aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2022-01-12dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulatorsJim Quinlan1-0/+19
Add bindings for Brcmstb EP voltage regulators. A new mechanism is to be added to the Linux PCI subsystem that will allocate and turn on/off regulators. These are standard regulators -- vpcie12v, vpcie3v3, and vpcie3v3aux -- placed in the DT in the bridge node under the host bridge device. The use of a regulator property in the PCIe EP subnode such as "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml file at https://github.com/devicetree-org/dt-schema/pull/63 Link: https://lore.kernel.org/r/20220106160332.2143-4-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-01-12dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.Jim Quinlan1-2/+6
The "pcie" and "msi" interrupts were given the same interrupt when they are actually different. Interrupt-map only had the INTA entry; add the INTB, INTC, and INTD entries. Link: https://lore.kernel.org/r/20220106160332.2143-3-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
2022-01-12Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds4-56/+148
Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1. Nothing major in here, just lots of little updates and cleanups. These include: - some USB header fixes picked from Ingo's header-splitup work - more USB4/Thunderbolt hardware support added - USB gadget driver updates and additions - USB typec additions (includes some acpi changes, which were acked by the ACPI maintainer) - core USB fixes as found by syzbot that were too late for 5.16-final - USB dwc3 driver updates - USB dwc2 driver updates - platform_get_irq() conversions of some USB drivers - other minor USB driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits) docs: ABI: fixed formatting in configfs-usb-gadget-uac2 usb: gadget: u_audio: Subdevice 0 for capture ctls usb: gadget: u_audio: fix calculations for small bInterval usb: dwc2: gadget: initialize max_speed from params usb: dwc2: do not gate off the hardware if it does not support clock gating usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h> USB: common: debug: add needed kernel.h include headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h headers/prep: usb: gadget: Fix namespace collision USB: core: Fix bug in resuming hub's handling of wakeup requests USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core usb: gadget: clear related members when goto fail usb: gadget: don't release an existing dev->buf usb: dwc2: Simplify a bitmap declaration usb: Remove usb_for_each_port() usb: typec: port-mapper: Convert to the component framework usb: Link the ports to the connectors they are attached to ...
2022-01-12Merge tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds4-7/+66
Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
2022-01-12Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds68-193/+967
Pull pin control bulk updates from Linus Walleij: "Core changes: - New standard enumerator and corresponding device tree bindings for output impedance pin configuration. (Implemented and used in the Renesas rzg2l driver.) - Cleanup of Kconfig and Makefile to be somewhat orderly and alphabetic. New drivers: - Samsung Exynos 7885 pin controller. - Ocelot LAN966x pin controller. - Qualcomm SDX65 pin controller. - Qualcomm SM8450 pin controller. - Qualcomm PM8019, PM8226 and PM2250 pin controllers. - NXP/Freescale i.MXRT1050 pin controller. - Intel Thunder Bay pin controller. Enhancements: - Introduction of the string library helper function "kasprintf_strarray()" and subsequent use in Rockchip, ST and Armada pin control drivers, as well as the GPIO mockup driver. - The Ocelot pin controller has been extensively rewritten to use regmap and other modern kernel infrastructure. - The Microchip SGPIO driver has been converted to use regmap. - The SPEAr driver had been converted to use regmap. - Substantial cleanups and janitorial on the Apple pin control driver that was merged for v5.16. - Janitorial to remove of_node assignments in the GPIO portions that anyway get this handled in the GPIO core. - Minor cleanups and improvements in several pin controllers" * tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits) pinctrl: imx: fix assigning groups names dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations pinctrl: bcm: ns: use generic groups & functions helpers pinctrl: imx: fix allocation result check pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt pinctrl: Propagate firmware node from a parent device dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings pinctrl: add one more "const" for generic function groups pinctrl: keembay: rework loops looking for groups names pinctrl: keembay: comment process of building functions a bit pinctrl: imx: prepare for making "group_names" in "function_desc" const ARM: dts: gpio-ranges property is now required pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED pinctrl: Get rid of duplicate of_node assignment in the drivers pinctrl-sunxi: don't call pinctrl_gpio_direction() pinctrl-bcm2835: don't call pinctrl_gpio_direction() pinctrl: bcm2835: Silence uninit warning pinctrl: Sort Kconfig and Makefile entries alphabetically pinctrl: Add Intel Thunder Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver ...
2022-01-12dt-bindings: leds: Replace moonlight with indicator in mt6360 exampleChiYuan Huang1-1/+1
Replace moonlight with indicator in mt6360 example to prevent the below build error: Error: Documentation/devicetree/bindings/leds/leds-mt6360.example.dts:114.24-25 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/leds/leds-mt6360.example.dt.yaml] Error 1 Link: https://lore.kernel.org/lkml/CAL_JsqJRMVE163LaHTbtFARc4f_qg33bfQx+sD3ukce_xQF+gA@mail.gmail.com/ Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Gene Chen <gene_chen@richtek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-01-12dt-bindings: net: oxnas-dwmac: Add bindings for OX810SENeil Armstrong1-0/+3
Add SoC specific bindings for OX810SE support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-12Merge branch 'dt/linus' into dt/nextRob Herring5-15/+13
Pick a fix which didn't make it into v5.16.
