aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2021-10-12dt-bindings: net: wireless: Convert ESP ESP8089 binding to a schemaMaxime Ripard2-30/+43
The ESP8089 Wireless Chip is supported by Linux (through an out-of-tree driver) thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: "David S. Miller" <davem@davemloft.net> Cc: de Goede <hdegoede@redhat.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210924072756.869731-4-maxime@cerno.tech
2021-10-12dt-bindings: net: dwmac: Fix typo in the R40 compatibleMaxime Ripard2-5/+5
Even though both the driver and the device trees all use the allwinner,sun8i-r40-gmac compatible, we documented the compatible as allwinner,sun8i-r40-emac in the binding. Let's fix this. Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: netdev@vger.kernel.org Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210924072756.869731-3-maxime@cerno.tech
2021-10-12dt-bindings: bluetooth: realtek: Add missing max-speedMaxime Ripard1-0/+2
additionalProperties prevent any property not explicitly defined in the binding to be used. Yet, some serial properties like max-speed are valid and validated through the serial/serial.yaml binding. Even though the ideal solution would be to use unevaluatedProperties instead, it's not pratical due to the way the bus bindings have been described. Let's add max-speed to remove the warning. Cc: Alistair Francis <alistair@alistair23.me> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210924072756.869731-2-maxime@cerno.tech
2021-10-12dt-bindings: bluetooth: broadcom: Fix clocks checkMaxime Ripard1-2/+15
The original binding was mentioning that valid values for the clocks and clock-names property were one or two clocks from extclk, txco and lpo, with extclk being deprecated in favor of txco. However, the current binding lists a valid array as extclk, txco and lpo, with either one or two items. While this looks similar, it actually enforces that all the device trees use either ["extclk"], or ["extclk", "txco"]. That doesn't make much sense, since the two clocks are said to be equivalent, with one superseeding the other. lpo is also not a valid clock anymore, and would be as the third clock of the list, while we could have only this clock in the previous binding (and in DTs). Let's rework the clock clause to allow to have either: - extclk, and mark it a deprecated - txco alone - lpo alone - txco, lpo While ["extclk", "lpo"] wouldn't be valid, it wasn't found in any device tree so it's not an issue in practice. Similarly, ["lpo", "txco"] is still considered invalid, but it's generally considered as a best practice to fix the order of clocks. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210924072756.869731-1-maxime@cerno.tech
2021-10-12Merge tag 'ti-k3-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dtArnd Bergmann1-2/+13
Devicetree changes for TI K3 platforms for v5.16 merge window: * New Platforms: - AM654: Siemens IOT2050 PG2 boards - J721E: Low cost SK board * New features: - mmc aliases introduced - AM64 ICSSG nodes, mcu pinctrl added * Fixes: - Schema fixups for pcie, thermal zones - Fixup to include board specific property for J721e-evm and j7200-evm - Misc fixups including cleaning up order in Makefile * tag 'ti-k3-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (24 commits) arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes arm64: dts: ti: Add support for J721E SK dt-bindings: arm: ti: Add compatible for J721E SK arm64: dts: ti: iot2050: Add support for product generation 2 boards arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores arm64: dts: ti: iot2050: Disable SR2.0-only PRUs arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible arm64: dts: ti: k3-j721e-common-proc-board: Add j721e-evm compatible dt-bindings: arm: ti: Add missing compatibles for j721e/j7200 evms arm64: dts: ti: Makefile: Collate AM64 platforms together arm64: dts: ti: k3-am64-main: Add ICSSG nodes arm64: dts: ti: k3-am65: Relocate thermal-zones to SoC specific location arm64: dts: ti: ti-k3*: Introduce aliases for mmc nodes arm64: dts: ti: k3-am65-main: Cleanup "ranges" property in "pcie" DT node arm64: dts: ti: j7200-main: Add *max-virtual-functions* for pcie-ep DT node arm64: dts: ti: j7200-main: Fix "bus-range" upto 256 bus number for PCIe ... Link: https://lore.kernel.org/r/20211012120817.beqhp4tygnf3xyi5@wireless Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-12arm64: dts: exynos: add minimal support for exynosautov9 sadk boardChanho Park1-0/+6
