| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SPI peripheral device bindings need to reference spi-peripheral-props.yaml
in order to use various SPI controller specific properties. Otherwise,
the unevaluatedProperties check will reject any controller specific
properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220531220122.2412711-1-robh@kernel.org
|
|
TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.
It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.
It supports upto 720p resolution with 60 and 120 Hz refresh
rates.
Add dt-bingings for it.
Signed-off-by: Christopher Vollo <chris@renewoutreach.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-1-jagan@amarulasolutions.com
|
|
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck in
lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"
* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
net/af_packet: make sure to pull mac header
net: add debug info to __skb_pull()
net: CONFIG_DEBUG_NET depends on CONFIG_NET
stmmac: intel: Add RPL-P PCI ID
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
tipc: check attribute length for bearer name
ice: fix access-beyond-end in the switch code
nfp: remove padding in nfp_nfdk_tx_desc
ax25: Fix ax25 session cleanup problems
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
sfc/siena: fix considering that all channels have TX queues
socket: Don't use u8 type in uapi socket.h
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
net: ping6: Fix ping -6 with interface name
macsec: fix UAF bug for real_dev
octeontx2-af: fix error code in is_valid_offset()
wifi: mac80211: fix use-after-free in chanctx code
bonding: guard ns_targets by CONFIG_IPV6
tcp: tcp_rtx_synack() can be called from process context
...
|
|
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples.
The Apple PCIe host schema is missing 'power-domains' in the schema.
The example has 3 power domains. However, this is wrong too as actual
dts files have a single power domain and Sven confirmed 1 is correct.
Cc: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220531215815.2408477-1-robh@kernel.org
|
|
Update email address to the quicinc.com domain.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1654130923-18722-1-git-send-email-quic_sibis@quicinc.com
|
|
Update my email address from the defunct codeaurora.org domain to the
current quicinc.com domain.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1654118992-4026-1-git-send-email-quic_jhugo@quicinc.com
|
|
During the repository renaming from hte to timestamp, $id path was not
updated accordingly. This patch corrects $id path.
Fixes: af583852d2ef ("dt-bindings: Renamed hte directory to timestamp")
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a binding for the Sundance Polarberry board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-8-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sundance DSP Inc. (https://www.sundancedsp.com/) is a supplier of
high-performance DSP and FPGA processor boards and I/O modules.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-7-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a compatible for the icicle kit's reference design. This represents
the FPGA fabric's contents & is versioned to denote which release of the
reference design it applies to.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220509142610.128590-5-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull RTC updates from Alexandre Belloni:
"A new driver represents the bulk of the changes and then we get the
usual small fixes.
New driver:
- Renesas RZN1 rtc
Drivers:
- sun6i: Add nvmem support"
* tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: mxc: Silence a clang warning
rtc: rzn1: Fix a variable type
rtc: rzn1: Fix error code in probe
rtc: rzn1: Avoid mixing variables
rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
rtc: mt6397: check return value after calling platform_get_resource()
rtc: rzn1: fix platform_no_drv_owner.cocci warning
rtc: gamecube: Add missing iounmap in gamecube_rtc_read_offset_from_sram
rtc: meson: Fix email address in MODULE_AUTHOR
rtc: simplify the return expression of rx8025_set_offset()
rtc: pcf85063: Add a compatible entry for pca85073a
dt-binding: pcf85063: Add an entry for pca85073a
MAINTAINERS: Add myself as maintainer of the RZN1 RTC driver
rtc: rzn1: Add oscillator offset support
