| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 'reg' property is missing from the mediatek,mt7530 schema which
results in the following warning once 'unevaluatedProperties' is fixed:
Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.example.dtb: switch@0: Unevaluated properties are not allowed ('reg' was unexpected)
Fixes: e0dda3119741 ("dt-bindings: net: dsa: convert binding for mediatek switches")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220701222240.1706272-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Describe the switch interrupts (dlr, switch, prp, hub, pattern) which
are connected to the GIC.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation in .yaml format and updates to the MAINTAINERS
Also 'make dt_binding_check' is passed.
RGMII internal delay values for the mac is retrieved from
rx-internal-delay-ps & tx-internal-delay-ps as per the feedback from
v3 patch series.
https://lore.kernel.org/netdev/20210802121550.gqgbipqdvp5x76ii@skbuf/
It supports only the delay value of 0ns and 2ns.
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
*-internal-delay-ps properties would be applicable only for RGMII interface
modes.
It is changed as per the request.
Ran dt_binding_check to confirm nothing is broken.
link: https://lore.kernel.org/netdev/d8e5f6a8-a7e1-dabd-f4b4-ea8ea21d0a1d@gmail.com/
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable led-mode configuration for LAN8814 phy
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This MII converter can be found on the RZ/N1 processor family. The MII
converter ports are declared as subnodes which are then referenced by
users of the PCS driver such as the switch.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220624144001.95518-5-clement.leger@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add description for new properties which will be parsed in driver.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add binding document for Ethernet on MT8365.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mails to Charles get an auto reply, that he is no longer working at
Eff'Innov technologies. Remove the entry.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220628070959.187734-1-michael@walle.cc
|
|
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-06-25
this is a pull request of 22 patches for net-next/master.
The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.
The next patch is by me and fixes a typo in the m_can driver.
Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.
The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.
Max Staudt's patch fixes a reference in the networking/can.rst
documentation.
Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.
Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.
Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.
The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add "renesas,rzn1-gmac" and "renesas,r9a06g032-gmac" compatible strings.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the stmmac driver already uses pm_runtime*() functions, describe
"power-domains" property in the binding.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add bindings for Renesas RZ/N1 Advanced 5 port switch. This switch is
present on Renesas RZ/N1 SoC and was probably provided by MoreThanIP.
This company does not exists anymore and has been bought by Synopsys.
Since this IP can't be find anymore in the Synospsy portfolio, lets use
Renesas as the vendor compatible for this IP.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This MII converter can be found on the RZ/N1 processor family. The MII
converter ports are declared as subnodes which are then referenced by
users of the PCS driver such as the switch.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a board where measurements indicate that the current three
options - leaving IO_IMPEDANCE_CTRL at the reset value (which is
factory calibrated to a value corresponding to approximately 50 ohms)
or using one of the two boolean properties to set it to the min/max
value - are too coarse.
There is no fixed mapping from register values to values in the range
35-70 ohms; it varies from chip to chip, and even that target range is
approximate. So add a DT binding for an nvmem cell which can be
populated during production with a value suitable for each specific
board.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
My codeaurora.org email doesn't work anymore, so switch to my preferred
kernel.org address.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220610133640.10810-2-kvalo@kernel.org
|
|
Toke now maintains ath9k so update DT bindings as well.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220610133640.10810-1-kvalo@kernel.org
|
|
Add basic description for the xilinx emaclite driver DT bindings.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A board may have no independent reset-line, so reset cannot be used
inside switch driver.
E.g. on Bananapi-R2 Pro switch and gmac are connected to same reset-line.
Resets should be acquired only to 1 device/driver. This prevents reset to
be bound to switch-driver if reset is already used for gmac. If reset is
only used by switch driver it resets the switch *and* the gmac after the
mdio bus comes up resulting in mdio bus goes down. It takes some time
until all is up again, switch driver tries to read from mdio, will fail
and defer the probe. On next try the reset does the same again.
Make reset optional for such boards.
Allow port 5 as cpu-port and phy-mode rgmii for mt7531.
- MT7530 supports RGMII on port 5 and RGMII/TRGMII on port 6.
