aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/gpio (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-21dt-bindings: gpio: Add bindings for Cadence GPIOJan Kotas1-0/+43
This patch adds a DT binding documentation for Cadence GPIO controller. Signed-off-by: Jan Kotas <jank@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> [Removed interrupt-parent] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-17dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) supportFabrizio Castro1-0/+1
Document Renesas' RZ/G2E (R8A774C0) GPIO blocks compatibility within the relevant dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-07dt-bindings: gpio: lpc18xx: describe interrupt controllers of GPIO controllerVladimir Zapolskiy1-9/+29
From LPC18xx and LPC43xx User Manuals the GPIO controller consists of the following weakly connected blocks: * GPIO pin interrupt block at 0x40087000, * GPIO GROUP0 interrupt block at 0x40088000, * GPIO GROUP1 interrupt block at 0x40089000, * GPIO port block at 0x400F4000. While all 4 sub-controller blocks have their own I/O addresses, moreover all 3 interrupt blocks are APB0 peripherals and high-speed GPIO block is an AHB slave, according to the hardware manual interrupt controllers and GPIO controller block are seen as a single device, all 4 sub-controllers have the shared reset signal RGU #28 and the same shared clock to access registers CLK_Mx_GPIO on CCU1. The change adds descriptions of the currently missing interrupt controller blocks found on GPIO controller, new added properties are 'reg-names', 'resets', 'interrupt-controller' and '#interrupt-cells', also the example is updated to reflect the changes in device tree binding description. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-26gpio: dwapb: Correct the DT node name in the examplePhil Edworthy1-2/+2
The sub-nodes should not be called gpio-controller, but simply gpio. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-05dt-bindings: gpio: vf610: add optional clocks propertyA.s. Dong1-0/+6
On some SoCs(e.g. MX7ULP), GPIO clock is gatable and maybe disabled by default. Users have to make sure it's enabled before being able to access controller registers, otherwise an external abort error may occur. Let's add the optional clocks property to handle this case. For ULP GPIO clock, it includes two separate clocks: one is for GPIO controller Input/Output function clock while another is GPIO port control clock for interrupt function. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stefan Agner <stefan@agner.ch> Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10dt-bindings: Document the Synopsys GPIO via CREG bindingsEugeniy Paltsev1-0/+21
This patch adds documentation of device tree bindings for the Synopsys GPIO via CREG driver. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25dt-bindings: gpio: rcar: Add r8a7744 (RZ/G1N) supportBiju Das1-0/+1
Renesas RZ/G1N (R8A7744) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20gpio: OF: Remove bad practice examplesLinus Walleij1-15/+9
We remove the references to anything but two-cell GPIO specifiers and just mention that controllers need to specify their bindings and that we strongly recommend two-cell bindings. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20gpio: OF: Cut painful BNF experiments from bindingsLinus Walleij1-50/+64
In 2011 the commit bf859f84a19f ("gpio/dt: Refine GPIO device tree binding") introduced an experimental BNF notation for defining a regular grammar for the GPIO phandles used by different devices. This was an interesting approach, and shows that we have long nutured the idea to formally verify device tree files using regular grammar. Most if not all other bindings use natural language to define the bindings, and the recent thinking for verifying device tree files is to use JSON schemas in separate definitions. Cut the BNF business and replace it with natural language so that it becomes more human-readable for now. Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kumar Gala <galak@kernel.crashing.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-11gpio: of: make example syntactically correctWolfram Sang1-4/+4