2022-01-12dt-bindings: net: mdio: Drop resets/reset-names child propertiesRob Herring1-6/+0
resets/reset-names are device specific and don't belong in the MDIO bus schema. For example, it doesn't match what is defined for the "qca,ar9331-switch" binding which defines "reset-names" to be "switch" rather than "phy". Neither name is that useful IMO. Other child properties are also device specific, but those won't conflict with device schemas. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220111170248.3160841-1-robh@kernel.org
2022-01-12dt-bindings: arm: amlogic: add H96-Max bindingsChristian Hewitt1-0/+1
Add the board binding for the Haochuangyi H96-Max STB device. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-9-christianshewitt@gmail.com
2022-01-12dt-bindings: vendor-prefixes: add haochuangyi prefixChristian Hewitt1-0/+2
Shenzhen Haochuangyi Technology Co.,Ltd are a manufacturer of Android Set-Top Box devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-8-christianshewitt@gmail.com
2022-01-12dt-bindings: arm: amlogic: add A95XF3-AIR bindingsChristian Hewitt1-0/+2
Add board bindings for the CYX A95XF3-AIR set-top box which ships with model variants distinguished by Ethernet configuration: models using external Gigabit PHY have a -gbit suffix, while models using an internal 10/100 PHY have no suffix. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-6-christianshewitt@gmail.com
2022-01-12dt-bindings: vendor-prefixes: add cyx prefixChristian Hewitt1-0/+2
Shenzhen CYX Industrial Co., Ltd are a manufacturer of Android Set-Top Box devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-5-christianshewitt@gmail.com
2022-01-12dt-bindings: arm: amlogic: add X96-AIR bindingsChristian Hewitt1-0/+2
Add board bindings for the Amediatech X96-AIR STB which ships with model variants distiguished by Ethernet configuration: models using an external Gigabit PHY have a -gbit suffix, while models using an internal 10/100 PHY have no suffix. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-3-christianshewitt@gmail.com
2022-01-11dt-bindings: mailbox: apple,mailbox: Add generic and t6000 compatiblesHector Martin1-3/+9
Much as we've done with other blocks, let's introduce generic compatibles so drivers can bind to those and still work with future SoCs, as long as the hardware remains the same. Also go ahead and add compatibles for the new t600x SoCs (we group those as t6000). Note that no DTs instantiate devices with this binding yet. Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2022-01-11Merge branches 'clk-ingenic' and 'clk-mediatek' into clk-nextStephen Boyd5-0/+6
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support * clk-ingenic: clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks * clk-mediatek: clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
2022-01-11Merge branches 'clk-socfpga', 'clk-toshiba', 'clk-st' and 'clk-bitmain' into clk-nextStephen Boyd2-0/+109
- Clock and reset driver for Toshiba Visconti SoCs * clk-socfpga: clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: remove redundant assignment after a mask operation clk: socfpga: remove redundant assignment on division * clk-toshiba: clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC * clk-st: clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent * clk-bitmain: clk: bm1880: remove kfrees on static allocations
2022-01-11Merge branches 'clk-nvidia', 'clk-imx', 'clk-samsung' and 'clk-qcom' into clk-nextStephen Boyd6-0/+468
* clk-nvidia: clk: tegra: Support runtime PM and power domain clk: tegra: Make vde a child of pll_p on tegra114 * clk-imx: clk: imx8mp: Fix the parent clk of the audio_root_clk clk: imx8mp: Remove IPG_AUDIO_ROOT from imx8mp-clock.h clk: imx8mn: Fix imx8mn_clko1_sels clk: imx: Use div64_ul instead of do_div clk: imx: imx8ulp: set suppress_bind_attrs to true * clk-samsung: clk: samsung: Add initial Exynos7885 clock driver clk: samsung: clk-pll: Add support for pll1417x clk: samsung: Make exynos850_register_cmu shared dt-bindings: clock: Document Exynos7885 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos7885 CMU clk: samsung: exynos850: Add missing sysreg clocks dt-bindings: clock: Add bindings for Exynos850 sysreg clocks clk: samsung: exynos850: Register clocks early clk: samsung: exynos850: Keep some crucial clocks running clk: samsung: exynos850: Implement CMU_CMGP domain dt-bindings: clock: Add bindings for Exynos850 CMU_CMGP clk: samsung: exynos850: Implement CMU_APM domain dt-bindings: clock: Add bindings for Exynos850 CMU_APM clk: samsung: Update CPU clk registration clk: samsung: Remove meaningless __init and extern from header files clk: samsung: remove __clk_lookup() usage dt-bindings: clock: samsung: add IDs for some core clocks * clk-qcom: (25 commits) clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled clk: qcom: clk-alpha-pll: Increase PLL lock detect poll time clk: qcom: turingcc-qcs404: explicitly include clk-provider.h clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h clk: qcom: mmcc-apq8084: explicitly include clk-provider.h clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h clk: qcom: gcc-sm6350: explicitly include clk-provider.h clk: qcom: gcc-msm8994: explicitly include clk-provider.h clk: qcom: gcc-sm8350: explicitly include clk-provider.h clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller clk: qcom: Add clock driver for SM8450 clk: qcom: Add SDX65 GCC support clk: qcom: Add LUCID_EVO PLL type for SDX65 dt-bindings: clock: Add SM8450 GCC clock bindings dt-bindings: clock: Add SDX65 GCC clock bindings clk: qcom: rpmh: add support for SM8450 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8450 clk: qcom: smd-rpm: Drop binary value handling for buffered clock ...
