| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Consumer examples in the bindings of resource providers are trivial,
useless and duplicating code. Additionally the incomplete qcom,smp2p
example triggers DT schema warnings.
Cleanup the example by removing the consumer part and fixing the
indentation to DT schema convention.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/2882a6de3905a57ae62d91060d27521af43c4068.1651497024.git.geert+renesas@glider.be
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Describe the WDT hardware in the RZ/N1 series.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220427135531.708279-2-jjhiblot@traphandler.com
[groeck: Rebased, fixed conflicts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Document the watchdog timeout mode property. If this property is used
the user can select what happens on watchdog timeout. Set this property
to 1 to enable SHUTDOWN (the device resets), set it to 0 and the device
will go to POWERDOWN on watchdog timeout.
If this property is not set, don't touch the WATCHDOG_SD bit and leave
the configuration to OTP. This way backward compatibility is not broken.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211206064732.280375-4-andrej.picej@norik.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Document RZ/G2UL WDT bindings. RZ/G2UL WDT is similar to one found
on the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-wdt" will be used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220424071323.151757-1-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add compatibles for the SC8180X and SC8280XP platforms to the Qualcomm
watchdog binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220408212854.581481-1-bjorn.andersson@linaro.org
[groeck: Rebased and resolved conflicts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This refers common bindings, so this is preferred for
unevaluatedProperties instead of additionalProperties.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1649317606-21267-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Document the watchdog disable option which can be used if the hardware
automatic suspend option is broken.
Based on commit c514430c51ee8 ("dt-bindings: watchdog: da9062: add
suspend disable option").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220422072713.3172345-1-primoz.fiser@norik.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
New compatible to manage clock and reset of STM32MP13 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20220516070600.7692-2-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
These four files are left over from the h8300 removal.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the Atmel (now Microchip) AT30TS74 which is an LM75 based
temperature sensor.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/9c01b1b5-871a-2b34-9f98-766d043e0759@axentia.se
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document the TMP401, TMP411 and TMP43x device devicetree bindings
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Camel Guo <camel.guo@axis.com>
Link: https://lore.kernel.org/r/20220414075824.2634839-2-camel.guo@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update google,cros-ec-pwm node documentation to mention the
google,cros-ec-pwm-type compatible as a valid alternative.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add binding documentation for the MT6795 Helio X10 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Renamed hte dt binding directory to timestamp according review comment.
Addressed minor comment about having HTE acronym first in the common dt
binding document.
The change reflects above renaming in MAINTAINERS files too.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Convert the rk808 bindings into yaml format. clock-output-names varies
in maxItems depending on whether or not the clock-cells is 0 or 1. For
the rk805, rk809, and rk817. This preserves behavior with the existing
driver handling setting the clock for these specific PMICs. When this
driver is corrected and the devicetrees updated this logic can be
removed (since the rk805, rk808, and rk817 only have one actual clock).
Note this patch was previously sent as a series, all of the patches in
the series except this one have been committed to mainline.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com
|
|
NAND core:
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
SPI NOR core changes:
- Read back written SR value to make sure the write was done correctly.
- Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
|
|
Linux 5.18-rc7
|
|
A device tree binding change for Rockchip VOP2
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519080556.42p52cya4u6y3kps@houat
|
|
The contents of the clock binding have been moved to the clock binding
schema in the dtschema repository. The desire is for common bindings to
be hosted in the dtschema repository.
Replace the contents with a link to the clock binding schema as there
are still many references to clock-bindings.txt in the tree. This will
prevent additions without a schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220428154154.2284317-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the binding string for the Agilex based Intel n6000 board.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add device tree bindings documentation for the Intel Hard
Processor System (HPS) Copy Engine.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add binding for the Qualcomm SC8280XP Global Clock controller.
The clock-names property is purposefully omitted, to clearly communicate
to the writer (and reader) of the DeviceTree source based on this
binding that the order of "clocks" is significant, in contrast to
previous GCC bindings.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220505025457.1693716-2-bjorn.andersson@linaro.org
|
|
While Linux uses a different driver, the Ilitek
ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Device Tree
binding documentation is very similar.
