aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2021-10-29ASoC: dt-bindings: cs42l42: Correct description of ts-invRichard Fitzgerald1-6/+7
This swaps the descriptions of the 0 and 1 values to match what the driver actually does with this property. The background here is somewhat confusing. The codec has two invert bits for the tip sense. The DT property should have been for the TIP_SENSE_INV bit, which is the one that controls the detect block. Due to some misunderstanding of the hardware the driver actually implemented setting of the TS_INV bit, which is only for swapping the sense of the interrupt bits. The description was taken from the datasheet and refers to TIP_SENSE_INV but unfortunately TS_INV has a different purpose and the net effect of changing it is the reverse of what was intended (this is not clearly described in the datasheet). So the ts-inv settings have always done the exact opposite of what the description said. Given the age of the driver, it's too late now to swap the meanings of the values, so the description is changed to match the behaviour. They have been annotated with the terminology used in the datasheet to avoid the confusion of which one corresponds to what the datasheet calls "inverted tip sense". Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: da16c5579353 ("ASoC: cs42l42: Add devicetree bindings for CS42L42") Link: https://lore.kernel.org/r/20211028140902.11786-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29dt-bindings: net: lantiq-xrx200-net: Remove the burst length propertiesAleksander Jan Bajkowski1-16/+0
All SoCs with this IP core support 8 burst length. Hauke suggested to hardcode this value and simplify the driver. Link: https://lkml.org/lkml/2021/9/14/1533 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28Merge branch irq/misc-5.16 into irq/irqchip-nextMarc Zyngier1-0/+1
* irq/misc-5.16: : . : Misc irqchip fixes for 5.16: : - MAINTAINERS update for the ARM VIC DT binding : - Allow drivers using the IRQCHIP_PLATFORM_DRIVER_BEGIN/END : infrastructure to use COMPILE_TEST without CONFIG_OF : - DT updates : - Detangle h8300 linux/irqchip.h inclusion : . h8300: Fix linux/irqchip.h include mess dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings irqchip: Fix compile-testing without CONFIG_OF MAINTAINERS: update arm,vic.yaml reference Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-23/+19
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28dt-bindings: dmaengine: bam_dma: Add "powered remotely" modeStephan Gerhold1-0/+2
In some configurations, the BAM DMA controller is set up by a remote processor and the local processor can simply start making use of it without setting up the BAM. This is already supported using the "qcom,controlled-remotely" property. However, for some reason another possible configuration is that the remote processor is responsible for powering up the BAM, but we are still responsible for initializing it (e.g. resetting it etc). Add a "qcom,powered-remotely" property to describe that configuration. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20211018102421.19848-2-stephan@gerhold.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-28dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindingsMarian-Cristian Rotariu1-0/+1
Document SoC specific bindings for RZ/G2H (r8a774e1) SoC. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/53317ce1bdd1d5e517122eb5c8ea0ccaa69eba3b.1635337428.git.geert+renesas@glider.be
2021-10-28dt-bindings: mips: convert Ralink SoCs and boards to schemaSergio Paracuellos2-32/+87
Convert Ralink SoCs and boards bindings to YAML schema. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20211019041659.15761-1-sergio.paracuellos@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-28dt-bindings: display: xilinx: Fix example with psgtrMichal Simek1-2/+2
Commit cea0f76a483d ("dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY") clearly defines #phy-cells as 4. In past 5 cells were used by it never went to upstream. That's why fix example by using only 4 cells instead of 5. Fixes: e7c7970a678d ("dt-bindings: display: xlnx: Add ZynqMP DP subsystem bindings") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/a291be294dea6e580ad9acd436742a48b7cd00a2.1634539210.git.michal.simek@xilinx.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-28dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yamlDavid Heidelberg2-33/+58