SADK(Samsung Automotive Development Kit) is the development kit to evaluate Exynos Auto v9 SoC. It has 16GB LPDDR4 DRAM and two 256GB Samsung UFS. This patch enables only serial console and ufs0 device. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20211012002314.38965-4-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-10-12dt-bindings: mmc: arasan,sdci: Drop clock-output-names from dependenciesKrzysztof Kozlowski1-1/+0
The schema defines dependency only of clock-output-names on #clock-cells. The dependency in opposite direction - requirement of clock-output-names if #clock-cells is defined - should be explicitly included in the bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211004151646.73599-1-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12dt-bindings: mmc: cdns: document Microchip MPFS MMC/SDHCI controllerKrzysztof Kozlowski1-0/+1
The Microchip PolarFire SoC FPGA DTSI uses Cadence SD/SDIO/eMMC Host Controller without any additional vendor compatible: arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: mmc@20008000: compatible:0: 'cdns,sd4hc' is not one of ['socionext,uniphier-sd4hc'] arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: mmc@20008000: compatible: ['cdns,sd4hc'] is too short Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210927125044.20046-1-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12dt-bindings: sdhci-omap: Document ti,non-removable property as deprecatedTony Lindgren1-0/+3
Nowadays the standard non-removable property should be used, but we still need to parse the ti,non-removable too. Let's document it as a deprecated property. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210924073441.7835-1-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12dt-bindings: mmc: mtk-sd: Add hs400 dly3 settingWenbin Mei1-0/+12
Add hs400 dly3 setting for mtk-sd yaml Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210917124803.22871-2-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12dt-bindings: mmc: sdhci-msm: Add compatible string for msm8226Luca Weiss1-0/+1
Add msm8226 SoC specific compatible strings for qcom-sdhci controller. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210911232707.259615-3-luca@z3ntu.xyz Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12dt-bindings: mmc: Add bindings for Intel Thunder Bay SoCRashmi A1-0/+25
Add documentation for Arasan SDHCI controller in Thunder Bay SOC. Signed-off-by: Rashmi A <rashmi.a@intel.com> Link: https://lore.kernel.org/r/20210829182443.30802-3-rashmi.a@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12dt-bindings: mmc: Convert MMC Card binding to a schemaMaxime Ripard3-36/+48
MMC Cards can have an optional Device Tree binding to add non-discoverable properties. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Some of these properties were already described in the MMC controller binding, even though they are not generic and do not apply to any device, so we took the occasion to fix this. Cc: linux-mmc@vger.kernel.org Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210901091852.479202-31-maxime@cerno.tech Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-11dt-bindings: memory: add binding for Mediatek's MT7621 SDRAM memory controllerSergio Paracuellos1-0/+30
Add binding documentation for Mediatek's SDRAM memory controller present on MT7621 SoC. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20211002060910.30613-1-sergio.paracuellos@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-11dt-bindings: devfreq: rk3399_dmc: fix clocks in exampleChukun Pan1-1/+1
The clocks in the example use 'SCLK_DDRCLK', which does not exist in the rk3399-cru.h, correct it to 'SCLK_DDRC'. Ref: commit 7fbdfcd68783 ("clk: rockchip: add SCLK_DDRC id for rk3399 ddrc") Fixes: c1ceb8f7c167 ("Documentation: bindings: add dt documentation for rk3399 dmc") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20211001150024.18672-1-amadeus@jmu.edu.cn Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-12Merge tag 'at91-soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/socArnd Bergmann1-0/+12
