| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking fixes from Jakub Kicinski:
"We have a few fixes for long standing issues, in particular Eric's fix
to not underestimate the skb sizes, and my fix for brokenness of
register_netdevice() error path. They may uncover other bugs so we
will keep an eye on them. Also included are Willem's fixes for
kmap(_atomic).
Looking at the "current release" fixes, it seems we are about one rc
behind a normal cycle. We've previously seen an uptick of "people had
run their test suites" / "humans actually tried to use new features"
fixes between rc2 and rc3.
Summary:
Current release - regressions:
- fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
IPV6_CSUM
- dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
user is admin for backward-compatibility
- selftests/tls: fix selftests build after adding ChaCha20-Poly1305
Current release - always broken:
- ppp: fix refcount underflow on channel unbridge
- bnxt_en: clear DEFRAG flag in firmware message when retry flashing
- smc: fix out of bound access in the new netlink interface
Previous releases - regressions:
- fix use-after-free with UDP GRO by frags
- mptcp: better msk-level shutdown
- rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
request
- i40e: xsk: fix potential NULL pointer dereferencing
Previous releases - always broken:
- skb frag: kmap_atomic fixes
- avoid 32 x truesize under-estimation for tiny skbs
- fix issues around register_netdevice() failures
- udp: prevent reuseport_select_sock from reading uninitialized socks
- dsa: unbind all switches from tree when DSA master unbinds
- dsa: clear devlink port type before unregistering slave netdevs
- can: isotp: isotp_getname(): fix kernel information leak
- mlxsw: core: Thermal control fixes
- ipv6: validate GSO SKB against MTU before finish IPv6 processing
- stmmac: use __napi_schedule() for PREEMPT_RT
- net: mvpp2: remove Pause and Asym_Pause support
Misc:
- remove from MAINTAINERS folks who had been inactive for >5yrs"
* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
mptcp: fix locking in mptcp_disconnect()
net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
MAINTAINERS: dccp: move Gerrit Renker to CREDITS
MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
MAINTAINERS: tls: move Aviad to CREDITS
MAINTAINERS: ena: remove Zorik Machulsky from reviewers
MAINTAINERS: vrf: move Shrijeet to CREDITS
MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
MAINTAINERS: altx: move Jay Cliburn to CREDITS
net: avoid 32 x truesize under-estimation for tiny skbs
nt: usb: USB_RTL8153_ECM should not default to y
net: stmmac: fix taprio configuration when base_time is in the past
net: stmmac: fix taprio schedule configuration
net: tip: fix a couple kernel-doc markups
net: sit: unregister_netdevice on newlink's error path
net: stmmac: Fixed mtu channged by cache aligned
cxgb4/chtls: Fix tid stuck due to wrong update of qid
i40e: fix potential NULL pointer dereferencing
net: stmmac: use __napi_schedule() for PREEMPT_RT
can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
...
|
|
Pull sound fixes from Takashi Iwai:
"Here are some piled fixes, hopefully the last big one for 5.11.
All changes are device-specific small fixes, and majority of commits
are for ASoC while USB-audio got a bit large changes for addressing
the regression for devices with quirks"
* tag 'sound-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
ALSA: hda/hdmi - enable runtime pm for CI AMD display audio
ALSA: firewire-tascam: Fix integer overflow in midi_port_work()
ALSA: fireface: Fix integer overflow in transmit_midi_msg()
ALSA: hda/tegra: fix tegra-hda on tegra30 soc
clk: tegra30: Add hda clock default rates to clock driver
ALSA: doc: Fix reference to mixart.rst
ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices
ALSA: usb-audio: Annotate the endpoint index in audioformat
ALSA: usb-audio: Avoid unnecessary interface re-setup
ALSA: usb-audio: Choose audioformat of a counter-part substream
ALSA: usb-audio: Fix the missing endpoints creations for quirks
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines
ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395
ASoC: amd: Replacing MSI with Legacy IRQ model
ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad E14 Gen 2
ASoC: meson: axg-tdm-interface: fix loopback
ASoC: meson: axg-tdmin: fix axg skew offset
ASoC: max98373: don't access volatile registers in bias level off
ASoC: rt711: mutex between calibration and power state changes
ASoC: Intel: haswell: Add missing pm_ops
...
|
|
The priority field is not the queue priority (queue priority is fixed)
but a bitmask of priorities assigned to this queue.
