| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
|
|
Pull more clk updates from Stephen Boyd:
"This is the second batch of clk driver updates that needed a little
more time to soak in linux-next.
- Use modern i2c probe in vc5
- Cleanup some includes
- Update links to datasheets
- Add UniPhier NX1 SoC clk support
- Fix DT bindings for SiFive FU740
- Revert the module platform driver support for Rockchip because it
wasn't actually tested
- Fix the composite clk code again as the previous fix had a one line
bug that broke rate changes for clks that want to use the same
parent still
- Use the right table for a divider in ast2600 driver
- Get rid of gcc_aggre1_pnoc_ahb_clk in qcom clk driver again because
its critical but unused"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
clk: imx8m: Do not set IMX_COMPOSITE_CORE for non-regular composites
clk/ast2600: Fix soc revision for AHB
clk: composite: Fix 'switching' to same clock
clk: rockchip: drop module parts from rk3399 and rk3568 drivers
Revert "clk: rockchip: use module_platform_driver_probe"
clk:mediatek: remove duplicate include in clk-mt8195-imp_iic_wrap.c
dt-bindings: clock: fu740-prci: add reset-cells
clk: uniphier: Add SoC-glue clock source selector support for Pro4
dt-bindings: clock: uniphier: Add clock binding for SoC-glue
clk: uniphier: Add NX1 clock support
dt-bindings: clock: uniphier: Add NX1 clock binding
clk: uniphier: Add audio system and video input clock control for PXs3
clk: si5351: Update datasheet references
clk: vc5: Use i2c .probe_new
clk/actions/owl-factor.c: remove superfluous headers
clk: ingenic: Fix bugs with divided dividers
|
|
Pull pwm updates from Thierry Reding:
"This set is mostly small fixes and cleanups, so more of a janitorial
update for this cycle"
* tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specific
dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindings
dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings
pwm: pwm-samsung: Trigger manual update when disabling PWM
pwm: visconti: Simplify using devm_pwmchip_add()
pwm: samsung: Describe driver in Kconfig
pwm: Make it explicit that pwm_apply_state() might sleep
pwm: Add might_sleep() annotations for !CONFIG_PWM API functions
pwm: atmel: Drop unused header
|
|
Pull more drm updates from Dave Airlie:
"I missed a drm-misc-next pull for the main pull last week. It wasn't
that major and isn't the bulk of this at all. This has a bunch of
fixes all over, a lot for amdgpu and i915.
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix"
* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
drm/ttm: Double check mem_type of BO while eviction
drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
drm/amdgpu: drop jpeg IP initialization in SRIOV case
drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
drm/amd/display: Don't lock connection_mutex for DMUB HPD
drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
drm/amdkfd: Fix retry fault drain race conditions
drm/amdkfd: lower the VAs base offset to 8KB
drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
drm/i915/fb: Fix rounding error in subsampled plane size calculation
drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
drm/locking: fix __stack_depot_* name conflict
drm/virtio: Fix NULL dereference error in virtio_gpu_poll
drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
drm/amd/amdkfd: Don't sent command to HWS on kfd reset
...
|
|
Pull input updates from Dmitry Torokhov:
"Just one new driver (Cypress StreetFighter touchkey), and no input
core changes this time.
Plus various fixes and enhancements to existing drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: iforce - fix control-message timeout
Input: wacom_i2c - use macros for the bit masks
Input: ili210x - reduce sample period to 15ms
Input: ili210x - improve polled sample spacing
Input: ili210x - special case ili251x sample read out
Input: elantench - fix misreporting trackpoint coordinates
Input: synaptics-rmi4 - Fix device hierarchy
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Input: cap11xx - add support for cap1206
Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
Input: ili210x - add ili251x firmware update support
Input: ili210x - export ili251x version details via sysfs
Input: ili210x - use resolution from ili251x firmware
Input: pm8941-pwrkey - respect reboot_mode for warm reset
reboot: export symbol 'reboot_mode'
Input: max77693-haptic - drop unneeded MODULE_ALIAS
Input: cpcap-pwrbutton - do not set input parent explicitly
Input: max8925_onkey - don't mark comment as kernel-doc
Input: ads7846 - do not attempt IRQ workaround when deferring probe
Input: ads7846 - use input_set_capability()
...
|
|
Pull RTC updates from Alexandre Belloni:
"This includes new ioctls to get and set parameters and in particular
the backup switch mode that is needed for some RTCs to actually enable
the backup voltage (and have a useful RTC).
