| Age | Commit message (Collapse) | Author | Files | Lines |
|
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
* tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
dt-bindings: arm: samsung: document jackpotlte board binding
dt-bindings: soc: samsung: Fix I2C clocks order in USI binding example
arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9
dt-bindings: soc: samsung: Add Exynos USI bindings
arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
Link: https://lore.kernel.org/r/20211220115530.30961-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mt8183:
- add Acer Chromebook 314
- evb: add node to read thermisor from AUXIN0
- add several sku's for Lenovo IdeaPad Flex 3 Chromebook and ASUS Chromebook Detachable CM3
- update sensor mapping of the board temperature sensor
- add some coresight nodes for CPU debugging
- USB Type C connector description to all Chromebooks
mt8192, mt8516:
- smaller i2c related fixes
mt8173:
- enable backlight enable pin to all Chromebooks
mt7986[a,b]:
- add basic support
* tag 'v5.16-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits)
arm64: dts: mediatek: add pinctrl support for mt7986b
arm64: dts: mediatek: add pinctrl support for mt7986a
arm64: dts: mt8183: kukui: Add Type C node
arm64: dts: mediatek: add basic mt7986 support
dt-bindings: arm64: dts: mediatek: Add mt7986 series
arm64: dts: mt8183: support coresight-cpu-debug for mt8183
arm64: dts: mediatek: mt8173-elm: Add backlight enable pin config
arm64: dts: mediatek: mt8173-elm: Move pwm pinctrl to pwm0 node
arm64: dts: mt8183-kukui: Update Tboard sensor mapping table
arm64: dts: mediatek: mt8173: Add gce-client-reg to display od/ufo
dt-bindings: arm64: dts: mediatek: Add sku22 for mt8183 kakadu board
dt-bindings: arm64: dts: mediatek: Add more SKUs for mt8183 fennel board
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-cozmo
arm64: dts: mt8183: Add kakadu sku22
arm64: dts: mt8183: Add more fennel SKUs
arm64: dts: mt8183: Add kukui-jacuzzi-cozmo board
arm64: dts: mt8183: jacuzzi: remove unused ddc-i2c-bus
arm64: dts: mediatek: mt8183-evb: Add node for thermistor
arm64: dts: mediatek: mt8516: remove 2 invalid i2c clocks
arm64: dts: mediatek: mt8192: fix i2c node names
...
Link: https://lore.kernel.org/r/0d05e8b6-c56f-bad7-00c1-44682cedb38f@suse.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX dt-bindings update for 5.17:
- New bindings for i.MX SPBA bus and i.MX8MN DISP blk-ctrl.
- New vendor prefix for BSH Hausgeraete GmbH and JOZ BV.
- New compatibles for various i.MX6 and i.MX8 boards.
- Add optional 'fsl,continuous-burst-clk' property support for imx-weim
binding.
* tag 'imx-bindings-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
dt-bindings: arm: fsl: Add BSH SMM-M2 IMX6ULZ SystemMaster board
dt-bindings: arm: fsl: Add iMX8MN BSH SMM S2 boards
dt-bindings: Add vendor prefix for BSH Hausgeraete GmbH
dt-bindings: soc: imx: Add binding doc for spba bus
dt-bindings: bus: imx-weim: add words about continuous bclk
dt-bindings: arm: fsl: add TQMa8Mx boards
dt-bindings: arm: fsl: add TQMa8MxNL boards
dt-bindings: arm: fsl: add TQMa8MxML boards
dt-bindings: arm: fsl: Add binding for imx8ulp evk
dt-bindings: arm: fsl: Add Y Soft IOTA Crux/Crux+ boards
dt-bindings: arm: fsl: add TQ-Systems boards based on i.MX6Q/QP/DL
dt-bindings: arm: fsl: add JOZ Access Point
dt-bindings: vendor-prefixes: Add an entry for JOZ BV
Link: https://lore.kernel.org/r/20211218071427.26745-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms:
- J721s2 SoC, SoM and Common Processor Board support
* New features:
- CAN support on AM64 EVM and SK
- TimeSync Router on AM64
* Fixes:
- Correct d-cache-sets info on J7200
- Fix L2 cache-sets value for J721e/J7200/AM64
- Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200
- Disable McASP on IoT2050 board to fix dtbs_check warnings
* tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arch: arm64: ti: Add support J721S2 Common Processor Board
arm64: dts: ti: Add initial support for J721S2 System on Module
arm64: dts: ti: Add initial support for J721S2 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
dt-bindings: arm: ti: Add bindings for J721s2 SoC
arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK
arm64: dts: ti: k3-am64-main: Add support for MCAN
arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes
arm64: dts: ti: k3-j721e: Add support for MCAN nodes
arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
arm64: dts: ti: k3-am65-mcu: Add Support for MCAN
arm64: dts: ti: k3-am64-main: add timesync router node
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
arm64: dts: ti: k3-am642: Fix the L2 cache sets
arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
arm64: dts: ti: k3-j721e: correct cache-sets info
Link: https://lore.kernel.org/r/20211217172806.10023-2-vigneshr@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a compatible string for "ssd20xd" for the SigmaStar SSD201
and SSD202D chips. These chips are the same die with different
memory bonded so they don't need their own strings.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
dt-bindings: Changes for v5.17-rc1
This contains a bunch of json-schema conversions for various Tegra-
related DT bindings and additions for new SoC and board support.