Convert bindings for NXP PN544 NFC driver to YAML syntax. Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211017160210.85543-1-david@ixit.cz Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-28dt-bindings: Add a help message when dtschema tools are missingRob Herring1-0/+5
The dtschema version check works, but is not that clear when dtschema is either not installed or not in the PATH. Add a separate check and message if dt-doc-validate is not found. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-28dt-bindings: bus: ti-sysc: Update to use yaml bindingTony Lindgren2-139/+216
Update the binding for ti-sysc interconnect target module driver to yaml format. Note that the old binding was never updated for the need to always specify also the generic compatible "ti,sysc". This is needed for the auxdata for platform clockdomain autoidle related functions. Cc: Rob Herring <robh@kernel.org> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20211015113350.35830-1-tony@atomide.com [robh: dedupe reg-names and clock-names entries] Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-28dt-bindings: sram: Allow numbers in sram region node nameNishanth Menon1-1/+1
Sram regions node name describes the region of reserved memory and can be names such as l3cache@1000. Permit numbers to be used as part of the reserved memory node name. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20211012154833.14111-1-nm@ti.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-28Merge tag 'drm-msm-next-2021-10-26' of https://gitlab.freedesktop.org/drm/msm into drm-nextDave Airlie5-159/+534
* eDP support in DP sub-driver (for newer SoCs with native eDP output) * dpu irq handling cleanup * CRC support for making igt happy * Support for NO_CONNECTOR bridges * dsi: 14nm phy support for msm8953 * mdp5: support for msm8x53, sdm450, sdm632 * various smaller fixes and cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsH9EwcpqGNNRJeL99NvFFjHX3SUg+nTYu0dHG5U9+QuA@mail.gmail.com
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie15-41/+71
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-27dt-bindings: coresight: Add burst size for TMCTanmay Jagdale1-0/+5
Add "arm,max-burst-size" optional property for TMC ETR. If specified, this value indicates the maximum burst size that can be initiated by TMC on the AXI bus. Signed-off-by: Tanmay Jagdale <tanmay@marvell.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210901131049.1365367-2-tanmay@marvell.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-10-27dt-bindings: hwmon: Add nct7802 bindingsOskar Senft1-0/+145
This change documents the device tree bindings for the Nuvoton NCT7802Y driver. Signed-off-by: Oskar Senft <osk@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211020164213.174597-1-osk@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-27Merge tag 'phy-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-nextGreg Kroah-Hartman5-38/+218
Vinod writes: phy-for-5.16 - New support: - Kirin 970 PCIe PHY driver - Qualcomm QCM2290 USB2 and USB3 support - Updates: - Qualcomm synopsis phy driver updates - sc8180x PCIe update - cadence-torrent driver updates for output reference clock - stm32 phy tuning support * tag 'phy-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (28 commits) phy: Sparx5 Eth SerDes: Fix return value check in sparx5_serdes_probe() phy: qcom-snps: Correct the FSEL_MASK phy: hisilicon: Add of_node_put() in phy-hisi-inno-usb2 phy: qcom-qmp: another fix for the sc8180x PCIe definition phy: cadence-torrent: Add support to output received reference clock phy: cadence-torrent: Model reference clock driver as a clock to enable derived refclk dt-bindings: phy: cadence-torrent: Add clock IDs for derived and received refclk phy: cadence-torrent: Migrate to clk_hw based registration and OF APIs phy: ti: gmii-sel: check of_get_address() for failure dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply phy: stm32: add phy tuning support dt-bindings: phy: phy-stm32-usbphyc: add optional phy tuning properties phy: stm32: restore utmi switch on resume dt-bindings: phy: rockchip: remove usb-phy fallback string for rk3066a/rk3188 phy: qcom-qusb2: Fix a memory leak on probe phy: qcom-qmp: Add QCM2290 USB3 PHY support dt-bindings: phy: qcom,qmp: Add QCM2290 USB3 PHY phy: qcom-qusb2: Add missing vdd supply dt-bindings: phy: qcom,qusb2: Add missing vdd-supply phy: rockchip-inno-usb2: Make use of the helper function devm_add_action_or_reset() ...