The same interface can also be used to get the actual features
supported by the RTC so userspace has a better way than trying and
failing.
Summary:
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes
backup switch mode
- Expose available features to userspace, in particular, when alarmas
have a resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset"
* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: rx8025: use .set_offset/.read_offset
rtc: rx8025: use rtc_add_group
rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
rtc: rx8025: set range
rtc: rx8025: let the core handle the alarm resolution
rtc: rx8025: switch to devm_rtc_allocate_device
rtc: ab8500: let the core handle the alarm resolution
rtc: ab-eoz9: support UIE when available
rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
rtc: rv3032: let the core handle the alarm resolution
rtc: s35390a: let the core handle the alarm resolution
rtc: handle alarms with a minute resolution
rtc: pcf85063: silence cppcheck warning
rtc: rv8803: fix writing back ctrl in flag register
rtc: s3c: Add time range
rtc: s3c: Extract read/write IO into separate functions
rtc: s3c: Remove usage of devm_rtc_device_register()
rtc: tps80031: Remove driver
rtc: sun6i: Allow probing without an early clock provider
rtc: pcf8523: add BSM support
...
|
|
"maxItems" is not needed with an "items" list
Fixes:
$ DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml make dtbs_check
Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml: properties:clocks: {'required': ['maxItems']} is not allowed for {'minItems': 1, 'maxItems': 2, 'items': [{'description': 'High-frequency oscillator input, divided internally'}, {'description': 'Low-frequency oscillator input, only found on some variants'}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
...
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211029142443.68779-1-david@ixit.cz
|
|
make dt_binding_check:
Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml: ignoring, error in schema: properties: power-domain-names
warning: no schema found in file: Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml: properties:power-domain-names: {'required': ['maxItems']} is not allowed for {'minItems': 2, 'maxItems': 3, 'items': [{'const': 'venus'}, {'const': 'vcodec0'}, {'const': 'cx'}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Fixes: e48b839b6699c226 ("media: dt-bindings: media: venus: Add sc7280 dt schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/d94924e1bd00f396f2106f04d4a2bb839cf5f071.1636453406.git.geert+renesas@glider.be
|
|
Support for Netlogic was removed in commit 95b8a5e0111a ("MIPS: Remove
NETLOGIC support"). Remove the now unused bindings.
The GPIO binding also includes "brcm,vulcan-gpio", but it appears to be
unused as well as Broadcom Vulkan became Cavium ThunderX2 which is ACPI
based.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: George Cherian <gcherian@marvell.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211109161707.2209170-1-robh@kernel.org
|
|
Not all @st.com email address are concerned, only people who have
a specific @foss.st.com email will see their entry updated.
For some people, who left the company, remove their email.
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Lionel Debieve <lionel.debieve@foss.st.com>
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Cc: Ludovic Barre <ludovic.barre@foss.st.com>
Cc: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: pascal Paillet <p.paillet@foss.st.com>
Cc: Erwan Le Ray <erwan.leray@foss.st.com>
Cc: Philippe CORNU <philippe.cornu@foss.st.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20211110150144.18272-6-patrice.chotard@foss.st.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Benjamin has left the company, remove his name from maintainers.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20211110150144.18272-5-patrice.chotard@foss.st.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Benjamin has left the company, remove his name from maintainers.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20211110150144.18272-4-patrice.chotard@foss.st.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Benjamin has left the company, remove his name from maintainers.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20211110150144.18272-3-patrice.chotard@foss.st.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Benjamin has left the company, add Fabrice and myself as maintainers.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20211110150144.18272-2-patrice.chotard@foss.st.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
clock-frequency is only restricted by the upper limit of 400 kHz.
Found with:
$ DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-imx.yaml make dtbs_check
...
