aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net
AgeCommit message (Collapse)AuthorFilesLines
2021-02-11dt-bindings: net: bcm4908-enet: include ethernet-controller.yamlRafał Miłecki1-0/+3
It should be /included/ by every Ethernet controller binding. It adds support for various generic properties. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11dt-bindings: net: rename BCM4908 Ethernet bindingRafał Miłecki1-3/+3
Rob pointed out that a normal convention is "brcm,bcm4908-enet" so update whole binding to match it. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernDavid S. Miller1-1/+1
el/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2021-02-11 Here's the main bluetooth-next pull request for 5.12: - Add support for advertising monitor offliading using Microsoft vendor extensions - Add firmware download support for MediaTek MT7921U USB devices - Suspend-related fixes for Qualcomm devices - Add support for Intel GarfieldPeak controller - Various other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11doc: marvell: add CM3 address space and PPv2.3 descriptionStefan Chulski1-2/+4
Patch adds CM3 address space and PPv2.3 description. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09dt-bindings: can: rcar_canfd: Group tuples in pin control propertiesGeert Uytterhoeven1-1/+1
To improve human readability and enable automatic validation, the tuples in "pinctrl-*" properties should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210204125937.1646305-1-geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2021-02-09dt-bindings: ethernet-controller: fix fixed-link specificationRussell King1-0/+5
The original fixed-link.txt allowed a pause property for fixed link. This has been missed in the conversion to yaml format. Fixes: 9d3de3c58347 ("dt-bindings: net: Add YAML schemas for the generic Ethernet options") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1l6W2G-0002Ga-0O@rmk-PC.armlinux.org.uk Signed-off-by: Rob Herring <robh@kernel.org>
2021-02-09dt-bindings: net: document BCM4908 Ethernet controllerRafał Miłecki1-0/+45
BCM4908 is a family of SoCs with integrated Ethernet controller. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08Merge 5.11-rc7 into usb-nextGreg Kroah-Hartman2-3/+0
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-3/+0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-30Merge tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds2-3/+0
Pull devicetree fixes from Rob Herring: - Cleanups on properties with standard unit suffixes - Fix overwriting dma_range_map if there's no 'dma-ranges' property - Fix a bug when creating a /chosen node from ARM ATAGs - Add missing properties for TI j721e USB binding - Several doc reference updates due to DT schema conversions * tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Cleanup standard unit properties of/device: Update dma_range_map only when dev has valid dma-ranges ARM: zImage: atags_to_fdt: Fix node names on added root nodes dt-bindings: usb: j721e: add ranges and dma-coherent props dt-bindings:iio:adc: update adc.yaml reference dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references dt-bindings: display: mediatek: update mediatek,dpi.yaml reference ASoC: audio-graph-card: update audio-graph-card.yaml reference
2021-01-29dt-bindings: Cleanup standard unit propertiesRob Herring2-3/+0
Properties with standard unit suffixes already have a type and don't need type definitions. They also default to a single entry, so 'maxItems: 1' can be dropped. adi,ad5758 is an oddball which defined an enum of arrays. While a valid schema, it is simpler as a whole to only define scalar constraints. Cc: Jean Delvare <jdelvare@suse.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
2021-01-25dt-bindings: net: dsa: add MT7530 GPIO controller bindingDENG Qingfang1-0/+6
Add device tree binding to support MT7530 GPIO controller. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25dt-bindings: net: btusb: DT fix s/interrupt-name/interrupt-names/Geert Uytterhoeven1-1/+1
The standard DT property name is "interrupt-names". Fixes: fd913ef7ce619467 ("Bluetooth: btusb: Add out-of-band wakeup support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Merge v5.11-rc5 into usb-nextGreg Kroah-Hartman2-2/+7
We need the fixes in here and this resolves a merge issue with drivers/usb/gadget/udc/bdc/Kconfig. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-22dt-bindings: net: renesas,etheravb: Add r8a779a0 supportWolfram Sang1-0/+2