In receive, priorities relate to tagged frames priorities.
In transmit, priorities relate to PFC frames.
Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com>
Link: https://lore.kernel.org/r/20210111081406.1348622-1-sebastien.laveze@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: dwc3: gadget: Clear wait flag on dequeue
usb: typec: Send uevent for num_altmodes update
usb: typec: Fix copy paste error for NVIDIA alt-mode description
usb: gadget: enable super speed plus
kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
usb: uas: Add PNY USB Portable SSD to unusual_uas
usb: gadget: configfs: Preserve function ordering after bind failure
usb: gadget: select CONFIG_CRC32
usb: gadget: core: change the comment for usb_gadget_connect
usb: gadget: configfs: Fix use-after-free issue with udc_name
usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
usb: usbip: vhci_hcd: protect shift size
USB: usblp: fix DMA to stack
USB: serial: iuu_phoenix: fix DMA from stack
USB: serial: option: add LongSung M5710 module support
USB: serial: option: add Quectel EM160R-GL
USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
usb: gadget: f_uac2: reset wMaxPacketSize
usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
...
|
|
The merge resolution of the interaction of commits 307eea32b202864c
("dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC") and
d7adf6331189cbe9 ("dt-bindings: net: renesas,etheravb: Convert to
json-schema") missed that "tx-internal-delay-ps" should be a required
property on RZ/G2H.
Fixes: 8b0308fe319b8002 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210105151516.1540653-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull dmaengine fixes from Vinod Koul:
"A bunch of dmaengine driver fixes for:
- coverity discovered issues for xilinx driver
- qcom, gpi driver fix for undefined bhaviour and one off cleanup
- update Peter's email for TI DMA drivers
- one-off for idxd driver
- resource leak fix for mediatek and milbeaut drivers"
* tag 'dmaengine-fix-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value
dmaengine: xilinx_dma: fix mixed_enum_type coverity warning
dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()
dmaengine: xilinx_dma: check dma_async_device_register return value
dmaengine: qcom: fix gpi undefined behavior
dt-bindings: dma: ti: Update maintainer and author information
MAINTAINERS: Add entry for Texas Instruments DMA drivers
qcom: bam_dma: Delete useless kfree code
dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()
dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of the probe function
dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function
dmaengine: qcom: gpi: Fixes a format mismatch
dmaengine: idxd: off by one in cleanup code
dmaengine: ti: k3-udma: Fix pktdma rchan TPL level setup
|
|
|
|
PMIC pm8009 has special revision (P=1) made for sm8250 platform. The
major difference is the S2 regulator which supplies 0.95 V instead of
2.848V. Add special compatibility string for this chip revision.
The datasheet calls the chip just pm8009-1, so use the same name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
My employment with TI is coming to an end, add the copyright and author comments
as they due and change the maintainer mail address.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20201215131348.11282-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible string in j721e-usb binding file as the same USB subsystem
is present in AM64.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20201215042549.7956-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Linux 5.11-rc1
|
|
Linux 5.11-rc1
|
|
Pull devicetree fixes from Rob Herring:
- Correct the JSON pointer syntax in binding schemas
- Drop unnecessary *-supply schema constraints
- Drop redundant maxItems/items on array schemas
- Fix various yamllint warnings
- Fix various missing 'additionalProperties' properties
* tag 'devicetree-fixes-for-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Drop redundant maxItems/items
dt-bindings: net: qcom,ipa: Drop unnecessary type ref on 'memory-region'
dt-bindings: Drop unnecessary *-supply schemas properties
dt-bindings/display: abt,y030xx067a: Fix binding
dt-bindings: clock: imx8qxp-lpcg: eliminate yamllint warnings
dt-bindings: display: eliminate yamllint warnings
dt-bindings: media: nokia,smia: eliminate yamllint warnings
dt-bindings: devapc: add the required property 'additionalProperties'
dt-bindings: soc: add the required property 'additionalProperties'
dt-bindings: serial: add the required property 'additionalProperties'
dt-bindings: xlnx,vcu-settings: fix dt_binding_check warnings
media: dt-bindings: coda: Add missing 'additionalProperties'
dt-bindings: Fix JSON pointers
|
|
Pull watchdog updates from Wim Van Sebroeck:
- Removal of the pnx83xx driver
- Add a binding for A100's watchdog controller