2022-01-11Merge branches 'clk-x86', 'clk-stm', 'clk-amlogic' and 'clk-allwinner' into clk-nextStephen Boyd1-0/+4
* clk-x86: clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: Introduce clk-tps68470 driver platform/x86: int3472: Deal with probe ordering issues platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Add get_sensor_adev_and_name() helper platform/x86: int3472: Split into 2 drivers platform_data: Add linux/platform_data/tps68470.h file i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function i2c: acpi: Use acpi_dev_ready_for_enumeration() helper ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device * clk-stm: clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell * clk-amlogic: clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB * clk-allwinner: clk: sunxi-ng: Add support for the D1 SoC clocks clk: sunxi-ng: gate: Add macros for gates with fixed dividers clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw dt-bindings: clk: Add compatibles for D1 CCUs clk: sunxi-ng: Allow the CCU core to be built as a module clk: sunxi-ng: Convert early providers to platform drivers clk: sunxi-ng: Allow drivers to be built as modules clk: sunxi-ng: Export symbols used by CCU drivers
2022-01-11Merge branches 'clk-doc', 'clk-renesas', 'clk-at91', 'clk-cleanup' and 'clk-debugfs' into clk-nextStephen Boyd2-0/+61
* clk-doc: clk: Gemini: fix struct name in kernel-doc clk: zynq: pll: Fix kernel-doc warnings clk: imx: pllv1: fix kernel-doc notation for struct clk_pllv1 * clk-renesas: (31 commits) clk: renesas: r9a07g044: Add GPU clock and reset entries clk: renesas: r9a07g044: Add mux and divider for G clock clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro clk: renesas: cpg-mssr: Add support for R-Car S4-8 clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions dt-bindings: power: Add r8a779f0 SYSC power domain definitions clk: renesas: r9a07g044: Add TSU clock and reset entry mmc: renesas_sdhi: Simplify an expression mmc: renesas_sdhi: Use devm_clk_get_optional() to obtain CD clock dt-bindings: clock: renesas,cpg-mssr: Document r8a779f0 clk: renesas: cpg-mssr: propagate return value of_genpd_add_provider_simple() clk: renesas: cpg-mssr: Check return value of pm_genpd_init() clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple() clk: renesas: rzg2l: Check return value of pm_genpd_init() clk: renesas: r9a07g044: Add RSPI clock and reset entries clk: renesas: r9a07g044: Change core clock "I" from DEF_FIXED->DEF_DIV clk: renesas: rzg2l: Add CPG_PL1_DDIV macro mmc: renesas_sdhi: Parse DT for SDnH mmc: renesas_sdhi: Use dev_err_probe when getting clock fails ... * clk-at91: clk: lan966x: Extend lan966x clock driver for clock gating support dt-bindings: clock: lan966x: Extend includes with clock gates dt-bindings: clock: lan966x: Extend for clock gate support clk: gate: Add devm_clk_hw_register_gate() clk: lan966x: Add lan966x SoC clock driver dt-bindings: clock: lan966x: Add LAN966X Clock Controller dt-bindings: clock: lan966x: Add binding includes for lan966x SoC clock IDs * clk-cleanup: clk: stm32mp1: remove redundant assignment to pointer data clk: __clk_core_init() never takes NULL clk: clk_core_get() can also return NULL clk/ti/adpll: Make const pointer error a static const array * clk-debugfs: clk: Enable/Disable runtime PM for clk_summary clk: Emit a stern warning with writable debugfs enabled clk: Add write operation for clk_parent debugfs node
2022-01-11Merge tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds8-248/+332
Pull gpio updates from Bartosz Golaszewski: "The gpio-sim module is back, this time without any changes to configfs. This results in a less elegant user-space interface but I never got any follow-up on the committable items and didn't want to delay this module for several more months. Other than that we have support for several new models and some support going away. We started working on converting GPIO drivers to using fwnode exclusively in order to limit references to OF symbols to gpiolib-of.c exclusively. We also have regular tweaks and improvements all over the place. Summary: - new testing module: gpio-sim that is scheduled to replace gpio-mockup - initial changes aiming at converting all GPIO drivers to using the fwnode interface and limiting