| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Digging through the "phy-qcom-qmp" showed me many inconsistencies
between the bindings and the reality of the driver. Let's fix them
all.
* In commit 2d66eab18375 ("dt-bindings: phy: qmp: Add support for QMP
phy in IPQ8074") we probably should have explicitly listed that
there are no clocks for this PHY and also added the reset names in
alphabetical order. You can see that there are no clocks in the
driver where "clk_list" is NULL.
* In commit 8587b220f05e ("dt-bindings: phy-qcom-qmp: Update bindings
for QMP V3 USB PHY") we probably should have listed the resets for
this new PHY and also removed the "(Optional)" marking for the "cfg"
reset since PHYs that need "cfg" really do need it. It's just that
not all PHYs need it.
* In commit 7f0802074120 ("dt-bindings: phy-qcom-qmp: Update bindings
for sdm845") we forgot to update one instance of the string
"qcom,qmp-v3-usb3-phy" to be "qcom,sdm845-qmp-usb3-phy". Let's fix
that. We should also have added "qcom,sdm845-qmp-usb3-uni-phy" to
the clock-names and reset-names lists.
* In commit 99c7c7364b71 ("dt-bindings: phy-qcom-qmp: Add UFS phy
compatible string for sdm845") we should have added the set of
clocks and resets for "qcom,sdm845-qmp-ufs-phy". These were taken
from the driver.
* Cleanup the wording for what properties child nodes have to make it
more obvious which types of PHYs need clocks and resets. This was
sorta implicit in the "-names" description but I found myself
confused.
* As per the code not all "pcie qmp phys" have resets. Specifically
note that the "has_lane_rst" property in the driver is false for
"ipq8074-qmp-pcie-phy". Thus make it clear exactly which PHYs need
child nodes with resets.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Update the compatible string for UFS QMP PHY on SDM845.
Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
After the commit 8b1087fa3a27 ("phy: qcom-qmp: Fix dts bindings to
reflect reality") landed there was some review feedback that 'reg'
should have been documented differently. Fix it as per review
feedback.
As per that feedback:
- Subject should have been 'dt-bindings: phy:' which this patch now
has.
- We should leave no ambiguity in the ordering of 'reg' ranges even if
'reg-names' are also specified.
- Normally using reg-names is discouraged unless there's a strong
reason it's needed (like if there are optional ranges). In this
case reg-names wasn't needed but the driver already landed relying
on reg-names so we'll just document it and move on.
Fixes: 8b1087fa3a27 ("phy: qcom-qmp: Fix dts bindings to reflect reality")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
A few patches have landed for the qcom-qmp PHY that affect how you
would write a device tree node. ...yet the bindings weren't updated.
Let's remedy the situation and make the bindings refelect reality.
Fixes: efb05a50c956 ("phy: qcom-qmp: Add support for QMP V3 USB3 PHY")
Fixes: ac0d239936bd ("phy: qcom-qmp: Add support for runtime PM")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Update compatible strings for USB3 PHYs on SDM845.
One is QMPv3 DisplayPort-USB combo PHY and other one
is USB UNI PHY which is single lane USB3 PHY without
DP capability. While at it also remove "qcom,qmp-v3-usb3-phy"
compatible string which was earlier added for sdm845
only as there wouldn't be any user of same.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Update compatible string and clock names for QMP version V3
USB PHY.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
IPQ8074 uses QMP PHY controller that provides support to PCIe and
USB. Adding DT binding information for the same.
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The PHY outputs a clock that will act as the parent for
the PHY's pipe clock. Add the name of this clock to the
lane's DT node.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Qualcomm chipsets have QMP phy controller that provides
support to a number of controller, viz. PCIe, UFS, and USB.
Adding dt binding information for the same.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
Douglas Anderson
Can Guo
Manu Gautam
Varadarajan Narayanan
Vivek Gautam