- Add Rockchip compatibles to snps,dw-wdt.yaml
- hpwdt: Disable NMI in Crash Kernel
- Fix potential dereferencing of null pointer in watchdog_core
- Several other small fixes and improvements
* tag 'linux-watchdog-5.11-rc1' of git://www.linux-watchdog.org/linux-watchdog: (23 commits)
watchdog: convert comma to semicolon
watchdog: iTCO_wdt: use dev_*() instead of pr_*() for logging
dt-binding: watchdog: add Rockchip compatibles to snps,dw-wdt.yaml
watchdog: coh901327: add COMMON_CLK dependency
dt-bindings: watchdog: sun4i: Add A100 compatible
watchdog: qcom: Avoid context switch in restart handler
watchdog: iTCO_wdt: use module_platform_device() macro
watchdog: Fix potential dereferencing of null pointer
watchdog: wdat_wdt: Fix missing kerneldoc reported by W=1
watchdog/hpwdt: Reflect changes
watchdog/hpwdt: Disable NMI in Crash Kernel
wdt: sp805: add watchdog_stop on reboot
watchdog: sbc_fitpc2_wdt: add __user annotations
watchdog: geodewdt: remove unneeded break
watchdog: rti-wdt: fix reference leak in rti_wdt_probe
watchdog: qcom_wdt: set WDOG_HW_RUNNING bit when appropriate
watchdog: remove pnx83xx driver
watchdog: stm32_iwdg: don't print an error on probe deferral
watchdog: sprd: change to use usleep_range() instead of busy loop
watchdog: sprd: check busy bit before new loading rather than after that
...
|
|
'maxItems' equal to the 'items' list length is redundant. 'maxItems' is
preferred for a single entry while greater than 1 should have an 'items'
list.
A meta-schema check for this is pending once these existing cases are
fixed.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201222040645.1323611-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
'memory-region' is a common property, so it doesn't need a type ref here.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: netdev@vger.kernel.org
Acked-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201222040121.1314370-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
*-supply properties are always a single phandle, so binding schemas
don't need a type $ref nor 'maxItems'.
A meta-schema check for this is pending once these existing cases are
fixed.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-media@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201221234659.824881-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull clk updates from Stephen Boyd:
"The core framework got some nice improvements this time around. We
gained the ability to get struct clk pointers from a struct clk_hw so
that clk providers can consume the clks they provide, if they need to
do something like that. This has been a long missing part of the clk
provider API that will help us move away from exposing a struct clk
pointer in the struct clk_hw. Tracepoints are added for the
clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to
help developers understand the hardware enable state of clks in case
firmware or bootloader state is different than what is expected.
Overall the core changes are mostly improving the clk driver writing
experience.
At the driver level, we have the usual collection of driver updates
and new drivers for new SoCs. This time around the Qualcomm folks
introduced a good handful of clk drivers for various parts of three or
four SoCs. The SiFive folks added a new clk driver for their FU740
SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
SoCs had lots of work done after that for various new features. One
last thing to note in the driver area is that the i.MX driver has
gained a new binding to support SCU clks after being on the list for
many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and
tweaks that come from more testing and finding out that some
configuration was wrong or that a driver could support being built as
a module.
Summary:
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
dt-binding: clock: Document canaan,k210-clk bindings
dt-bindings: Add Canaan vendor prefix
clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
clk: ingenic: Fix divider calculation with div tables
clk: sunxi-ng: Make sure divider tables have sentinel
clk: s2mps11: Fix a resource leak in error handling paths in the probe function
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
clk: si5351: Wait for bit clear after PLL reset
clk: at91: sam9x60: remove atmel,osc-bypass support
clk: at91: sama7g5: register cpu clock
clk: at91: clk-master: re-factor master clock
clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
clk: at91: sama7g5: decrease lower limit for MCK0 rate
clk: at91: sama7g5: remove mck0 from parent list of other clocks
clk: at91: clk-sam9x60-pll: allow runtime changes for pll
clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
clk: at91: clk-master: add 5th divisor for mck master
clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
dt-bindings: clock: at91: add sama7g5 pll defines
clk: at91: sama7g5: fix compilation error
...
