aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/DMA-attributes.txt (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-04-22vlan: unnecessary to check if vlan_pcpu_stats is NULLLi RongQing1-30/+28
if allocating memory for vlan_pcpu_stats failed, the device can not be operated Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22be2net: Support for configurable RSS hash keyVenkata Duvvuru5-31/+113
This be2net patch implements the get/set_rxfh() ethtool hooks. RSS_CONFIG device command is invoked to set hashkey and indirection table. It also uses an initial random value for RSS hash key instead of a hard-coded value as hard-coded values for a hash-key are usually considered a security risk. Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22ethtool: Support for configurable RSS hash keyVenkata Duvvuru3-14/+252
This ethtool patch primarily copies the ioctl command data structures from/to the User space and invokes the driver hook. Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22neterion/s2io: remove unused s2io_start_tx_queue routineYing Xue1-9/+0
Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tcp: avoid retransmits of TCP packets hanging in host queuesEric Dumazet1-8/+26
In commit 0e280af026a5 ("tcp: introduce TCPSpuriousRtxHostQueues SNMP counter") we added a logic to detect when a packet was retransmitted while the prior clone was still in a qdisc or driver queue. We are now confident we can do better, and catch the problem before we fragment a TSO packet before retransmit, or in TLP path. This patch fully exploits the logic by simply canceling the spurious retransmit. Original packet is in a queue and will eventually leave the host. This helps to avoid network collapses when some events make the RTO estimations very wrong, particularly when dealing with huge number of sockets with synchronized blast. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22ipv6: support IFA_F_MANAGETEMPADDR for address deletion tooHeiner Kallweit1-4/+16
Userspace applications can use IFA_F_MANAGETEMPADDR with RTM_NEWADDR already to indicate that the kernel should take care of temporary address management. This patch adds related functionality to RTM_DELADDR. By setting IFA_F_MANAGETEMPADDR a userspace application can indicate that the kernel should delete all related temporary addresses as well. A corresponding patch for the "ip addr del" command has been applied to iproute2 already. Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: fix race in disc create/deleteYing Xue3-20/+37
Commit a21a584d6720ce349b05795b9bcfab3de8e58419 (tipc: fix neighbor detection problem after hw address change) introduces a race condition involving tipc_disc_delete() and tipc_disc_add/remove_dest that can cause TIPC to dereference the pointer to the bearer discovery request structure after it has been freed since a stray pointer is left in the bearer structure. In order to fix the issue, the process of resetting the discovery request handler is optimized: the discovery request handler and request buffer are just reset instead of being freed, allocated and initialized. As the request point is always valid and the request's lock is taken while the request handler is reset, the race doesn't happen any more. Reported-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: use bc_lock to protect node map in bearer structureYing Xue3-12/+13
The node map variable - 'nodes' in bearer structure is only used by bclink. When bclink accesses it, bc_lock is held. But when change it, for instance, in tipc_bearer_add_dest() or tipc_bearer_remove_dest() the bc_lock is not taken at all. To avoid any inconsistent data, we should always grab bc_lock while accessing node map variable. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: use bearer_disable to disable bearer in tipc_l2_device_eventYing Xue1-1/+1
As bearer pointer is known in tipc_l2_device_event(), it's unnecessary to search it again in tipc_disable_bearer(). If tipc_disable_bearer() is replaced with bearer_disable() in tipc_l2_device_event(), this will help us save a bit time when bearer is disabled. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: make media_ptr pointed netdevice validYing Xue1-0/+1
The 'media_ptr' pointer in bearer structure which points to network device, is protected by RCU. So, before netdevice is released, synchronize_net() should be involved to prevent no any user of the netdevice on read side from accessing it after it is freed. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: purge tipc_net_lock lockYing Xue7-100/+42
