice_prepare_for_reset in ice_reset_subtask(), but we aren't checking that bit in ice_do_reset() before calling ice_prepare_for_reset(). This is not consistent and can cause issues if ice_prepare_for_reset() is called prior to ice_do_reset(). Fix this by checking if the __ICE_PREPARED_FOR_RESET bit is set internal to ice_prepare_for_reset(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: use virt channel status codesMitch Williams1-119/+154
When communicating with the AVF driver, we need to use the status codes from virtchnl.h, not our own ice-specific codes. Without this, when an error occurs, the VF will report nonsensical results. NOTE: this depends on changes made to include/linux/avf/virtchnl.h by commit bb58fd7eeffc ("i40e: Update status codes") Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ice: Remove unnecessary newlines from log messagesJeremiah Kyle1-2/+2
Two log messages contained newlines in the middle of the message. This resulted in unexpected driver log output. This patch removes the newlines to restore consistency with the rest of the driver log messages. Signed-off-by: Jeremiah Kyle <jeremiah.kyle@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26SUNRPC: fix uninitialized variable warningAlakesh Haloi1-2/+2
Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-26openvswitch: add seqadj extension when NAT is used.Flavio Leitner1-0/+6
When the conntrack is initialized, there is no helper attached yet so the nat info initialization (nf_nat_setup_info) skips adding the seqadj ext. A helper is attached later when the conntrack is not confirmed but is going to be committed. In this case, if NAT is needed then adds the seqadj ext as well. Fixes: 16ec3d4fbb96 ("openvswitch: Fix cached ct with helper.") Signed-off-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26selftests: bpf: don't depend on hardcoded perf sample_freqStanislav Fomichev1-1/+15
When running stacktrace_build_id_nmi, try to query kernel.perf_event_max_sample_rate sysctl and use it as a sample_freq. If there was an error reading sysctl, fallback to 5000. kernel.perf_event_max_sample_rate sysctl can drift and/or can be adjusted by the perf tool, so assuming a fixed number might be problematic on a long running machine. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-26dpaa2-eth: use netif_receive_skb_listIoana Ciornei2-1/+8
Take advantage of the software Rx batching by using netif_receive_skb_list instead of napi_gro_receive. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26dpaa2-eth: fix race condition with bql frame accountingIoana Ciornei1-4/+9
It might happen that Tx conf acknowledges a frame before it was subscribed in bql, as subscribing was previously done after the enqueue operation. This patch moves the netdev_tx_sent_queue call before the actual frame enqueue, so that this can never happen. Fixes: 569dac6a5a0d ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26chelsio: use BUG() instead of BUG_ON(1)Arnd Bergmann2-2/+2
clang warns about possible bugs in a dead code branch after BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled: drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here return buf_size; ^~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning int buf_size; ^ = 0 Use BUG() here to create simpler code that clang understands correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26tipc: fix return value check in tipc_mcast_send_sync()Wei Yongjun1-1/+1
Fix the return value check which testing the wrong variable in tipc_mcast_send_sync(). Fixes: c55c8edafa91 ("tipc: smooth change between replicast and broadcast") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: phy: aquantia: inform about proprietary 1000Base-T2 mode being in useHeiner Kallweit1-1/+13
The AQCS109 supports a proprietary 2-pair 1Gbps mode. The standard registers don't allow to tell between 1000BaseT and 1000BaseT2. Add reporting this proprietary mode based on a vendor register. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: phy: aquantia: report PHY details like firmware versionHeiner Kallweit1-0/+62
Add reporting firmware details. These details are available only once the firmware has finished initializing the chip. This can take some time and we need to poll for init completion. v2: - Propagate timeout in aqr107_wait_reset_complete(). Don't bail out completely on timeout because chip may be functional even w/o firmware image. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: phy: aquantia: print remote capabilities if link partner is Aquantia PHYHeiner Kallweit1-0/+49