rtc: rzn1: Add alarm support
rtc: rzn1: Add new RTC driver
dt-bindings: rtc: rzn1: Describe the RZN1 RTC
rtc: sun6i: Add NVMEM provider
|
|
Pull i3c updates from Alexandre Belloni:
"Only clean ups and no functional change this cycle. A couple of yaml
conversions of the DT bindings, and a couple of code cleanups"
* tag 'i3c/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
MAINTAINERS: rectify entries for some i3c drivers after dt conversion
i3c: master: svc: fix returnvar.cocci warning
i3c/master: simplify the return expression of i3c_hci_remove()
dt-bindings: i3c: Convert snps,dw-i3c-master to DT schema
dt-bindings: i3c: Convert cdns,i3c-master to DT schema
|
|
Pull watchdog updates from Wim Van Sebroeck:
- Add MediaTek MT8186 support
- Add Mediatek MT7986 reset-controller support
- Add i.MX93 support
- Add watchdog driver for Sunplus SP7021
- Add SC8180X and SC8280XP compatibles
- Add Renesas RZ/N1 Watchdog driver and support for RZ/N1
- rzg2l_wdt improvements and fixes
- Several other improvements and fixes
* tag 'linux-watchdog-5.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
watchdog: Add Renesas RZ/N1 Watchdog driver
dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
watchdog: wdat_wdt: Stop watchdog when uninstalling module
watchdog: wdat_wdt: Stop watchdog when rebooting the system
watchdog: wdat_wdt: Using the existing function to check parameter timeout
dt-bindings: watchdog: da9062: add watchdog timeout mode
dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
watchdog: iTCO_wdt: Using existing macro define covers more scenarios
watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
watchdog: rti_wdt: Fix calculation and evaluation of preset heartbeat
dt-bindings: watchdog: uniphier: Use unevaluatedProperties
watchdog: sp805: disable watchdog on remove
watchdog: da9063: optionally disable watchdog during suspend
dt-bindings: mfd: da9063: watchdog: add suspend disable option
dt-bindings: watchdog: sunxi: clarify clock support
dt-bindings: watchdog: sunxi: fix F1C100s compatible
watchdog: Add watchdog driver for Sunplus SP7021
...
|
|
All existing vendor DTSes are using "cpm_slcr" reg followed by "cfg" reg.
This order is also suggested by node name which is pcie@fca10000 which
suggests that cpm_slcr register should be the first.
Driver itself is using devm_platform_ioremap_resource_byname() for both
names that's why there is no functional change even on description which
are using current order.
But still prefer to change order to cover currently used description.
Fixes: e22fadb1d014 ("PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port")
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220516102217.25960-1-bharat.kumar.gogada@xilinx.com
|
|
Pull pwm updates from Thierry Reding:
"Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations"
* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
pwm: pwm-cros-ec: Add channel type support
dt-bindings: google,cros-ec-pwm: Add the new -type compatible
dt-bindings: Add mfd/cros_ec definitions
pwm: Document that the pinstate of a disabled PWM isn't reliable
pwm: twl-led: Implement .apply() callback
pwm: lpc18xx: Implement .apply() callback
pwm: mediatek: Implement .apply() callback
pwm: lpc32xx: Implement .apply() callback
pwm: tegra: Implement .apply() callback
pwm: stmpe: Implement .apply() callback
pwm: sti: Implement .apply() callback
pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
pwm: tegra: Optimize period calculation
pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
pwm: renesas-tpu: Improve maths to compute register settings
pwm: renesas-tpu: Rename variables to match the usual naming
pwm: renesas-tpu: Implement .apply() callback
pwm: renesas-tpu: Make use of devm functions
pwm: renesas-tpu: Make use of dev_err_probe()
...
|
|
Pull remoteproc updates from Bjorn Andersson:
"This fixes a race condition in the user space interface for starting
and stopping remote processors, it makes the ELF loader properly skip
zero memsz segments and it cleans up the debugfs tracefile code a bit
by not checking for errors.
It introduces support for controlling the audio DSP on Qualcomm
MSM8226, as well as audio and compute DSPs on Qualcomm SC8280XP.
It makes it possible to specify the firmware path for Mediatek's
remote processors, fixes a double free in the SCP driver and addresses
an issue with the SRAM initialization on MT8195.