The ';' was missing. And cosmetic: there was a space too much. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29Merge branch 'ib-ingenic' of ../linux-pinctrl into develLinus Walleij1-46/+0
2018-08-29dt-bindings: gpio: rcar: Add r8a774a1 (RZ/G2M) supportFabrizio Castro1-1/+2
Document Renesas' RZ/G2M (R8A774A1) GPIO blocks compatibility within the relevant dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29dt-bindings: pinctrl: Update pinctrl-ingenic for JZ4725B and GPIO mergePaul Cercueil1-46/+0
The pinctrl-ingenic driver now supports the JZ4725B SoC. Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic driver is now responsible for providing the GPIO functionality. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29dt-bindings: gpio: rcar: Add gpio-reserved-ranges supportBiju Das1-26/+35
Update the DT bindings documentation with the optional gpio-reserved-ranges properties. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-15Merge tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds5-0/+75
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.19 kernel cycle. I don't know if anything in particular stands out. Maybe the Aspeed coprocessor thing from Benji: Aspeed is doing baseboard management chips (BMC's) for servers etc. These Aspeed's are ARM processors that exist inside (I guess) Intel servers, and they are moving forward to using mainline Linux in those. This is one of the pieces of the puzzle to achive that. They are doing OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/ Summary: Core changes: - Add a new API for explicitly naming GPIO consumers, when needed. - Don't let userspace set values on input lines. While we do not think anyone would do this crazy thing we better plug the hole before someone uses it and think it's a nifty feature. - Avoid calling chip->request() for unused GPIOs. New drivers/subdrivers: - The Mediatek MT7621 is supported which is a big win for OpenWRT and similar router distributions using this chip, as it seems every major router manufacturer on the planet has made products using this chip: https://wikidevi.com/wiki/MediaTek_MT7621 - The Tegra 194 is now supported. - The IT87 driver now supports IT8786E and IT8718F super-IO chips. - Add support for Rockchip RK3328 in the syscon GPIO driver. Driver changes: - Handle the get/set_multiple() properly on MMIO chips with inverted direction registers. We didn't have this problem until a new chip appear that has get/set registers AND inverted direction bits, OK now we handle it. - A patch series making more error codes percolate upward properly for different errors on gpiochip_lock_as_irq(). - Get/set multiple for the OMAP driver, accelerating these multiple line operations if possible. - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO lines need to be grabbed by a co-processor for doing automated tasks, sometimes they are available as GPIO lines. By adding an explicit API in this driver we make it possible for the two line consumers to coexist. (This work was made available on the ib-aspeed branch, which may be appearing in other pull requests.) - Implemented .get_direction() and open drain in the SCH311x driver. - Continuing cleanup of included headers in GPIO drivers" * tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: it87: Add support for IT8613 gpio: it87: add support for IT8718F Super I/O. gpiolib: Avoid calling chip->request() for unused gpios gpio: tegra: Include the right header gpio: mmio: Fix up inverted direction registers gpio: xilinx: Use the right include gpio: timberdale: Include the right header gpio: tb10x: Use the right include gpiolib: Fix of_node inconsistency gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error gpio: uniphier: Bail out on gpiochip_lock_as_irq() error gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq() gpio: em: Don't shadow error code of gpiochip_lock_as_irq() gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq() gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq() gpiolib: Don't shadow error code of gpiochip_lock_as_irq() gpio: syscon: rockchip: add GRF GPIO support for rk3328 gpio: omap: Add get/set_multiple() callbacks gpio: pxa: remove set but not used variable 'gpio_offset' gpio-it87: add support for IT8786E Super I/O ...