|
|
- Bindings for Canaan K210 SoC clks
* clk-ingenic:
clk: ingenic: Fix divider calculation with div tables
* clk-vc5:
clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
* clk-cleanup:
clk: sunxi-ng: Make sure divider tables have sentinel
clk: s2mps11: Fix a resource leak in error handling paths in the probe function
clk: bcm: dvp: Add MODULE_DEVICE_TABLE()
clk: bcm: dvp: drop a variable that is assigned to only
* clk-canaan:
dt-binding: clock: Document canaan,k210-clk bindings
dt-bindings: Add Canaan vendor prefix
* clk-marvell:
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
|
|
- Add some trace points for clk_set_rate() "range" functions
- DVFS support for AT91 clk driver
* clk-ti:
clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs
clk: ti: Fix memleak in ti_fapll_synth_setup
* clk-analog:
clk: axi-clkgen: move the OF table at the bottom of the file
clk: axi-clkgen: wrap limits in a struct and keep copy on the state object
dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format
* clk-trace:
clk: Trace clk_set_rate() "range" functions
* clk-at91:
clk: at91: sam9x60: remove atmel,osc-bypass support
clk: at91: sama7g5: register cpu clock
clk: at91: clk-master: re-factor master clock
clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
clk: at91: sama7g5: decrease lower limit for MCK0 rate
clk: at91: sama7g5: remove mck0 from parent list of other clocks
clk: at91: clk-sam9x60-pll: allow runtime changes for pll
clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
clk: at91: clk-master: add 5th divisor for mck master
clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
dt-bindings: clock: at91: add sama7g5 pll defines
clk: at91: sama7g5: fix compilation error
* clk-silabs:
clk: si5351: Wait for bit clear after PLL reset
|
|
- Support for SiFive FU740 PRCI
- Add hardware enable information to clk_summary debugfs
* clk-tegra:
clk: tegra: Fix duplicated SE clock entry
clk: tegra: bpmp: Clamp clock rates on requests
clk: tegra: Do not return 0 on failure
* clk-imx: (24 commits)
clk: imx: scu: remove the calling of device_is_bound
clk: imx: scu: Make pd_np with static keyword
clk: imx8mq: drop of_match_ptr from of_device_id table
clk: imx8mp: drop of_match_ptr from of_device_id table
clk: imx8mn: drop of_match_ptr from of_device_id table
clk: imx8mm: drop of_match_ptr from of_device_id table
clk: imx: gate2: Remove unused variable ret
clk: imx: gate2: Add locking in is_enabled op
clk: imx: gate2: Add cgr_mask for more flexible number of control bits
clk: imx: gate2: Check if clock is enabled against cgr_val
clk: imx: gate2: Keep the register writing in on place
clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case
clk: imx: scu: fix build break when compiled as modules
clk: imx: remove redundant assignment to pointer np
clk: imx: remove unneeded semicolon
clk: imx: lpcg: add suspend/resume support
clk: imx: clk-imx8qxp-lpcg: add runtime pm support
clk: imx: lpcg: allow lpcg clk to take device pointer
clk: imx: imx8qxp-lpcg: add parsing clocks from device tree
clk: imx: scu: add suspend/resume support
...