If both link partners are Aquantia PHY's then additional information is exchanged as part of the auto-negotiation. Report remote capabilities if link partner is Aquantia PHY. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: dsa: Avoid null pointer when failing to connect to PHYVladimir Oltean1-4/+4
When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the day by connecting to an alternative PHY, none other than a PHY on the switch's internal MDIO bus, at an address equal to the port's index. However this does not take into consideration the scenario when the switch that failed to probe an external PHY does not have an internal MDIO bus at all. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: devlink: skip info_get op call if it is not defined in dumpitJiri Pirko1-0/+5
In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf22882c60 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: phy: bcm54xx: Encode link speed and activity into LEDsVladimir Oltean2-0/+29
Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26tipc: change to check tipc_own_id to return in tipc_net_stopXin Long1-4/+1
When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: usb: aqc111: Extend HWID table by QNAP deviceDmitry Bezrukov2-0/+23
New device of QNAP based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: sched: Kconfig: update reference link for PIELeslie Monis1-2/+1
RFC 8033 replaces the IETF draft for PIE Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: phy: aquantia: simplify aqr_config_anegHeiner Kallweit1-32/+13
Simplify aqr_config_aneg(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: dsa: qca8k: extend slave-bus implementationsChristian Lamparter2-1/+168
This patch implements accessors for the QCA8337 MDIO access through the MDIO_MASTER register, which makes it possible to access the PHYs on slave-bus through the switch. In cases where the switch ports are already mapped via external "phy-phandles", the internal mdio-bus is disabled in order to prevent a duplicated discovery and enumeration of the same PHYs. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: dsa: qca8k: remove leftover phy accessorsChristian Lamparter1-18/+0
This belated patch implements Andrew Lunn's request of "remove the phy_read() and phy_write() functions." <https://lore.kernel.org/patchwork/comment/902734/> While seemingly harmless, this causes the switch's user port PHYs to get registered twice. This is because the DSA subsystem will create a slave mdio-bus not knowing that the qca8k_phy_(read|write) accessors operate on the external mdio-bus. So the same "bus" gets effectively duplicated. Cc: stable@vger.kernel.org Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26dt-bindings: net: dsa: qca8k: support internal mdio-busChristian Lamparter1-5/+64
This patch updates the qca8k's binding to document to the approach for using the internal mdio-bus of the supported qca8k switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26dt-bindings: net: dsa: qca8k: fix exampleChristian Lamparter1-2/+2
In the example, the phy at phy@0 is clashing with the switch0@0 at the same address. Usually, the switches are accessible through pseudo PHYs which in case of the qca8k are located at 0x10 - 0x18. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26ftrace: Fix warning using plain integer as NULL & spelling correctionsHariprasad Kelam1-6/+6
Changed 0 --> NULL to avoid sparse warning Corrected spelling mistakes reported by checkpatch.pl Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace CHECK kernel/trace/ftrace.c kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-26tracing: initialize variable in create_dyn_event()Frank Rowand1-1/+1
Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized in this function [-Wuninitialized]. Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Fixes: 5448d44c3855 ("tracing: Add unified dynamic event framework") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-26tracing: Remove unnecessary var_ref destroy in track_data_destroy()Tom Zanussi1-1/+0