2018-08-14Merge tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds18-22/+3
Pull Devicetree updates from Rob Herring: - Remove an obsolete hack for PPC32 longtrail systems - Make of_io_request_and_map() "name" arg optional - Add vendor prefixes for bitmain, Asus, and Y Soft - Remove 'interrupt-parent' from bindings as it is implicit - New properties for wm8994 audio codec - Add 'clocks' property support to SRAM binding - Add binding for ASPEED coprocessor interrupt controller - Various binding spelling and link fixes * tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Documentation: remove dynamic-resolution-notes reference to non-existent file dt-bindings: Add Y Soft Corporation vendor prefix of/fdt: Remove PPC32 longtrail hack in memory scan dt-bindings: remove 'interrupt-parent' from bindings pinctrl: tegra: fix spelling in devicetree binding document usb: dwc3: rockchip: Fix PHY documentation links. dt-bindings: sound: wm8994: document wlf,csnaddr-pd property dt-bindings: sound: wm8994: document wlf,spkmode-pu property dt-bindings: sram: Add 'clocks' as an optional property dt-bindings: Add vendor prefix for AsusTek Computer Inc. dt-bindings: misc: ASPEED coprocessor interrupt controller dt-bindings: gpio: pca953x: Document interrupts, update example drivers/of: Make of_io_request_and_map() "name" argument optional dt-bindings: Add bitmain vendor prefix Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"
2018-08-06gpio: syscon: rockchip: add GRF GPIO support for rk3328Levin Du1-0/+32
In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute control, can also be used for general purpose. It is manipulated by the GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can also be set in the same way. Currently this GRF GPIO controller only supports the mute pin. If needed in the future, the HDMI pins support can also be added. Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-25dt-bindings: remove 'interrupt-parent' from bindingsRob Herring17-22/+0
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-10dt-bindings: gpio: pca953x: Document interrupts, update exampleGeert Uytterhoeven1-0/+3
The device can optionally supply an interrupt, hence document that. Add required GPIO properties to the example (extracted from a patch by Wolfram Sang). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-09gpio: mxc: Add clocks optional binding for imx gpioAnson Huang1-0/+3
Some i.MX SoCs have GPIO clock gate in CCM, accessing GPIO registers needs to enable GPIO clock gate first, i.MX GPIO driver will enable clock gate if there is clock property in GPIO node of dtb, add optional property to i.MX GPIO binding doc. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09gpio: mt7621: Add DT bindingsSergio Paracuellos1-0/+35
Add a devicetree binding documentation for the mt7621 gpio. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-02dt-bindings: tegra186-gpio: Add information for Tegra194Mikko Perttunen1-0/+4
The Tegra194 GPIO controller is similar to the one in Tegra186. Add relevant information to the device tree binding documentation. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-26dt-bindings: Fix unbalanced quotation marksJonathan Neuschäfer1-1/+1
Multiple binding documents have various forms of unbalanced quotation marks. Fix them. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-06-18gpio-rcar: document R8A77980 bindingsSergei Shtylyov1-0/+1
Renesas R-Car V3H (R8A77980) SoC also has the R-Car gen3 compatible GPIO controllers, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: rcar: Add DT binding for r8a77990Yoshihiro Shimoda1-0/+1
Add compatible string for R-Car E3 (r8a77990) in gpio-rcar. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16pca953x: add example how to use interrupt-controller and gpio-controllerH. Nikolaus Schaller1-0/+33
It is not completely obvious that these are required and how to use them. So we provide a tested example. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16DTS: Bindings: pca953x add an optional vcc-supply propertyH. Nikolaus Schaller1-0/+1
Hardware can have a switchable Vcc supply, so let's add it to the bindings (the current Linux driver code already supports it). Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: dwapb: Add support for 1 interrupt per port A GPIOPhil Edworthy1-2/+7
The DesignWare GPIO IP can be configured for either 1 interrupt or 1 per GPIO in port A, but the driver currently only supports 1 interrupt. See the DesignWare DW_apb_gpio Databook description of the 'GPIO_INTR_IO' parameter. This change allows the driver to work with up to 32 interrupts, it will get as many interrupts as specified in the DT 'interrupts' property. It doesn't do anything clever with the different interrupts, it just calls the same handler used for single interrupt hardware. ACPI companion code provided by Hoan Tran <hotran@apm.com>. This was tested on X-Gene by Hoan. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Hoan Tran <hotran@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16dt-bindings: gpio: Add support for r8a77965Jacopo Mondi1-0/+1
Add compatible string for R-Car M3-N (r8a77965) in gpio-rcar. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16dt-bindings: gpio: rcar: Add r8a77470 (RZ/G1C) supportBiju Das1-0/+1
Renesas RZ/G1C (R8A77470) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-05Merge tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds8-136/+188
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.17 kernel cycle: New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes" * tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: Add Spreadtrum PMIC EIC driver support gpio: Add Spreadtrum EIC driver support dt-bindings: gpio: Add Spreadtrum EIC controller documentation gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe() pinctrl: qcom: Don't allow protected pins to be requested gpiolib: Support 'gpio-reserved-ranges' property gpiolib: Change bitmap allocation to kmalloc_array gpiolib: Extract mask allocation into subroutine dt-bindings: gpio: Add a gpio-reserved-ranges property gpio: mockup: fix a potential crash when creating debugfs entries gpio: pca953x: add compatibility for pcal6524 and pcal9555a gpio: dwapb: Add support for a bus clock gpio: Remove VLA from xra1403 driver gpio: Remove VLA from MAX3191X driver gpio: ws16c48: Implement get_multiple callback gpio: gpio-mm: Implement get_multiple callback gpio: 104-idi-48: Implement get_multiple callback gpio: 104-dio-48e: Implement get_multiple callback gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks gpio: pci-idio-16: Implement get_multiple callback ...