* clk-sifive:
clk: sifive: Add clock enable and disable ops
clk: sifive: Fix the wrong bit field shift
clk: sifive: Add a driver for the SiFive FU740 PRCI IP block
clk: sifive: Use common name for prci configuration
clk: sifive: Extract prci core to common base
dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI
* clk-mediatek:
clk: mediatek: Make mtk_clk_register_mux() a static function
* clk-summary:
clk: Add hardware-enable column to clk summary
|
|
- Replace clk-provider.h with of_clk.h when possible
* clk-amlogic:
clk: meson: g12a: add MIPI DSI Host Pixel Clock
dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings
clk: meson: enable building as modules
clk: meson: Kconfig: fix dependency for G12A
clk: meson: axg: add MIPI DSI Host clock
clk: meson: axg: add Video Clocks
dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding
dt-bindings: clk: axg-clkc: add Video Clocks
* clk-rockchip:
clk: rockchip: fix i2s gate bits on rk3066 and rk3188
clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks
clk: rockchip: Remove redundant null check before clk_prepare_enable
clk: rockchip: Add appropriate arch dependencies
* clk-of:
xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h>
sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h>
* clk-freescale:
clk: fsl-flexspi: new driver
dt-bindings: clock: document the fsl-flexspi-clk device
clk: divider: add devm_clk_hw_register_divider_table()
clk: qoriq: provide constants for the type
clk: fsl-sai: use devm_clk_hw_register_composite_pdata()
clk: composite: add devm_clk_hw_register_composite_pdata()
clk: fsl-sai: fix memory leak
clk: qoriq: Add platform dependencies
* clk-unused:
clk: scpi: mark scpi_clk_match as maybe unused
clk: pwm: drop of_match_ptr from of_device_id table
|
|
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
* clk-doc:
clk: fix a kernel-doc markup
* clk-qcom: (27 commits)
clk: qcom: rpmh: add support for SM8350 rpmh clocks
dt-bindings: clock: Add RPMHCC bindings for SM8350
clk: qcom: lpasscc: Introduce pm autosuspend for SC7180
clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2
clk: qcom: gcc-sc7180: Use floor ops for sdcc clks
clk: qcom: Add GDSC support for SDX55 GCC
dt-bindings: clock: Add GDSC in SDX55 GCC
clk: qcom: Add support for SDX55 RPMh clocks
dt-bindings: clock: Introduce RPMHCC bindings for SDX55
clk: qcom: Add SDX55 GCC support
dt-bindings: clock: Add SDX55 GCC clock bindings
clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic"
clk: qcom: rpmh: Add CE clock on sdm845.
dt-bindings: clock: Add entry for crypto engine RPMH clock resource
clk: qcom: dispcc-sm8250: handle MMCX power domain
clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones
clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init()
clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks
clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks
dt-bindings: clock: Add support for LPASS Always ON Controller
...
* clk-simplify:
clk: remove unneeded dead-store initialization
* clk-hw:
clk: meson: g12: use devm variant to register notifiers
clk: add devm variant of clk_notifier_register
clk: meson: g12: drop use of __clk_lookup()
clk: add api to get clk consumer from clk_hw
clk: avoid devm_clk_release name clash
* clk-renesas:
dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema
clk: renesas: sh73a0: Stop using __raw_*() I/O accessors
clk: renesas: r8a774c0: Add RPC clocks
clk: renesas: r8a779a0: Fix R and OSC clocks
clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv
clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()
clk: renesas: r8a774b1: Add RPC clocks
clk: renesas: r8a774a1: Add RPC clocks
clk: renesas: r8a779a0: Add VIN clocks
clk: renesas: r8a779a0: Add CSI4[0-3] clocks
MAINTAINERS: Update git repo for Renesas clock drivers
clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static
clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI
* clk-samsung:
clk: samsung: Prevent potential endless loop in the PLL ops
clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210
|
|
Document the device tree bindings of the Canaan Kendryte K210 SoC clock
driver in Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml.
The header file include/dt-bindings/clock/k210-clk.h is modified to
include the complete list of IDs for all clocks of the SoC.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201220085725.19545-3-damien.lemoal@wdc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Update Documentation/devicetree/bindings/vendor-prefixes.yaml to
include "canaan" as a vendor prefix for "Canaan Inc.". Canaan is the
vendor of the Kendryte K210 RISC-V SoC.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201220085725.19545-2-damien.lemoal@wdc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Remove nvram ABI. There was no complaints about the deprecation for
the last 3 years.