Commit 656fe2ba85e8 (tracing: Use hist trigger's var_ref array to destroy var_refs) centralized the destruction of all the var_refs in one place so that other code didn't have to do it. The track_data_destroy() added later ignored that and also destroyed the track_data var_ref, causing a double-free error flagged by KASAN. ================================================================== BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70 Read of size 8 at addr ffff888086df2210 by task bash/1694 CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x71/0xa0 ? destroy_hist_field+0x30/0x70 print_address_description.cold.3+0x9/0x1fb ? destroy_hist_field+0x30/0x70 ? destroy_hist_field+0x30/0x70 kasan_report.cold.4+0x1a/0x33 ? __kasan_slab_free+0x100/0x150 ? destroy_hist_field+0x30/0x70 destroy_hist_field+0x30/0x70 track_data_destroy+0x55/0xe0 destroy_hist_data+0x1f0/0x350 hist_unreg_all+0x203/0x220 event_trigger_open+0xbb/0x130 do_dentry_open+0x296/0x700 ? stacktrace_count_trigger+0x30/0x30 ? generic_permission+0x56/0x200 ? __x64_sys_fchdir+0xd0/0xd0 ? inode_permission+0x55/0x200 ? security_inode_permission+0x18/0x60 path_openat+0x633/0x22b0 ? path_lookupat.isra.50+0x420/0x420 ? __kasan_kmalloc.constprop.12+0xc1/0xd0 ? kmem_cache_alloc+0xe5/0x260 ? getname_flags+0x6c/0x2a0 ? do_sys_open+0x149/0x2b0 ? do_syscall_64+0x73/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ? _raw_write_lock_bh+0xe0/0xe0 ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x2f/0x50 ? __list_add_valid+0x2d/0x70 ? deactivate_slab.isra.62+0x1f4/0x5a0 ? getname_flags+0x6c/0x2a0 ? set_track+0x76/0x120 do_filp_open+0x11a/0x1a0 ? may_open_dev+0x50/0x50 ? _raw_spin_lock+0x7a/0xd0 ? _raw_write_lock_bh+0xe0/0xe0 ? __alloc_fd+0x10f/0x200 do_sys_open+0x1db/0x2b0 ? filp_open+0x50/0x50 do_syscall_64+0x73/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa7b24a4ca2 Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0 75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2 RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240 ================================================================== So remove the track_data_destroy() destroy_hist_field() call for that var_ref. Link: http://lkml.kernel.org/r/1deffec420f6a16d11dd8647318d34a66d1989a9.camel@linux.intel.com Fixes: 466f4528fbc69 ("tracing: Generalize hist trigger onmax and save action") Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-25net: phy: don't clear BMCR in genphy_soft_resetHeiner Kallweit1-1/+1
So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid <preid@electromag.com.au> Tested-by: liweihang <liweihang@hisilicon.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25Revert "parport: daisy: use new parport device model"Linus Torvalds4-54/+3
This reverts commit 1aec4211204d9463d1fd209eb50453de16254599. Steven Rostedt reports that it causes a hang at bootup and bisected it to this commit. The troigger is apparently a module alias for "parport_lowlevel" that points to "parport_pc", which causes a hang with modprobe -q -- parport_lowlevel blocking forever with a backtrace like this: wait_for_completion_killable+0x1c/0x28 call_usermodehelper_exec+0xa7/0x108 __request_module+0x351/0x3d8 get_lowlevel_driver+0x28/0x41 [parport] __parport_register_driver+0x39/0x1f4 [parport] daisy_drv_init+0x31/0x4f [parport] parport_bus_init+0x5d/0x7b [parport] parport_default_proc_register+0x26/0x1000 [parport] do_one_initcall+0xc2/0x1e0 do_init_module+0x50/0x1d4 load_module+0x1c2e/0x21b3 sys_init_module+0xef/0x117 Supid says: "Due to the new device model daisy driver will now try to find the parallel ports while trying to register its driver so that it can bind with them. Now, since daisy driver is loaded while parport bus is initialising the list of parport is still empty and it tries to load the lowlevel driver, which has an alias set to parport_pc, now causes a deadlock" But I don't think the daisy driver should be loaded by the parport initialization in the first place, so let's revert the whole change. If the daisy driver can just initialize separately on its own (like a driver should), instead of hooking into the parport init sequence directly, this issue probably would go away. Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reported-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-25ice: Create a generic name for the ice_rx_flg64_bits structureChinh T Cao2-30/+30
This structure is used to define the packet flags. These flags are applicable for both TX and RX packet. Thus, this patch changes its name from ice_rx_flag64_bits to ice_flg64_bits, and its member definition. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: add and use new ice_for_each_traffic_class() macroBruce Allan4-4/+7
There are numerous for() loops iterating over each of the max traffic classes. Use a simple iterator macro instead to make the code cleaner. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: change VF VSI tc info along with num_queuesPreethi Banala1-0/+3