Document the compatible value for the RAVB block in the Renesas R-Car V3U (R8A779A0) SoC. This variant has no stream buffer, so we only need to add the new compatible and add it to the TX delay block. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210121100619.5653-2-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21dt-bindings: net: remove modem-remoteproc propertyAlex Elder1-12/+3
The IPA driver uses the remoteproc SSR notifier now, rather than the temporary IPA notification system used initially. As a result it no longer needs a property identifying the modem subsystem DT node. Use GIC_SPI rather than 0 in the example interrupt definition. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19dt-binding: net: ti: k3-am654-cpsw-nuss: update bindings for am64x cpsw3gGrygorii Strashko1-20/+30
Update DT binding for recently introduced TI K3 AM642x SoC [1] which contains 3 port (2 external ports) CPSW3g module. The CPSW3g integrated in MAIN domain and can be configured in multi port or switch modes. The overall functionality and DT bindings are similar to other K3 CPSWxg versions, so DT binding changes are minimal: - reword description - add new compatible 'ti,am642-cpsw-nuss' - allow 2 external ports child nodes - add missed 'assigned-clock' props [1] https://www.ti.com/lit/pdf/spruim2 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19dt-binding: ti: am65x-cpts: add assigned-clock and power-domains propsGrygorii Strashko1-0/+7
The CPTS clock is usually a clk-mux which allows to select CPTS reference clock by using 'assigned-clock-parents', 'assigned-clocks' DT properties. Also depending on integration the power-domains has to be specified to enable CPTS IP. Hence add 'assigned-clock-parents', 'assigned-clocks' and 'power-domains' properties to the CPTS DT bindings to avoid dtbs_check warnings: cpts@310d0000: 'assigned-clock-parents', 'assigned-clocks' do not match any of the regexes: 'pinctrl-[0-9]+' cpts@310d0000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15dt-bindings: net: dsa: add bindings for xrs700x switchesGeorge McCollister1-0/+73
Add documentation and an example for Arrow SpeedChips XRS7000 Series single chip Ethernet switches. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15dt: ar803x: document SmartEEE propertiesRussell King1-0/+16
The SmartEEE feature of Atheros AR803x PHYs can cause the link to bounce. Add DT properties to allow SmartEEE to be disabled, and to allow the Tw parameters for 100M and 1G links to be configured. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15dt-bindings: net: btusb: change reference file nameChunfeng Yun1-1/+1
Due to usb-device.txt is converted into usb-device.yaml, so modify reference file names at the same time. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20201225075258.33352-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11dt-bindings: Add missing array size constraintsRob Herring2-0/+2
DT properties which can have multiple entries need to specify what the entries are and define how many entries there can be. In the case of only a single entry, just 'maxItems: 1' is sufficient. Add the missing entry constraints. These were found with a modified meta-schema. Unfortunately, there are a few cases where the size constraints are not defined such as common bindings, so the meta-schema can't be part of the normal checks. Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Sebastian Reichel <sre@kernel.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Suman Anna <s-anna@ti.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210104230253.2805217-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-01-11dt-bindings: net: dwmac: fix queue priority documentationSeb Laveze1-2/+6
The priority field is not the queue priority (queue priority is fixed) but a bitmask of priorities assigned to this queue. In receive, priorities relate to tagged frames priorities. In transmit, priorities relate to PFC frames. Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com> Link: https://lore.kernel.org/r/20210111081406.1348622-1-sebastien.laveze@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09dt-bindings: net: dsa: sf2: add BCM4908 switch bindingRafał Miłecki1-0/+1
BCM4908 family SoCs have integrated Starfighter 2 switch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210106213202.17459-2-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09dt-bindings: net: convert Broadcom Starfighter 2 binding to the json-schemaRafał Miłecki2-98/+175