AT91 SoC #1 for 5.16: - Documentation for sama7g5 and lan966 families - Kconfig entry for lan966 new SoC. * tag 'at91-soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: add basic support for new SoC family lan966 dt-bindings: arm: at91: Document lan966 pcb8291 and pcb8290 boards ARM: at91: Documentation: add lan966 family ARM: at91: Documentation: add sama7g5 family Link: https://lore.kernel.org/r/20211011124650.17218-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11Merge tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtArnd Bergmann2-0/+16
AT91 DT #1 for 5.16: - Addition of a new variant in the sama5d2 family: the sama5d29 with significant updates being CAN and Ethernet controllers; - Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were maintained up to this moment, separately, in OpenWrt tree; - Two more boards gained I2C bus recovery support; - Tse850 updated with one Ethernet fix; - Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support. * tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: dts: sama5d29: Add dtsi file for sama5d29 ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support ARM: dts: at91: tse850: the emac<->phy interface is rmii ARM: dts: at91: add Exegin Q5xR5 board dt-bindings: ARM: at91: document exegin q5xr5 board dt-bindings: add vendor prefix for exegin ARM: dts: at91: add CalAmp LMU5000 board dt-bindings: ARM: at91: document CalAmp LMU5000 board dt-bindings: add vendor prefix for calamp ARM: dts: at91: at91sam9260: add pinctrl label ARM: dts: at91-sama5d27_som1_ek: Added I2C bus recovery support ARM: dts: at91: sama7g5ek: enable ADC on the board ARM: dts: at91: sama7g5: add node for the ADC ARM: dts: at91: sama5d27_wlsom1: add wifi device Link: https://lore.kernel.org/r/20211011123438.16562-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11Merge tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dtArnd Bergmann1-0/+1
mt7623: add USB nodes mt7629: update PCIe node to new format * tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: arm: Add MT6589 Fairphone 1 ARM: dts: mediatek: Update MT7629 PCIe node for new format arm: dts: mt7623: add otg nodes for bpi-r2 arm: dts: mt7623: add musb device nodes Link: https://lore.kernel.org/r/7135d46f-5fb9-b46d-96d4-3b38548fe23e@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11Merge tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dtArnd Bergmann2-1/+107
dt-bindings: Changes for v5.16-rc1 This contains the DT bindings for the NVDEC hardware video decoder found on Tegra210 and later chips as well as a node name fix for the examples in the Tegra194 PCIe controller (endpoint mode) DT bindings. * tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: PCI: tegra194: Fix PCIe endpoint node names dt-bindings: Add YAML bindings for NVDEC Link: https://lore.kernel.org/r/20211008201132.1678814-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11dt-bindings: arm: Add bindings for Unisoc's UMS512Chunyan Zhang1-0/+5
Added bindings for Unisoc's ums512-1h10 board and ums512 SoC. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211008034533.343167-2-zhang.lyra@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11Merge tag 'amlogic-arm64-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dtArnd Bergmann2-0/+5
Amlogic ARM64 DT changes for v5.16: - New Boards (with bindings): - Radxa Zero - Jethub D1 & H1 home automation controllers - Misc Changes: - add Ethernet PHY reset line for ODROID-C4/HC4 - add audio playback nodes to rbox-pro - Fix the pwm regulator supply properties - meson-g12b-odroid-n2: add missing 5v regulator gpio * tag 'amlogic-arm64-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio arm64: dts: meson-sm1: Fix the pwm regulator supply properties arm64: dts: meson-g12b: Fix the pwm regulator supply properties arm64: dts: meson-g12a: Fix the pwm regulator supply properties arm64: dts: meson: add audio playback to rbox-pro arm64: dts: meson-axg: add support for JetHub D1 arm64: dts: meson-gxl: add support for JetHub H1 dt-bindings: vendor-prefixes: add jethome prefix dt-bindings: arm: amlogic: add bindings for Jethub D1/H1 arm64: dts: amlogic: add support for Radxa Zero dt-bindings: arm: amlogic: add support for Radxa Zero arm64: dts: meson: sm1: add Ethernet PHY reset line for ODROID-C4/HC4 Link: https://lore.kernel.org/r/cc0a3af0-b1b1-dbe1-f553-cf58a1c63d0b@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11Merge tag 'zynqmp-dt-for-v5.16-v2' of https://github.com/Xilinx/linux-xlnx into arm/dtArnd Bergmann1-0/+16