- Drop the fixed reg value, as some controllers use a different
address,
- Make reset-gpios optional, as it is not always wired.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/0c5f06c9d262c1720b40d068b6eefe58ca406601.1638539806.git.geert+renesas@glider.be
|
|
The DTS should always have fixed clock order, even if it comes with
clock-names property. Drop the pattern to make the order strict.
Existing DTS already match this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220424150333.75172-3-krzysztof.kozlowski@linaro.org
|
|
There is no need to add minItems when it is equal to maxItems.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220424150333.75172-2-krzysztof.kozlowski@linaro.org
|
|
There is no need to add minItems when it is equal to maxItems.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220424150333.75172-1-krzysztof.kozlowski@linaro.org
|
|
drivers/net/ethernet/mellanox/mlx5/core/main.c
b33886971dbc ("net/mlx5: Initialize flow steering during driver probe")
40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support")
f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table")
https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/
16d42d313350 ("net/mlx5: Drain fw_reset when removing device")
8324a02c342a ("net/mlx5: Add exit route when waiting for FW")
https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/
tools/testing/selftests/net/mptcp/mptcp_join.sh
e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
b6e074e171bc ("selftests: mptcp: add infinite map testcase")
5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/
net/mptcp/options.c
ba2c89e0ea74 ("mptcp: fix checksum byte order")
1e39e5a32ad7 ("mptcp: infinite mapping sending")
ea66758c1795 ("tcp: allow MPTCP to update the announced window")
https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/
net/mptcp/pm.c
95d686517884 ("mptcp: fix subflow accounting on close")
4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/
net/mptcp/subflow.c
ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure")
0348c690ed37 ("mptcp: add the fallback check")
f8d4bcacff3b ("mptcp: infinite mapping receiving")
https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
D1 has a DMA controller similar to the one in other Allwinner SoCs.
Add its compatible, and include it in the list of variants with a
separate MBUS clock gate.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220424172759.33383-2-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The pl330 DMA controller on Exynos SoC (e.g. dma-controller@3880000 in
Exynos5420) belongs to power domain, so allow such property.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220427064048.86635-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Georgi writes:
interconnect changes for 5.19
These are the interconnect changes for the 5.19-rc1 merge window
consisting of driver updates.
Driver changes:
- New driver for SC8280XP
- New driver for SDX65
- SC8180X driver fixes
- Constify various data structures in that are never modified
- Fix clock rate caching in RPM drivers.
- Misc fixes and clean-ups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: Remove sc7180/sdx55 ipa compatibles
interconnect: qcom: sc8180x: Reformat node and bcm definitions
interconnect: qcom: sc8180x: Mark some BCMs keepalive
interconnect: qcom: sc8180x: Fix QUP0 nodes
interconnect: qcom: sc8180x: Modernize sc8180x probe
dt-bindings: interconnect: Add SC8180X QUP0 virt provider
interconnect: qcom: icc-rpm: Cache every clock rate
interconnect: qcom: icc-rpm: Fix for cached clock rate
interconnect: qcom: sc8280xp: constify qcom_icc_bcm pointers
interconnect: qcom: sc8280xp: constify icc_node pointers
interconnect: qcom: sc8280xp: constify qcom_icc_desc
interconnect: qcom: Add SDX65 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SDX65 DT bindings
interconnect: qcom: constify qcom_icc_bcm pointers
interconnect: qcom: constify icc_node pointers
interconnect: qcom: constify qcom_icc_desc
interconnect: qcom: Add SC8280XP interconnect provider
dt-bindings: interconnect: qcom: Add sc8280xp binding
|
|
The generic properties, used in most of the drivers and defined in
generic dma-common DT bindings, are 'dma-channels' and 'dma-requests'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220503065407.52188-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Just like for the NAND controller that is also on this SoC, let's
provide a SoC generic and a more specific couple of compatibles for the
DMA controller.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220427095653.91804-4-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This system controller contains several registers that have nothing to
do with the clock handling, like the DMA mux register. Describe this
part of the system controller as a subnode.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220427095653.91804-3-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
dmamux register located in the system control area which can take up to
32 requests (16 per DMA controller). Each DMA channel can be wired to
two different peripherals.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220427095653.91804-2-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The RZ/V2M SoC has an additional clock to access the registers. The HW
manual says this clock should not be touched as it is used by the
"ISP Firmware".