Now tipc routing hierarchy comprises the structures 'node', 'link'and 'bearer'. The whole hierarchy is protected by a big read/write lock, tipc_net_lock, to ensure that nothing is added or removed while code is accessing any of these structures. Obviously the locking policy makes node, link and bearer components closely bound together so that their relationship becomes unnecessarily complex. In the worst case, such locking policy not only has a negative influence on performance, but also it's prone to lead to deadlock occasionally. In order o decouple the complex relationship between bearer and node as well as link, the locking policy is adjusted as follows: - Bearer level RTNL lock is used on update side, and RCU is used on read side. Meanwhile, all bearer instances including broadcast bearer are saved into bearer_list array. - Node and link level All node instances are saved into two tipc_node_list and node_htable lists. The two lists are protected by node_list_lock on write side, and they are guarded with RCU lock on read side. All members in node structure including link instances are protected by node spin lock. - The relationship between bearer and node When link accesses bearer, it first needs to find the bearer with its bearer identity from the bearer_list array. When bearer accesses node, it can iterate the node_htable hash list with the node address to find the corresponding node. In the new locking policy, every component has its private locking solution and the relationship between bearer and node is very simple, that is, they can find each other with node address or bearer identity from node_htable hash list or bearer_list array. Until now above all changes have been done, so tipc_net_lock can be removed safely. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: use RCU to protect media_ptr pointerYing Xue2-4/+11
Now the media_ptr pointer is protected with tipc_net_lock write lock on write side; tipc_net_lock read lock is used to read side. As the part of effort of eliminating tipc_net_lock, we decide to adjust the locking policy of media_ptr pointer protection: on write side, RTNL lock is use while on read side RCU read lock is applied. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: decouple the relationship between bearer and linkYing Xue7-46/+88
Currently on both paths of message transmission and reception, the read lock of tipc_net_lock must be held before bearer is accessed, while the write lock of tipc_net_lock has to be taken before bearer is configured. Although it can ensure that bearer is always valid on the two data paths, link and bearer is closely bound together. So as the part of effort of removing tipc_net_lock, the locking policy of bearer protection will be adjusted as below: on the two data paths, RCU is used, and on the configuration path of bearer, RTNL lock is applied. Now RCU just covers the path of message reception. To make it possible to protect the path of message transmission with RCU, link should not use its stored bearer pointer to access bearer, but it should use the bearer identity of its attached bearer as index to get bearer instance from bearer_list array, which can help us decouple the relationship between bearer and link. As a result, bearer on the path of message transmission can be safely protected by RCU when we access bearer_list array within RCU lock protection. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: convert bearer_list to RCU listYing Xue3-13/+18
Convert bearer_list to RCU list. It's protected by RTNL lock on update side, and RCU read lock is applied to read side. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: use RTNL lock to protect tipc_net_stop routineYing Xue1-0/+2
As the tipc network initialization(ie, tipc_net_start routine) is under RTNL protection, its corresponding deinitialization part(ie, tipc_net_stop routine) should be protected by RTNL too. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: adjust locking policy of protecting tipc_ptr pointer of net_deviceYing Xue1-8/+3
Currently the 'tipc_ptr' pointer is protected by tipc_net_lock write lock on write side, and RCU read lock is applied to read side. In addition, there have two paths on write side where we may change variables pointed by the 'tipc_ptr' pointer: one is to configure bearer by tipc-config tool and another one is that bearer status is changed by notification events of its attached interface. But on the latter path, we improperly deem that accessing 'tipc_ptr' pointer happens on read side with rcu_read_lock() although some variables pointed by the 'tipc_ptr' pointer are changed possibly. Moreover, as now the both paths are guarded by RTNL lock, it's better to adjust the locking policy of 'tipc_ptr' pointer protection, allowing RTNL instead of tipc_net_lock write lock to protect it on write side, which will help us purge tipc_net_lock in the future. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22tipc: replace config_mutex lock with RTNL lockYing Xue2-5/+3
