| Age | Commit message (Collapse) | Author | Files | Lines |
|
Document the compatible for tcsr found in msm8953.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220112194118.178026-4-luca@z3ntu.xyz
|
|
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This adds support for I2S/TDM links where the slot width varies
depending on the sample width, in a way that cannot be guessed by
component hw_params().
A typical example is:
- 16-bit samples use 16-bit slots
- 24-bit samples use 32-bit slots
There is no way for a component hw_params() to deduce from the information
it is passed that 24-bit samples will be in 32-bit slots.
Some audio hardware cannot support a fixed slot width or a slot width
equal to the sample width in all cases. This is usually due either to
limitations of the audio serial port or system clocking restrictions.
|
|
Convert Tegra timer binding into yaml format.
This commit also merge 3 text bindings with almost
identical content (differens in number of registers).
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20220303233307.61753-1-david@ixit.cz
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add devicetree binding documentation for amphion
Video Processing Unit IP presents on NXP i.MX8Q
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Even yet more V4L2 patches for 5.18
* tag 'for-5.18-2.6-signed' of git://linuxtv.org/sailus/media_tree:
media: i2c: Fix pixel array positions in ov8865
media: adv7183: Convert to GPIO descriptors
media: m5mols: Convert to use GPIO descriptors
media: noon010p30: Convert to use GPIO descriptors
media: mt9m111: Drop unused include
media: adv7511: Drop unused include
media: i2c: isl7998x: Add driver for Intersil ISL7998x
media: dt-bindings: Add Intersil ISL79987 DT bindings
media: media-entity: Clarify media_entity_cleanup() usage
media: i2c: imx274: Drop surplus includes
media: i2c: ccs: Drop unused include
v4l: fwnode: Remove now-redundant loop from v4l2_fwnode_parse_reference()
v4l: fwnode: Drop redunant -ENODATA check in property reference parsing
media: media-entity: Simplify media_pipeline_start()
media: media-entity: Add media_pad_is_streaming() helper function
media: Add a driver for the og01a1b camera sensor
media: i2c: ov5648: Fix lockdep error
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Tag branch
* tag 'br-v5.18q' of git://linuxtv.org/hverkuil/media_tree:
media: cec: seco: Drop pointless include
media: hantro: sunxi: Fix VP9 steps
media: imx: csis: Store pads format separately
doc: media: Document VP9 reference_mode miss-placement
doc: media: Document MM21 tiled format
media: imx: imx8mq-mipi-csi2: Remove YUV422 2X8
media: v4l2-core: Initialize h264 scaling matrix
media: imx: imx-mipi-csis: Add output format
media: imx: imx-mipi-csis: Add BGR888
media: imx: imx-mipi-csis: Add RGB565_1X16
media: imx: imx-mipi-csis: Set PIXEL_MODE for YUV422
media: imx: imx7-media-csi: Use dual sampling for YUV 1X16
media: imx: Rename imx7-mipi-csis.c to imx-mipi-csis.c
media: imx: De-stage imx7-mipi-csis
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add bindings for the MAX77714 PMIC with GPIO, RTC and watchdog.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
When running dt_binding_check on the nvidia,tegra210-quad.yaml binding
document the following error is reported ...
nvidia,tegra210-quad.example.dt.yaml:0:0: /example-0/spi@70410000/flash@0:
failed to match any schema with compatible: ['spi-nor']
Update the example in the binding document to fix the above error.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 9684752e5fe3 ("dt-bindings: spi: Add Tegra Quad SPI device tree binding")
Link: https://lore.kernel.org/r/20220307113529.315685-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Han Xu as flexspi maintainer.
Also, update my email address as previous one is not working anymore.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220302192915.6193-1-singh.kuldeep87k@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a DT schema for describing Awinic AW8738 audio amplifiers. They are
fairly simple and controlled using a single GPIO. The number of pulses
during power up selects one of a few pre-defined operation modes. This
can be used to configure the speaker-guard function (primarily the
power limit for the amplifier).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220304102452.26856-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some audio hardware cannot support a fixed slot width for all sample
widths, or a slot width equal to the sample width for all sample widths.