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: i2c@30a20000: clock-frequency:0:0: 387000 is not one of [100000, 400000]
From schema: linux/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
...
Fixes: 4bdc44347299 ("dt-bindings: i2c: Convert imx i2c to json-schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20211029141134.66170-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert toshiba,tc358767.txt binding to yaml format
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Link: https://lore.kernel.org/r/20211028093656.25493-1-r-ravikumar@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Tidy up a bit the tree, by prefixing all include/dt-bindings/clock/ files
related to Ingenic SoCs with 'ingenic,'.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211016133322.40771-1-paul@crapouillou.net
|
|
Pull more power management updates from Rafael Wysocki:
"These fix three intel_pstate driver regressions, fix locking in the
core code suspending and resuming devices during system PM
transitions, fix the handling of cpuidle drivers based on runtime PM
during system-wide suspend, fix two issues in the operating
performance points (OPP) framework and resource-managed helpers to it.
Specifics:
- Fix two intel_pstate driver regressions related to the HWP
interrupt handling added recently (Srinivas Pandruvada).
- Fix intel_pstate driver regression introduced during the 5.11 cycle
and causing HWP desired performance to be mishandled in some cases
when switching driver modes and during system suspend and shutdown
(Rafael Wysocki).
- Fix system-wide device suspend and resume locking to avoid
deadlocks when device objects are deleted during a system-wide PM
transition (Rafael Wysocki).
- Modify system-wide suspend of devices to prevent cpuidle drivers
based on runtime PM from misbehaving during the "no IRQ" phase of
it (Ulf Hansson).
- Fix return value of _opp_add_static_v2() helper (YueHaibing).
- Fix required-opp handle count (Pavankumar Kondeti).
- Add resource managed OPP helpers, update dev_pm_opp_attach_genpd(),
update their devfreq users, and make minor DT binding change
(Dmitry Osipenko)"
* tag 'pm-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Avoid calling put_device() under dpm_list_mtx
cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable
cpufreq: intel_pstate: Fix unchecked MSR 0x773 access
cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline
PM: sleep: Fix runtime PM based cpuidle support
dt-bindings: opp: Allow multi-worded OPP entry name
opp: Fix return in _opp_add_static_v2()
PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
PM / devfreq: tegra30: Use resource-managed helpers
PM / devfreq: Add devm_devfreq_add_governor()
opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
opp: Change type of dev_pm_opp_attach_genpd(names) argument
opp: Fix required-opps phandle array count check
|
|
Pull dmaengine updates from Vinod Koul:
"A bunch of driver updates, no new driver or controller support this
time though:
- Another pile of idxd updates
- pm routines cleanup for at_xdmac driver
- Correct handling of callback_result for few drivers
- zynqmp_dma driver updates and descriptor management refinement
- Hardware handshaking support for dw-axi-dmac
- Support for remotely powered controllers in Qcom bam dma
- tegra driver updates"
* tag 'dmaengine-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (69 commits)
dmaengine: ti: k3-udma: Set r/tchan or rflow to NULL if request fail
dmaengine: ti: k3-udma: Set bchan to NULL if a channel request fail
dmaengine: stm32-dma: avoid 64-bit division in stm32_dma_get_max_width
dmaengine: fsl-edma: support edma memcpy
dmaengine: idxd: fix resource leak on dmaengine driver disable
dmaengine: idxd: cleanup completion record allocation
dmaengine: zynqmp_dma: Correctly handle descriptor callbacks
dmaengine: xilinx_dma: Correctly handle cyclic descriptor callbacks
dmaengine: altera-msgdma: Correctly handle descriptor callbacks
dmaengine: at_xdmac: fix compilation warning
dmaengine: dw-axi-dmac: Simplify assignment in dma_chan_pause()
dmaengine: qcom: bam_dma: Add "powered remotely" mode
dt-bindings: dmaengine: bam_dma: Add "powered remotely" mode
dmaengine: sa11x0: Mark PM functions as __maybe_unused
dmaengine: switch from 'pci_' to 'dma_' API
dmaengine: ioat: switch from 'pci_' to 'dma_' API
dmaengine: hsu: switch from 'pci_' to 'dma_' API
dmaengine: hisi_dma: switch from 'pci_' to 'dma_' API
dmaengine: dw: switch from 'pci_' to 'dma_' API
dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' API
...