There have two paths where we can configure or change bearer status: one is that bearer is configured from user space with tipc-config tool; another one is that bearer is changed by notification events from its attached interface. On the first path, one dedicated config_mutex lock is guarded; on the latter path, RTNL lock has been placed to serialize the process of dealing with interface events. So, if RTNL lock is also used to protect the first path, this will not only extremely help us simplify current locking policy, but also config_mutex lock can be deleted as well. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21stmmac: remove stmmac_configFlorian Fainelli1-22/+0
stmmac_config() denies changing the base address and interrupt parameters, and ignores any other settings from the ifmap parameters, thus making stmmac_config() useless, remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21net: sxgbe: remove sxgbe_configFlorian Fainelli1-35/+0
sxgbe_config() denies changing the base address and interrupt, and ignores all other 'struct ifmap' members, which means that it is useless as is, so let's remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21net: cpmac: remove cpmac_configFlorian Fainelli1-14/+0
cpmac_config() refuses changing the base address parameter, and ignores all other parameters, which means that it is pretty useless as it is, so let's remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21net: ethoc: remove ethoc_configFlorian Fainelli1-6/+0
ethoc_config() returns -ENOSYS and does not implement anything useful, let's remove it such that net/core/dev_ioctl.c::dev_ifsioc can return something meaningful like -EOPNOTSUPP. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21hyperv: Add support for virtual Receive Side Scaling (vRSS)Haiyang Zhang4-34/+504
This feature allows multiple channels to be used by each virtual NIC. It is available on Hyper-V host 2012 R2. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20tcp: make tcp_cwnd_application_limited() staticWeiping Pan3-23/+22
Make tcp_cwnd_application_limited() static and move it from tcp_input.c to tcp_output.c Signed-off-by: Weiping Pan <wpan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-206lowpan: include net/net_namespace.h on 6lowpan namepsace headerLuis R. Rodriguez1-0/+1
Don't rely on driver files or other headers having this file included. CC: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: linux-zigbee-devel@lists.sourceforge.net Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-206lowpan: make lowpan_cb staticLuis R. Rodriguez1-1/+1
CC: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: linux-zigbee-devel@lists.sourceforge.net Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-206lowpan: add helper to get 6lowpan namespaceLuis R. Rodriguez2-16/+45
This will simplify the new reassembly backport with no code changes being required. CC: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: linux-zigbee-devel@lists.sourceforge.net Cc: David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20sctp: add support for busy polling to sctp protocolNeil Horman2-0/+9
The busy polling socket option adds support for sockets to busy wait on data arriving on the napi queue from which they have most recently received a frame. Currently only tcp and udp support this feature, but theres no reason sctp can't do so as well. Add it in so appliations can take advantage of it Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: netdev@vger.kernel.org Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20net: sxgbe: make local functions staticJingoo Han1-8/+7
Make local functions static, because these are used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20macvlan: Move broadcasts into a work queueHerbert Xu1-23/+93
Currently broadcasts are handled in network RX context, where the packets are sent through netif_rx. This means that the number of macvlans will be constrained by the capacity of netif_rx. For example, setting up 4096 macvlans practically causes all broadcast packets to be dropped as the default netif_rx queue size simply can't handle 4096 skbs being stuffed into it all at once. Fundamentally, we need to ensure that the amount of work handled in each netif_rx backlog run is constrained. As broadcasts are anything but constrained, it either needs to be limited per run or moved to process context. This patch picks the second option and moves all broadcast handling bar the trivial case of packets going to a single interface into a work queue. Obviously there also needs to be a limit on how many broadcast packets we postpone in this way. I've arbitrarily chosen tx_queue_len of the master device as the limit (act_mirred also happens to use this parameter in a similar way). In order to ensure we don't exceed the backlog queue we will use netif_rx_ni instead of netif_rx for broadcast packets. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20net: Add __dev_forward_skbHerbert Xu2-18/+25