This is usually due either to limitations of the audio serial port or
system clocking restrictions.
This property allows setting a mapping of sample widths and the
corresponding tdm slot widths. The slot count is also provided for
each slot width - although this would almost always be the same for
all slot widths this allows for possibly adding extra padding slots
to maintain a fixed bitclock frequency.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220228172754.453783-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the MFD part of Maxim MAX77802 PMIC to DT schema format. The
example DTS was copied from existing DTS (exynos5800-peach-pi.dts), so
keep the license as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220215075344.31421-3-krzysztof.kozlowski@canonical.com
|
|
Convert the regulators of Maxim MAX77802 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220215075344.31421-2-krzysztof.kozlowski@canonical.com
|
|
Convert the MFD part of Maxim MAX14577/MAX77836 MUIC to DT schema
format. The example DTS was copied from existing DTS
(exynos3250-rinato.dts), so keep the license as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220215074759.29402-4-krzysztof.kozlowski@canonical.com
|
|
Convert the regulator bindings of Maxim MAX14577/MAX77835 MUIC to DT
schema format. The existing bindings were defined in
../bindings/mfd/max14577.txt.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220215074759.29402-3-krzysztof.kozlowski@canonical.com
|
|
Convert the Charger bindings of Maxim MAX14577/MAX77836 MUIC to DT
schema format. The existing bindings were defined in
../bindings/mfd/max14577.txt.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220215074759.29402-2-krzysztof.kozlowski@canonical.com
|
|
Correct level of indentation in the example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220124082347.32747-4-krzysztof.kozlowski@canonical.com
|
|
The ChromeOS Embedded Controller appears on boards with Samsung Exynos
SoC, where Exynos SPI bindings expect controller-data node. Reference
SPI peripheral bindings which include now Samsung SPI peripheral parts.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220124082347.32747-3-krzysztof.kozlowski@canonical.com
|
|
Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) SPI
controller bindings to DT schema format.
The conversion also drops requirement from providing controller-data and
its data for each of SPI peripheral device nodes. The dtschema cannot
express this and the requirement is being relaxed in the driver now.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220124082347.32747-2-krzysztof.kozlowski@canonical.com
|
|
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.
Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the bindings for MAX77843 MFD driver, based on Exynos5433 TM2
devicetree. These are neither accurate nor finished bindings but at
least allow parsing existing DTS files.
The example DTS was copied from existing DTS
(exynos5433-tm2-common.dtsi), so keep the license as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220111174805.223732-5-krzysztof.kozlowski@canonical.com
|
|
Document the bindings for MAX77843 regulator driver. The bindings are
almost identical to MAX77693 bindings, except the actual names of
regulators.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220111174805.223732-4-krzysztof.kozlowski@canonical.com
|
|
Document the bindings for MAX77843 MUIC/extcon driver, based on
Exynos5433 TM2 devicetree. These are neither accurate nor finished
bindings but at least allow parsing existing DTS files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220111174805.223732-3-krzysztof.kozlowski@canonical.com
|
|
CSI-2 (CSI4LNK0) on R-Car and RZ/G2 supports 4-lane mode which is already
handled by rcar-csi2.c driver. This patch updates the data-lanes property
to describe the same.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add in missing vdda-phy-supply and vdda-pll-supply declarations. The
sm8250 USB, PCIe, UFS, DSI and CSI PHYs use a common set of vdda rails.
Define the CSI vdda regulators in the same way the qmp PHY does.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If we review the schematic for RB3 Thundercomm document Turbox-845 we see
that the CAMSS CSI PHY has the same basic power-rail layout as UFS, PCIe
and USB PHYs.