|
|
Pull watchdog updates from Wim Van Sebroeck:
- f71808e_wdt: convert to watchdog framework
- db8500_wdt: Rename driver (was ux500_wdt.c)
- sunxi: Add compatibles for R329 and D1
- mtk: add disable_wdt_extrst support
- several other small fixes and improvements
* tag 'linux-watchdog-5.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: db8500_wdt: Rename symbols
watchdog: db8500_wdt: Rename driver
watchdog: ux500_wdt: Drop platform data
watchdog: bcm63xx_wdt: fix fallthrough warning
watchdog: iTCO_wdt: No need to stop the timer in probe
watchdog: s3c2410: describe driver in KConfig
watchdog: sp5100_tco: Add support for get_timeleft
watchdog: mtk: add disable_wdt_extrst support
dt-bindings: watchdog: mtk-wdt: add disable_wdt_extrst support
watchdog: rza_wdt: Use semicolons instead of commas
watchdog: mlx-wdt: Use regmap_write_bits()
watchdog: rti-wdt: Make use of the helper function devm_platform_ioremap_resource()
watchdog: iTCO_wdt: Make use of the helper function devm_platform_ioremap_resource()
watchdog: ar7_wdt: Make use of the helper function devm_platform_ioremap_resource_byname()
watchdog: sunxi_wdt: Add support for D1
dt-bindings: watchdog: sunxi: Add compatibles for D1
ar7: fix kernel builds for compiler test
dt-bindings: watchdog: sunxi: Add compatibles for R329
watchdog: meson_gxbb_wdt: add timeout parameter
watchdog: meson_gxbb_wdt: add nowayout parameter
...
|
|
Pull remoteproc updates from Bjorn Andersson:
"The remoteproc repo is moved to a new path on git.kernel.org, to allow
Mathieu push access to the branches.
Support for the Mediatek MT8195 SCP was added, the related DeviceTree
binding was converted to YAML and MT8192 SCP was documented as well.
Amlogic Meson6, Meson8, Meson8b and Meson8m2 has an ARC core to aid in
resuming the system after suspend, a new remoteproc driver for booting
this core is introduced.
A new driver to support the DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP is added.
The Qualcomm modem and TrustZone based remoteproc drivers gains
support for the modem in SC7280 and MSM8996 gains support for a
missing power-domain.
Throughout the Qualcomm drivers, the support for informing the
always-on power coprocessor about the state of each remoteproc is
reworked to avoid complications related to our use of genpd and the
system suspend state.
Lastly a number of small fixes are found throughout the drivers and
framework"
* tag 'rproc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (39 commits)
remoteproc: Remove vdev_to_rvdev and vdev_to_rproc from remoteproc API
remoteproc: omap_remoteproc: simplify getting .driver_data
remoteproc: qcom_q6v5_mss: Use devm_platform_ioremap_resource_byname() to simplify code
remoteproc: Fix a memory leak in an error handling path in 'rproc_handle_vdev()'
remoteproc: Fix spelling mistake "atleast" -> "at least"
remoteproc: imx_dsp_rproc: mark PM functions as __maybe_unused
remoteproc: imx_dsp_rproc: Correct the comment style of copyright
dt-bindings: dsp: fsl: Update binding document for remote proc driver
remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX
remoteproc: imx_rproc: Add IMX_RPROC_SCU_API method
remoteproc: imx_rproc: Move common structure to header file
rpmsg: char: Remove useless include
remoteproc: meson-mx-ao-arc: fix a bit test
remoteproc: mss: q6v5-mss: Add modem support on SC7280
dt-bindings: remoteproc: qcom: Update Q6V5 Modem PIL binding
remoteproc: qcom: pas: Add SC7280 Modem support
dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support
remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998
MAINTAINERS: Update remoteproc repo url
dt-bindings: remoteproc: k3-dsp: Cleanup SoC compatible from DT example
...
|
|
Merge operating performance points (OPP) framework updates for and
intel_pstate driver fixes for 5.16-rc1.