any references to OF symbols to gpiolib-of.c - add support for Tegra234 and Tegra241 to gpio-tegra186 - add support for new models (SSD201 and SSD202D) to gpio-msc313 - add basic support for interrupts to gpio-aggregator - add support for AMDIF031 HID device to gpio-amdpt - drop support for unused platforms in gpio-xlp - cleanup leftovers from the removal of the legacy Samsung Exynos GPIO driver - use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make PREEMPT_RT happy - generalize the common 'ngpios' device property by reading it in the core gpiolib code so that we can remove duplicate reads from drivers - allow line names from device properties to override names set by drivers - code shrink in gpiod_add_lookup_table() - add new model to the DT bindings for gpio-vf610 - convert DT bindings for tegra devices to YAML - improvements to interrupt handling in gpio-rcar and gpio-rockchip - updates to intel drivers from Andy (details in the merge commit) - some minor tweaks, improvements and coding-style fixes all around the subsystem" * tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits) gpio: rcar: Propagate errors from devm_request_irq() gpio: rcar: Use platform_get_irq() to get the interrupt gpio: ts5500: Use platform_get_irq() to get the interrupt gpio: dwapb: Switch to use fwnode instead of of_node gpiolib: acpi: make fwnode take precedence in struct gpio_chip dt-bindings: gpio: samsung: drop unused bindings gpio: max3191x: Use bitmap_free() to free bitmap gpio: regmap: Switch to use fwnode instead of of_node gpio: tegra186: Add support for Tegra241 dt-bindings: gpio: Add Tegra241 support gpio: brcmstb: Use local variable to access OF node gpio: Remove unused local OF node pointers gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe() gpio: msc313: Add support for SSD201 and SSD202D gpio: msc313: Code clean ups dt-bindings: gpio: msc313: Add offsets for ssd20xd dt-bindings: gpio: msc313: Add compatible for ssd20xd gpio: sim: fix uninitialized ret variable gpio: Propagate firmware node from a parent device gpio: Setup parent device and get rid of unnecessary of_node assignment ...
2022-01-11Merge tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds14-112/+181
Pull MMC updates from Ulf Hansson: "MMC core: - Use common polling loop for CMD1 - Add support for DT compatibles for card quirks and use it for ti,wl1251 - Fixup storing of the OCR mask for MMC_QUIRK_NONSTD_SDIO MMC host: - dw_mmc: Add support for MMC_GEN_CMDs - dw_mmc: Fixup calculation of the data timeout - dw_mmc-exynos: Add support for the ARTPEC-8 variant - jz4740: Add support for bi-directional DMA channels - mmci: Add support for eMMC HS200 mode for the stm32 sdmmc variant - mmci: Add support for stm32 sdmmc variant revision v2.2 - mtk-sd: A couple of various minor improvements - omap_hsmmc: Drop redundant initialization for the ti,wl1251 chip - sdhci-esdhc-imx: Add support for the i.MXRT series variant - sdhci-esdhc-imx: Add Haibo Chen as maintainer - sdhci-pci: Add support for the Intel ADL variant - sdhci-pci-gli: GL975[50]: Add support for the Apple ARM64 variant - sdhci-pci-o2micro: Improve support for SDR104/HS200" * tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (54 commits) dt-bindings: mmc: synopsys-dw-mshc: integrate Altera and Imagination mmc: pwrseq: Use bitmap_free() to free bitmap dt-bindings: mmc: PL18x stop relying on order of dma-names dt-bindings: mmc: sdhci-msm: Add compatible string for msm8994 mmc: au1xmmc: propagate errors from platform_get_irq() mmc: sdhci-pci-o2micro: Restore the SD clock's base clock frequency mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs mmc: mtk-sd: Fix usage of devm_clk_get_optional() mmc: mtk-sd: Take action for no-sdio device-tree parameter mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fields mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling MAINTAINERS: Add i.MX sdhci maintainer mmc: jz4740: Support using a bi-directional DMA channel dt-bindings: mmc: ingenic: Support using bi-directional DMA channel mmc: dw_mmc: Do not wait for DTO in case of error mmc: dw_mmc: Add driver callbacks for data read timeout mmc: dw_mmc-exynos: Add support for ARTPEC-8 dt-bindings: mmc: exynos-dw-mshc: Add support for ARTPEC-8 mmc: meson-mx-sdio: add IRQ check ...