- Improve RTC device allocation and registration
- Now available for ARCH=um
Drivers:
- at91rm9200: correction and sam9x60 support
- ds1307: improve ACPI support
- mxc: now DT only
- pcf2127: watchdog support now needs the reset-source property
- pcf8523: set range
- rx6110: i2c support"
* tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits)
rtc: pcf2127: only use watchdog when explicitly available
dt-bindings: rtc: add reset-source property
rtc: fix RTC removal
rtc: s3c: Remove dead code related to periodic tick handling
rtc: s3c: Disable all enable (RTC, tick) bits in the probe
rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time
rtc: test: remove debug message
rtc: mxc{,_v2}: enable COMPILE_TEST
rtc: enable RTC framework on ARCH=um
rtc: pcf8523: use BIT
rtc: pcf8523: set range
rtc: pcf8523: switch to devm_rtc_allocate_device
rtc: destroy mutex when releasing the device
rtc: shrink devm_rtc_allocate_device()
rtc: rework rtc_register_device() resource management
rtc: nvmem: emit an error message when nvmem registration fails
rtc: add devm_ prefix to rtc_nvmem_register()
rtc: nvmem: remove nvram ABI
Documentation: list RTC devres helpers in devres.rst
rtc: omap: use devm_pinctrl_register()
...
|
|
Pull i3c updates from Boris Brezillon:
- Add the HCI driver
- Add a missing destroy_workqueue() in an error path
- Flag Alexandre Belloni as the new maintainer
* tag 'i3c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c/master/mipi-i3c-hci: quiet maybe-unused variable warning
i3c: Resign from my maintainer role
i3c/master: Fix uninitialized variable next_addr
i3c/master: introduce the mipi-i3c-hci driver
dt-bindings: i3c: MIPI I3C Host Controller Interface
i3c master: fix missing destroy_workqueue() on error in i3c_master_register
|
|
Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:
- collie_battery, generic-adc-battery, s3c-adc-battery: convert to
GPIO descriptors (incl ARM board files)
- misc cleanup and fixes
Reset drivers:
- new poweroff driver for force disabling a regulator
- use printk format symbol resolver
- ocelot: add support for Luton and Jaguar2"
* tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (31 commits)
power: supply: Fix a typo in warning message
Documentation: DT: binding documentation for regulator-poweroff
power: reset: new driver regulator-poweroff
power: supply: ab8500: Use dev_err_probe() for IIO channels
power: supply: ab8500_fg: Request all IRQs as threaded
power: supply: ab8500_charger: Oneshot threaded IRQs
power: supply: ab8500: Convert to dev_pm_ops
power: supply: ab8500: Use local helper
power: supply: wm831x_power: remove unneeded break
power: supply: bq24735: Drop unused include
power: supply: bq24190_charger: Drop unused include
power: supply: generic-adc-battery: Use GPIO descriptors
power: supply: collie_battery: Convert to GPIO descriptors
power: supply: bq24190_charger: fix reference leak
power: supply: s3c-adc-battery: Convert to GPIO descriptors
power: reset: Use printk format symbol resolver
power: supply: axp20x_usb_power: Use power efficient workqueue for debounce
power: supply: axp20x_usb_power: fix typo
power: supply: max8997-charger: Improve getting charger status
power: supply: max8997-charger: Fix platform data retrieval
...
|
|
Pull pwm updates from Thierry Reding:
"This is a fairly big release cycle from the PWM framework's point of
view.
There's a large patcheset here which converts drivers to use the new
devm_platform_ioremap_resource() helper and a bunch of minor fixes to
existing drivers. Some of the existing drivers also add support for
more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183.
Finally there's a couple of new drivers for Intel Keem Bay and LGM
SoCs as well as the DesignWare PWM controller"
* tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits)
pwm: sun4i: Remove erroneous else branch
pwm: sl28cpld: Set driver data before registering the PWM chip
pwm: Remove unused function pwmchip_add_inversed()
pwm: imx27: Fix overflow for bigger periods
pwm: bcm2835: Support apply function for atomic configuration
pwm: keembay: Fix build failure with -Os
pwm: core: Use octal permission
pwm: lpss: Make compilable with COMPILE_TEST
pwm: Fix dependencies on HAS_IOMEM
pwm: Use -EINVAL for unsupported polarity
pwm: sti: Remove unnecessary blank line
pwm: sti: Avoid conditional gotos
pwm: Add PWM fan controller driver for LGM SoC
Add DT bindings YAML schema for PWM fan controller of LGM SoC
pwm: Add DesignWare PWM Controller Driver
dt-bindings: pwm: mtk-disp: add MT8167 SoC binding
pwm: mediatek: Add MT8183 SoC support
pwm: mediatek: Always use bus clock
dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC
pwm: Add PWM driver for Intel Keem Bay
...
|
|
Some RTCs, e.g. the pcf2127, can be used as a hardware watchdog. But
if the reset pin is not actually wired up, the driver exposes a
watchdog device that doesn't actually work.
