| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Jonathan writes:
IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
iio: adc: xilinx-xadc: Make use of device properties
iio: light: cm32181: Add PM support
iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: stm32-adc: disable adc before calibration
iio: adc: stm32-adc: make safe adc disable
iio: dac: ad5380: align '*' each line and drop unneeded blank line
iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
iio: Don't use bare "unsigned"
dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
iio: dac: mcp4922: add support to mcp4921
iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
iio: adc: stm32-adc: Use generic_handle_domain_irq()
proximity: vl53l0x: Make VDD regulator actually optional
MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
iio: gyro: bmg160: Fix typo in comment
...
|
|
Convert SPI DT binding for Atmel/Microchip SoCs to json-schema.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220713132908.175026-1-sergiu.moga@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add binding description for temperature channels. Currently, support for
label and temperature-offset-millicelsius is implemented.
Signed-off-by: Slawomir Stepien <slawomir.stepien@nokia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220525073657.573327-3-sst@poczta.fm
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This will allow binding the driver with the device from the device tree.
This device can work in extended temperature measurement mode, so add it
also to the list of devices that support 'ti,extended-range-enable'.
Signed-off-by: Slawomir Stepien <slawomir.stepien@nokia.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220525073657.573327-2-sst@poczta.fm
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Analog Devices LT7182S Dual Channel Step-Down Switcher.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Johannes Berg says:
====================
A small set of fixes for
* queue selection in mesh/ocb
* queue handling on interface stop
* hwsim virtio device vs. some other virtio changes
* dt-bindings email addresses
* color collision memory allocation
* a const variable in rtw88
* shared SKB transmit in the ethernet format path
* P2P client port authorization
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add documentation for SPI controller in Intel Thunder Bay SoC.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220713042223.1458-3-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The entries in arrays must have fixed order, so the bindings and Linux
driver expecting various combinations of 'reg' addresses was never
actually conforming to guidelines.
The 'core' reg entry is valid only for SDCC v4 and lower, so disallow it
in SDCC v5. SDCC v4 supports CQE and ICE, so allow them, even though
the qcom,sdhci-msm-v4 compatible is used also for earlier SoCs with SDCC
v2 or v3, so it is not entirely accurate.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220712144245.17417-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bindings before conversion to DT schema expected reg-names without
"_mem" suffix. This was used by older DTS files and by the MSM SDHCI
driver.
Reported-by: Douglas Anderson <dianders@chromium.org>
Fixes: edfbf8c307ff ("dt-bindings: mmc: sdhci-msm: Fix issues in yaml bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220712144245.17417-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
I need to have some vc4 patches merged in -rc4, but drm-misc-next is
only at -rc2 for now.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Two cleanups
- Remove Joonyoung Shim from MAINTAINERS and relevant yaml files.
He left from Samsung so his email address isn't valid anymore.
Fixup
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712061008.199961-1-inki.dae@samsung.com
|
|
Next for v5.20
GPU:
- a619 support
- Fix for unclocked GMU register access
- Devcore dump enhancements
Core:
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
DPU:
- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes
DP:
- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change
MDP5:
- MSM8953 perf data
HDMI:
- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
|
|
Backmerge in rc6 so I can merge msm next easier.
Linux 5.19-rc6
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Rename the dt nodes shown in the sff,sfp.yaml examples so that they are
generic and not really tied to a specific platform.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the sff,sfp.txt bindings to the DT schema format.