This patch adds the helper __dev_forward_skb which is identical to dev_forward_skb except that it doesn't actually inject the skb into the stack. This is useful where we wish to have finer control over how the packet is injected, e.g., via netif_rx_ni or netif_receive_skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listnerKenjiro Nakayama1-0/+8
This patch adds a TCP_FASTOPEN socket option to get a max backlog on its listener to getsockopt(). Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20net: phy: at803x: use genphy_config_init()Daniel Mack1-33/+3
Use the generic bits from genphy_config_init() instead of implementing the same functionality again. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20net: phy: export genphy_config_init()Daniel Mack2-1/+3
This enables other drivers to call this generic implementation, and then only do specific details on top of it. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18thp: close race between split and zap huge pagesKirill A. Shutemov1-3/+10
Sasha Levin has reported two THP BUGs[1][2]. I believe both of them have the same root cause. Let's look to them one by one. The first bug[1] is "kernel BUG at mm/huge_memory.c:1829!". It's BUG_ON(mapcount != page_mapcount(page)) in __split_huge_page(). From my testing I see that page_mapcount() is higher than mapcount here. I think it happens due to race between zap_huge_pmd() and page_check_address_pmd(). page_check_address_pmd() misses PMD which is under zap: CPU0 CPU1 zap_huge_pmd() pmdp_get_and_clear() __split_huge_page() anon_vma_interval_tree_foreach() __split_huge_page_splitting() page_check_address_pmd() mm_find_pmd() /* * We check if PMD present without taking ptl: no * serialization against zap_huge_pmd(). We miss this PMD, * it's not accounted to 'mapcount' in __split_huge_page(). */ pmd_present(pmd) == 0 BUG_ON(mapcount != page_mapcount(page)) // CRASH!!! page_remove_rmap(page) atomic_add_negative(-1, &page->_mapcount) The second bug[2] is "kernel BUG at mm/huge_memory.c:1371!". It's VM_BUG_ON_PAGE(!PageHead(page), page) in zap_huge_pmd(). This happens in similar way: CPU0 CPU1 zap_huge_pmd() pmdp_get_and_clear() page_remove_rmap(page) atomic_add_negative(-1, &page->_mapcount) __split_huge_page() anon_vma_interval_tree_foreach() __split_huge_page_splitting() page_check_address_pmd() mm_find_pmd() pmd_present(pmd) == 0 /* The same comment as above */ /* * No crash this time since we already decremented page->_mapcount in * zap_huge_pmd(). */ BUG_ON(mapcount != page_mapcount(page)) /* * We split the compound page here into small pages without * serialization against zap_huge_pmd() */ __split_huge_page_refcount() VM_BUG_ON_PAGE(!PageHead(page), page); // CRASH!!! So my understanding the problem is pmd_present() check in mm_find_pmd() without taking page table lock. The bug was introduced by me commit with commit 117b0791ac42. Sorry for that. :( Let's open code mm_find_pmd() in page_check_address_pmd() and do the check under page table lock. Note that __page_check_address() does the same for PTE entires if sync != 0. I've stress tested split and zap code paths for 36+ hours by now and don't see crashes with the patch applied. Before it took <20 min to trigger the first bug and few hours for second one (if we ignore first). [1] https://lkml.kernel.org/g/<53440991.9090001@oracle.com> [2] https://lkml.kernel.org/g/<5310C56C.60709@oracle.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Dave Jones <davej@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18mm: fix new kernel-doc warning in filemap.cRandy Dunlap1-1/+0
Fix new kernel-doc warning in mm/filemap.c: Warning(mm/filemap.c:2600): Excess function parameter 'ppos' description in '__generic_file_aio_write' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18mm: fix CONFIG_DEBUG_VM_RB descriptionDavidlohr Bueso1-2/+1
This appears to be a copy/paste error. Update the description to reflect extra rbtree debug and checks for the config option instead of duplicating CONFIG_DEBUG_VM. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18mm: use paravirt friendly ops for NUMA hinting ptesMel Gorman1-8/+23