Provide a standard binding that can be used to indicate that a given
RTC can perform a reset of the machine, similar to wakeup-source.
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201218101054.25416-2-rasmus.villemoes@prevas.dk
|
|
The binding should use "unevaluatedProperties" instead of
"additionalProperties", since it is a SPI device and may have
SPI-related Device Tree properties, for instance the "spi-max-frequency"
property that is present in the example.
Fixes: e366a644c69d ("dt-bindings: display: Add ABT Y030XX067A panel bindings")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20201217005945.335111-1-paul%40crapouillou.net
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Eliminate the following yamllint warnings:
./Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
:32:13:[warning] wrong indentation: expected 14 but found 12 (indentation)
:35:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201207045527.1607-2-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Eliminate the following yamllint warnings:
./Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
:52:9: [warning] wrong indentation: expected 6 but found 8 (indentation)
./Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
:42:8: [warning] wrong indentation: expected 8 but found 7 (indentation)
:45:8: [warning] wrong indentation: expected 8 but found 7 (indentation)
./Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
:21:6: [warning] wrong indentation: expected 6 but found 5 (indentation)
./Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
:25:10: [warning] wrong indentation: expected 10 but found 9 (indentation)
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201207044830.1551-2-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Eliminate the following yamllint warnings:
./Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
:4:1: [error] missing document start "---" (document-start)
:29:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
:32:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201207042400.1498-3-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When I do dt_binding_check for any YAML file, below wanring is always
reported:
xxx/soc/mediatek/devapc.yaml: 'additionalProperties' is a required property
xxx/soc/mediatek/devapc.yaml: ignoring, error in schema:
warning: no schema found in file: xxx/soc/mediatek/devapc.yaml
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201204093813.1275-5-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When I do dt_binding_check for any YAML file, below wanring is always
reported:
xxx/soc/litex/litex,soc-controller.yaml: 'additionalProperties' is a required property
xxx/soc/litex/litex,soc-controller.yaml: ignoring, error in schema:
warning: no schema found in file: xxx/soc/litex/litex,soc-controller.yaml
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201204093813.1275-4-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When I do dt_binding_check for any YAML file, below wanring is always
reported:
xxx/serial/litex,liteuart.yaml: 'additionalProperties' is a required property
xxx/serial/litex,liteuart.yaml: ignoring, error in schema:
warning: no schema found in file: xxx/serial/litex,liteuart.yaml
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201204093813.1275-3-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When running make dt_binding_check, the xlnx,vcu-settings binding
triggers the following two warnings:
'additionalProperties' is a required property
example-0: vcu@a0041000:reg:0: [0, 2684620800, 0, 4096] is too long
Fix the binding and make the checker happy.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201202090522.251607-1-m.tretter@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
'additionalProperties' is now required by the meta-schema. Add it for
coda. As a result, 'interrupts', 'interrupt-names' and 'power-domains'
need to be reworked to be defined at the top level.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20201117200752.4004368-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpreted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.
Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: netdev@vger.kernel.org
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull more drm updates from Daniel Vetter:
"UAPI Changes:
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers"
* tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits)
drm/qxl: don't allocate a dma_address array
drm/nouveau: fix multihop when move doesn't work.
drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping
drm/i915: Fix mismatch between misplaced vma check and vma insert
drm/i915/perf: also include Gen11 in OATAILPTR workaround
Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"
drm/amdgpu/disply: fix documentation warnings in display manager
drm/amdgpu: print mmhub client name for dimgrey_cavefish
drm/amdgpu: set mode1 reset as default for dimgrey_cavefish
drm/amd/display: Add get_dig_frontend implementation for DCEx
drm/radeon: remove h from printk format specifier
drm/amdgpu: remove h from printk format specifier
drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"
drm/amdgpu: fix regression in vbios reservation handling on headless
drm/amdgpu/SRIOV: Extend VF reset request wait period
drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log.
drm/amd/display: Adding prototype for dccg21_update_dpp_dto()
drm/amdgpu: print what method we are using for runtime pm
drm/amdgpu: simplify logic in atpx resume handling
drm/amdgpu: no need to call pci_ignore_hotplug for _PR3
...