Lastly it deprecates the custom ELF loader in the iMX remoteproc
driver, in favor of using the shared one"
* tag 'rproc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (21 commits)
dt-bindings: remoteproc: mediatek: Add optional memory-region to mtk,scp
dt-bindings: remoteproc: mediatek: Make l1tcm reg exclusive to mt819x
dt-bindings: remoteproc: st,stm32-rproc: Fix phandle-array parameters description
remoteproc: imx_rproc: Support i.MX93
dt-bindings: remoteproc: imx_rproc: Support i.MX93
remoteproc: qcom: pas: Add MSM8226 ADSP support
dt-bindings: remoteproc: qcom: pas: Add MSM8226 adsp
remoteproc: mediatek: Allow reading firmware-name from DT
dt-bindings: remoteproc: mediatek: Add firmware-name property
remoteproc: qcom: pas: Add sc8280xp remoteprocs
dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair
dt-bindings: remoteproc: mediatek: Add interrupts property to mtk,scp
remoteproc: imx_rproc: Ignore create mem entry for resource table
remoteproc: core: Move state checking to remoteproc_core
remoteproc: core: Remove state checking before calling rproc_boot()
remoteproc: imx_dsp_rproc: Make rsc_table optional
remoteproc: imx_dsp_rproc: use common rproc_elf_load_segments
remoteproc: elf_loader: skip segment with memsz as zero
remoteproc: mtk_scp: Fix a potential double free
remoteproc: Don't bother checking the return value of debugfs_create*
...
|
|
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples. Fix the warnings by removing
spurious properties or adding a missing property to the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220526014204.2873107-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In the binding example, the regulator mode 4 is shown as a valid mode,
but the driver actually only support mode 0 to 2:
This generates an error in dmesg when copy/pasting the binding example:
[ 0.306080] vbuck1: invalid regulator-allowed-modes element 4
[ 0.307290] vbuck2: invalid regulator-allowed-modes element 4
This commit fixes this error by removing the invalid mode from the
examples.
Fixes: 977fb5b58469 ("regulator: document binding for MT6315 regulator")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220529154613.337559-1-fparent@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples. Fix the warnings by removing
spurious properties or adding missing properties to the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220526014149.2872762-1-robh@kernel.org
|
|
The Socionext interrupt controller internal to the the PCI block isn't
documented which causes warnings when unevaluatedProperties check is
also fixed. Add the 'interrupt-controller' child node and properties and
fixup the example so that interrupt properties can be parsed.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220525210117.2489333-1-robh@kernel.org
|
|
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples.
Some DWC3 implementations such as Xilinx are hooked up coherently and need
to set the 'dma-coherent' property.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220526014118.2872057-1-robh@kernel.org
|
|
The DT example incorrectly names the ISP power domain "isp1" instead of
"isp". This causes a validation failure:
Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.example.dtb: blk-ctl@32ec0000: power-domain-names:7: 'isp' was expected
From schema: Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
Fix it.
Fixes: 8b3dd27bfe47 ("dt-bindings: soc: Add i.MX8MP media block control DT bindings")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220510200543.13482-1-laurent.pinchart@ideasonboard.com
|
|
Pull LED updates from Pavel Machek:
"Most significant here is the driver for Qualcomm LPG. Apparently it
drives backlight on some boards, so it is quite important for some
people"
* tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: qcom-lpg: Require pattern to follow documentation
leds: lp50xx: Remove duplicated error reporting in .remove()
leds: qcom-lpg: add missing PWM dependency
leds: ktd2692: Make aux-gpios optional
dt-bindings: leds: convert ktd2692 bindings to yaml
leds: ktd2692: Avoid duplicate error messages on probe deferral
leds: is31fl32xx: Improve error reporting in .remove()
leds: Move pwm-multicolor driver into rgb directory
leds: Add PWM multicolor driver
dt-bindings: leds: Add multicolor PWM LED bindings
dt-bindings: leds: Optional multi-led unit address
leds: regulator: Make probeable from device tree
leds: regulator: Add dev helper variable
dt-bindings: leds: Add regulator-led binding
leds: pca9532: Make pca9532_destroy_devices() return void
leds: Add pm8350c support to Qualcomm LPG driver
dt-bindings: leds: Add pm8350c pmic support
leds: Add driver for Qualcomm LPG
dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
|
|
Pull i2c updates from Wolfram Sang:
"Only driver updates for 5.19.