* tag 'tegra-for-5.17-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits)
media: dt: bindings: tegra-vde: Document OPP and power domain
media: dt: bindings: tegra-vde: Convert to schema
dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and GR3D
dt-bindings: host1x: Document OPP and power domain properties
dt-bindings: clock: tegra-car: Document new clock sub-nodes
dt-bindings: ARM: tegra: Document Pegatron Chagall
dt-bindings: ARM: tegra: Document ASUS Transformers
dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties
dt-bindings: serial: Document Tegra234 TCU
dt-bindings: serial: tegra-tcu: Convert to json-schema
dt-bindings: thermal: tegra186-bpmp: Convert to json-schema
dt-bindings: firmware: tegra: Convert to json-schema
dt-bindings: tegra: pmc: Convert to json-schema
dt-bindings: serial: 8250: Document Tegra234 UART
dt-bindings: mmc: tegra: Document Tegra234 SDHCI
dt-bindings: fuse: tegra: Document Tegra234 FUSE
dt-bindings: fuse: tegra: Convert to json-schema
dt-bindings: rtc: tegra: Document Tegra234 RTC
dt-bindings: rtc: tegra: Convert to json-schema
dt-bindings: mailbox: tegra: Document Tegra234 HSP
...
Link: https://lore.kernel.org/r/20211217162253.1801077-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Samsung SoC drivers changes for v5.17
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
* tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: keep SoC driver bindings together
soc: samsung: Add USI driver
dt-bindings: soc: samsung: Add Exynos USI bindings
soc: samsung: exynos-pmu: Add Exynos850 support
dt-bindings: samsung: pmu: Document Exynos850
soc: samsung: exynos-chipid: add Exynos7885 SoC support
soc: samsung: exynos-chipid: describe which SoCs go with compatibles
Link: https://lore.kernel.org/r/20211220115405.30434-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
DT bindings for Texas Instruments TLV320ADC3001 and TLV320ADC3101
audio ADCs.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2112151759170.27889@lap5cg0092dnk.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds the documentation for the devicetree bindings of the Mstar
MSC313e timer driver, found from MSC313e SoCs and newer.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217195727.8955-5-romain.perier@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Extend dt-bindings for lan966x with analyzer interrupt.
This interrupt can be generated for example when the HW learn/forgets
an entry in the MAC table.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add binding for the WinLink E850-96 board, which is based on Samsung
Exynos850 SoC.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211217161549.24836-5-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
WinLink Co., Ltd is a hardware design and manufacturing company based in
South Korea. Official web-site: [1].
[1] http://win-link.net/
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217161549.24836-4-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide dt-schema documentation for Exynos7885 SoC clock controller.
Description is modified from Exynos850 clock controller documentation as
I couldn't describe it any better, that was written by Sam Protsenko.
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206153124.427102-3-virag.david003@gmail.com
|
|
This converts the VCHIQ bindings to YAML format.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215094448.280796-1-nsaenz@kernel.org
|
|
Recently added Samsung Exynos USI driver devicetree bindings were added
under ../bindings/soc/samsung/exynos-usi.yaml, so move there also two
other bindings for Exynos SoC drivers: the PMU and ChipID.
