aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2016-06-29pinctrl: qcom: msm8974: Add hsic_ctl pinmuxStephen Boyd1-1/+4
The msm8974 pinctrl variant has a couple USB HSIC "glue" registers that let us mux between the pinctrl register settings or the HSIC core settings for the HSIC pins (gpio 144 and gpio 145). Support this method of operation by adding hsic_data and hsic_strobe pins that can select between hsic_ctl and gpio functions. This allows us to toggle the hsic pin configuration over to the HSIC core at runtime. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29dt-bindings: pinctrl: Add MDM9615 TLMM bindingsNeil Armstrong1-0/+152
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: Broadcom NSP pinctrl device tree bindingsYendapally Reddy Dhananjaya Reddy1-0/+79
Device tree binding documentation for Broadcom NSP IOMUX driver Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29Merge tag 'sh-pfc-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into develLinus Walleij1-1/+1
pinctrl: sh-pfc: Updates for v4.8 - Voltage switching support for R-Car H3, - DRIF pin support for R-Car H3, - Cleanups and fixes.
2016-06-29devicetree/bindings: Add binding for operator panel on FSP machinesSuraj Jitindar Singh1-0/+14
Add a binding to Documentation/devicetree/bindings/powerpc/opal (oppanel-opal.txt) for the operator panel which is present on IBM Power Systems machines with FSPs. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-28Merge tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-nextStephen Boyd1-3/+4
Pull support for Renesas R-car M3-W from Geert Uytterhoeven: Add initial support for the Clock Pulse Generator and Module Standby and Software Reset modules on the Renesas R-Car M3-W SoC: - Basic core clocks, - SCIF2 (console) module clock, - INTC-AP (GIC) module clock. * tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: cpg-mssr: Add support for R-Car M3-W clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code clk: renesas: Add r8a7796 CPG Core Clock Definitions clk: renesas: cpg-mssr: Document r8a7796 support
2016-06-28spi: Fix typo in devicetree/bindings/spiMasanari Iida2-2/+2
This patch fix spelling typos found in Documentation/devicetree/bingings/spi. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-28max8903: adds documentation for device tree bindings.Chris Lapa1-0/+25
Signed-off-by: Chris Lapa <chris@lapa.com.au> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-06-28ARM: dt-bindings: add device tree bindings for Hi3519 sysctrlJiancheng Xue1-0/+14
Add device tree bindings for Hi3519 system controller. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-06-28[media] cec: s5p-cec: Add s5p-cec driverKamil Debski1-0/+31
Add CEC interface driver present in the Samsung Exynos range of SoCs. The following files were based on work by SangPil Moon: - exynos_hdmi_cec.h - exynos_hdmi_cecctl.c Signed-off-by: Kamil Debski <kamil@wypas.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28net: davinci_mdio: introduce "ti,cpsw-mdio" compat stringGrygorii Strashko1-0/+1
Introduce "ti,cpsw-mdio" compatible string for Davinci MDIO, because it's required to distinguish the case when MDIO is part of TI CPSW to enable features supported by TI CPSW (for example, enable PM management). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: davinci_mdio: document missed "ti, am4372-mdio" compat stringGrygorii Strashko1-1/+3
Document missed "ti,am4372-mdio" compat string used for TI am437x SoC (am4372.dtsi). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28drivers: net: stmmac: add port selection programmingGiuseppe CAVALLARO1-0/+3
In case of SGMII more, for example when a MAC2MAC connection is needed, the port selection bits (inside the MAC configuration registers) have to be programmed according to the link selected. So the patch adds a new DT parameter to pass the port selection and to programmed related PCS and CORE to use it. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28dt-bindings: clocksource: Add Oxford Semiconductor RPS Timer bindingsNeil Armstrong1-0/+17
Add DT bindings for the Oxford Semiconductor RPS dual Timer. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
2016-06-28dt-bindings: Document rk3399 rk-timer bindingsHuang Tao1-2/+4
Add a compatible string for rk3399 SoC because the timer is slightly different from the older SoCs. So rename the file name from rockchip,rk3288-timer.txt to rockchip,rk-timer.txt and clarify rockchip,rk3288-timer supported SoCs. Signed-off-by: Huang Tao <huangtao@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-27iio: ad5755: Add DT binding documentationSean Nyekjaer1-0/+124
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-27ARM: dts: rockchip: add support rk3229 evb boardXing Zheng1-0/+3
Initial release for rk3229 evb board, and turn the GMAC on. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-27ASoC: cs35l33: Add device tree bindings file for cs35l33Paul Handrigan1-0/+126
Add device tree bindings file for the cs35l33 8V boosted class D amplifier. Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-27dt-binding: remoteproc: Introduce Hexagon loader bindingBjorn Andersson1-0/+137