We should therefore have two regulator declarations as is the case for UFS,
PCIe and USB.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The i.MX8M mini appears to have a similar G1 decoder but the
post-processing isn't present, so different compatible flag is required.
Since all the other parameters are the same with imx8mq, just add
the new compatible flag to nxp,imx8mq-vpu.yaml.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The G1 and G2 are independent and separate decoder blocks
that are enabled by the vpu-blk-ctrl power-domain controller,
which now has a proper driver.
Because these blocks only share the power-domain, and can be
independently fused out, update the bindings to support separate
nodes for the G1 and G2 decoders with vpu-blk-ctrl power-domain
support.
The new DT + old kernel isn't a supported configuration.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add the bindings for the Amlogic Secure power domains, controlling the
secure power domains.
The bindings targets the Amlogic s4, in which the power domains registers
are in secure world.
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220307025357.1368673-2-shunzhou.jiang@amlogic.com
|
|
This patch add devicetree bindings for Mediatek matrix keypad driver.
Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220303154302.252041-2-mkorpershoek@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Realtek rtl8365mb DSA driver can use these two tag formats.
Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While the DT Spec says 'cpu-release-addr' is always 64-bit, some 32-bit Arm
DTs used a 32-bit value. We're now stuck with those cases, so add uint32 as
a valid type.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220303165710.1859862-1-robh@kernel.org
|
|
Some Injoinic power bank ICs feature an I2C interface which allows
monitoring and controlling the battery charger and boost converter.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add prefix for Injoinic Technology Corp. (http://www.injoinic.com/)
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
To improve the inner resistance measurement of the battery we need
to account for the line impedance of the connector to the battery.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Update dt-binding document for GPIO interrupt controller of Meson-S4 SoCs
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-2-qianggui.song@amlogic.com
|
|
Add the clock dt-binding file for i.MX93.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
Add imx8dxl scu clock support.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220222082140.2073629-1-abel.vesa@nxp.com
|
|
Extend dt-bindings for sparx5 with ptp interrupt. This is generated
when doing 2-step timestamping and the timestamp can be read from the
FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Supports configuring latency values and also adds
check for phy timestamping feature.
Signed-off-by: Divya Koppera<Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document RZ/V2L RPC-IF bindings. RZ/V2L RPC-IF is identical to one found
on the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-rpc-if" will be used as a fallback.
While at it, drop the comment "# RZ/G2L family" for "renesas,rzg2l-rpc-if"
compatible string as this will avoid changing the line for every new SoC
addition.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220301123527.15950-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
We're experimenting a bit with the process this time, with Dmitry
collecting display patches and merging them into msm-next with me
handling the gpu/etc side of things. Summary of interesting new bits
and pieces
* dpu + dp support for sc8180x
* dp support for sm8350
* dpu + dsi support for qcm2290
* 10nm dsi phy tuning support
* bridge support for dp encoder
* gpu support for additional 7c3 SKUs
* assorted cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com
|
|
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
|
|
Add bindings for the Intersil ISL79987 analog to MIPI CSI-2 decoder.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
To: linux-media@vger.kernel.org
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
DT_SCHEMA_FILES is currently restricted to a list of exact files with
the full source tree path (i.e. Documentation/devicetree/bindings/...).
Loosen this requirement and let DT_SCHEMA_FILES be a partial match.
With this, checking all schema files in a directory is possible:
$ make DT_SCHEMA_FILES=/gpio/ dt_binding_check
Or all schema files with 'qcom' in the path or filename:
$ make DT_SCHEMA_FILES=qcom dt_binding_check
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220228201006.1484903-1-robh@kernel.org
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add basic description of the tmp464 driver DT bindings.
Signed-off-by: Agathe Porte <agathe.porte@nokia.com>
Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220222223610.23098-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the Samsung Exynos SoC USB 2.0 EHCI and OHCI Controller bindings
to DT schema format.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220302190938.6195-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Samsung Exynos SoC USB 3.0 DWC3 Controller bindings to DT
schema format.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220302190938.6195-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|