Bigger changes are for Meson, NPCM, and R-Car, but there are also
changes all over the place"
* tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: meson: fix typo in comment
i2c: rcar: use flags instead of atomic_xfer
i2c: rcar: REP_AFTER_RD is not a persistent flag
i2c: rcar: use BIT macro consistently
i2c: qcom-geni: remove unnecessary conditions
i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
i2c: rcar: refactor handling of first message
i2c: rcar: avoid race condition with SMIs
i2c: xiic: Correct the datatype for rx_watermark
i2c: rcar: fix PM ref counts in probe error paths
i2c: npcm: Handle spurious interrupts
i2c: npcm: Correct register access width
i2c: npcm: Add tx complete counter
i2c: npcm: Fix timeout calculation
i2c: npcm: Remove unused variable clk_regmap
i2c: npcm: Change the way of getting GCR regmap
i2c: xiic: Fix Tx Interrupt path for grouped messages
i2c: xiic: Fix coding style issues
i2c: xiic: return value of xiic_reinit
i2c: cadence: Increase timeout per message if necessary
...
|
|
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
|
|
patternProperties should not be used for properties with a simple string
as name:
Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml: patternProperties:^(.*-edge|rpm)$:patternProperties:
'^rpm-requests$' should not be valid under {'pattern': '^\\^[a-zA-Z0-9,\\-._#]+\\$$'}
Fixes: 375eed5f51a8 ("dt-bindings: soc: qcom,smd: convert to dtschema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220524070408.39505-1-krzysztof.kozlowski@linaro.org
|
|
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
|
|
Merge OPP (Operating Performance Points) changes for 5.19-rc1:
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
* pm-opp:
opp: Reorder definition of ceil/floor helpers
opp: Add apis to retrieve opps with interconnect bandwidth
dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
opp: use list iterator only inside the loop
opp: replace usage of found with dedicated list iterator variable
PM: opp: simplify with dev_err_probe()
OPP: call of_node_put() on error path in _bandwidth_supported()
|
|
SoCFPGA dts updates for v5.19
- dtschema fix SPI NOR node
- correct dt-bindings doc for Altera gpio driver
- add support for n6000 Agilex platform and dt-bindings documentation
* tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: add device tree for n6000
dt-bindings: intel: add binding for Intel n6000
dt-bindings: soc: add bindings for Intel HPS Copy Engine
dt-bindings: gpio: altera: correct interrupt-cells
ARM: dts: socfpga: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220519232317.16079-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull dmaengine updates from Vinod Koul:
"Nothing special, this includes a couple of new device support and new
driver support and bunch of driver updates.
New support:
- Tegra gpcdma driver support
- Qualcomm SM8350, Sm8450 and SC7280 device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- deprecate '#dma-channels' & '#dma-requests' bindings
- driver updates for stm32, ptdma idsx etc"
* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
dmaengine: sun6i: Add support for the D1 variant
dmaengine: sun6i: Add support for 34-bit physical addresses
dmaengine: sun6i: Do not use virt_to_phys
dt-bindings: dma: sun50i-a64: Add compatible for D1
dmaengine: tegra: Remove unused switch case
dmaengine: tegra: Fix uninitialized variable usage
dmaengine: stm32-dma: add device_pause/device_resume support
dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
dmaengine: qcom: gpi: Add support for sc7280
dt-bindings: dma: pl330: Add power-domains
dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: ti: deprecate '#dma-channels'
dmaengine: mmp: deprecate '#dma-channels'
dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
...
|
|
Pull input updates from Dmitry Torokhov:
- a new driver for the Azoteq IQS7222A/B/C capacitive touch controller
- a new driver for Raspberry Pi Sense HAT joystick
- sun4i-lradc-keys gained support of R329 and D1 variants, plus it can
be now used as a wakeup source
- pm8941-pwrkey can now properly handle PON GEN3 variants; the driver
also implements software debouncing and has a workaround for missing
key press events
- assorted driver fixes and cleanups
* tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
Input: stmfts - do not leave device disabled in stmfts_input_open
Input: gpio-keys - cancel delayed work only in case of GPIO
Input: cypress_ps2 - fix typo in comment
Input: vmmouse - disable vmmouse before entering suspend mode
dt-bindings: google,cros-ec-keyb: Fixup bad compatible match
Input: cros-ec-keyb - allow skipping keyboard registration
dt-bindings: google,cros-ec-keyb: Introduce switches only compatible
Input: psmouse-smbus - avoid flush_scheduled_work() usage
Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare
Input: sparcspkr - fix refcount leak in bbc_beep_probe
Input: sun4i-lradc-keys - add support for R329 and D1
Input: sun4i-lradc-keys - add optional clock/reset support
dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles
Input: sun4i-lradc-keys - add wakeup support
Input: pm8941-pwrkey - simulate missed key press events
Input: pm8941-pwrkey - add software key press debouncing support
Input: pm8941-pwrkey - add support for PON GEN3 base addresses
Input: pm8941-pwrkey - fix error message
Input: synaptics-rmi4 - remove unnecessary flush_workqueue()
Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper
...