This document defines the binding for a component that loads firmware and control the life cycle of a self-authenticating Qualcomm Hexagon core. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-27Merge tag 'linux-can-next-for-4.8-20160623' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-nextDavid S. Miller1-7/+14
Marc Kleine-Budde says: ==================== pull-request: can-next 2016-06-17 this is a pull request of 4 patches for net-next/master. Arnd Bergmann's patch fixes a regresseion in af_can introduced in linux-can-next-for-4.8-20160617. There are two patches by Ramesh Shanmugasundaram, which add CAN-2.0 support to the rcar_canfd driver. And a patch by Ed Spiridonov that adds better error diagnoses messages to the Ed Spiridonov driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27Documentation: devicetree: bindings: Add BCM5301x bindingFlorian Fainelli1-1/+2
Document the binding used by the Broadcom BCM5301x (Northstar) SoC random number generator. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-27leds: documentation: 'ide-disk' to 'disk-activity'Stephan Linz2-3/+5
Signed-off-by: Stephan Linz <linz@li-pro.net> Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-26net: stmmac: dwmac-rk: add rk3228-specific dataXing Zheng1-1/+2
Add constants and callback functions for the dwmac on rk3228/rk3229 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-26regulator: qcom_spmi: Update mvs1/mvs2 switches on pm8941Stephen Boyd1-1/+1
The mvs1 and mvs2 switches are actually called 5vs1 and 5vs2 on some datasheets. Let's rename them to match the datasheets and also match the RPM based regulator driver which calls these by their 5vs names (see qcom_smd-regulator.c). There aren't any users of these regulators so far, so there aren't any concerns of DT ABI breakage here. While we're here making updates to the switches, also mandate usage of the OCP irq for these switches too. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-26regulator: qcom_spmi: Add support for S4 supply on pm8941Stephen Boyd1-2/+2
The S4 supply is sometimes called the boost regulator because it outputs 5V. Typically it's connected to the 5vs1 and 5vs2 switches for use in USB OTG and HDMI applications. Add support for this regulator which was mistakenly left out from the initial submission of this driver. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-25tty/serial/8250: use mctrl_gpio helpersYegor Yefremov1-0/+19
This patch permits the usage for GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25serial: sh-sci: Document SoC specific bindings for r8a7796Hiromitsu Yamasaki1-0/+2
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25serial: sh-sci: Update DT binding documentation for dedicated RTS/CTSGeert Uytterhoeven1-0/+2
Some Renesas SCIF UARTs have dedicated lines for RTS/CTS hardware flow control. Whether these lines exist depends on SoC and UART instance inside the SoC. Whether these lines can be used for hardware flow control depends on board wiring. Amend the DT bindings with an optional property to indicate that RTS/CTS hardware flow control lines exist, and can be used as such, according to the Generic Serial DT Bindings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25serial: sh-sci: Update DT binding documentation for GPIO modem linesGeert Uytterhoeven1-0/+2
Amend the DT bindings for the Renesas SCI driver to allow describing optional GPIO-controlled modem lines, which can be used where dedicated modem lines are not available. The property naming is dictated by the Generic Serial DT Bindings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25tpm/tpm_tis_spi: Add support for spi phyChristophe Ricard1-0/+24
Spi protocol standardized by the TCG is now supported by most of TPM vendors. It supports SPI Bit Protocol as describe in the TCG PTP specification (chapter 6.4.6 SPI Bit Protocol). Irq mode is not supported. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25devicetree: Add Trusted Computing Group to vendor-prefix.txtChristophe Ricard1-0/+1
Add missing vendor to vendor-prefix.txt. Trusted Computing Group design common specifications for TPM (Trusted Platform Module) vendors. TCG designates a TPM answering to a public specification. This commit is based on the initial work by Peter Huewe. Cc: devicetree@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25devicetree: Add infineon to vendor-prefix.txtChristophe Ricard1-0/+1
Add missing vendor to vendor-prefix.txt This commit is based on the initial work by Peter Huewe. Cc: devicetree@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-24soc: qcom: Update properties for smem state referencingBjorn Andersson2-4/+4
Update the property names to match device tree bindings, the correct values should be qcom,smem-states and qcom,smem-state-names. Also update the #qcom,smem-state-cells for consistency, before we merge any users of these properties. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24Documentation: dt: socfpga: Add Arria10 Ethernet bindingThor Thayer1-0/+24
