aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/cpsw.txt (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-09-30net: cpsw: Add am33xx MACID readoutMarkus Pargmann1-0/+4
This patch adds a function to get the MACIDs from the am33xx SoC control module registers which hold unique vendor MACIDs. This is only used if of_get_mac_address() fails to get a valid mac address. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30DT doc: net: cpsw mac-address is optionalMarkus Pargmann1-1/+1
mac-address is an optional property. If no mac-address is set, a random mac-address will be generated. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18DT: net: document Ethernet bindings in one placeSergei Shtylyov1-3/+2
This patch is an attempt to gather the Ethernet related bindings in one file, like it's done in the MMC and some other subsystems. It should save some of the trouble of documenting several properties over and over in each binding document, instead only making reference to the main file. I have used the Embedded Power Architecture(TM) Platform Requirements (ePAPR) standard as a base for the properties description, also documenting some ad-hoc properties that have been introduced over time despite having direct analogs in ePAPR. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04drivers: net: ethernet: cpsw: add phy-mode support to cpsw driverMugunthan V N1-0/+6
Adding phy-mode support to cpsw driver and updating the cpsw binding documentation. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13drivers: net: ethernet: cpsw: change cpts_active_slave to active_slaveMugunthan V N1-3/+4
Change cpts_active_slave to active_slave so that the same DT property can be used to ethtool and SIOCGMIIPHY. CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13documentation: dt: bindings: cpsw: cleanup documentationMugunthan V N1-2/+7
Move all the slave note properties to separate section to reduce the confusion between slave note properties and cpsw node properties Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: cpsw: dual emac interface implementationMugunthan V N1-0/+2
The CPSW switch can act as Dual EMAC by segregating the switch ports using VLAN and port VLAN as per the TRM description in 14.3.2.10.2 Dual Mac Mode Following CPSW components will be common for both the interfaces. * Interrupt source is common for both eth interfaces * Interrupt pacing is common for both interfaces * Hardware statistics is common for all the ports * CPDMA is common for both eth interface * CPTS is common for both the interface and it should not be enabled on both the interface as timestamping information doesn't contain port information. Constrains * Reserved VID of One port should not be used in other interface which will enable switching functionality * Same VID must not be used in both the interface which will enable switching functionality Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14cpsw: simplify the setup of the register pointersRichard Cochran1-38/+4
Instead of having a host of different register offsets in the device tree, this patch simplifies the CPSW code by letting the driver set the proper register offsets automatically, based on the CPSW version. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01cpts: specify the input clock frequency via DTRichard Cochran1-0/+6
This patch adds a way to configure the CPTS input clock scaling factors via the device tree. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01cpsw: add a DT field for the active time stamping portRichard Cochran1-0/+3
Because time stamping on both external ports of the switch simultaneously is positively useless from the application's point of view, this patch provides a DT configuration method to choose the active port. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01cpsw: add a DT field for the cpts offsetRichard Cochran1-0/+3
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01cpsw: support both silicon versionsRichard Cochran1-4/+4
This patch fixes the cpsw driver to operate correctly with both the dm814x and the am335x versions of the switch hardware. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"David S. Miller1-3/+0
This reverts commit d7559982701ac500662b2e8e150ff34f7faf0281. It wasn't meant to be applied, commit 342b7b741d76bc8aadeff844634348bb2a343d19 ("net: ti cpsw ethernet: set IFCTL_A bit in MACCONTROL") was redone in such a way to make this commit unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01net: ti cpsw ethernet: allow reading phy interface mode from DTDaniel Mack1-0/+3
Allow users to specify the phy interface of the CPSW slaves. The new node parameter is called "phy_if_mode" and is optional. The original behaviour of the driver is preserved when not given. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-07documentation: dt: bindings: cpsw: fixing the examples for directly using it in dts fileMugunthan V N1-48/+53
Fixing the cpsw device tree example to make it simpler to copy pastable to dts file and use it directly. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03drivers: net: ethernet: cpsw: Add device tree support to CPSWMugunthan V N1-0/+104
This patch adds device tree support for cpsw driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.