David Vrabel identified a regression when using automatic NUMA balancing under Xen whereby page table entries were getting corrupted due to the use of native PTE operations. Quoting him Xen PV guest page tables require that their entries use machine addresses if the preset bit (_PAGE_PRESENT) is set, and (for successful migration) non-present PTEs must use pseudo-physical addresses. This is because on migration MFNs in present PTEs are translated to PFNs (canonicalised) so they may be translated back to the new MFN in the destination domain (uncanonicalised). pte_mknonnuma(), pmd_mknonnuma(), pte_mknuma() and pmd_mknuma() set and clear the _PAGE_PRESENT bit using pte_set_flags(), pte_clear_flags(), etc. In a Xen PV guest, these functions must translate MFNs to PFNs when clearing _PAGE_PRESENT and translate PFNs to MFNs when setting _PAGE_PRESENT. His suggested fix converted p[te|md]_[set|clear]_flags to using paravirt-friendly ops but this is overkill. He suggested an alternative of using p[te|md]_modify in the NUMA page table operations but this is does more work than necessary and would require looking up a VMA for protections. This patch modifies the NUMA page table operations to use paravirt friendly operations to set/clear the flags of interest. Unfortunately this will take a performance hit when updating the PTEs on CONFIG_PARAVIRT but I do not see a way around it that does not break Xen. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18mips: export flush_icache_rangeKees Cook1-2/+2
The lkdtm module performs tests against executable memory ranges, so it needs to flush the icache for proper behaviors. Other architectures already export this, so do the same for MIPS. [akpm@linux-foundation.org: relocate export sites] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: John Crispin <blogic@openwrt.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()Mizuma, Masayoshi1-0/+1
soft lockup in freeing gigantic hugepage fixed in commit 55f67141a892 "mm: hugetlb: fix softlockup when a large number of hugepages are freed." can happen in return_unused_surplus_pages(), so let's fix it. Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18wait: explain the shadowing and type inconsistenciesPeter Zijlstra1-1/+13
Stick in a comment before someone else tries to fix the sparse warning this generates. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-o2ro6f3vkxklni0bc8f7m68s@git.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18Shiraz has movedViresh Kumar11-13/+14
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18Documentation/vm/numa_memory_policy.txt: fix wrong document in numa_memory_policy.txtTang Chen1-3/+2
In document numa_memory_policy.txt, the following examples for flag MPOL_F_RELATIVE_NODES are incorrect. For example, consider a task that is attached to a cpuset with mems 2-5 that sets an Interleave policy over the same set with MPOL_F_RELATIVE_NODES. If the cpuset's mems change to 3-7, the interleave now occurs over nodes 3,5-6. If the cpuset's mems then change to 0,2-3,5, then the interleave occurs over nodes 0,3,5. According to the comment of the patch adding flag MPOL_F_RELATIVE_NODES, the nodemasks the user specifies should be considered relative to the current task's mems_allowed. (https://lkml.org/lkml/2008/2/29/428) And according to numa_memory_policy.txt, if the user's nodemask includes nodes that are outside the range of the new set of allowed nodes, then the remap wraps around to the beginning of the nodemask and, if not already set, sets the node in the mempolicy nodemask. So in the example, if the user specifies 2-5, for a task whose mems_allowed is 3-7, the nodemasks should be remapped the third, fourth, fifth, sixth node in mems_allowed. like the following: mems_allowed: 3 4 5 6 7 relative index: 0 1 2 3 4 5 So the nodemasks should be remapped to 3,5-7, but not 3,5-6. And for a task whose mems_allowed is 0,2-3,5, the nodemasks should be remapped to 0,2-3,5, but not 0,3,5. mems_allowed: 0 2 3 5 relative index: 0 1 2 3 4 5 Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18powerpc/mm: fix ".__node_distance" undefinedMike Qiu1-0/+1
CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h ... Building modules, stage 2. WARNING: 1 bad relocations c0000000013d6a30 R_PPC64_ADDR64 uprobes_fetch_type_table WRAP arch/powerpc/boot/zImage.pseries WRAP arch/powerpc/boot/zImage.epapr MODPOST 1849 modules ERROR: ".__node_distance" [drivers/block/nvme.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 make: *** Waiting for unfinished jobs.... The reason is symbol "__node_distance" not been exported in powerpc. Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Alistair Popple <alistair@popple.id.au> Cc: Mike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18kernel/watchdog.c:touch_softlockup_watchdog(): use raw_cpu_write()Andrew Morton1-1/+5
Fix: BUG: using __this_cpu_write() in preemptible [00000000] code: systemd-udevd/497 caller is __this_cpu_preempt_check+0x13/0x20 CPU: 3 PID: 497 Comm: systemd-udevd Tainted: G W 3.15.0-rc1 #9 Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 Call Trace: check_preemption_disabled+0xe1/0xf0 __this_cpu_preempt_check+0x13/0x20 touch_nmi_watchdog+0x28/0x40 Reported-by: Luis Henriques <luis.henriques@canonical.com> Tested-by: Luis Henriques <luis.henriques@canonical.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18init/Kconfig: move the trusted keyring config option to general setupPeter Foley1-12/+12