This helps validating DTS files. Only the current (not deprecated one) binding was converted. Minor changes: 1. Dropped dsa/dsa.txt references 2. Updated node name to match dsa.yaml requirement 3. Fixed 2 typos in examples The new binding was validated using the dt_binding_check. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20210106213202.17459-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09dt-bindings: net: renesas,etheravb: RZ/G2H needs tx-internal-delay-psGeert Uytterhoeven1-0/+1
The merge resolution of the interaction of commits 307eea32b202864c ("dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC") and d7adf6331189cbe9 ("dt-bindings: net: renesas,etheravb: Convert to json-schema") missed that "tx-internal-delay-ps" should be a required property on RZ/G2H. Fixes: 8b0308fe319b8002 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210105151516.1540653-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07dt-bindings: net: dwmac-meson: use picoseconds for the RGMII RX delayMartin Blumenstingl1-6/+49
Amlogic Meson G12A, G12B and SM1 SoCs have a more advanced RGMII RX delay register which allows picoseconds precision. Deprecate the old "amlogic,rx-delay-ns" in favour of the generic "rx-internal-delay-ps" property. For older SoCs the only known supported values were 0ns and 2ns. The new SoCs have support for RGMII RX delays between 0ps and 3000ps in 200ps steps. Don't carry over the description for the "rx-internal-delay-ps" property and inherit that from ethernet-controller.yaml instead. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06dt-bindings: can: fsl,flexcan: add fsl,scu-index property to indicate a resourceJoakim Zhang1-0/+11
For SoCs with SCU support, need setup stop mode via SCU firmware, so this property can help indicate a resource in SCU firmware. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201106105627.31061-3-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-12-22dt-bindings: net: qcom,ipa: Drop unnecessary type ref on 'memory-region'Rob Herring1-1/+0
'memory-region' is a common property, so it doesn't need a type ref here. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: netdev@vger.kernel.org Acked-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201222040121.1314370-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-18dt-bindings: Fix JSON pointersRob Herring16-67/+67
The correct syntax for JSON pointers begins with a '/' after the '#'. Without a '/', the string should be interpreted as a subschema identifier. The jsonschema module currently doesn't handle subschema identifiers and incorrectly allows JSON pointers to begin without a '/'. Let's fix this before it becomes a problem when jsonschema module is fixed. Converted with: perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"` Cc: Maxime Ripard <mripard@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Cc: netdev@vger.kernel.org Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-16Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-150/+315
Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...
2020-12-16Merge tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds1-2/+0
Pull devicetree updates from Rob Herring: - Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to schemas - Drop PicoXcell bindings - Drop unused and undocumented 'pnx,timeout' property from LPC32xx - Add 'dynamic-power-coefficient' to Mali GPU bindings - Make 'make dt_binding_check' not error out on warnings - Various minor binding fixes * tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits) dt-bindings: mali-bifrost: Add dynamic-power-coefficient dt-bindings: mali-midgard: Add dynamic-power-coefficient dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells" dt-bindings: Remove PicoXcell bindings ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout' dt-bindings: mtd: convert "fixed-partitions" to the json-schema dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes dt-bindings: pci: rcar-pci-ep: Document missing interrupts property dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH dt-bindings: mfd: fix stm32 timers example dt-bindings: trivial-devices: Add delta,q54sj108a2 dt-bindings:i2c:i2c-gate: txt to yaml conversion dt-bindings: add ADP5585/ADP5589 entries to trivial-devices dt-bindings: Correct GV11B GPU register sizes dt-bindings: vendor-prefixes: Add FII dt-bindings: Fix typo on the DesignWare IP reset bindings documentation dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES dt-bindings: arm: vt8500: remove redundant white-spaces dt-bindings: fsl-imx-drm: fix example compatible string ...