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220512072649.7879-1-phil.edworthy@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Chanwoo writes:
Update extcon next for v5.19
Detailed description for this pull request:
1. update extcon core driver
- extcon_get_extcon_dev() has been almost used to get the extcon device
on booting time. If extcon provider driver is probed at late time,
the extcon consumer driver get the -EPROBE_DEFER return value.
It requires the inefficient handling code of -EPROBE_DEFER.
Instead, extcon_get_extcon_dev() will return -EPROBE_DEFER
if the required extcon device is none. It makes the extcon consumer driver
to be simplified when getting extcon device.
- Register device after dev_set_drvdata because of accessing
the sysfs attributes at timing of between drv_set_data and device_register.
- Fix some kernel-doc comments of extcon functions.
2. update extcon provider driver
- Update extcon-intel-int3496.c
: Add support for controlling vbus power via regulator and support
to the extcon-intel-int3496.c driver to bind to devices without
an ACPi companion. And fix the minor clean-up.
- Use struct_size() helper on extcon-usbc-cros-ec.c
- Remove the disable irq operation in system sleep for using vbus/id
gpio as the wakeup source on extcon-usb-gpio.c
- Add support of SM5703 device by using existing extcon-sm5502.c
and rename i2c_devic_id from sm5703 to sm5703-muic to reduce confusion
between SM5703 MFD device and extcon device.
- Add usb role class support and add queue work sync before driver release
on extcon-ptn5150.c
* tag 'extcon-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: Modify extcon device to be created after driver data is set
extcon: sm5502: Clarify SM5703's i2c device ID
extcon: ptn5150: Add usb role class support
extcon: ptn5150: Add queue work sync before driver release
extcon: sm5502: Add support for SM5703
dt-bindings: extcon: bindings for SM5703
extcon: usb-gpio: Remove disable irq operation in system sleep
extcon: Fix some kernel-doc comments
extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()
extcon: int3496: Add support for controlling Vbus through a regulator
extcon: int3496: Add support for binding to plain platform devices
extcon: int3496: Request non-exclusive access to the ID GPIO
extcon: int3496: Make the driver a bit less verbose
extcon: Fix extcon_get_extcon_dev() error handling
|
|
Vinod writes:
soundwire updates for 5.19-rc1
- Support for v1.6.0 Qualcomm controllers
- Bunch of pm updates by Intel for peripheral attachment and system pm
etc
* tag 'soundwire-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: qcom: adjust autoenumeration timeout
soundwire: qcom: use pm_runtime_resume_and_get()
soundwire: intel: use pm_runtime_resume_and_get()
soundwire: cadence: use pm_runtime_resume_and_get()
soundwire: bus: use pm_runtime_resume_and_get()
soundwire: qcom: return error when pm_runtime_get_sync fails
soundwire: bus: pm_runtime_request_resume on peripheral attachment
soundwire: intel: disable WAKEEN in pm_runtime resume
soundwire: intel: prevent pm_runtime resume prior to system suspend
soundwire: cadence: recheck device0 attachment after status change
dt-bindings: soundwire: qcom: Add bindings for audio clock reset control property
soundwire: qcom: Add compatible name for v1.6.0
soundwire: stream: Fix error return code in do_bank_switch()
soundwire: qcom: fix an error message in swrm_wait_for_frame_gen_enabled()
|
|
Vinod writes:
phy-for-5.19
- New support:
- LVDS configuration support and implementation in fsl driver
- Qualcomm UFS phy support for SM6350 and USB PHY for SDX65
- Allwinner D-PHY Rx mode support
- Yamilfy Mixel mipi-dsi-phy
- Updates:
- Documentation for phy ops order
- Can transceiver mux support
- Qualcomm QMP phy updates
- Uniphier phy updates
* tag 'phy-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
phy: qcom-qmp: rename error labels
phy: qcom-qmp: fix pipe-clock imbalance on power-on failure
phy: qcom-qmp: switch to explicit reset helpers
phy: qcom-qmp: fix reset-controller leak on probe errors
phy: qcom-qmp: fix struct clk leak on probe errors
dt-bindings: phy: renesas,usb2-phy: Document RZ/G2UL phy bindings
dt-bindings: phy: marvell,armada-3700-utmi-host-phy: Fix incorrect compatible in example
phy: qcom-qmp: fix phy-descriptor kernel-doc typo
phy: rockchip-inno-usb2: Clean up some inconsistent indenting
phy: freescale: imx8m-pcie: Handle IMX8_PCIE_REFCLK_PAD_UNUSED
phy: core: Warn when phy_power_on is called before phy_init
phy: core: Update documentation syntax
phy: core: Add documentation of phy operation order
phy: rockchip-inno-usb2: Handle ID IRQ
phy: rockchip-inno-usb2: Handle bvalid falling
phy: rockchip-inno-usb2: Support multi-bit mask properties
phy: rockchip-inno-usb2: Do not lock in bvalid IRQ handler
phy: rockchip-inno-usb2: Do not check bvalid twice
phy: rockchip-inno-usb2: Fix muxed interrupt support
phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2
...