Also add the new path to the list of maintained files.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7180 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-3-git-send-email-quic_sibis@quicinc.com
|
|
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7280 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-2-git-send-email-quic_sibis@quicinc.com
|
|
Qualcomm driver updates for v5.20
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
* tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: icc-bwmon: Add bandwidth monitoring driver
dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device
soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
soc: qcom: llcc: Fix syntax errors in comments
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
firmware: qcom_scm: Add bw voting support to the SCM interface
dt-bindings: firmware: qcom-scm: Add interconnects property
soc: qcom: cmd-db: replace strscpy_pad() with strncpy()
dt-bindings: firmware: scm: Add compatible for SDX65
dt-bindings: arm: qcom: switch maintainer to Bjorn
soc: qcom: rpmhpd: fix typos in comment
soc: qcom: correct kerneldoc
soc: qcom: cmd-db: replace strncpy() with strscpy_pad()
firmware: qcom_scm-legacy: correct kerneldoc
dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM
soc: qcom: apr: Drop redundant check in .remove()
firmware: qcom_scm: drop unexpected word "the"
soc: qcom: socinfo: Add an ID for sc7180P
Link: https://lore.kernel.org/r/20220712021830.1271398-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
TI Driver updates for v5.20
* pruss: Enable support for AM62, bindings cleanups
* wkup_m3_ipc: cosmetic cleanup
* tag 'ti-driver-soc-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: pruss: Enable support for PRUSS-M subsystem on K3 AM62x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM62x SoCs
dt-bindings: soc: ti: pruss: Re-arrange "compatible" in alphabetic order
soc: ti: wkup_m3_ipc: Remove unneeded semicolon
Link: https://lore.kernel.org/r/20220708232655.reqjdbib52ejdja4@unadvised
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
memory: tegra: Changes for v5.20-rc1
Add memory client definitions for the Multi-Gigabit Ethernet (MGBE)
controllers found on Tegra234.
* tag 'tegra-for-5.20-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add MGBE memory clients for Tegra234
dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB 2.0 binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 AXI2APB binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB 1.0 binding
dt-bindings: memory: Add Tegra234 MGBE memory clients
dt-bindings: Add Tegra234 MGBE clocks and resets
dt-bindings: power: Add Tegra234 MGBE power domains
dt-bindings: Add headers for Tegra234 GPCDMA
Link: https://lore.kernel.org/r/20220708185608.676474-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
pmic wrapper:
- code style improvements
devapc:
- add support for MT8186
Smart Voltage Scaling (SVS)
- add support for MT8183 and MT8192
MMSYS:
- Add more display paths for MT8365
Mutex:
- Add common interface for MOD and SOF table
- Add support for MDP on MT8183
- Move binding to soc folder
- Add support to use CMDQ to enable the mutex, needed by MDP3
Power domains:
- Add support for MT6795
* tag 'v5.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (29 commits)
soc: mediatek: mutex: Simplify with devm_platform_get_and_ioremap_resource()
soc: mediatek: pm-domains: Add support for Helio X10 MT6795
dt-bindings: power: Add MediaTek Helio X10 MT6795 power domains
soc: mediatek: SVS: Use DEFINE_SIMPLE_DEV_PM_OPS for svs_pm_ops
soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGs
soc: mediatek: fix missing clk_disable_unprepare() on err in svs_resume()
soc: mediatek: mutex: Use DDP_COMPONENT_DITHER0 mod index for MT8365
soc: mediatek: mutex: add functions that operate registers by CMDQ
dt-bindings: soc: mediatek: add gce-client-reg for MUTEX
dt-bindings: soc: mediatek: move out common module from display folder
soc: mediatek: mutex: add 8183 MUTEX MOD settings for MDP
soc: mediatek: mutex: add common interface for modules setting
soc: mediatek: pm-domains: Add support always on flag
soc: mediatek: mt8365-mmsys: add DPI/HDMI display path
soc: mediatek: mutex: add MT8365 support
soc: mediatek: SVS: add mt8192 SVS GPU driver
dt-bindings: soc: mediatek: add mt8192 svs dt-bindings
soc: mediatek: SVS: add debug commands
soc: mediatek: SVS: add monitor mode
soc: mediatek: SVS: introduce MTK SVS engine
...
Link: https://lore.kernel.org/r/b733bd82-6d99-23ef-0541-98e98eb8d3bc@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This commit adds dt-binding documentation of mmc for MediaTek MT8188 SoC
platform.
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708114747.13878-1-johnson.wang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit "mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC" added
support for utilizing a hardware reset and parsing it from DT, however
the bindings were not updated along with it.
So, document the usage of "resets" property with the limit of only one
item.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220704143554.1180927-1-robimarko@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the Samsung SoC SDHCI Controller bindings to DT schema.
The original bindings were quite old and incomplete, so add during
conversion typical (already used) properties like reg, clocks,
interrupts.