arm64: dts: ZynqMP DT changes for v5.16-v2 - Add support for Kria SOM board * tag 'zynqmp-dt-for-v5.16-v2' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Add support for Xilinx Kria SOM board Link: https://lore.kernel.org/r/9815867c-ffbb-fc9d-64b9-badee5e2862b@xilinx.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11Merge tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/driversArnd Bergmann1-0/+1
Memory controller drivers for v5.16 1. Renesas RPC: fix unaligned bus access and QSPI data transfers in manual modes. 2. Renesas RPC: select RESET_CONTROLLER as it is necessary for operation. 3. FSL IFC: fix error paths. 4. Broadcom: allow building as module. * tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module memory: samsung: describe drivers in KConfig memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode dt-bindings: rpc: renesas-rpc-if: Add support for the R8A779A0 RPC-IF Link: https://lore.kernel.org/r/20211010175836.13302-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11Merge tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/driversArnd Bergmann2-1/+36
Memory controller drivers for v5.14 - Mediatek Add MT8195 support to the Mediatek SMI memory controller driver. This brings also several cleanups and minor enhancements before adding actual new device support. * tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: MAINTAINERS: Add entry for MediaTek SMI memory: mtk-smi: mt8195: Add initial setting for smi-larb memory: mtk-smi: mt8195: Add initial setting for smi-common memory: mtk-smi: mt8195: Add smi support memory: mtk-smi: Use devm_platform_ioremap_resource memory: mtk-smi: Add clocks for smi-sub-common memory: mtk-smi: Add device link for smi-sub-common memory: mtk-smi: Add error handle for smi_probe memory: mtk-smi: Adjust some code position memory: mtk-smi: Rename smi_gen to smi_type memory: mtk-smi: Use clk_bulk clock ops dt-bindings: memory: mediatek: Add mt8195 smi sub common dt-bindings: memory: mediatek: Add mt8195 smi binding Link: https://lore.kernel.org/r/20211010175836.13302-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-11dt-bindings: i2c: Add Apple I2C controller bindingsSven Peter1-0/+61
The Apple I2C controller is based on the PASemi I2C controller. It is present on Apple SoCs such as the M1. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-10-11dt-bindings: memory-controllers: ti,gpmc: Convert to yamlRoger Quadros2-157/+172
Convert omap-gpmc.txt to ti,gpmc.yaml. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-11dt-bindings: mtd: ti,gpmc-onenand: Convert to yamlRoger Quadros2-48/+81
Convert gpmc-onenand.txt to ti,gpmc-onenand.yaml. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-11dt-bindings: mtd: ti,gpmc-nand: Convert to yamlRoger Quadros2-147/+121
Convert gpmc-nand.txt to ti,gpmc-nand.yaml. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-11dt-bindings: memory-controllers: Introduce ti,gpmc-childRoger Quadros1-0/+245
This binding is meant for the child nodes of the TI GPMC node. The node represents any device connected to the GPMC bus. It may be a Flash chip, RAM chip or Ethernet controller, etc. These properties are meant for configuring the GPMC settings/timings and will accompany the bindings supported by the respective device. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-11dt-bindings: net: Remove gpmc-eth.txtRoger Quadros1-97/+0
There is no GPMC Ethernet compatible or device driver. GPMC is just a bus interface over which devices like Ethernet controller can be to. For SMSC 911x Ethernet chip bindings, please refer to Documentation/devicetree/bindings/net/smsc,lan9115.yaml Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-11dt-bindings: mtd: Remove gpmc-nor.txtRoger Quadros1-98/+0
There is no GPMC NOR compatible or device driver. GPMC is just a bus interface over which standard (CFI/JEDC) NOR Flash chips can be attached. For NOR chip bindings, please refer to Documentation/devicetree/bindings/mtd/mtd-physmap.yaml Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-11Merge 5.15-rc5 into usb-nextGreg Kroah-Hartman12-18/+50