2021-10-27Merge tag 'extcon-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-nextGreg Kroah-Hartman1-1/+3
Chanwoo writes: Update extcon next for v5.16 Detailed description for this pull request: 1. Add support for TUSB320L and update tusb320 extcon driver - The existing extcon-usbc-tusb320 driver is updated for supporting the mode setting and reset operation. Also, this driver supports the simliar TUSB320L device at the same extcon-usbc-tusb320 extcon provider driver. 2. Use p-unit semaphone lock for register access for extcon-axp288 driver 3. Update the minor clean-up for extcon-max3355 and extcon-usb-gpio driver. * tag 'extcon-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: dt-bindings: extcon: usbc-tusb320: Add TUSB320L compatible string extcon: usbc-tusb320: Add support for TUSB320L extcon: usbc-tusb320: Add support for mode setting and reset extcon: extcon-axp288: Use P-Unit semaphore lock for register accesses extcon: max3355: Drop unused include extcon: usb-gpio: Use the right includes
2021-10-27ASoC: dt-bindings: max98520: add initial bindingsGeorge Song1-0/+36
add initial bindings for max98520 audio amplifier Signed-off-by: George Song <george.song@maximintegrated.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211027001431.363-1-george.song@maximintegrated.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-27ASoC: meson: t9015: Add missing AVDD-supply propertyAlexander Stein1-0/+6
Fixes the schema check warning "audio-controller@32000: 'AVDD-supply' do not match any of the regexes: 'pinctrl-[0-9]+'" Fixes: 5c36abcd2621 ("ASoC: meson: add t9015 internal codec binding documentation") Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Link: https://lore.kernel.org/r/20211026182754.900688-1-alexander.stein@mailbox.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-27dt-bindings: extcon: usbc-tusb320: Add TUSB320L compatible stringYassine Oudjana1-1/+3
Add a compatible string for TUSB320L. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-26dt-bindings: clock: u8500: Rewrite in YAML and extendLinus Walleij2-64/+121
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them with the PRCC reset controller. The bindings are a bit idiomatic but it just reflects their age, the ux500 platform was used as guinea pig for early device tree conversion of platforms in 2015. The new subnode for the reset controller follows the pattern of the old bindings and adds a node with reset-cells for this. Cc: devicetree@vger.kernel.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-1-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-27dt-bindings: pinctrl: Add apple,npins property to apple,pinctrlJoey Gouly1-0/+6
This property is used to describe the total number of pins on this particular pinctrl hardware block. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026175815.52703-4-joey.gouly@arm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-27dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrlJoey Gouly1-0/+4
The GPIO/pinctrl hardware can act as an interrupt-controller, so add the #interrupt-cells property to the binding. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026175815.52703-3-joey.gouly@arm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-26Merge tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann2-0/+7
Qualcomm ARM64 DTS additional patches for v5.16 The RPM and RPMh sleep stats are introduced on a number of platforms, to aid the enablement of entering low power mode. The MSM8916 support receives some polishing touches, followed by introduction of the necessary pieces to use the DeviceTree on 32-bit variants of the MSM8916 platform, in particular to boot the secondary CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition is introduced. The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support. MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5 gained a description of its LCD panel. The Trogdor device on SC7180 gained support for a second source eDP brigde, while SC7280 gains PCIe support and the newly introduced Herobrine device. Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour of the newly introduced support for specifying the compatible directly on the reserved-memory node. The SM7225 platform is introduced, as a derrivative of SM6350, initial support for the PM6350 PMIC and based on this the Fairphone 4 is introduced. The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs to be baked into a single boot.img that can be booted on both devices. As the GDSC driver has been extended to properly describe the relationship between MMCX and MDSS_GDSC, the now deprecated mmcx regulator is removed from SM8250. SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was also added for SM8150 and the SA8155p ADP got a couple of remoteprocs enabled. Additionally a number of DT validation issues was corrected across the various platforms and devices. * tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits) Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: sdm630: Add disabled Venus support arm64: dts: qcom: pm660l: Remove board-specific WLED configuration arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26dt-bindings: watchdog: mtk-wdt: add disable_wdt_extrst supportFengquan Chen1-0/+2
This patch add a description and example of disable_wdt_extrst element for watchdog on MTK Socs Signed-off-by: Fengquan Chen <fengquan.chen@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210914123454.32603-2-Fengquan.Chen@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26dt-bindings: watchdog: sunxi: Add compatibles for D1Samuel Holland1-0/+6