2018-03-27dt-bindings: gpio: Add Spreadtrum EIC controller documentationBaolin Wang1-0/+97
This patch adds the device tree bindings for the Spreadtrum EIC controller. The EIC can be seen as a special type of GPIO, which can only be used as input mode. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27Merge branch 'gpio-reserved-ranges' into develLinus Walleij1-3/+4
2018-03-27dt-bindings: gpio: Add a gpio-reserved-ranges propertyStephen Boyd1-3/+4
Some qcom platforms make some GPIOs or pins unavailable for use by non-secure operating systems, and thus reading or writing the registers for those pins will cause access control issues. Introduce a DT property to describe the set of GPIOs that are available for use so that higher level OSes are able to know what pins to avoid reading/writing. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27gpio: pca953x: add compatibility for pcal6524 and pcal9555aH. Nikolaus Schaller1-0/+2
The Pyra-Handheld originally used the tca6424 but recently we have replaced it by the pin and package compatible pcal6524. So let's add this to the bindings and the driver. And while we are at it, the pcal9555a does not have a compatible entry either but is already supported by the device id table. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-26gpio: remove etraxfs driverArnd Bergmann1-22/+0
The cris architecture is getting removed, so we no longer need the etraxfs driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-02dt-bindings: gpio: Add Spreadtrum GPIO controller documentationBaolin Wang1-0/+28
This patch adds the device tree bindings for the Spreadtrum GPIO controller. The gpios will be supported by the GPIO generic library. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-01gpio: Drop TZ1090 driversJames Hogan2-133/+0
Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 GPIO drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22dt-bindings: gpio: add raspberry pi GPIO expander bindingBaruch Siach1-0/+30
The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware over I2C. The firmware mailbox interface allows the ARM core to control the GPIO lines. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-12dt-bindings: gpio: Add binding for Wii GPIO controllerJonathan Neuschäfer1-0/+27
The Nintendo Wii game console has a GPIO controller, which is used for the optical disk slot LED, buttons, poweroff, etc. This patch adds a binding for this GPIO controller. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-01Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds3-3/+3
Pull DeviceTree updates from Rob Herring: - Convert to use memblock_virt_alloc in DT code which supports bootmem arches. With this we can remove the arch specific early_init_dt_alloc_memory_arch() functions. - Enable running the DT unittests on UML - Use SPDX license tags on DT files - Fix early FDT kconfig ifdef logic - Clean-up unittest Makefile - Fix function comment for of_irq_parse_raw - Add missing documentation for linux,initrd-{start,end} properties - Clean-up of binding examples using uppercase hex - Add trivial devices W83773G and Infineon TLV493D-A1B6 - Add missing STM32 SoC bindings - Various small binding doc fixes * tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits) xtensa: remove arch specific early DT functions x86: remove arch specific early_init_dt_alloc_memory_arch nios2: remove arch specific early_init_dt_alloc_memory_arch mips: remove arch specific early_init_dt_alloc_memory_arch metag: remove arch specific early DT functions cris: remove arch specific early DT functions libfdt: remove unnecessary include directive from <linux/libfdt.h> of: unittest: refactor Makefile of/fdt: use memblock_virt_alloc for early alloc of: Use SPDX license tag for DT files of/fdt: Fix #ifdef dependency of early flattree declarations dt-bindings: h8300 clocksource: correct spelling of pulse dt-bindings: imx6q-pcie: Add required property for i.MX6SX mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding dt-bindings: Use lower case hex in unit-addresses dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 dt-bindings: Add Infineon TLV493D-A1B6 dt-bindings: mailbox: ti,message-manager: Fix interrupt name error dt-bindings: chosen: Document linux,initrd-{start,end} dt-bindings: arm: document supported STM32 SoC family ...