2020-12-14dt-bindings: Remove PicoXcell bindingsRob Herring1-2/+0
PicoXcell has had nothing but treewide cleanups for at least the last 8 years and no signs of activity. The most recent activity is a yocto vendor kernel based on v3.0 in 2015. Cc: linux-crypto@vger.kernel.org Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201210200315.2965567-5-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-09dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger typeBongsu Jeon1-1/+1
Change interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING for stable NFC I2C interrupt handling. Samsung's NFC Firmware sends an i2c frame as below. 1. NFC Firmware sets the GPIO(interrupt pin) high when there is an i2c frame to send. 2. If the CPU's I2C master has received the i2c frame, NFC F/W sets the GPIO low. NFC driver's i2c interrupt handler would be called in the abnormal case as the NFC FW task of number 2 is delayed because of other high priority tasks. In that case, NFC driver will try to receive the i2c frame but there isn't any i2c frame to send in NFC. It would cause an I2C communication problem. This case would hardly happen. But, I changed the interrupt as a defense code. If Driver uses the TRIGGER_RISING instead of the LEVEL trigger, there would be no problem even if the NFC FW task is delayed. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09dt-bindings: add documentation for sama7g5 gigabit ethernet interfaceClaudiu Beznea1-0/+1
Add documentation for SAMA7G5 gigabit ethernet interface. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09dt-bindings: add documentation for sama7g5 ethernet interfaceClaudiu Beznea1-0/+1
Add documentation for SAMA7G5 ethernet interface. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08Merge tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann2-0/+61
i.MX DT bindings update for 5.11: - Quite some patches that update vendor-prefixes.yaml and fsl.yaml to document missing board compatibles and add new board compatibles. - A couple of patches from Dong Aisheng to update imx-scu firmware and imx-lpcg clock bindings for new SCU two cells clock support. - A couple of net bindings update from Ioana Ciornei to complete the MAC/PCS/PHY representation on DPAA2 devices. - Document watchdog compatibles for all i.MX and Layerscape devices. * tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits) dt-bindings: arm: fsl: add Protonic WD3 board dt-bindings: vendor-prefixes: add "virtual" prefix dt-bindings: fsl: add kamstrup flex concentrator to schema dt-bindings: arm: fsl: document i.MX7S boards dt-bindings: arm: fsl: document SolidRun LX2160A boards dt-bindings: arm: fsl: document LS1012A FRWY board dt-bindings: arm: fsl: add Van der Laan LANMCU board dt-bindings: arm: fsl: add Altesco I6P board dt-bindings: vendor-prefixes: Add an entry for Altus-Escon-Company dt-bindings: net: add the 10gbase-r connection type dt-bindings: net: add the DPAA2 MAC DTS definition dt-bindings: fsl: add compatible for LX2162A QDS Board dt-bindings: vendor-prefixes: Add an entry for Van der Laan b.v. dt-bindings: arm: fsl: document i.MX7D boards dt-bindings: arm: fsl: document i.MX6ULL boards dt-bindings: arm: fsl: document i.MX6UL boards dt-bindings: arm: fsl: document i.MX6SX boards dt-bindings: arm: fsl: document i.MX6SL boards dt-bindings: arm: fsl: document i.MX6QP boards dt-bindings: arm: fsl: document i.MX6Q boards ... Link: https://lore.kernel.org/r/20201202142717.9262-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux into arm/dtArnd Bergmann3-150/+254
This pull request contains Broadcom ARM-based SoCs changes for 5.11, please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. * tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits) dt-bindings: net: dsa: b53: Add YAML bindings ARM: dts: NSP: Provide defaults ports container node ARM: dts: NSP: Add a SRAB compatible string for each board ARM: dts: NSP: Fix Ethernet switch SGMII register name ARM: dts: NSP: Update ethernet switch node name ARM: dts: BCM5301X: Provide defaults ports container node ARM: dts: BCM5301X: Add a default compatible for switch node ARM: dts: BCM5301X: Update Ethernet switch node name dt-bindings: net: dsa: Document sfp and managed properties dt-bindings: net: dsa: Extend switch nodes pattern ARM: dts: bcm283x: increase dwc2's RX FIFO size ARM: dts: rpi-4: disable wifi frequencies ARM: dts: Cygnus: Drop incorrect io-channel-ranges property. ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3 ARM: dts: BCM5301X: Move CRU devices to the CRU node ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions ARM: dts: BCM5310X: Harmonize xHCI DT nodes name ... Link: https://lore.kernel.org/r/20201128163410.1691529-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-04Merge tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextJakub Kicinski1-0/+6
Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 First set of patches for v5.11. rtw88 getting improvements to work better with Bluetooth and other driver also getting some new features. mhi-ath11k-immutable branch was pulled from mhi tree to avoid conflicts with mhi tree. Major changes: rtw88 * major bluetooth co-existance improvements wilc1000 * Wi-Fi Multimedia (WMM) support ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly * tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits) wl1251: remove trailing semicolon in macro definition airo: remove trailing semicolon in macro definition wilc1000: added queue support for WMM wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt() wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path wilc1000: added 'ndo_set_mac_address' callback support brcmfmac: expose firmware config files through modinfo wlcore: Switch to using the new API kobj_to_dev() rtw88: coex: add feature to enhance HID coexistence performance rtw88: coex: upgrade coexistence A2DP mechanism rtw88: coex: add action for coexistence in hardware initial rtw88: coex: add function to avoid cck lock rtw88: coex: change the coexistence mechanism for WLAN connected rtw88: coex: change the coexistence mechanism for HID rtw88: coex: update AFH information while in free-run mode rtw88: coex: update the mechanism for A2DP + PAN rtw88: coex: add debug message rtw88: coex: run coexistence when WLAN entering/leaving LPS Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices" ... ==================== Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+3
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02dt-bindings: net: nfc: s3fwrn5: Support a UART interfaceBongsu Jeon1-3/+28
Since S3FWRN82 NFC Chip, The UART interface can be used. S3FWRN82 supports I2C and UART interface. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02NFC: nxp-nci: Make firmware GPIO pin optionalFrieder Schrempf1-1/+1
There are other NXP NCI compatible NFC controllers such as the PN7150 that use an integrated firmware and therefore do not have a GPIO to select firmware downloading mode. To support this kind of controller, let's make the firmware GPIO optional. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201201113921.6572-1-frieder.schrempf@kontron.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28dt-bindings: net: correct interrupt flags in examplesKrzysztof Kozlowski3-3/+3
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation") Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25dt-bindings: net: dsa: convert ksz bindings document to yamlChristian Eggers2-125/+148
Convert the bindings document for Microchip KSZ Series Ethernet switches from txt to yaml. Removed spi-cpha and spi-cpol flags is this should be handled by the device driver. Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20dt-bindings: net: dsa: b53: Add YAML bindingsKurt Kanzenbach2-149/+249
Convert the b53 DSA device tree bindings to YAML in order to allow for automatic checking and such. Reviewed-by: Rob Herring <robh@kernel.org> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
2020-11-20dt-bindings: net: dsa: Document sfp and managed propertiesFlorian Fainelli1-0/+4
The 'sfp' and 'managed' properties are commonly used to describe Ethernet switch ports connecting to SFP/SFF cages, describe these two properties as valid that we inherit from ethernet-controller.yaml. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20dt-bindings: net: dsa: Extend switch nodes patternFlorian Fainelli1-1/+1
Upon discussion with Kurt, Rob and Vladimir it appears that we should be allowing ethernet-switch as a node name, update dsa.yaml accordingly. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-20dt-bindings: can: fsl,flexcan: fix fsl,clk-source propertyJoakim Zhang1-2/+2
Correct fsl,clk-source example since flexcan driver uses "of_property_read_u8" to get this property. Fixes: 9d733992772d ("dt-bindings: can: flexcan: add PE clock source property to device tree") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201106105627.31061-2-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20dt-bindings: can: fsl,flexcan: add uint32 reference to clock-frequency propertyMarc Kleine-Budde1-0/+1
This patch adds the missing reference to the clock-frequency property. The driver uses a of_property_read_u32() to read the property to mark it as uint32. Fixes: e5ab9aa7e49b ("dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml") Link: https://lore.kernel.org/r/20201119073357.2858925-1-mkl@pengutronix.de Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Oleksij Rempel <ore@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.