2022-01-11Merge tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds12-338/+407
Pull MFD updates from Lee Jones: "New Device Support: - Add support for Lakefield PCH to Intel LPSS PCI Remove Device Support: - Remove support for ROHM BD70528 Power Management IC New Functionality: - Add support for SMBus and I2C mode to Dialog DA9062/61 PMIC - Enable I2C4 on Microsoft Surface Go & Go 2 Fix-ups: - Device Tree changes (inc. YAML conversion); maxim,max77686, rohm,bd9571mwv, syscon, brcm,twd, google,cros-ec - Use __maybe_unused instead of #ifery; atmel-flexcom - Allow the Regmap API to handle endianess internally; ntxec - Utilise I2C's .resume_noirq call-back; atmel-flexcom - Remove unused code; ti_am335x_tscadc - Use CPU-id instead of ACPI _HRV to ID variants; intel_soc_pmic_core - Allow device to power-off right from .probe(); tps65910 - Trivial (whitespace, typos, etc); da9063 Bug Fixes: - Fix ordering issues during probe; intel-lpss-acpi - Fix correct clock speed; intel-lpss-pci" * tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits) mfd: google,cros-ec: Fix property name for MediaTek rpmsg dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" mfd: ntxec: Change return type of ntxec_reg8 from __be16 to u16 mfd: tps65910: Set PWR_OFF bit during driver probe mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants mfd: intel-lpss: Fix I2C4 not being available on the Microsoft Surface Go & Go 2 dt-bindings: mfd: Add Broadcom's Timer-Watchdog block dt-bindings: mfd: Add Freecom system controller mfd: Kconfig: Change INTEL_SOC_PMIC_CHTDC_TI to bool dt-bindings: mfd: syscon: Add samsung,exynos850-sysreg mfd: da9062: Support SMBus and I2C mode mfd: intel-lpss-pci: Fix clock speed for 38a8 UART mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe() mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macro mfd: stmpe: Support disabling sub-functions mfd: atmel-flexcom: Use .resume_noirq mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP dt-bindings: mfd: bd9571mwv: Convert to json-schema mfd: intel-lpss: Add Intel Lakefield PCH PCI IDs dt-bindings: mfd: maxim,max77686: Convert to dtschema ...
2022-01-11Merge tag 'spi-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds12-145/+254
Pull spi updates from Mark Brown: "This has mostly been a quiet release for the SPI subsystem, almost all cleanups and fixes to existing drivers. A couple of changes that stand out: - Cleanups and support for version specific features in the DesignWare controller. - Removal of support for Netlogic devices from the XLP driver, the platform had previously been removed by MIPS so the support couldn't be used. - Conversion of several DT bindings to YAML format" * tag 'spi-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (53 commits) spi: don't include ptp_clock_kernel.h in spi.h spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe spi: atmel: Fix typo spi: dt-bindings: mediatek,spi-mtk-nor: Fix example 'interrupts' property spi: qcom: geni: handle timeout for gpi mode spi: qcom: geni: set the error code for gpi transfer spi: spi-mux: Add reference to spi-peripheral-props.yaml schema spi: ar934x: fix transfer size spi: pxa2xx: Propagate firmware node spi: dw: Propagate firmware node spi: dln2: Propagate firmware node spi: ar934x: fix transfer and word delays spi: uniphier: Fix a bug that doesn't point to private data correctly spi: spi-mtk-nor: add new clock name 'axi' for spi nor spi: atmel,quadspi: Define sama7g5 QSPI spi: atmel,quadspi: Convert to json-schema spi: Fix incorrect cs_setup delay handling dt-bindings: mtd: spi-nor: Add a reference to spi-peripheral-props.yaml spi: dt-bindings: cdns,qspi-nor: Move peripheral-specific properties out spi: dt-bindings: add schema listing peripheral-specific properties ...
2022-01-11Merge tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds7-31/+157
Pull regulator updates from Mark Brown: "This has been a fairly quiet release for the regulator API, the main thing has been the addition of helpers for interrupt handling from Matti Vaittinen. We do also have support for quite a few new devices. Summary: - Helpers for trivial interrupt notifications, making it easier for drivers to handle error interrupts. - Support for Dialog DA914x, Maxim MAX2008x, Qualcomm PM8826, PMG1100, and PM8450 and TI TPS68470" * tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (30 commits) regulator: Add MAX20086-MAX20089 driver dt-bindings: regulators: Add bindings for Maxim MAX20086-MAX20089 regulator: qcom_smd: Align probe function with rpmh-regulator regulator: remove redundant ret variable regulator: qcom-labibb: OCP interrupts are not a failure while disabled regulator: dt-bindings: samsung,s5m8767: Move fixed string BUCK9 to 'properties' regulator: Introduce tps68470-regulator driver drivers/regulator: remove redundant ret variable regulator: fix bullet lists of regulator_ops comment regulator: Fix type of regulator-coupled-max-spread property regulator: maxim,max8973: Document interrupts property regulator: qcom-rpmh: Add support for PM8450 regulators regulator: qcom,rpmh: Add compatible for PM8450 regulator: da9121: Add DA914x binding info regulator: da9121: Remove erroneous compatible from binding regulator: da9121: Add DA914x support regulator: da9121: Prevent current limit change when enabled regulator: qcom-rpmh: Add PMG1110 regulators dt-bindings: regulator: Add compatible for pmg1110 regulator: qcom_spmi: Add pm8226 regulators ...