Update Samsung Exynos MAINTAINERS entry to include this new path.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211213112057.16709-1-krzysztof.kozlowski@canonical.com
|
|
There are two different PCIe PHYs on SM8450, one having one lane and
another with two lanes. Add DT bindings for the first one. Support for
second PCIe host and PHY will be submitted separately.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211214225846.2043361-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the GPIO-based I2C mux bindings from the free-form text format
to json-schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217165658.2650677-4-thierry.reding@gmail.com
|
|
Convert the pinctrl-based I2C mux bindings from the free-form text
format to json-schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217165658.2650677-2-thierry.reding@gmail.com
|
|
Convert the Tegra I2C controller bindings from plain text to json-schema
format.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217165658.2650677-1-thierry.reding@gmail.com
|
|
The two bindings are very similar and should be covered by the same
document, do that so we can get rid of an additional binding file.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217160546.497012-3-f.fainelli@gmail.com
|
|
Convert the Broadcom BCM7120 Level 2 interrupt controller Device Tree
binding to YAML to help with validation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217160546.497012-2-f.fainelli@gmail.com
|
|
Merge series from Dmitry Osipenko <digetx@gmail.com>:
This series revives Tegra20 S/PDIF driver which was upstreamed long time
ago, but never was used. It also turns Tegra DRM HDMI driver into HDMI
audio CODEC provider. Finally, HDMI audio is enabled in device-trees.
For now the audio is enable only for Acer A500 tablet and Toshiba AC100
netbook because they're already supported by upstream, later on ASUS TF101
tablet will join them.
I based S/PDIF patches on Arnd's Bergmann patch from a separate series [1]
that removes obsolete slave_id. This eases merging of the patches by
removing the merge conflict. This is a note for Mark Brown.
I also based this series on top of power management series [2]. I.e. [2]
should be applied first, otherwise "Add S/PDIF node to Tegra20 device-tree"
patch should have merge conflict. This is a note for Thierry.
[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=273312
[2] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=274534
Changelog:
v4: - Added patches that update multi_v7_defconfig with the enabled S/PDIF
and APB DMA drivers.
v3: - Renamed S/PDIF device-tree clocks as was suggested by Rob Herring.
- Added r-bs and acks that were given by Rob Herring to v2.
v2: - Corrected I2S yaml problem that was reported by the DT bot for v1
by removing the non-existent required clock-names property.
- Removed assigned-clocks property from S/PDIF yaml since this property
is now inherited from the clocks property.
- Reordered the "tegra20: spdif: Set FIFO trigger level" patch, making
it the first sound/soc patch in the series, like it was suggested by
Mark Brown in the comment to v1. Also reworded commit message of this
patch to *not* make it looks like it should be backported to stable
kernels.
Arnd Bergmann (1):
ASoC: tegra20-spdif: stop setting slave_id
Dmitry Osipenko (21):
ASoC: dt-bindings: Add binding for Tegra20 S/PDIF
ASoC: dt-bindings: tegra20-i2s: Convert to schema
ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate
property
dt-bindings: host1x: Document optional HDMI sound-dai-cells
ASoC: tegra20: spdif: Set FIFO trigger level
ASoC: tegra20: spdif: Support device-tree
ASoC: tegra20: spdif: Improve driver's code
ASoC: tegra20: spdif: Use more resource-managed helpers
ASoC: tegra20: spdif: Reset hardware
ASoC: tegra20: spdif: Support system suspend
ASoC: tegra20: spdif: Filter out unsupported rates
ASoC: tegra20: i2s: Filter out unsupported rates
drm/tegra: hdmi: Unwind tegra_hdmi_init() errors
drm/tegra: hdmi: Register audio CODEC on Tegra20
ARM: tegra_defconfig: Enable S/PDIF driver
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
ARM: tegra: Add S/PDIF node to Tegra20 device-tree
ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio
ARM: tegra: paz00: Enable S/PDIF and HDMI audio
.../display/tegra/nvidia,tegra20-host1x.txt | 1 +
.../bindings/sound/nvidia,tegra20-i2s.txt | 30 ---
.../bindings/sound/nvidia,tegra20-i2s.yaml | 77 +++++++
.../bindings/sound/nvidia,tegra20-spdif.yaml | 85 ++++++++
.../boot/dts/tegra20-acer-a500-picasso.dts | 8 +
arch/arm/boot/dts/tegra20-paz00.dts | 8 +
arch/arm/boot/dts/tegra20.dtsi | 40 +++-
arch/arm/configs/multi_v7_defconfig | 2 +
arch/arm/configs/tegra_defconfig | 1 +
drivers/gpu/drm/tegra/Kconfig | 3 +
drivers/gpu/drm/tegra/hdmi.c | 168 +++++++++++++--