The SYSTEM_TRUSTED_KEYRING config option is not in any menu, causing it to show up in the toplevel of the kernel configuration. Fix this by moving it under the General Setup menu. Signed-off-by: Peter Foley <pefoley2@pefoley.com> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18vmscan: reclaim_clean_pages_from_list() must use mod_zone_page_state()Christoph Lameter1-1/+1
Seems to be called with preemption enabled. Therefore it must use mod_zone_page_state instead. Signed-off-by: Christoph Lameter <cl@linux.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tejun Heo <tj@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18net: sctp: cache auth_enable per endpointVlad Yasevich7-60/+92
Currently, it is possible to create an SCTP socket, then switch auth_enable via sysctl setting to 1 and crash the system on connect: Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.1-mipsgit-20140415 #1 task: ffffffff8056ce80 ti: ffffffff8055c000 task.ti: ffffffff8055c000 [...] Call Trace: [<ffffffff8043c4e8>] sctp_auth_asoc_set_default_hmac+0x68/0x80 [<ffffffff8042b300>] sctp_process_init+0x5e0/0x8a4 [<ffffffff8042188c>] sctp_sf_do_5_1B_init+0x234/0x34c [<ffffffff804228c8>] sctp_do_sm+0xb4/0x1e8 [<ffffffff80425a08>] sctp_endpoint_bh_rcv+0x1c4/0x214 [<ffffffff8043af68>] sctp_rcv+0x588/0x630 [<ffffffff8043e8e8>] sctp6_rcv+0x10/0x24 [<ffffffff803acb50>] ip6_input+0x2c0/0x440 [<ffffffff8030fc00>] __netif_receive_skb_core+0x4a8/0x564 [<ffffffff80310650>] process_backlog+0xb4/0x18c [<ffffffff80313cbc>] net_rx_action+0x12c/0x210 [<ffffffff80034254>] __do_softirq+0x17c/0x2ac [<ffffffff800345e0>] irq_exit+0x54/0xb0 [<ffffffff800075a4>] ret_from_irq+0x0/0x4 [<ffffffff800090ec>] rm7k_wait_irqoff+0x24/0x48 [<ffffffff8005e388>] cpu_startup_entry+0xc0/0x148 [<ffffffff805a88b0>] start_kernel+0x37c/0x398 Code: dd0900b8 000330f8 0126302d <dcc60000> 50c0fff1 0047182a a48306a0 03e00008 00000000 ---[ end trace b530b0551467f2fd ]--- Kernel panic - not syncing: Fatal exception in interrupt What happens while auth_enable=0 in that case is, that ep->auth_hmacs is initialized to NULL in sctp_auth_init_hmacs() when endpoint is being created. After that point, if an admin switches over to auth_enable=1, the machine can crash due to NULL pointer dereference during reception of an INIT chunk. When we enter sctp_process_init() via sctp_sf_do_5_1B_init() in order to respond to an INIT chunk, the INIT verification succeeds and while we walk and process all INIT params via sctp_process_param() we find that net->sctp.auth_enable is set, therefore do not fall through, but invoke sctp_auth_asoc_set_default_hmac() instead, and thus, dereference what we have set to NULL during endpoint initialization phase. The fix is to make auth_enable immutable by caching its value during endpoint initialization, so that its original value is being carried along until destruction. The bug seems to originate from the very first days. Fix in joint work with Daniel Borkmann. Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18tg3: update rx_jumbo_pending ring param only when jumbo frames are enabledIvan Vecera1-1/+3
The patch fixes a problem with dropped jumbo frames after usage of 'ethtool -G ... rx'. Scenario: 1. ip link set eth0 up 2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo 3. ip link set mtu 9000 dev eth0 The ethtool command set rx_jumbo_pending to zero so any received jumbo packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N' to workaround the issue. The patch changes the logic so rx_jumbo_pending value is changed only if jumbo frames are enabled (MTU > 1500). Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18vlan: Fix lockdep warning when vlan dev handle notificationdingtianhong2-5/+42
When I open the LOCKDEP config and run these steps: modprobe 8021q vconfig add eth2 20 vconfig add eth2.20 30 ifconfig eth2 xx.xx.xx.xx then the Call Trace happened: [32524.386288] ============================================= [32524.386293] [ INFO: possible recursive locking detected ] [32524.386298] 3.14.0-rc2-0.7-default+ #35 Tainted: G O [32524.386302] --------------------------------------------- [32524.386306] ifconfig/3103 is trying to acquire lock: [32524.386310] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386326] [32524.386326] but task is already holding lock: [32524.386330] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386341] [32524.386341] other info that might help us debug this: [32524.386345] Possible unsafe locking scenario: [32524.386345] [32524.386350] CPU0 [32524.386352] ---- [32524.386354] lock(&vlan_netdev_addr_lock_key/1); [32524.386359] lock(&vlan_netdev_addr_lock_key/1); [32524.386364] [32524.386364] *** DEADLOCK *** [32524.386364] [32524.386368] May be due to missing lock nesting notation [32524.386368] [32524.386373] 2 locks held by ifconfig/3103: [32524.386376] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81431d42>] rtnl_lock+0x12/0x20 [32524.386387] #1: (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386398] [32524.386398] stack backtrace: [32524.386403] CPU: 1 PID: 3103 Comm: ifconfig Tainted: G O 3.14.0-rc2-0.7-default+ #35 [32524.386409] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [32524.386414] ffffffff81ffae40 ffff8800d9625ae8 ffffffff814f68a2 ffff8800d9625bc8 [32524.386421] ffffffff810a35fb ffff8800d8a8d9d0 00000000d9625b28 ffff8800d8a8e5d0 [32524.386428] 000003cc00000000 0000000000000002 ffff8800d8a8e5f8 0000000000000000 [32524.386435] Call Trace: [32524.386441] [<ffffffff814f68a2>] dump_stack+0x6a/0x78 [32524.386448] [<ffffffff810a35fb>] __lock_acquire+0x7ab/0x1940 [32524.386454] [<ffffffff810a323a>] ? __lock_acquire+0x3ea/0x1940 [32524.386459] [<ffffffff810a4874>] lock_acquire+0xe4/0x110 [32524.386464] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386471] [<ffffffff814fc07a>] _raw_spin_lock_nested+0x2a/0x40 [32524.386476] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386481] [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386489] [<ffffffffa0500cab>] vlan_dev_set_rx_mode+0x2b/0x50 [8021q] [32524.386495] [<ffffffff8141addf>] __dev_set_rx_mode+0x5f/0xb0 [32524.386500] [<ffffffff8141af8b>] dev_set_rx_mode+0x2b/0x40 [32524.386506] [<ffffffff8141b3cf>] __dev_open+0xef/0x150 [32524.386511] [<ffffffff8141b177>] __dev_change_flags+0xa7/0x190 [32524.386516] [<ffffffff8141b292>] dev_change_flags+0x32/0x80 [32524.386524] [<ffffffff8149ca56>] devinet_ioctl+0x7d6/0x830 [32524.386532] [<ffffffff81437b0b>] ? dev_ioctl+0x34b/0x660 [32524.386540] [<ffffffff814a05b0>] inet_ioctl+0x80/0xa0 [32524.386550] [<ffffffff8140199d>] sock_do_ioctl+0x2d/0x60 [32524.386558] [<ffffffff81401a52>] sock_ioctl+0x82/0x2a0 [32524.386568] [<ffffffff811a7123>] do_vfs_ioctl+0x93/0x590 [32524.386578] [<ffffffff811b2705>] ? rcu_read_lock_held+0x45/0x50 [32524.386586] [<ffffffff811b39e5>] ? __fget_light+0x105/0x110 [32524.386594] [<ffffffff811a76b1>] SyS_ioctl+0x91/0xb0 [32524.386604] [<ffffffff815057e2>] system_call_fastpath+0x16/0x1b ======================================================================== The reason is that all of the addr_lock_key for vlan dev have the same class, so if we change the status for vlan dev, the vlan dev and its real dev will hold the same class of addr_lock_key together, so the warning happened. we should distinguish the lock depth for vlan dev and its real dev. v1->v2: Convert the vlan_netdev_addr_lock_key to an array of eight elements, which could support to add 8 vlan id on a same vlan dev, I think it is enough for current scene, because a netdev's name is limited to IFNAMSIZ which could not hold 8 vlan id, and the vlan dev would not meet the same class key with its real dev. The new function vlan_dev_get_lockdep_subkey() will return the subkey and make the vlan dev could get a suitable class key. v2->v3: According David's suggestion, I use the subclass to distinguish the lock key for vlan dev and its real dev, but it make no sense, because the difference for subclass in the lock_class_key doesn't mean that the difference class for lock_key, so I use lock_depth to distinguish the different depth for every vlan dev, the same depth of the vlan dev could have the same lock_class_key, I import the MAX_LOCK_DEPTH from the include/linux/sched.h, I think it is enough here, the lockdep should never exceed that value. v3->v4: Add a huge array of locking keys will waste static kernel memory and is not a appropriate method, we could use _nested() variants to fix the problem, calculate the depth for every vlan dev, and use the depth as the subclass for addr_lock_key. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18ARC: Delete stale barrier.hVineet Gupta1-37/+0
Commit 93ea02bb8435 ("arch: Clean up asm/barrier.h implementations") wired generic barrier.h for ARC, but failed to delete the existing file. In 3.15, due to rcupdate.h updates, this causes a build breakage on ARC: CC arch/arc/kernel/asm-offsets.s In file included from include/linux/sched.h:45:0, from arch/arc/kernel/asm-offsets.c:9: include/linux/rculist.h: In function __list_add_rcu: include/linux/rculist.h:54:2: error: implicit declaration of function smp_store_release [-Werror=implicit-function-declaration] rcu_assign_pointer(list_next_rcu(prev), new); ^ Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.