2022-01-11Merge tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds3-2/+92
Pull MTD updates from Miquel Raynal: "MTD core changes: - mtdchar: Prevent unbounded allocation in MEMWRITE ioctl - gen_probe: Use bitmap_zalloc() when applicable - Introduce an expert mode for forensics and debugging purposes - Clear out unregistered devices a bit more - Provide unique name for nvmem device - Remove unused header file <linux/mtd/latch-addr-flash.h> - Fixed breaking list in __mtd_del_partition. MTD device changes: - Warn about failure to unregister mtd device in sst25l, mchp48l640, mchp23k256, and dataflash drivers. Raw NAND core changes: - Export nand_read_page_hwecc_oob_first() GPMC memory controller for OMAP2 NAND controller changes: - Add support for AM64 SoC and allow build on K3 platforms - Use a compatible match table when checking for NAND controller - Use platform_get_irq() to get the interrupt Raw NAND controller changes: - OMAP2 NAND controller: - Document the missing 'rb-gpios' DT property - Drop unused variable - Fix force_8bit flag behaviour for DMA mode - Move to exec_op interface - Use platform_get_irq() to get the interrupt - Renesas: - Add new NAND controller driver with its bindings and MAINTAINERS entry - Onenand: - Remove redundant variable ooblen - MPC5121: - Remove unused variable in ads5121_select_chip() - GPMI: - Add ERR007117 protection for nfc_apply_timings - Remove explicit default gpmi clock setting for i.MX6 - Use platform_get_irq_byname() to get the interrupt - Remove unneeded variable - Ingenic: - JZ4740 needs 'oob_first' read page function - Davinci: - Rewrite function description - Avoid duplicated page read - Don't calculate ECC when reading page SPI NOR core changes: - Add Pratyush as SPI NOR co-maintainer. - Flash parameters initialization was done in a spaghetti way. Clean flash parameters initialization. - Rework the flash_info flags and clarify where one should be used. - Initialize all flash parameters based on JESD216 SFDP where possible. Flash parameters and settings that are SFDP discoverable should not be duplicated via flash_info flags at flash declaration. - Remove debugfs entries that duplicate sysfs entries. SPI NOR manufacturer driver changes: - Use late_init() hook in various drivers to make it clear that those flash parameters are either not declared in the JESD216 SFDP standard, or the SFDP tables which define those flash parameters are not defined by the flash. - Fix mtd size for s3an flashes. - Write 2 bytes when disabling Octal DTR mode: 1 byte long transactions are not allowed in 8D-8D-8D mode. Hyperbus changes: - Couple of fixes in Renesas hyperbus rpc-if driver to avoid crash on module remove and for missing check for error value in probe" * tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (71 commits) mtd: spi-nor: Remove debugfs entries that duplicate sysfs entries mtd: spi-nor: micron-st: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: spansion: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: core: use 2 data bytes for template ops mtd: spi-nor: Constify part specific fixup hooks mtd: spi-nor: core: Remove reference to spi-nor.c mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3 memory: omap-gpmc: Use a compatible match table when checking for NAND controller memory: omap-gpmc: Add support for GPMC on AM64 SoC dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64 memory: omap-gpmc: Use platform_get_irq() to get the interrupt MAINTAINERS: Add an entry for Renesas NAND controller mtd: rawnand: renesas: Add new NAND controller driver dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller mtd: rawnand: gpmi: remove unneeded variable mtd: rawnand: omap2: drop unused variable mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode mtd: rawnand: omap2: Add compatible for AM64 SoC ...
2022-01-11Merge tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds4-42/+106
Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - introduce "No Battery" health status - use library interpolation - add power_supply_battery_info documentation - migrate power_supply_battery_info to be fully heap allocated making it more obvious that it needs to be free'd manually Drivers: - max77976-charger: new driver - qcom-smbb: add pm8226 charger support - bq25890-charger: support battery temperature readings - ab8500: continue migrating towards using standard core APIs" * tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply_core: Pass pointer to battery info power: supply: ab8500: Fix the error handling path of ab8500_charger_probe() power: reset: mt6397: Check for null res pointer power: bq25890: add POWER_SUPPLY_PROP_TEMP power: supply: qcom_smbb: support pm8226 dt-bindings: power: supply: pm8941-charger: add pm8226 power: supply: ab8500: Standardize capacity lookup power: supply: ab8500: Standardize temp res lookup power: supply: ab8500: Standardize CV voltage power: supply: ab8500: Standardize CC current power: supply: ab8500: Make recharge capacity a constant power: supply: ab8500: Standardize termination current power: supply: ab8500: Standardize internal resistance power: supply: ab8500_fg: Init battery data in bind() power: supply: ab8500: Standardize voltages power: supply: ab8500: Standardize technology power: supply: ab8500: Standardize design capacity power: supply: ab8500: Use only one battery type power: supply: ab8500: Drop unused battery types power: supply: ab8500: Standardize operating temperature ...