- MT7531 supports on port 5 RGMII and SGMII (dual-sgmii) and
SGMII on port 6.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert txt binding to yaml binding for Mediatek switches.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a binding for the CAN controller on PolarFire SoC (MPFS).
A data sheet and a register map can be downloaded at:
| https://www.microsemi.com/document-portal/doc_download/1245725-polarfire-soc-fpga-mss-technical-reference-manual
| https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map
An alternative location for the register map is:
| http://web.archive.org/web/20220403030214/https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map
Link: https://lore.kernel.org/all/20220607065459.2035746-2-conor.dooley@microchip.com
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[mkl: add link to data sheet and register map]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Pull devicetree fixes from Rob Herring:
- Fixes for unevaluatedProperties warnings.
These were missed to due to a bug in dtschema which is now fixed. The
changes involve either adding missing properties or removing spurious
properties from examples.
- Update several Qualcomm binding maintainer email addresses
- Fix typo in imx8mp-media-blk-ctrl example
- Fix fixed string pattern in qcom,smd
- Correct the order of 'reg' entries in Xilinx PCI binding
* tag 'devicetree-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mtd: spi-nand: Add spi-peripheral-props.yaml reference
dt-bindings: memory-controllers: ingenic: Split out child node properties
dt-bindings: net/dsa: Add spi-peripheral-props.yaml references
dt-bindings: PCI: apple: Add missing 'power-domains' property
dt-bindings: Update Sibi Sankar's email address
dt-bindings: clock: Update my email address
dt-bindings: PCI: xilinx-cpm: Fix reg property order
dt-bindings: net: Fix unevaluatedProperties warnings in examples
dt-bindings: PCI: socionext,uniphier-pcie: Add missing child interrupt controller
dt-bindings: usb: snps,dwc3: Add missing 'dma-coherent' property
dt-bindings: soc: imx8mp-media-blk-ctrl: Fix DT example
dt-bindings: soc: qcom,smd: do not use pattern for simple rpm-requests string
|
|
SPI peripheral device bindings need to reference spi-peripheral-props.yaml
in order to use various SPI controller specific properties. Otherwise,
the unevaluatedProperties check will reject any controller specific
properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220531220122.2412711-1-robh@kernel.org
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck in
lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"
* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
net/af_packet: make sure to pull mac header
net: add debug info to __skb_pull()
net: CONFIG_DEBUG_NET depends on CONFIG_NET
stmmac: intel: Add RPL-P PCI ID
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
tipc: check attribute length for bearer name
ice: fix access-beyond-end in the switch code
nfp: remove padding in nfp_nfdk_tx_desc
ax25: Fix ax25 session cleanup problems
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
sfc/siena: fix considering that all channels have TX queues
socket: Don't use u8 type in uapi socket.h
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
net: ping6: Fix ping -6 with interface name
macsec: fix UAF bug for real_dev
octeontx2-af: fix error code in is_valid_offset()
wifi: mac80211: fix use-after-free in chanctx code
bonding: guard ns_targets by CONFIG_IPV6
tcp: tcp_rtx_synack() can be called from process context
...
|
|
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples. Fix the warnings by removing
spurious properties or adding missing properties to the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220526014149.2872762-1-robh@kernel.org
|
|
Update the dt-bindings maintainers section.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220526141318.77146-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
|
|
"make dt_binding_check":
Documentation/devicetree/bindings/net/adi,adin.yaml:40:77: [error] syntax error: mapping values are not allowed here (syntax)
The first line of the description ends with a colon, hence the block
needs to be marked with a "|".