|
|
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
|
|
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
|
|
Devicetree specification expects nodes to have generic names, if
possible, so replace custom ones with something generic. For gpio-keys,
the more popular format is "key-xxx" instead of "xxx-key", so choose the
first one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220524093136.7980-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Update the dt-bindings maintainers section.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220526141318.77146-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
|
|
Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.
|
|
Prepare input updates for 5.19 merge window.
|
|
Pull MFD updates from Lee Jones:
"New Device Support
- Add support for {Power,Home} Keys to MediaTek MT6359
- Add support for SC2730 to Spreadtrum SPRD SC27XX SPI
- Add support for additional Alder Lake-P I2C Controllers to Intel
LPSS PCI
Fix-ups:
- Convert GPIO to GPIOD (hi655x-pmic)
- Only register devices that exist (cros_ec_dev)
- Remove unused code (syscon, reg-mux)
- Rework .remove() API to return void (twl-core, rt4831)
- Trivial - whitespace, spelling, coding style (tps65218,
sprd-sc27xx-spi, google,cros-ec)
- DT binding changes (samsung,exynos5433-lpass, rockchip,rk805,
rockchip,rk808, rockchip,rk809, rockchip,rk817, rockchip,rk818,
wlf,arizona)
Bug Fixes:
- Fix error handling bugs (ipaq-micro, davinci_voicecodec)"
* tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: cros-ec: Fix a typo in description
dt-bindings: mfd: wlf,arizona: Add spi-max-frequency
mfd: rt4831: Improve error reporting for problems during .remove()
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
mfd: intel-lpss: Add support for ADL-P i2c6 and i2c7
dt-bindings: mfd: rk808: Convert bindings to yaml
mfd: twl4030: Make twl4030_exit_irq() return void
mfd: twl6030: Make twl6030_exit_irq() return void
dt-bindings: mfd: samsung,exynos5433-lpass: Fix 'dma-channels/requests' properties
mfd: sprd: Jugle {of,spi}_device_id tables into numerical order
mfd: sprd: Add SC2730 PMIC to SPI device ID table
dt-bindings: Drop undocumented i.MX iomuxc-gpr bindings in examples
mfd: cros_ec_dev: Only register PCHG device if present
mfd: mt6397-core: Add resources for PMIC keys for MT6359
mfd: mt6359: Add missing defines necessary for mtk-pmic-keys support
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
mfd: hi655x-pmic: Replace legacy gpio interface for gpiod interface
mfd: tps65218: Fix trivial typo in comment
|
|
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
|
|
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
PCI: rockchip-dwc: Add legacy interrupt support
...