2018-01-31Merge tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds2-3/+48
Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...
2017-12-26dt-bindings: Use lower case hex in unit-addressesRob Herring3-3/+3
DT unit addresses should be lower case hex. Fix all the binding examples. Converted with the following command from Krzysztof Kozlowski: sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt') Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-21dt-bindings: gpio: rcar: Correct SoC family name for R8A7778Geert Uytterhoeven1-1/+1
R8A7778 is R-Car (not R-Mobile) M1. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-08Merge tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds1-1/+1
Pull DeviceTree fixes from Rob Herring: "Another set of DT fixes: - Fixes from overlay code rework. A trifecta of fixes to the locking, an out of bounds access, and a memory leak in of_overlay_apply() - Clean-up at25 eeprom binding document - Remove leading '0x' in unit-addresses from binding docs" * tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: overlay: Make node skipping in init_overlay_changeset() clearer of: overlay: Fix out-of-bounds write in init_overlay_changeset() of: overlay: Fix (un)locking in of_overlay_apply() of: overlay: Fix memory leak in of_overlay_apply() error path dt-bindings: eeprom: at25: Document device-specific compatible values dt-bindings: eeprom: at25: Grammar s/are can/can/ dt-bindings: Remove leading 0x from bindings notation of: overlay: Remove else after goto of: Spelling s/changset/changeset/ of: unittest: Remove bogus overlay mutex release from overlay_data_add()
2017-12-07pinctrl: axp209: add support for AXP813 GPIOsQuentin Schulz1-1/+12
The AXP813 has only two GPIOs. GPIO0 can either be used as a GPIO, an LDO regulator or an ADC. GPIO1 can be used either as a GPIO or an LDO regulator. Moreover, the status bit of the GPIOs when in input mode is not offset by 4 unlike the AXP209. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07dt-bindings: gpio: gpio-axp209: add pinctrl featuresQuentin Schulz1-1/+35
The X-Powers AXP209 has 3 GPIOs. GPIO0/1 can each act either as a GPIO, an ADC or a LDO regulator. GPIO2 can only act as a GPIO. This adds the pinctrl features to the driver so GPIO0/1 can be used as ADC or LDO regulator. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-06dt-bindings: Remove leading 0x from bindings notationMathieu Malaterre1-1/+1
Improve the binding example by removing all the leading 0x to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" Converted using the following command: find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} + This is a follow up to commit 48c926cd3414 Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-02gpio: pca953x: fix vendor prefix for PCA9654Sergei Shtylyov1-1/+1
Despite commit 55020c8056a8 ("of: Add vendor prefix for ON Semiconductor Corp.") was made long ago, the latter commit 9f49f6dd0473 ("gpio: pca953x: add onsemi,pca9654 id") made use of another, undocumented vendor prefix. Since such prefix doesn't seem to be used in any device trees, I think we can just fix the "compatible" string in the driver and the bindings and be done with that... Fixes: 9f49f6dd0473 ("gpio: pca953x: add onsemi,pca9654 id") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds1-83/+0
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.