The bindings were not precising the clocks, although the upstream DTS
and Linux driver were expecting bus clocks in certain patterns in any
order. Document the status quo even though it is not a proper approach
for bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220626120342.38851-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The patch enabling generic Gen4 support forgot to add the clock
requirements which are the same as for Gen3. Update the binding.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220608122344.3431-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220608094831.8242-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220603233810.21972-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the mmc-spi-slot text based binding doc to yaml,
with the side effect of cleaning up some of the riscv
dtbs_check warnings.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220606201343.514391-2-mail@conchuod.ie
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the compatible for Samsung Exynos5420 SoC Synopsys Designware
MSHC with SMU, already used in DTS and driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220605163710.144210-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the Samsung Exynos SoC specific extensions to the Synopsys
Designware Mobile Storage Host Controller to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220605163710.144210-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The 72116B0 has improved SDIO controllers that allow the max clock
rate to be increased from a max of 100MHz to a max of 150MHz.
Optional "sdio_freq" clock is used to drive the bus clock if present
optional property "clock-frequency" specifies a base clock frequency
in Hz that overrides the base clock frequency in the CAPS registers.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220520183108.47358-2-kdasu.kdev@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Rob pointed some remaining issues in the sdhci-msm yaml
bindings (via [1]).
Fix the same by first using the 'mmc-controller.yaml' as
'ref' and thereafter also fix the issues reported by
'make dtbs_check' check.
[1]. https://lore.kernel.org/linux-arm-msm/YnLmNCwNfoqZln12@robh.at.kernel.org/
Fixes: a45537723f4b ("dt-bindings: mmc: sdhci-msm: Convert bindings to yaml")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220514220116.1008254-1-bhupesh.sharma@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Mediatek DRM Next for Linux 5.20
1. Add Mediatek Soc DRM (vdosys0) support for mt8195
2. Cooperate with DSI RX devices to modify dsi funcs and delay mipi high to cooperate with panel sequence
3. Add mt8186 dsi compatible and convert dsi_dtbinding to .yaml
4. Add MediaTek SoC DRM (vdosys1) support for mt8195
5. Add MT8195 dp_intf driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix drm_edid.h include]
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220709142021.24260-1-chunkuang.hu@kernel.org
|
|
To support path tag in icc-rpm driver, the "#interconnect-cells"
property is updated as enumerate values: 1 or 2. Setting to 1 means
it is compatible with old DT binding that interconnect path only
contains node id; if set to 2 for "#interconnect-cells" property, then
the second specifier is used as a tag (e.g. vote for which buckets).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-2-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
drm/tegra: Changes for v5.20-rc1
The bulk of these changes adds support for context isolation for the
various supported host1x engines, as well as support for the hardware
found on the new Tegra234 SoC generation.
There's also a couple of fixes and cleanups. To round things off, the
device tree bindings are converted to the new json-schema format that
allows DTBs to be validated.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708181136.673789-1-thierry.reding@gmail.com
|
|
Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so remove him from maintainers of DT bindings (display,
phy).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Channel events adopt the newly centralized 'linux,code' property;
slider events should too.
Fixes: 8ac14d2c2d81 ("dt-bindings: input: Centralize 'linux,code' definition")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220710024713.17275-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the arm,arm-firmware-suite partition binding to DT schema
format. Simple conversion as there's only a compatible property.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220629185031.23826-1-robh@kernel.org
|
|
Add a new bindings to describe ums512 clock compatible string.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220505101433.1575096-2-gengcixi@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Cortex A78AE's MPIDR has been added since
commit 83bea32ac7ed ("arm64: Add part number for Arm Cortex-A78AE")
We also need to add the compatible.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220707082753.28862-1-chanho61.park@samsung.com
|
|
Fixed string property names should be under 'properties' rather than
'patternProperties'. Additionally, without beginning and end of line
anchors, any prefix or suffix is allowed on the specified property names.
As all the nvidia,tegra20-pmc powergates child node properties are fixed
strings, change 'patternProperties' to 'properties'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220706212034.568861-1-robh@kernel.org
|
|
Suzuki writes:
CoreSight self-hosted tracing changes for v5.20.