* pm-opp:
dt-bindings: opp: Allow multi-worded OPP entry name
opp: Fix return in _opp_add_static_v2()
PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
PM / devfreq: tegra30: Use resource-managed helpers
PM / devfreq: Add devm_devfreq_add_governor()
opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
opp: Change type of dev_pm_opp_attach_genpd(names) argument
opp: Fix required-opps phandle array count check
* pm-cpufreq:
cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable
cpufreq: intel_pstate: Fix unchecked MSR 0x773 access
cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline
|
|
Pull MFD updates from Lee Jones:
"Removed Drivers:
- Remove support for TI TPS80031/TPS80032 PMICs
New Device Support:
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
New Functionality:
- Add support for Power Off to Rockchip RK817
Fix-ups:
- Simplify Regmap passing to child devices in hi6421-spmi-pmic
- SPDX licensing updates in ti_am335x_tscadc
- Improve error handling in ti_am335x_tscadc
- Expedite clock search in ti_am335x_tscadc
- Generic simplifications in ti_am335x_tscadc
- Use generic macros/defines in ti_am335x_tscadc
- Remove unused code in ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD in wcd934x
- Add namespacing in ti_am335x_tscadc
- Restrict compilation to relevant arches in intel_pmt
- Provide better description/documentation in exynos_lpass
- Add SPI device ID table in altera-a10sr, motorola-cpcap,
sprd-sc27xx-spi
- Change IRQ handling in qcom-pm8xxx
- Split out I2C and SPI code in arizona
- Explicitly include used headers in altera-a10sr
- Convert sysfs show() function to in sysfs_emit
- Standardise *_exit() and *_remove() return values in mc13xxx,
stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
qcom-spmi-pmic, max77686-private
- Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic
Bug Fixes:
- Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type in sec-irq, max77693, max14577
- Repair off-by-one in altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"
* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
mfd: tps80031: Remove driver
mfd: max77686: Correct tab-based alignment of register addresses
mfd: wcd934x: Replace legacy gpio interface for gpiod
dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
mfd: dln2: Add cell for initializing DLN2 ADC
mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
mfd: qcom-spmi-pmic: Sort compatibles in the driver
mfd: qcom-spmi-pmic: Sort the compatibles in the binding
mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
mfd: altera-a10sr: Include linux/module.h
mfd: tps65912: Make tps65912_device_exit() return void
mfd: stmpe: Make stmpe_remove() return void
mfd: mc13xxx: Make mc13xxx_common_exit() return void
dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
mfd: arizona: Split of_match table into I2C and SPI versions
...
|
|
Pull gpio updates from Bartosz Golaszewski:
"We have a single new driver, new features in others and some cleanups
all over the place.
Nothing really stands out and it is all relatively small.
- new driver: gpio-modepin (plus relevant change in zynqmp firmware)
- add interrupt support to gpio-virtio
- enable the 'gpio-line-names' property in the DT bindings for
gpio-rockchip
- use the subsystem helpers where applicable in gpio-uniphier instead
of accessing IRQ structures directly
- code shrink in gpio-xilinx
- add interrupt to gpio-mlxbf2 (and include the removal of custom
interrupt code from the mellanox ethernet driver)
- support multiple interrupts per bank in gpio-tegra186 (and force
one interrupt per bank in older models)
- fix GPIO line IRQ offset calculation in gpio-realtek-otto
- drop unneeded MODULE_ALIAS expansions in multiple drivers
- code cleanup in gpio-aggregator
- minor improvements in gpio-max730x and gpio-mc33880
- Kconfig cleanups"
* tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