2022-01-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds1-0/+2
Pull HID updates from Jiri Kosina: "Highlights: - support for USI style pens (Tero Kristo, Mika Westerberg) - quirk for devices that need inverted X/Y axes (Alistair Francis) - small core code cleanups and deduplication (Benjamin Tissoires) - Apple Magic Keyboard support improvements (José Expósito, Alex Henrie, Benjamin Berg) - locking performance improvement for hidraw code (André Almeida) - PM wakeup support for i2c-hid driver (Matthias Kaehlcke - new driver to support for LetSketch device (Hans de Goede) - proper batter reporting for hid-magicmouse USB-connected devices (José Expósito)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (32 commits) HID: magicmouse: Fix an error handling path in magicmouse_probe() HID: address kernel-doc warnings HID: intel-ish-hid: ishtp-fw-loader: Fix a kernel-doc formatting issue HID: intel-ish-hid: ipc: Specify no cache snooping on TGL and ADL HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init HID: Add new Letsketch tablet driver HID: apple: Add Magic Keyboard 2021 with fingerprint reader FN key mapping HID: apple: Add 2021 magic keyboard FN key mapping HID: magicmouse: set Magic Trackpad 2021 name HID: magicmouse: set device name when it has been personalized HID: apple: Add 2021 Magic Keyboard with number pad HID: apple: Add 2021 Magic Keyboard with fingerprint reader HID: i2c-hid-of: Expose the touchscreen-inverted properties HID: quirks: Allow inverting the absolute X/Y values HID: hidraw: Replace hidraw device table mutex with a rwsem HID: thrustmaster use swap() to make code cleaner HID: debug: Add USI usages ...
2022-01-11Merge tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds3-0/+31
Pull hwmon updates from Guenter Roeck: "New drivers: - PMBus driver for MPS Multi-phase mp5023 - PMBus driver for Delta AHE-50DC fan control module - Driver for NZXT RGB&Fan Controller/Smart Device v2 - Driver for Texas Instruments INA238 - Driver to support X370 Asus WMI - Driver to support B550 Asus WMI Other notable changes: - Cleanup of ntc_thermistor driver, and added support for Samsung 1404-001221 NTC - Improve detection of LM84, MAX1617, and MAX1617A in adm1021 driver - Clean up tmp401 driver, and convert to with_info API - Add support for regulators and IR38060, IR38164 IR38263 to ir38064 PMBus driver - Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh to k10temp driver - Add support for F81966 to f71882fg driver - Add support for ONSEMI N34TS04 to jc42 driver - Clean up and simplify dell-smm driver - Add support for ROG STRIX B550-A/X570-I GAMING to nct6775 driver And various other minor improvements and fixes" * tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits) hwmon: (nzxt-smart2) make array detect_fans_report static const hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probe hwmon: (nzxt-smart2) Fix "unused function" warning hwmon: (dell-smm) Pack the whole smm_regs struct hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage hwmon: (mr75203) fix wrong power-up delay value hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible" hwmon/pmbus: (ir38064) Expose a regulator hwmon/pmbus: (ir38064) Add of_match_table hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263 hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2. hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING hwmon: (pmbus) Add support for MPS Multi-phase mp5023 dt-bindings: add Delta AHE-50DC fan control module hwmon: (pmbus) Add Delta AHE-50DC fan control module driver hwmon: prefix kernel-doc comments for structs with struct hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC hwmon: (ntc_thermistor) Drop OF dependency hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked() hwmon: (dell-smm) Simplify ioctl handler ...
2022-01-11dt-bindings: clock: samsung: convert S5Pv210 to dtschemaKrzysztof Kozlowski2-77/+79
Convert Samsung S5Pv210 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-8-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos5410 to dtschemaKrzysztof Kozlowski2-50/+66
Convert Samsung Exynos5410 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-7-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos5260 to dtschemaKrzysztof Kozlowski2-190/+382
Convert Samsung Exynos5260 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-6-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: extend Exynos7 bindings with UFSKrzysztof Kozlowski1-2/+5
The UFS for Exynos7 SoC clock controller requires additional input clocks for the FSYS1 clock controller. Update the bindings to reflect this, at least in theory. In practice, these input clocks are ignored, so it is rather adjusting of bindings to existing DTS, without affecting any real users. I understand that is not how it should be done, though... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-5-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos7 to dtschemaKrzysztof Kozlowski2-108/+269
Convert Samsung Exynos7 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-4-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos5433 to dtschemaKrzysztof Kozlowski2-507/+524
Convert Samsung Exynos5433 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-3-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712Niklas Söderlund1-0/+111
Add bindings for Maxim Integrated MAX96712 deserializer. The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI CSI-2 D-PHY or C-PHY formatted outputs. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211230123354.623876-1-niklas.soderlund+renesas@ragnatech.se
2022-01-11dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizesRob Herring1-11/+11
The '/bits/ 64' notation applies the next <> list of values. Another <> list is encoded as 32-bits by default. IOW, each <> list needs to be preceeded with '/bits/ 64'. While the dts format allows this, as a rule we don't mix sizes for DT properties since all size information is lost in the dtb file. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220107032026.2408196-1-robh@kernel.org