Add the device tree bindings needed to support the Altera Ethernet FIFO buffers on the Arria10 chip. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-6-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-24Merge tag 'mediatek-drm-2016-06-20' of git://git.pengutronix.de/git/pza/linux into drm-nextDave Airlie2-0/+149
MT8173 HDMI support - device tree binding documentation for MT8173 HDMI encoder, CEC, DDC, and PHY - drivers for MT8173 HDMI encoder, CEC (HPD only for now), DDC, and PHY - enable HDMI output via a custom SMCCC call - add ddc-i2c-bus property to HDMI connector device tree binding * tag 'mediatek-drm-2016-06-20' of git://git.pengutronix.de/git/pza/linux: dt-bindings: hdmi-connector: add DDC I2C bus phandle documentation drm/mediatek: enable hdmi output control bit drm/mediatek: Add HDMI support dt-bindings: drm/mediatek: Add Mediatek HDMI dts binding
2016-06-24Merge tag 'drm-sii902x' of github.com:bbrezillon/linux-at91 into drm-nextDave Airlie1-0/+35
Add basic support for the sii902x RGB -> HDMI bridge. * tag 'drm-sii902x' of github.com:bbrezillon/linux-at91: drm/bridge: Add sii902x DT bindings doc drm/bridge: Add sii902x driver
2016-06-23ASoC: cs53l30: Add MUTE pin control support via GPIONicolin Chen1-0/+4
The codec chip has a physical MUTE pin to let users control it via GPIO. So this patch add a mute control support to the driver. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-23regulator: pwm: Support for enable GPIOAlexandre Courbot1-1/+6
Add an optional enable GPIO to the pwm-regulator driver. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-23can: rcar_canfd: Add Classical CAN only mode supportRamesh Shanmugasundaram1-7/+14
The controller can operate in one of the two global modes - CAN FD only mode (default) - Classical CAN (CAN2.0) only mode This patch adds support for Classical CAN only mode. It can be enabled by defining the optional device tree property "renesas,no-can-fd" of this node. Note: R-Car Gen3 h/w manual v0.51E shows bit6 of RSCFDnCFDGCFG as reserved, which is incorrect. This bit is same as RSCFDnGCFG. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-22clk: gxbb: Document bindings for the GXBB clock controllerMichael Turquette1-0/+36
Add documentations for the clock controller. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-06-22doc/devicetree: Add Aspeed VIC bindingsJoel Stanley1-0/+22
Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/1463064193-2178-2-git-send-email-joel@jms.id.au Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-06-22ASoC: rt5514: Add the MCLK handlingOder Chiou1-0/+5
The patch adds the control of MCLK that depends on the status of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-22spi: Improve DT binding documentationGeert Uytterhoeven1-17/+18
- Add missing verbs and periods, - Add spaces before opening parentheses, - Align list layout, - Correct grammar, - Move "cs-gpios" from the required to the optional properties section, - Remove spaces before tabs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21documentation: iommu: Add bindings for msm,iommu-v0 ipSricharan R1-0/+64
The MSM IOMMU is an implementation compatible with the ARM VMSA short descriptor page tables. It provides address translation for bus masters outside of the CPU, each connected to the IOMMU through a port called micro-TLB. Adding the DT bindings for the same. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-21dt-bindings: mediatek: add descriptions for mediatek mt2701 iommu and smiHonghui Zhang3-8/+30
This patch defines the local arbitor port IDs for mediatek SoC MT2701 and add descriptions of binding for mediatek generation one iommu and smi. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-21Documentation: add DT bindings for ARM SCPI power domainsSudeep Holla1-0/+34
The System Control Processor (SCP) provides peripheral devices with power domains that can be enabled and disabled viathe System Control and Power Interface (SCPI) Message Protocol. Add bindings to allow probing of these device power domians. Cc: Rob Herring <robh+dt@kernel.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Jon Medhurst <tixy@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Jon Medhurst <tixy@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-21clk: renesas: mstp: Document R8A7792 supportSergei Shtylyov1-0/+1
Renesas R8A7792 SoC also has the CPG MSTP clocks... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-06-21clk: renesas: rcar-gen2: Document R8A7792 supportSergei Shtylyov1-0/+1
Renesas R8A7792 SoC is a member of the R-Car gen2 family and so has CPG... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-06-21extcon: arizona: Update binding docs to mention new defines for GPSWCharles Keepax1-1/+2
Update the binding documentation to mention the defines added for the possible values of wlf,gpsw. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21dt-bindings: ci-hdrc-usb2: s/gadget-itc-setting/itc-setting in exampleJisheng Zhang1-1/+1
What the code expect is "itc-setting" rather than "gadget-itc-setting", and this is also correctly described in the optional properties. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Rob Herring <robh@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.