Fixes: 1f77204e11f8b9e5 ("dt-bindings: net: adin: document phy clock output properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/6fcef2665a6cd86a021509a84c5956ec2efd93ed.1653401420.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
Microchip/SMSC LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use
platform_get_irq() and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls"
* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
of/irq: fix typo in comment
dt-bindings: Fix properties without any type
Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
dt-bindings: timer: cdns,ttc: drop unneeded minItems
dt-bindings: mailbox: zynqmp_ipi: convert to yaml
dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
dt-bindings: net: add schema for ASIX USB Ethernet controllers
of/fdt: Ignore disabled memory nodes
dt-bindings: arm: fix typos in compatible
dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
dt-bindings: display: convert Arm Komeda to DT schema
dt-bindings: display: convert Arm Mali-DP to DT schema
dt-bindings: display: convert Arm HDLCD to DT schema
dt-bindings: display: convert PL110/PL111 to DT schema
dt-bindings: arm: convert vexpress-config to DT schema
dt-bindings: arm: convert vexpress-sysregs to DT schema
...
|
|
Now that the schema tools can extract type information for all
properties (in order to decode dtb files), finding properties missing
any type definition is fairly trivial though not yet automated.
Fix the various property schemas which are missing a type. Most of these
tend to be device specific properties which don't have a vendor prefix.
A vendor prefix is how we normally ensure a type is defined.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for everything in .../bindings/display/
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220519211411.2200720-1-robh@kernel.org
|
|
The clock for this driver switched to the common clock controller driver.
Therefore, update common clock properties for ethernet device in the binding
document.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce dts bindings for mt7986 soc in mediatek,net.yaml.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add DT properties to configure both pins.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. However SyncE should be configured dynamically at
runtime, so it is explicitly omitted in this binding.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the binding was converted it appeared necessary to set
'unevaluatedProperties: true' because of the switch devices on the
turris-mox board. Actually the error was because of the reg property
being incorrect causing the rest of the properties to be unevaluated.
After the reg properties are fixed for turris-mox we can set
'unevaluatedProperties: false' as is generally expected.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create initial schema for Microchip/SMSC LAN95xx USB Ethernet controllers and
import some of currently supported USB IDs form drivers/net/usb/smsc95xx.c
These devices are already used in some of DTs. So, this schema makes it official.
NOTE: there was no previously documented txt based DT binding for this
controllers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517111505.929722-3-o.rempel@pengutronix.de
|
|
Create schema for ASIX USB Ethernet controllers and import some of
currently supported USB IDs form drivers/net/usb/asix_devices.c
These devices are already used in some of DTs. So, this schema makes it official.
NOTE: there was no previously documented txt based DT binding for this
controllers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517111505.929722-2-o.rempel@pengutronix.de
|
|
Since commit
| 1f9234401ce0 ("dt-bindings: can: add can-controller.yaml")
there is a common CAN controller binding. Add this to the ctucanfd
binding.
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The Renesas R-Car CAN FD Controller always uses two or more interrupts.
Make the interrupt-names properties a required property, to make it
easier to identify the individual interrupts.
Update the example accordingly.
Link: https://lore.kernel.org/all/a68e65955e0df4db60233d468f348203c2e7b940.1651512451.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Document the Ethernet AVB IP found on RZ/V2M SoC.
It includes the Ethernet controller (E-MAC) and Dedicated Direct memory
access controller (DMAC) for transferring transmitted Ethernet frames
to and received Ethernet frames from respective storage areas in the
RAM at high speed.
The AVB-DMAC is compliant with IEEE 802.1BA, IEEE 802.1AS timing and
synchronization protocol, IEEE 802.1Qav real-time transfer, and the
IEEE 802.1Qat stream reservation protocol.
R-Car has a pair of combined interrupt lines:
ch22 = Line0_DiA | Line1_A | Line2_A
ch23 = Line0_DiB | Line1_B | Line2_B
Line0 for descriptor interrupts (which we call dia and dib).
Line1 for error related interrupts (which we call err_a and err_b).
Line2 for management and gPTP related interrupts (mgmt_a and mgmt_b).
RZ/V2M hardware has separate interrupt lines for each of these.
It has 3 clocks; the main AXI clock, the AMBA CHI (Coherent Hub
Interface) clock and a gPTP reference clock.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No conflicts.