D1 keeps the same register layout and clock sources as the R329, but it adds a key field which must be set to update the watchdog's "CFG" and "MODE" registers. Therefore it is not backward-compatible. Similarly to the R329, the D1 has three watchdog instances, and only one of them has the "soft reset" registers. So that instance needs an extra compatible string. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210902225750.29313-3-samuel@sholland.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26dt-bindings: watchdog: sunxi: Add compatibles for R329Samuel Holland1-1/+41
On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M) divided by 750. However, starting with R329, LOSC (OSC32k) is added as an alternative clock source, with a bit to switch between them. Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the cycle counts to keep the timeouts independent of the clock source. This keeps the programming interface backward-compatible. Furthermore, the R329 has two watchdogs: one for use by the ARM CPUs at 0x20000a0, and a second one for use by the DSPs at 0x7020400. The first of these adds two more new registers, to allow software to immediately assert the SoC reset signal. Add an additional "-reset" suffix to signify the presence of this feature. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210902225750.29313-2-samuel@sholland.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26Merge series "Update Lpass digital codec macro drivers" from Srinivasa Rao Mandadapu <srivasam@codeaurora.org>:Mark Brown4-4/+12
This patch set is to add support for lpass sc7280 based targets. Upadate compatible name and change of bulk clock voting to optional clock voting in digital codecs va, rx, tx macro drivers. Changes Since V3: -- Removed fixes tag. -- Change signedoff by sequence. Changes Since V2: -- Add Tx macro deafults for lpass sc7280 Changes Since V1: -- Removed individual clock voting and used bulk clock optional. -- Removed volatile changes and fixed default values. -- Typo errors. Srinivasa Rao Mandadapu (5): ASoC: qcom: Add compatible names in va,wsa,rx,tx codec drivers for sc7280 ASoC: qcom: dt-bindings: Add compatible names for lpass sc7280 digital codecs ASoC: codecs: tx-macro: Enable tx top soundwire mic clock ASoC: codecs: tx-macro: Update tx default values ASoC: codecs: Change bulk clock voting to optional voting in digital codecs .../bindings/sound/qcom,lpass-rx-macro.yaml | 4 +++- .../bindings/sound/qcom,lpass-tx-macro.yaml | 4 +++- .../bindings/sound/qcom,lpass-va-macro.yaml | 4 +++- .../bindings/sound/qcom,lpass-wsa-macro.yaml | 4 +++- sound/soc/codecs/lpass-rx-macro.c | 3 ++- sound/soc/codecs/lpass-tx-macro.c | 25 +++++++++++++++++++--- sound/soc/codecs/lpass-va-macro.c | 3 ++- sound/soc/codecs/lpass-wsa-macro.c | 1 + 8 files changed, 39 insertions(+), 9 deletions(-) -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
2021-10-26Merge tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann1-2/+3
Qualcomm DTS more changes for v5.16 The multi-purpose-pin (MPP) driver is finally migrated to use hierarchical IRQ domains, so this bring the associated changes. The remainder of the changes are correcting binding issues, primarily found through DT validation. * tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits) ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node ARM: dts: qcom: fix thermal zones naming ARM: dts: qcom: fix flash node naming for RB3011 ARM: dts: qcom: correct mmc node naming ARM: dts: qcom: fix memory and mdio nodes naming for RB3011 dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts dt-bindings: arm: qcom-ipq4019: add missing device compatible ARM: dts: qcom: apq8026-lg-lenok: rename board vendor dt-bindings: arm: qcom: rename vendor of apq8026-lenok ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548 ARM: dts: qcom-pma8084: add interrupt controller properties ARM: dts: qcom-pm8941: add interrupt controller properties ARM: dts: qcom-pm8841: add interrupt controller properties ARM: dts: qcom-msm8660: add interrupt controller properties ARM: dts: qcom-mdm9615: add interrupt controller properties ARM: dts: qcom-apq8064: add interrupt controller properties ARM: dts: qcom-apq8060-dragonboard: fix mpps state names ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name ... Link: https://lore.kernel.org/r/20211026135855.1205262-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 supportChester Lin1-0/+1
Add support for the SDHC binding of S32G2. Signed-off-by: Chester Lin <clin@suse.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Link: https://lore.kernel.org/r/20211021071333.32485-2-clin@suse.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-26Merge tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/driversArnd Bergmann5-6/+86
More Qualcomm driver updates for v5.16 This introduces the Qualcomm "sleep stats" driver, which aids the efforts of bringing various Qualcomm platforms into low power mode. The SMP2P driver gains support for negotiating the "SSR" feature, which is used to better synchronize some corner cases that might appear as the remoteproc is recovering from a crash. The socinfo driver learns about a few new PMICs. SMEM is updated so that it's possible to put the compatible property directly in the reserved-memory node, to avoid having to have a separate node just pointing to the memory-region. Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably avoiding the issue where powering on a power-domain using rpmhpd while keeping the performance_state at 0 is a nop * tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: qcom: smp2p: add feature negotiation and ssr ack feature support soc: qcom: Add Sleep stats driver dt-bindings: Introduce QCOM Sleep stats bindings soc: qcom: socinfo: add two missing PMIC IDs soc: qcom: rpmhpd: Make power_on actually enable the domain soc: qcom: smem: Support reserved-memory description dt-bindings: soc: smem: Make indirection optional dt-bindings: sram: Document qcom,rpm-msg-ram Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/driversArnd Bergmann1-2/+3