virtio_gpio: drop packed attribute
gpio: virtio: Add IRQ support
gpio: realtek-otto: fix GPIO line IRQ offset
gpio: clean up Kconfig file
net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
gpio: mlxbf2: Introduce IRQ support
gpio: mc33880: Drop if with an always false condition
gpio: max730x: Make __max730x_remove() return void
gpio: aggregator: Wrap access to gpiochip_fwd.tmp[]
gpio: modepin: Add driver support for modepin GPIO controller
dt-bindings: gpio: zynqmp: Add binding documentation for modepin
firmware: zynqmp: Add MMIO read and write support for PS_MODE pin
gpio: tps65218: drop unneeded MODULE_ALIAS
gpio: max77620: drop unneeded MODULE_ALIAS
gpio: xilinx: simplify getting .driver_data
gpio: tegra186: Support multiple interrupts per bank
gpio: tegra186: Force one interrupt per bank
gpio: uniphier: Use helper functions to get private data from IRQ data
gpio: uniphier: Use helper function to get IRQ hardware number
dt-bindings: gpio: add gpio-line-names to rockchip,gpio-bank.yaml
|
|
Pull i2c updates from Wolfram Sang:
- big refactoring of the PASEMI driver to support the Apple M1
- huge improvements to the XIIC in terms of locking and SMP safety
- refactoring and clean ups for the i801 driver
... and the usual bunch of small driver updates
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (43 commits)
i2c: amd-mp2-plat: ACPI: Use ACPI_COMPANION() directly
i2c: i801: Add support for Intel Ice Lake PCH-N
i2c: virtio: update the maintainer to Conghui
i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
i2c: qup: move to use request_irq by IRQF_NO_AUTOEN flag
i2c: qup: fix a trivial typo
i2c: tegra: Ensure that device is suspended before driver is removed
i2c: i801: Fix incorrect and needless software PEC disabling
i2c: mediatek: Dump i2c/dma register when a timeout occurs
i2c: mediatek: Reset the handshake signal between i2c and dma
i2c: mlxcpld: Allow flexible polling time setting for I2C transactions
i2c: pasemi: Set enable bit for Apple variant
i2c: pasemi: Add Apple platform driver
i2c: pasemi: Refactor _probe to use devm_*
i2c: pasemi: Allow to configure bus frequency
i2c: pasemi: Move common reset code to own function
i2c: pasemi: Split pci driver to its own file
i2c: pasemi: Split off common probing code
i2c: pasemi: Remove usage of pci_dev
i2c: pasemi: Use dev_name instead of port number
...
|
|
Pull auxdisplay updates from Miguel Ojeda:
- 4-digit 7-segment and quad alphanumeric display support for the
ht16k33 driver, allowing the user to display and scroll text
messages, from Geert Uytterhoeven.
- An assortment of fixes and cleanups from Geert Uytterhoeven.
- Header cleanups from Mianhan Liu.
- Whitespace cleanup from Huiquan Deng.
* tag 'auxdisplay-for-linus-v5.16' of git://github.com/ojeda/linux: (26 commits)
MAINTAINERS: Add DT Bindings for Auxiliary Display Drivers
auxdisplay: cfag12864bfb: code indent should use tabs where possible
auxdisplay: ht16k33: remove superfluous header files
auxdisplay: ks0108: remove superfluous header files
auxdisplay: cfag12864bfb: remove superfluous header files
auxdisplay: ht16k33: Make use of device properties
auxdisplay: ht16k33: Add LED support
dt-bindings: auxdisplay: ht16k33: Document LED subnode
auxdisplay: ht16k33: Add support for segment displays
auxdisplay: ht16k33: Extract frame buffer probing
auxdisplay: ht16k33: Extract ht16k33_brightness_set()
auxdisplay: ht16k33: Move delayed work
auxdisplay: ht16k33: Add helper variable dev
auxdisplay: ht16k33: Convert to simple i2c probe function
auxdisplay: ht16k33: Remove unneeded error check in keypad probe()
auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize()
auxdisplay: ht16k33: Fix frame buffer device blanking
auxdisplay: ht16k33: Connect backlight to fbdev
auxdisplay: linedisp: Add support for changing scroll rate
auxdisplay: linedisp: Use kmemdup_nul() helper
...