sound/soc/tegra/tegra20_i2s.c | 49 +++++
sound/soc/tegra/tegra20_spdif.c | 197 ++++++++++++------
sound/soc/tegra/tegra20_spdif.h | 1 +
sound/soc/tegra/tegra_pcm.c | 6 +
sound/soc/tegra/tegra_pcm.h | 1 +
16 files changed, 574 insertions(+), 103 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
--
2.33.1
|
|
The i.MX 8QM DTS files use two compatibles, so update the binding to fix
dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: serial@5a060000:
compatible: ['fsl,imx8qm-lpuart', 'fsl,imx8qxp-lpuart'] is too long
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1639680494-23183-2-git-send-email-abel.vesa@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add i.MXRT1050 documentation for compatible string.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Link: https://lore.kernel.org/r/20211215220538.4180616-7-Mr.Bossman075@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
R-Car S4-8 (R8A779F0) SoC has the R-Car Gen4 compatible SCIF ports,
so document the SoC specific bindings.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211209070817.1223888-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds documentation for the SPMI controller found on Mediatek SoCs.
Link: https://lore.kernel.org/r/20211119034613.32489-3-james.lo@mediatek.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: James Lo <james.lo@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20211216190812.1574801-4-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'reg' is controller specific so we shouldn't even be specifying it here.
Just remove it.
Link: https://lore.kernel.org/r/20211119034613.32489-2-james.lo@mediatek.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: James Lo <james.lo@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20211216190812.1574801-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"make dtbs_check":
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
arch/riscv/boot/dts/canaan/sipeed_maix_bit.dt.yaml: dma-controller@50000000: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
The Synopsys DesignWare AXI DMA Controller on the Canaan K210 SoC
exposes its reset signal.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20211125152008.162571-1-geert@linux-m68k.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Extend the binding to support specifying a different request type for
each direction.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-3-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The JZ4760 and JZ4760B SoCs have two additional DMA controllers: the
MDMA, which only supports memcpy operations, and the BDMA which is
mostly used for transfer between memories and the BCH controller.
The JZ4770 also features the same BDMA as in the JZ4760B, but does not
seem to have a MDMA.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206174259.68133-2-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The TI k3-bcdma and k3-pktdma both use 'ti,sci' and 'ti,sci-dev-id'
properties defined in ti,k3-sci-common.yaml. When 'unevaluatedProperties'
support is enabled, the follow warning is generated:
Documentation/devicetree/bindings/dma/ti/k3-bcdma.example.dt.yaml: dma-controller@485c0100: Unevaluated properties are not allowed ('ti,sci', 'ti,sci-dev-id' were unexpected)
Documentation/devicetree/bindings/dma/ti/k3-pktdma.example.dt.yaml: dma-controller@485c0000: Unevaluated properties are not allowed ('ti,sci', 'ti,sci-dev-id' were unexpected)
Add a reference to ti,k3-sci-common.yaml to fix this.
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174226.2298135-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With 'unevaluatedProperties' support implemented, the example has
warnings on primecell properties and 'resets':
Documentation/devicetree/bindings/dma/arm-pl08x.example.dt.yaml: dma-controller@67000000: Unevaluated properties are not allowed ('arm,primecell-periphid', 'resets' were unexpected)
Add the missing reference to primecell.yaml and definition for 'resets'.
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174231.2298349-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add devicetree compatible for dwc3 on SM6350 SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211213082614.22651-7-luca.weiss@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
role-switch-default-mode property may be used with usb-role-switch
property to define the default operation mode (by forcing the a-valid or
b-valid) at init.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1638806203-6624-2-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the compatible string for USB controller for Qualcomm SM8450 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211216113849.659856-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.