|
|
Jonathan writes:
First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
iio: ti-ads8688: use of_device_id for OF matching
iio: stmpe-adc: use of_device_id for OF matching
dt-bindings: iio: Fix incorrect compatible strings in examples
iio: gyro: mpu3050: Make mpu3050_common_remove() return void
iio: dac: ltc2632: Make use of device properties
iio: temperature: max31865: Make use of device properties
iio: proximity: mb1232: Switch to use fwnode_irq_get()
iio: imu: adis16480: Improve getting the optional clocks
iio: imu: adis16480: Use temporary variable for struct device
iio: imu: adis16480: Make use of device properties
staging: iio: ad2s1210: remove redundant assignment to variable negative
iio: adc: sc27xx: add support for PMIC sc2730
iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
iio: adc: sc27xx: refactor some functions for support more PMiCs
iio: adc: sc27xx: structure adjustment and optimization
iio: adc: sc27xx: Fine tune the scale calibration values
iio: adc: sc27xx: fix read big scale voltage not right
dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
iio: proximity: stk3310: Export near level property for proximity sensor
dt-bindings: iio: light: stk33xx: Add proximity-near-level
...
|
|
'wakeup-parent' is a single phandle and not an array, so 'maxItems' is
wrong. Drop it.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220519011210.170022-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add devicetree and pinfunc bindings for MediaTek Helio X10 MT6795.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517083957.11816-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add i.MXRT1170 pinctrl binding Documentation
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517032802.451743-5-Mr.Bossman075@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
RK3588 can have 10 different device functions, so increase the maximum
amount appropriately. Considering rockchip uses auto-generated pinmux
files, adding a quite complex if construct to increase the limit just
for rk3588 does not seem to be worth the effort.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504213251.264819-19-sebastian.reichel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'gpio-reserved-ranges' property is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
qrb5165-rb5.dtb: gpio@c000: 'gpio-reserved-ranges' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220508135932.132378-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'input-disable' is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: gpio@c000: lt9611-rst-state: 'oneOf' conditional failed, one must be fixed:
'input-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
'function', 'input-disable', 'output-high', 'pins', 'power-source' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add missing 'gpio-line-names' property and describe its constraints for
all models except PM8226 (which seems not really used).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dtb: gpios@c000: divclk4-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'pinconf' does not match any of the regexes: 'pinctrl-[0-9]+'
[[2]] is not of type 'object'
Make the schema stricter and expect such nodes to be either named
'pinconfig' or followed with '-pins' prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
Krzysztof Kozlowski
Geert Uytterhoeven
Jean-Jacques Hiblot
Andrej Picej
Biju Das
Bjorn Andersson
Kunihiko Hayashi
Primoz Fiser
Gabriel Fernandez
Arnd Bergmann
Peter Rosin
Camel Guo
Fabio Baltieri
AngeloGioacchino Del Regno
Dipen Patel
Chris Morgan
Miquel Raynal
Joerg Roedel
Dave Airlie
Rob Herring
Matthew Gerlach
Jakub Kicinski
Samuel Holland
Greg Kroah-Hartman
Phil Edworthy
Jesse Taube
Sebastian Reichel