Samsung SoC drivers changes for v5.16 1. Convert Exynos ChipID and ASV driver to a module and make it a default, instead of selected. The driver is not essential, so it could be disabled, if needed. 2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV driver. 3. Get rid of HAVE_S3C_RTC because it was adding just another layer instead of direct dependencies. 4. Minor cleanups. * tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: exynos-chipid: add exynosautov9 SoC support rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies soc: samsung: exynos-chipid: Add Exynos850 support dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible soc: samsung: exynos-chipid: Pass revision reg offsets soc: samsung: pm_domains: drop unused is_off field arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID soc: samsung: exynos-chipid: do not enforce built-in soc: samsung: exynos-chipid: convert to a module soc: samsung: exynos-chipid: avoid soc_device_to_device() soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'thermal-v5.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linuxRafael J. Wysocki3-10/+163
Pull thermal core and ARM thermal driver updates for v5.16 from Daniel Lezcano: - Constify a variable in thermal mmio driver (Rikard Falkeborn) - Add the current temperature in the netlink message when crossing a trip point in order to prevent useless back and forth reading from userspace (Daniel Lezcano) - Add support for the 'HC' variant on PM8998 pmic in order to support vadc channels on recent QCom boards (Bjorn Andersson) - Add support of calibration values from hardware when they are fused (Niklas Söderlund) - Fix NULL pointer dereference from the thermal_release callback when an error occured in the thermal_zone_device_register() function (Yuanzheng Song) - Fix use after free call in the __thermal_cooling_device_register() function in the error path (Ziyang Xuan) - Fix compilation error for the LMh driver when CONFIG_QCOM_SCM is not set (Jackie Liu) - Add a timeout when reading a register which can block forever under certain circumstances in the tsens driver (Ansuel Smith) - Add DT binding for the reset lines and use them in the rockchip sensor driver (Johan Jonker) - Add new uniphier NX1 SoC temperature sensor (Kunihiko Hayashi) - Save and restore the TCC value in the int340x driver (Antoine Tenart) - Deprecate the cooling device state sysfs file writable and the user space governor (Daniel Lezcano) * tag 'thermal-v5.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/core: Deprecate changing cooling device state from userspace thermal/core: Make the userspace governor deprecated thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume thermal/drivers/uniphier: Add compatible string for NX1 SoC dt-bindings: thermal: uniphier: Add binding for NX1 SoC thermal/drivers/rockchip_thermal: Allow more resets for tsadc node dt-bindings: thermal: remove redundant comments from rockchip-thermal.yaml dt-bindings: thermal: allow more resets for tsadc node in rockchip-thermal.yaml thermal/drivers/tsens: Add timeout to get_temp_tsens_valid thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM thermal/core: fix a UAF bug in __thermal_cooling_device_register() thermal/core: Fix null pointer dereference in thermal_release() thermal: rcar_gen3_thermal: Read calibration from hardware thermal: rcar_gen3_thermal: Store thcode and ptat in priv data thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings thermal/drivers/netlink: Add the temperature when crossing a trip point thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops
2021-10-26ASoC: dt-bindings: add q6apm digital audio stream bindingsSrinivas Kandagatla1-0/+53
On AudioReach audio Framework, Audio Streams (PCM/Compressed) are managed by Q6APM(Audio Process Manager) service. This patch adds bindings for this DAIs exposed by the DSP. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026111655.1702-9-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26ASoC: dt-bindings: lpass-clocks: add q6prm clocks compatibleSrinivas Kandagatla1-0/+21
On AudioReach audio Framework access to LPASS ports is via Q6PRM (Proxy Resource Manager) service, so add a dedicated lpass-clock compatible string for this. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026111655.1702-8-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26ASoC: dt-bindings: q6dsp: add q6apm-lpass-dai compatibleSrinivas Kandagatla1-0/+27
on AudioReach audio Framework access to LPASS ports is via Q6APM(Audio Process Manager) service, so add a dedicated compatible string for this. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026111655.1702-7-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26ASoC: dt-bindings: move LPASS clocks related bindings out of q6afeSrinivas Kandagatla2-23/+56