Major changes:
rtw88
* debugfs file to fix tx rate
iwlwifi
* support SAR GEO Offset Mapping (SGOM) via BIOS
* support firmware API version 68
* add some new device IDs
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
* tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits)
wcn36xx: Implement beacon filtering
wcn36xx: Fix physical location of beacon filter comment
wcn36xx: Fix beacon filter structure definitions
ath11k: Use reserved host DDR addresses from DT for PCI devices
dt: bindings: add new DT entry for ath11k PCI device support
wilc1000: Improve WILC TX performance when power_save is off
wl1251: specify max. IE length
rsi: fix array out of bound
wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"
wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx
wilc1000: Rename irq handler from "WILC_IRQ" to netdev name
wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"
wilc1000: Fix spurious "FW not responding" error
wilc1000: Remove misleading USE_SPI_DMA macro
wilc1000: Fix missing newline in error message
wilc1000: Fix copy-and-paste typo in wilc_set_mac_address
rtw89: coex: Update COEX to 5.5.8
rtw89: coex: Cancel PS leaving while C2H comes
rtw89: coex: Update BT counters while receiving report
rtw89: coex: Define LPS state for BTC using
...
====================
Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the Broadcom BDC device controller Device Tree binding to YAML
to help with validation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217042001.479577-7-f.fainelli@gmail.com
|
|
Convert the Broadcom STB GISB bus arbiter to YAML to help with
validation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217042001.479577-6-f.fainelli@gmail.com
|
|
Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML
to help with validation.
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217042001.479577-5-f.fainelli@gmail.com
|
|
Renesas DT binding updates for v5.17 (take two)
- Document support for the R-Car S4-8 Spider CPU and BreakOut boards.
* tag 'renesas-dt-bindings-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas Spider boards
Link: https://lore.kernel.org/r/cover.1639736725.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Our usual round of DT patches for the 5.17 merge window, with:
- Introduction of the chassis-type property
- I2C, SPDIF support for the Tanix TX6
- Memory frequency scaling for the A64 and H5
- Hantro G2 support for the H6
- New Board: Tanix TX6 Mini
* tag 'sunxi-dt-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add Hantro G2 node
arm64: dts: allwinner: h6: tanix-tx6: Enable bluetooth
arm64: dts: allwinner: h6: tanix: Add MMC1 node
arm64: dts: allwinner: h6: Add Tanix TX6 mini dts
dt-bindings: arm: sunxi: Add Tanix TX6 mini
arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSI
ARM: dts: sun8i: Adjust power key nodes
arm64: dts: allwinner: a64: Update MBUS node
ARM: dts: sunxi: h3/h5: Update MBUS node
dt-bindings: arm: sunxi: Add H5 MBUS compatible
dt-bindings: arm: sunxi: Expand MBUS binding
dt-bindings: clock: sunxi: Export CLK_DRAM for devfreq
dt-bindings: crypto: Add optional dma properties
ARM: dts: sun8i: h3: beelink-x2: Add GPIO CEC node
ARM: dts: sunxi: Add CEC clock to DW-HDMI
arm64: dts: allwinner: a64: Add CEC clock to HDMI
ARM: dts: sun8i: h3: beelink-x2: Sort nodes
arm64: dts: allwinner: h6: tanix-tx6: Add I2C node
arm64: dts: allwinner: h6: tanix-tx6: Add SPDIF
arm64: dts: allwinner: add 'chassis-type' property
Link: https://lore.kernel.org/r/ef385139-6fd4-42d2-9bfe-a4dda7ac76c9.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document new OPP table and power domain properties of the video decoder
hardware.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Convert NVIDIA Tegra video decoder binding to schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Memory Client should be blocked before hardware reset is asserted in order
to prevent memory corruption and hanging of memory controller.
Document Memory Client resets of Host1x, GR2D and GR3D hardware units.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Document new DVFS OPP table and power domain properties of the Host1x bus
and devices sitting on the bus.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Document sub-nodes which describe Tegra SoC clocks that require a higher
voltage of the core power domain in order to operate properly on a higher
clock rates. Each node contains a phandle to OPP table and power domain.
The root PLLs and system clocks don't have any specific device dedicated
to them, clock controller is in charge of managing power for them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Document Pegatron Chagall, which is Tegra30-based tablet device.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Document Tegra20/30/114-based ASUS Transformer Series tablet devices.
This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG
Infinity TF700T, TF701T.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|