|
|
Pull GPIO updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips now
use the template struct gpio_irq_chip and pass that to the core to
be set up alongside the gpio_chip. We can finally get rid of the
old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME (wall
clock) timestamps. We have found solid use cases for this, so we
support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which is
pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device tree
client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for register
access"
* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
MAINTAINERS: Remove reference to non-existing file
gpio: hisi: Do not require ACPI for COMPILE_TEST
MAINTAINERS: Add maintainer for HiSilicon GPIO driver
gpio: gpio-hisi: Add HiSilicon GPIO support
gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
dt-bindings: mt7621-gpio: convert bindings to YAML format
gpiolib: cdev: Flag invalid GPIOs as used
gpio: put virtual gpio device into their own submenu
drivers: gpio: amd8111: use SPDX-License-Identifier
drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
gpio: Add TODO item for debugfs interface
gpio: just plain warning when nonexisting gpio requested
tools: gpio: add option to report wall-clock time to gpio-event-mon
tools: gpio: add support for reporting realtime event clock to lsgpio
gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
gpio: msc313: MStar MSC313 GPIO driver
dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
...
|
|
Pull OpenRISC updates from Stafford Horne:
- New drivers and OpenRISC support for the LiteX platform
- A bug fix to support userspace gdb debugging
- Fixes one compile issue with blk-iocost
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: add local64.h to fix blk-iocost build
openrisc: fix trap for debugger breakpoint signalling
openrisc: add support for LiteX
drivers/tty/serial: add LiteUART driver
dt-bindings: serial: document LiteUART bindings
drivers/soc/litex: add LiteX SoC Controller driver
dt-bindings: soc: document LiteX SoC Controller bindings
dt-bindings: vendor: add vendor prefix for LiteX
|
|
Pull dmaengine updates from Vinod Koul:
"The last dmaengine updates for this year :)
This contains couple of new drivers, new device support and updates to
bunch of drivers.
New drivers/devices:
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI drivers"
* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
dmaengine: ti: k3-udma: Initial support for K3 BCDMA
soc: ti: k3-ringacc: add AM64 DMA rings support.
dmaengine: ti: Add support for k3 event routers
dmaengine: ti: k3-psil: Add initial map for AM64
dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 BCDMA
dmaengine: dmatest: Use dmaengine_get_dma_device
dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
dmaengine: Add support for per channel coherency handling
dmaengine: of-dma: Add support for optional router configuration callback
dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
dmaengine: ti: k3-udma: Add support for second resource range from sysfw
dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
...
|
|
Pull mailbox updates from Jassi Brar:
- arm: added mhu-v2 controller driver
- arm_mhu_db: fix kfree by using devm_ variant
- stm32-ipcc: misc cleanup
* tag 'mailbox-v5.11' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: arm_mhuv2: Add driver
dt-bindings: mailbox : arm,mhuv2: Add bindings
mailbox: stm32-ipcc: cast void pointers to unsigned long
mailbox: stm32-ipcc: remove duplicate error message
mailbox: stm32-ipcc: add COMPILE_TEST dependency
mailbox: arm_mhu_db: Fix mhu_db_shutdown by replacing kfree with devm_kfree
|
|
Intel's LGM(Lightning Mountain) SoC contains a PWM fan controller
which is only used to control the fan attached to the system. This
PWM controller does not have any other consumer other than fan.
Add DT bindings documentation for this PWM fan controller.
Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add binding for MT8167 SoC. The IP is compatible with MT8173.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add binding documentation for the MT8183 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add PWM Device Tree bindings documentation for the Intel Keem Bay SoC.
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Move the TCB pwm nodes under their parent. This removes the need for the
tc-block property as there is now a child-parent relationship between the
TC channel and the TC block.
Move the documentation to the main file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
Linus Torvalds
Seb Laveze
Geert Uytterhoeven
Mark Brown
Dmitry Baryshkov
Peter Ujfalusi
Aswath Govindraju
Rob Herring
Stephen Boyd
Damien Le Moal
Rasmus Villemoes
Paul Cercueil
Zhen Lei
Michael Tretter
Rahul Tanwar
Fabien Parent
Vijayakannan Ayyathurai
Alexandre Belloni