Build issue in drivers/net/ethernet/sfc/ptp.c
54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static")
49e6123c65da ("net: sfc: fix memory leak due to ptp channel")
https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the marvell,orion-mdio binding to JSON schema.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220505210621.3637268-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bindings documentation for Sunplus SP7021 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pick up new meta-schema fixes.
|
|
Pull devicetree fixes from Rob Herring:
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
|
|
In commit 4fdabd509df3 ("dt-bindings: net: lan966x: remove PHY reset")
the PHY reset was removed, but I failed to remove it from the example.
Fix it.
Fixes: 4fdabd509df3 ("dt-bindings: net: lan966x: remove PHY reset")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220503132038.2714128-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Another round of removing redundant minItems/maxItems when 'items' list is
specified. This time it is in if/then schemas as the meta-schema was
failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Link: https://lore.kernel.org/r/20220503162738.3827041-1-robh@kernel.org
|
|
Kalle Valo says:
====================
wireless-next patches for v5.19
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
- wfx: silicon labs devices
- plfxlc: pureLiFi X, XL, XC devices
mac80211
- host based BSS color collision detection
- prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
- support TP-Link T2E devices
rtw89
- support firmware crash simulation
- preparation for 8852ce hardware support
ath11k
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support for QCA6390 and WCN6855
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- support for WCN6750
wcn36xx
- support for transmit rate reporting to user space
* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
rtw89: 8852c: rfk: add DPK
rtw89: 8852c: rfk: add IQK
rtw89: 8852c: rfk: add RX DCK
rtw89: 8852c: rfk: add RCK
rtw89: 8852c: rfk: add TSSI
rtw89: 8852c: rfk: add LCK
rtw89: 8852c: rfk: add DACK
rtw89: 8852c: rfk: add RFK tables
plfxlc: fix le16_to_cpu warning for beacon_interval
rtw88: remove a copy of the NAPI_POLL_WEIGHT define
carl9170: tx: fix an incorrect use of list iterator
wil6210: use NAPI_POLL_WEIGHT for napi budget
ath10k: remove a copy of the NAPI_POLL_WEIGHT define
ath11k: Add support for WCN6750 device
ath11k: Datapath changes to support WCN6750
ath11k: HAL changes to support WCN6750
ath11k: Add QMI changes for WCN6750
ath11k: Fetch device information via QMI for WCN6750
ath11k: Add register access logic for WCN6750
ath11k: Add HW params for WCN6750
...
====================
Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ath.git patches for v5.19. Major changes:
ath11k
* support setting Specific Absorption Rate (SAR) for WCN6855
* read country code from SMBIOS for WCN6855/QCA6390
* support for WCN6750
|
|
WCN6750 is the WLAN chip on Qualcomm Snapdragon SoC SC7280;
Though being a PCIe based solution, it is not attached to
the APSS processor (Application Processor SubSystem), it is
instead attached to another tiny processor called WPSS Q6
processor (Wireless Processor SubSystem) on the SC7280 MSM,
where the WLAN firmware runs, and it is the WLAN firmware
running on the Q6 processor which enumerates WCN6750, as a
result APPS processor would never know such a device being
present in the system and would not detect the WCN6750
hardware unless and otherwise WCN6750 is registered as a
platform device. This is the reason behind adding WCN6750
WLAN node in the device tree.
Add WCN6750 wireless driver support, its based on ath11k driver.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429170502.20080-2-quic_mpubbise@quicinc.com
|
|
Add CANFD binding documentation for Renesas R9A07G043 (RZ/G2UL) SoC.
Link: https://lore.kernel.org/all/20220423130743.123198-1-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
Rob Herring
Clément Léger
Prasanna Vengateshan
Divya Koppera
Biao Huang
Michael Walle
David S. Miller
Rasmus Villemoes
Kalle Valo
Radhey Shyam Pandey
Frank Wunderlich
Conor Dooley
Linus Torvalds
Alexandru Tachici
Geert Uytterhoeven
Nobuhiro Iwamatsu
Lorenzo Bianconi
Josua Mayer
Chris Packham
Oleksij Rempel
Marc Kleine-Budde
Phil Edworthy
Jakub Kicinski
Wells Lu
Kalle Valo
Manikanta Pubbisetty
Biju Das