|
|
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull mailbox updates from Jassi Brar:
"api:
- hrtimer fix
qcom:
- log pending irq during resume
- minor cosmetic changes
omap:
- use pm_runtime_resume_and_get
imx:
- use pm_runtime_resume_and_get
- remove redundant initializer
mtk:
- added GCE header for MT8186
- enable support for MT8186
tegra:
- remove redundant NULL check
- added hsp_sm_ops for send/recv api
- support shared mailboxes
stm:
- remove unsupported "wakeup" irq
pcc:
- sanitize mbox allocated memory before use
misc:
- documentation fixes for arm_mhu and qcom-ipcc"
* tag 'mailbox-v5.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom-ipcc: Fix -Wunused-function with CONFIG_PM_SLEEP=n
mailbox: forward the hrtimer if not queued and under a lock
mailbox: qcom-ipcc: Log the pending interrupt during resume
mailbox: pcc: Fix an invalid-load caught by the address sanitizer
dt-bindings: mailbox: remove the IPCC "wakeup" IRQ
mailbox: correct kerneldoc
mailbox: omap: using pm_runtime_resume_and_get to simplify the code
mailbox:imx: using pm_runtime_resume_and_get
mailbox: mediatek: support mt8186 adsp mailbox
dt-bindings: mailbox: mtk,adsp-mbox: add mt8186 compatible name
mailbox: tegra-hsp: Add 128-bit shared mailbox support
dt-bindings: tegra186-hsp: add type for shared mailboxes
mailbox: tegra-hsp: Add tegra_hsp_sm_ops
dt-bindings: gce: add the GCE header file for MT8186
mailbox: remove an unneeded NULL check on list iterator
mailbox: imx: remove redundant initializer
dt-bindings: mailbox: qcom-ipcc: simplify the example
|
|
Pull gpio updates from Bartosz Golaszewski:
"We have lots of small changes all over the place, but no huge reworks
or new drivers:
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in
drivers
- make irqchips immutable due to the new warning popping up when
drivers try to modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar
and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x &
gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of
gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and
descriptors to gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core"
* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpio: sifive: Make the irqchip immutable
gpio: rcar: Make the irqchip immutable
gpio: pcf857x: Make the irqchip immutable
gpio: pca953x: Make the irqchip immutable
gpio: dwapb: Make the irqchip immutable
gpio: sim: Use correct order for the parameters of devm_kcalloc()
gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
gpio: ws16c48: Utilize iomap interface
gpio: gpio-mm: Utilize iomap interface
gpio: 104-idio-16: Utilize iomap interface
gpio: 104-idi-48: Utilize iomap interface
gpio: 104-dio-48e: Utilize iomap interface
gpio: zevio: drop of_gpio.h header
gpio: max77620: Make the irqchip immutable
dt-bindings: gpio: pca95xx: add entry for pca6408
gpio: pca953xx: Add support for pca6408
gpio: max732x: Drop unused support for irq and setup code via platform data
gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
...
|
|
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
|
|
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
|
|
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
|
|
Pull 32-bit ARM SoC updates from Arnd Bergmann:
"These updates are for platform specific code in arch/arm/, mostly
fixing minor issues.
The at91 platform gains support for better power management on the
lan966 platform and new firmware on the sama5 platform. The mediatek
soc drivers in turn are enabled for the new mt8195 SoC"
* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: at91: debug: add lan966 support
ARM: at91: pm: add support for sama5d2 secure suspend
ARM: at91: add code to handle secure calls
ARM: at91: Kconfig: implement PIT64B selection
ARM: at91: pm: add quirks for pm
ARM: at91: pm: use kernel documentation style
ARM: at91: pm: introduce macros for pm mode replacement
ARM: at91: pm: keep documentation inline with structure members
orion5x: fix typos in comments
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
ARM: shmobile: Drop commas after dt_compat sentinels
soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
MAINTAINERS: Add Broadcom BCMBCA entry
arm: bcmbca: add arch bcmbca machine entry
MAINTAINERS: Broadcom internal lists aren't maintainers
dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
soc: mediatek: add mtk-mutex support for mt8195 vdosys0
soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
...
|
|
From the kernel's perspective, (pre-CSF, "Job Manager") Valhall is more
or less compatible with Bifrost, although they differ to userspace. Add
a compatible for Valhall to the existing Bifrost bindings documentation.
As the first SoC with a Valhall GPU receiving mainline support, add a
specific compatible for the MediaTek MT8192, which instantiates a
Mali-G57.
v2: Change compatible to arm,mali-valhall-jm (Daniel Stone).
CC: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-2-alyssa.rosenzweig@collabora.com
|
Rob Herring
Jagan Teki
Linus Torvalds
Sibi Sankar
Jeffrey Hugo
Dipen Patel
Conor Dooley
Bharat Kumar Gogada
Fabien Parent
Laurent Pinchart
Krzysztof Kozlowski
Rafael J. Wysocki
Arnd Bergmann
Alexandru Tachici
Dmitry Torokhov
Alyssa Rosenzweig