Update VF VSI tc info along with vsi->num_txq/num_rxq when VF requests to configure queues. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: Prevent unintended multiple chain resetsDave Ertman1-2/+8
In the current implementation of ice_reset_subtask, if multiple reset types are set in the pf->state, the most intrusive one is meant to be performed only, but the bits requesting the other types are not being cleared. This would lead to another reset being performed the next time the service task is scheduled. Change the flow of ice_reset_subtask so that all reset request bits in pf->state are cleared, and we still perform the most intrusive of the resets requested. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: map Rx buffer pages with DMA attributesMaciej Fijalkowski2-4/+23
Provide DMA_ATTR_WEAK_ORDERING and DMA_ATTR_SKIP_CPU_SYNC attributes to the DMA API during the mapping operations on Rx side. With this change the non-x86 platforms will be able to sync only with what is being used (2k buffer) instead of entire page. This should yield a slight performance improvement. Furthermore, DMA unmap may destroy the changes that were made to the buffer by CPU when platform is not a x86 one. DMA_ATTR_SKIP_CPU_SYNC attribute usage fixes this issue. Also add a sync_single_for_device call during the Rx buffer assignment, to make sure that the cache lines are cleared before device attempting to write to the buffer. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: Limit the ice_add_rx_frag to frag additionMaciej Fijalkowski1-81/+79
Refactor ice_fetch_rx_buf and ice_add_rx_frag in a way that we have standalone functions that do either the skb construction or frag addition to previously constructed skb. The skb handling between rx_bufs is spread among various functions. The ice_get_rx_buf will retrieve the skb pointer from rx_buf and if it is a NULL pointer then we do the ice_construct_skb, otherwise we add a frag to the current skb via ice_add_rx_frag. Then, on the ice_put_rx_buf the skb pointer that belongs to rx_buf will be cleared. Moving further, if the current frame is not EOP frame we assign the current skb to the rx_buf that is pointed by updated next_to_clean indicator. What is more during the buffer reuse let's assign each member of ice_rx_buf individually so we avoid the unnecessary copy of skb. Last but not least, this logic split will allow us for better code reuse when adding a support for build_skb. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: Gather the rx buf clean-up logic for better reuseMaciej Fijalkowski1-26/+50
Pull out the code responsible for page counting and buffer recycling so that it will be possible to clean up the Rx buffers in cases where we won't allocate skb (ex. XDP) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: Introduce bulk update for page countMaciej Fijalkowski2-7/+20
{get,put}_page are atomic operations which we use for page count handling. The current logic for refcount handling is that we increment it when passing a skb with the data from the first half of page up to netstack and recycle the second half of page. This operation protects us from losing a page since the network stack can decrement the refcount of page from skb. The performance can be gently improved by doing the bulk updates of refcount instead of doing it one by one. During the buffer initialization, maximize the page's refcount and don't allow the refcount to become less than two. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: Get rid of ice_pull_tailMaciej Fijalkowski1-46/+24
Instead of adding a frag and later when dealing with EOP frame accessing that frag in order to copy the headers onto linear part of skb, we can do this in ice_add_rx_frag in case where the data_len is still 0 and frame won't fit onto the linear part as a whole. Function comment of ice_pull_tail was a bit misleading because of mentioned optimizations that can be performed (drop a frag/maintaining accurate truesize of skb) - it seems that this part of logic was dropped and the comment was not updated to reflect this change. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-25ice: Pull out page reuse checks onto separate functionMaciej Fijalkowski1-35/+45
Introduce ice_can_reuse_rx_page which will verify whether the page can be reused and return the boolean result to caller. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.