|
|
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
|
|
- Add Qualcomm PCIe Endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Add qcom struct for device-specific details in match data (Prasad
Malisetty)
- Switch pcie_1_pipe_clk_src from TCXO to pipe clock after PHY init in
SC7280 (Prasad Malisetty)
- Add .compatible device ID for SC8180x platform (Bjorn Andersson)
* remotes/lorenzo/pci/qcom:
PCI: qcom: Add sc8180x compatible
PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280
PCI: qcom: Replace ops with struct pcie_cfg in pcie match data
MAINTAINERS: Add entry for Qualcomm PCIe Endpoint driver and binding
PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver
dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller
|
|
- Add MediaTek MT7621 SoC PCIe host controller (moved from staging) (Sergio
Paracuellos)
* pci/host/mt7621:
MAINTAINERS: Add Sergio Paracuellos as MT7621 PCIe maintainer
PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver
dt-bindings: PCI: Add MT7621 SoC PCIe host controller
# Conflicts:
# drivers/pci/controller/Kconfig
# drivers/pci/controller/Makefile
|
|
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
|
|
Add missing compatible for the PM8018 model.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211020231646.278706-1-david@ixit.cz
|
|
Update the binding with eight more SPMI PMIC compatibles found in the
PMIC info list in the Qualcomm socinfo driver and add the two PM660
related PMICs supported by the SPMI PMIC driver but are missing from the
document.
Then remove the duplicate entry for pma8084.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211017161218.2378176-3-bjorn.andersson@linaro.org
|
|
Create some order in the list of compatibles by sorting them.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211017161218.2378176-1-bjorn.andersson@linaro.org
|
|
Add document Samsung's Exynos Auto v9 compatible for system registers.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211010032246.146939-2-chanho61.park@samsung.com
|
|
The X-Powers AXP PMICs feature a GPIO Controller supported by Linux
thanks to its device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924071614.868307-1-maxime@cerno.tech
|
|
Document rk3368 compatible for QoS registers.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210925090405.2601792-2-heiko@sntech.de
|
|
The X-Powers AXP PMICs are supported by Linux thanks to its device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924071614.868307-2-maxime@cerno.tech
|
|
The X-Powers AC100 hybrid devices are supported by Linux thanks to its
device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924071614.868307-3-maxime@cerno.tech
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 14577/77836 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and charger driver, so using
level sensitive interrupt is here especially important to avoid races.
With an edge configuration in case if first PMIC signals interrupt
followed shortly after by the RTC, the interrupt might not be yet
cleared/acked thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-4-krzysztof.kozlowski@canonical.com
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77693 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-3-krzysztof.kozlowski@canonical.com
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com
|
|
The LogiCVC multi-function device has a display part which is now
described in its binding. Add a patternProperties match for it.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Northstar's USB 2.0 PHY is part of the CRU MFD.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
CRU has a shared register that is used e.g. to control USB 2.0 PHY block
access. It's a single 32 b register. Document it as syscon so it can be
used with a regmap.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Broadcom's MISC is an MFD hardware block used on some of their SoCs like
bcm63xx and bcm4908. At this point only PCIe reset is fully understood
and documented. More functions may be added later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
|
|
Add device tree bindings for TPU found on R-Car M3-W+ SoCs.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add device tree bindings for TPU with the PWM controller found
on R-Car V3U SoCs.
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
drm-misc-next for 5.16:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- fbdev: Fix double-free, Remove unused scrolling acceleration
- locking: improve logging for contented locks without backoff
- dma-buf: Add dma_resv_for_each_fence iterator, and conversion of
users
Driver Changes:
- nouveau: Various code style improvements
- bridge: HPD improvements for lt9611uxc, eDP aux-bus support for
ps8640, lvds-codec data-mapping selection support
- panels: Vivax TPC-9150, Innolux G070Y2-T02, LOGIC Technologies
LTTD800480070-L2RT, Sharp LS060T1SX01,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014120452.2wicnt6hobu3kbwb@gilmour
|
Linus Torvalds
David Heidelberg
Geert Uytterhoeven
Rob Herring
Patrice Chotard
Rahul T R
Paul Cercueil
Rafael J. Wysocki
Bjorn Helgaas
Bjorn Andersson
Chanho Park
Maxime Ripard
Heiko Stuebner
Krzysztof Kozlowski
Paul Kocialkowski
Baruch Siach
Rafał Miłecki
Lee Jones
Wolfram Sang
Duc Nguyen
Dave Airlie