- Fixes LOCKDEP warnings on module unload with configfs
- Conversion of DT bindings to DT schema
- Branch broadcast support for perf cs_etm
- Etm4x driver fixes for build failures with Clang and unrolled loops
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: avoid build failure with unrolled loops
Documentation: coresight: Expand branch broadcast documentation
Documentation: coresight: Link config options to existing documentation
Documentation: coresight: Turn numbered subsections into real subsections
coresight: Add config flag to enable branch broadcast
Documentation: coresight: Escape coresight bindings file wildcard
dt-bindings: arm: Convert CoreSight CPU debug to DT schema
dt-bindings: arm: Convert CoreSight bindings to DT schema
dt-bindings: arm: Rename Coresight filenames to match compatible
coresight: syscfg: Update load and unload operations
coresight: configfs: Fix unload of configurations on module exit
coresight: Clear the connection field properly
|
|
This patch adds the function of headphone button detection,
Button detection will be enabled if the device tree
has a key_enable property.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20220627032959.3442064-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- added H616 EMAC compatible
- make pinctrl interrupts optionals in DT binding
- initial H616 DTSI
- added OrangePi Zero 2 board
- added X96 Mate TV box
- add VCC PI supply in pinctrl DT binding
* tag 'sunxi-dt-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add X96 Mate TV box support
arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support
dt-bindings: arm: sunxi: Add two H616 board compatible strings
dt-bindings: pinctrl: sunxi: allow vcc-pi-supply
arm64: dts: allwinner: Add Allwinner H616 .dtsi file
dt-bindings: pinctrl: sunxi: Make interrupts optional
dt-bindings: arm: sunxi: Add H616 EMAC0 compatible
Link: https://lore.kernel.org/r/YsnF9cm/qniIOklj@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX DT bindings update for 5.20:
- Compatibles for new boards: i.MX7 based Toradex Colibri, DH electronics
i.MX8M Plus DHCOM and PDK2, TQMa8MPxL, Carrier for Toradex i.MX6 Apalis,
i.MX93 EVK, PHYTEC i.MX8MM based board.
- A series from Abel Vesa (and Viorel Suman) to split fsl,scu.txt bindings
into multiple subsystem bindings in yaml format.
- Fix 'line too long' warning caused by Toradex Colibri boards.
* tag 'imx-bindings-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: add TQMa8MPxL board
dt-bindings: firmware: Add fsl,scu yaml file
dt-bindings: watchdog: Add fsl,scu-wdt yaml file
dt-bindings: thermal: Add fsl,scu-thermal yaml file
dt-bindings: rtc: Add fsl,scu-rtc yaml file
dt-bindings: power: Add fsl,scu-pd yaml file
dt-bindings: nvmem: Add fsl,scu-ocotp yaml file
dt-bindings: input: Add fsl,scu-key yaml file
dt-bindings: pinctrl: imx: Add fsl,scu-iomux yaml file
dt-bindings: clk: imx: Add fsl,scu-clk yaml file
bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings
dt-bindings: arm: fsl: Add carrier for toradex,apalis-imx6q
dt-bindings: arm: fsl: Decrease the line length
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM and PDK2
dt-bindings: arm: fsl: add toradex,colibri-imx7s/d/d-emmc-iris/-v2
dt-bindings: arm: fsl: add imx93 11x11 evk board
dt-bindings: arm: fsl: correct 1g vs. 1gb in toradex,colibri-imx6ull-*
Link: https://lore.kernel.org/r/20220709082951.15123-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
dt-bindings: Changes for v5.20-rc1
These changes add clock, reset, memory client and power domain
definitions for various devices found on Tegra234 along with a few
device tree bindings for new hardware.