2022-01-11dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'Rob Herring1-1/+3
The 'maxim,rcomp' is defined as a uint32, but the description and users all say it is uint8-array with 1 or 2 elements. The tools missed checking this case. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220107030433.2381616-1-robh@kernel.org
2022-01-11dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in exampleRob Herring1-1/+2
The 2nd example has an interrupts cells size of 4, but the 'interrupts' property has 3 cells. The example should also be separate since the cell size differs in each example. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-5-robh@kernel.org
2022-01-11dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in exampleRob Herring1-1/+1
'interrupts' does not take a phandle, so remove it in the example. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220106182518.1435497-4-robh@kernel.org
2022-01-11dt-bindings: clock: imx5: Drop clock consumer node from exampleRob Herring1-8/+1
The example nodes have different sized interrupt cells which is not valid given no interrupt-parent is specified. As provider examples don't need to show the consumer side in the first place, just drop the consumer node. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-1-robh@kernel.org
2022-01-11dt-bindings: Drop required 'interrupt-parent'Rob Herring7-15/+0
'interrupt-parent' is never required as it can be in a parent node or a parent node itself can be an interrupt provider. Where exactly it lives is outside the scope of a binding schema. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220107031905.2406176-1-robh@kernel.org
2022-01-11dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'Rob Herring1-1/+1
DT booleans don't have a value and 'ti,max-output-impedance' is defined and used as a boolean. So drop the bogus value in the example. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107030513.2385482-1-robh@kernel.org
2022-01-11dt-bindings: net: wireless: mt76: Fix 8-bit property sizesRob Herring1-2/+2
The '/bits/ 8' notation applies the next <> list of values. Another <> list is encoded as 32-bits by default. IOW, each <> list needs to be preceeded with '/bits/ 8'. While the dts format allows this, as a rule we don't mix sizes for DT properties since all size information is lost in the dtb file. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107030419.2380198-1-robh@kernel.org
2022-01-11dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schemaRob Herring1-4/+0
'max-functions' is already defined in pci-ep.yaml schema as a uint8 and all users of it expect an uint8. Drop the conflicting schema. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107030358.2378221-1-robh@kernel.org
2022-01-11dt-bindings: i2c: st,stm32-i2c: Make each example a separate entryRob Herring1-0/+6
Each independent example should be a separate entry. This allows for 'interrupts' to have different cell sizes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220106183037.1443931-1-robh@kernel.org
2022-01-11dt-bindings: net: stm32-dwmac: Make each example a separate entryRob Herring1-1/+3
Each independent example should be a separate entry. This allows for 'interrupts' to have different cell sizes. The first example also has a phandle in 'interrupts', so drop the phandle. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-8-robh@kernel.org
2022-01-11dt-bindings: net: Cleanup MDIO node schemasRob Herring15-89/+38
The schemas for MDIO bus nodes range from missing to duplicating everything in mdio.yaml. The MDIO bus node schemas only need to reference mdio.yaml, define any binding specific properties, and define 'unevaluatedProperties: false'. This ensures that MDIO nodes only contain defined properties. With this, any duplicated properties can be removed. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Cc: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Cc: "Fernández Rojas" <noltari@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220105151009.3093506-1-robh@kernel.org
2022-01-11dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCsJim Quinlan1-0/+2
The Broadcom STB Arm and MIPs SOCs use the same PCIe controller HW, although the MIPs version is older. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-01-10Merge tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-0/+76
Pull thermal control updates from Rafael Wysocki: "These add a new driver for Renesas RZ/G2L TSU, update a few existing thermal control drivers and clean up the tmon utility. Specifics: - Add new TSU driver and DT bindings for the Renesas RZ/G2L platform (Biju Das). - Fix missing check when calling reset_control_deassert() in the rz2gl thermal driver (Biju Das). - In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), avoid intentionally writing across neighboring fields in the int340x thermal control driver (Kees Cook). - Fix RFIM mailbox write commands handling in the int340x thermal control driver (Sumeet Pawnikar). - Fix PM issue occurring in the iMX thermal control driver during suspend/resume by implementing PM runtime support in it (Oleksij Rempel). - Add 'const' annotation to thermal_cooling_ops in the Intel powerclamp driver (Rikard Falkeborn). - Fix missing ADC bit set in the iMX8MP thermal driver to enable the sensor (Paul Gerber). - Drop unused local variable definition from tmon (ran jianping)" * tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/int340x: Fix RFIM mailbox write commands thermal/drivers/rz2gl: Add error check for reset_control_deassert() thermal/drivers/imx8mm: Enable ADC when enabling monitor thermal/drivers: Add TSU driver for RZ/G2L dt-bindings: thermal: Document Renesas RZ/G2L TSU thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops thermal/drivers/imx: Implement runtime PM support thermal: tools: tmon: remove unneeded local variable thermal: int340x: Use struct_group() for memcpy() region
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.