q6afe (Audio Front End) is one of the DSP service that handles both LPASS (Low Power Audio SubSystem) Audio ports and LPASS clocks. As LPASS is a hardwware IP and commonly used by Qualcomm Audio DSP. In order to allow multiple DSP frameworks to use these bindings its best to move it out from the dsp specific bindings. For compatibility reasons and not breaking which is already working we still maintain same compatible string "qcom,q6afe-clocks" Also as part of this change convert these LPASS clocks related bindings into yaml format. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026111655.1702-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26ASoC: dt-bindings: move LPASS dai related bindings out of q6afeSrinivas Kandagatla2-158/+178
q6afe (Audio Front End) is one of the DSP service that handles both LPASS (Low Power Audio SubSystem) Audio ports and LPASS clocks. As LPASS is a hardwware IP and commonly used by Qualcomm Audio DSP. In order to allow multiple DSP frameworks to use these bindings its best to move it out from the dsp specific bindings. For compatibility reasons and not breaking which is already working we still maintain same compatible string "qcom,q6afe-dais" Also as part of this change convert these LPASS dai related bindings into yaml format. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211026111655.1702-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26Merge tag '20210927135559.738-6-srinivas.kandagatla@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into v11_20211026_srinivas_kandagatla_asoc_qcom_add_audioreach_support for audioreach supportMark Brown2-134/+177
v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org This immutable branch is based on v5.15-rc1 and contains the following patches extending the existig APR driver to also implement GPR: 20210927135559.738-2-srinivas.kandagatla@linaro.org 20210927135559.738-3-srinivas.kandagatla@linaro.org 20210927135559.738-4-srinivas.kandagatla@linaro.org 20210927135559.738-5-srinivas.kandagatla@linaro.org 20210927135559.738-6-srinivas.kandagatla@linaro.org
2021-10-26ASoC: qcom: dt-bindings: Add compatible names for lpass sc7280 digital codecsSrinivasa Rao Mandadapu4-4/+12
Update compatible names in va, wsa, rx and tx macro codes for lpass sc7280 Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1635234188-7746-3-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supplyShawn Guo1-24/+31
The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply' are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the bindings to reflect it. While at it, also correct the clock properties for IPQ8074 QMP PCIe PHY. And as the result, 'qcom,ipq8074-qmp-pcie-phy' and 'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply bindings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211020130634.26194-1-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dt-bindings: phy: phy-stm32-usbphyc: add optional phy tuning propertiesAmelie Delaunay1-0/+129
This patch adds the description of new optional phy tuning properties for usbphyc phy sub nodes. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211015161427.220784-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dt-bindings: phy: rockchip: remove usb-phy fallback string for rk3066a/rk3188Johan Jonker1-7/+4
With the conversion of rockchip-usb-phy.yaml a long time used fallback string for rk3066a/rk3188 was added. The linux driver doesn't do much with the GRF phy address range, however the u-boot driver rockchip_usb2_phy.c does. The bits in GRF_UOC0_CON2 for rk3066a/rk3188 and rk3288 for example don't match. Remove the usb-phy fallback string for rk3066a/rk3188 to prevent possible strange side effects. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210828111218.10026-1-jbx6244@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dt-bindings: phy: qcom,qmp: Add QCM2290 USB3 PHYShawn Guo1-0/+27
Add support for USB3 PHY found on Qualcomm QCM2290 SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210927064829.5752-2-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-25Merge tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds2-23/+19
Pull pin control fixes from Linus Walleij: "Some late pin control fixes, the most generally annoying will probably be the AMD IRQ storm fix affecting the Microsoft surface. Summary: - Three fixes pertaining to Broadcom DT bindings. Some stuff didn't work out as inteded, we need to back out - A resume bug fix in the STM32 driver - Disable and mask the interrupts on probe in the AMD pinctrl driver, affecting Microsoft surface" * tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: disable and mask interrupts on probe pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume() Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode" dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"
2021-10-25dt-bindings: ili9881c: add rotation propertyJohn Keeping1-0/+1
Allow the standard rotation property from panel-common for ILI9881C based panels. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-3-john@metanate.com
2021-10-25dt-bindings: ili9881c: add missing panel-common inheritanceJohn Keeping1-0/+3
The properties below refer to items in panel-common.yaml, which means that needs to be referenced in the schema. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-2-john@metanate.com
2021-10-25Merge drm/drm-next into drm-misc-nextMaxime Ripard5-3/+145
drm-misc-next hasn't been updated in a while and I need a post -rc2 state to merge some vc4 patches. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-10-25ASoC: dt-bindings: wlf,wm8962: Convert to json-schemaGeert Uytterhoeven2-43/+118
Convert the Wolfson WM8962 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema. Add missing *-supply and port properties. Update the example. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/b0868d2f62fd57499c79d96298e99e5f9e4fbc76.1634565154.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.