* tag 'tegra-for-5.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra-ccplex-cluster: Remove status from required properties
dt-bindings: Add headers for Host1x and VIC on Tegra234
dt-bindings: timer: Add Tegra186 & Tegra234 Timer
dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB 2.0 binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 AXI2APB binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB 1.0 binding
dt-bindings: memory: Add Tegra234 MGBE memory clients
dt-bindings: Add Tegra234 MGBE clocks and resets
dt-bindings: power: Add Tegra234 MGBE power domains
dt-bindings: Add headers for Tegra234 GPCDMA
Link: https://lore.kernel.org/r/20220708185608.676474-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- whitespace fixes
- replaced RTC indexes with constants
- gpio-key nodes aligned with dtschema
- fixed LED node for Orange Pi Win
- added OPP table for R40 CPU and thermal points
- updated I2C controller compatibles
- added compatibles for MBUS, D1 DE2 clocks, D1 USB
- enable internal HMIC bias on Pinephone
* tag 'sunxi-dt-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: pinephone: Enable internal HMIC bias
dt-bindings: arm: sunxi: Add several MBUS compatibles
dt-bindings: arm: sunxi: Default to the full MBUS binding
dt-bindings: usb: generic-ohci: Add Allwinner D1 compatible
dt-bindings: usb: generic-ehci: Add Allwinner D1 compatible
dt-bindings: usb: sunxi-musb: Add Allwinner D1 compatible
arm64: dts: allwinner: a100: Update I2C controller fallback
dt-bindings: i2c: mv64xxx: Add variants with offload support
ARM: dts: sun8i-r40: Add thermal trip points/cooling maps
ARM: dts: sun8i-r40: add opp table for cpu
ARM: dts: sun8i-r40: Add "cpu-supply" node for sun8i-r40 based board
arm64: dts: allwinner: a64: orangepi-win: Fix LED node name
dt-bindings: clock: Add compatible for D1 DE2 clocks
ARM: dts: allwinner: align gpio-key node names with dtschema
arm64: dts: allwinner: align gpio-key node names with dtschema
arm64: dts: allwinner: Use constants for RTC clock indexes
ARM: dts: sunxi: Use constants for RTC clock indexes
ARM: dts: sun5i: adjust whitespace around '='
Link: https://lore.kernel.org/r/Ysh8qRH0Q5Xv9Qhf@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Needed for the Rockchip driver.
|
|
Some fixes to follow DT spec.
MT6795:
- Big update of supported devices: cpu-map, L2 cache, PMU, watchdog,
MediaTek timer, Arm CCI, pincontroller
MT7622:
- Change WPS button to active low
MT8173:
- Add infracfg property to the IOMMU node (also for mt2712e)
- Add optional AXI clock to NOR Flash node
MT8183:
- add Medaitek CCI support
- add support for Smart Voltag Scaling (SVS)
- add GCE support to mutex
- Add panel default rotation to some chromebooks
- Add power supply to power domain so that SRAM for the GPU has power
MT8186:
- compatible added, DTS not yet ready.
MT8192:
- Add support for Acer Chromebook 514
MT8195:
- Add efuse node
- Enable USB wakeup support
- Add support for Acer Chromebook Spin 513
* tag 'v5.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (66 commits)
arm64: dts: mt8183: Add panel rotation
arm64: dts: mt7622: fix BPI-R64 WPS button
arm64: dts: mt8173: Fix nor_flash node
arm64: dts: mediatek: cherry: Add I2C-HID touchscreen on I2C4
arm64: dts: mediatek: cherry: Enable support for the SPI NOR flash
arm64: dts: mediatek: cherry: Enable MT6360 sub-pmic on I2C7
arm64: dts: mediatek: cherry: Enable T-PHYs and USB XHCI controllers
arm64: dts: mediatek: cherry: Enable I2C and SPI controllers
arm64: dts: mediatek: cherry: Document gpios and add default pin config
arm64: dts: mediatek: cherry: Add support for internal eMMC storage
arm64: dts: mediatek: cherry: Assign interrupt line to MT6359 PMIC
arm64: dts: mediatek: cherry: Add platform regulators layout and config
arm64: dts: mediatek: Introduce MT8195 Cherry platform's Tomato
dt-bindings: arm: mediatek: Add MT8195 Cherry Tomato Chromebooks
arm64: dts: mediatek: asurada: Add SPI NOR flash memory
arm64: dts: mediatek: asurada: Enable SCP
arm64: dts: mediatek: asurada: Enable MMC
arm64: dts: mediatek: asurada: Add SPMI regulators
arm64: dts: mediatek: asurada: Add MT6359 PMIC
arm64: dts: mediatek: asurada: Enable PCIe and add WiFi
...
Link: https://lore.kernel.org/r/b0d5b584-2693-73b3-79f6-3e2292f006ea@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add clocks and clock-names for MT7986.
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
Greg Kroah-Hartman
Sergiu Moga
Slawomir Stepien
Guenter Roeck
David S. Miller
Nandhini Srikandan
Krzysztof Kozlowski
Maxime Ripard
Dave Airlie
Ioana Ciornei
Sibi Sankar
Arnd Bergmann
Johnson Wang
Robert Marko
Wolfram Sang
Conor Dooley
Kamal Dasu
Bhupesh Sharma
Leo Yan
Jeff LaBundy
Rob Herring
Cixi Geng
Chanho Park
Seven Lee
Mark Brown
Peter Chiu