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-11Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-0/+7
drm-misc-next for v5.16: UAPI Changes: - Allow empty drm leases for creating separate GEM namespaces. Cross-subsystem Changes: - Slightly rework dma_buf_poll. - Add dma_resv_for_each_fence_unlocked to iterate, and use it inside the lockless dma-resv functions. Core Changes: - Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing. - Add more DP2 headers. - fix CONFIG_FB dependency in fb_helper. - Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888. - Fix crash on a 0 or invalid EDID. Driver Changes: - Apply and revert DRM_MODESET_LOCK_ALL_BEGIN. - Add mode_valid to ti-sn65dsi86 bridge. - Support multiple syncobjs in v3d. - Add R8, RGB332 and RGB888 pixel formats to GUD. - Use devm_add_action_or_reset in dw-hdmi-cec. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
2021-10-10dt-bindings: add bindings for the Sharp LS060T1SX01 panelDmitry Baryshkov1-0/+56
Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel using NT35695 driver. This panel can be found i.e. in the Dragonboard Display Adapter bundle. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-2-dmitry.baryshkov@linaro.org
2021-10-10dt-bindings: display: bridge: lvds-codec: Document LVDS data mapping selectMarek Vasut1-1/+32
Decoder input LVDS format is a property of the decoder chip or even its strapping. Add DT property data-mapping the same way lvds-panel does, to define the LVDS data mapping. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211010144919.38392-1-marex@denx.de
2021-10-10dt-bindings: serial: 8250_omap: allow serdev subnodesAndreas Kemnade1-1/+1
additionalProperties: false ignores the pattern matching for serdev objects in serial.yaml, causing error messages when serdev subnodes like bluetooth or gnss devices are defined. Using unevaluatedProperties instead is the correct way if arbitrary children nodes can appear. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20211001211731.2923066-1-andreas@kemnade.info Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-09Revert "dt-bindings: add bindings for the Sharp LS060T1SX01 panel"Sam Ravnborg1-56/+0
This reverts commit 230a6f0e6f49 ("dt-bindings: add bindings for the Sharp LS060T1SX01 panel") It was pushed to drm-misc-next by accident. Added my own ack to expedit the revert. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-2-dmitry.baryshkov@linaro.org
2021-10-09dt-bindings: add bindings for the Sharp LS060T1SX01 panelDmitry Baryshkov1-0/+56
Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel using NT35695 driver. This panel can be found i.e. in the Dragonboard Display Adapter bundle. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-2-dmitry.baryshkov@linaro.org
2021-10-09dt-bindings: display: simple: hardware can use ddc-i2c-busDavid Heidelberg1-0/+1
Both hardware and driver can communicate DDC over i2c bus. Fixes warnings as: arch/arm/boot/dts/tegra20-paz00.dt.yaml: panel: 'ddc-i2c-bus' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /home/runner/work/linux/linux/Documentation/devicetree/bindings/display/panel/panel-simple.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210927214503.36012-1-david@ixit.cz
2021-10-09dt-bindings: display: simple: add Innolux G070Y2-T02 panelOleksij Rempel1-0/+2
Add binding for the Innolux G070Y2-T02 panel. It is 7" WVGA (800x480) TFT LCD panel with TTL interface and a backlight unit. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210930100501.15690-1-o.rempel@pengutronix.de
2021-10-09dt-bindings: display: simple: Add Vivax TPC-9150 panelNikola Pavlica1-0/+2
This tablet display is unique and hence must be added to documentation. Unfortunately, it's real make and number is not known due to obscure and missing documentation and lack of writing on the display assembly itself. So the natural alternative that came to mind is to name the panel after the device that contained it (an Android tablet). Hopefully that isn't an issue. I can confirm that the parameters that I've obtained are correct since they came from a dump of the original Android OS. Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211002202905.509437-2-pavlica.nikola@gmail.com
2021-10-09dt-bindings: add vendor prefix for VivaxNikola Pavlica1-0/+2
Add vendor prefix for the Vivax brand by M SAN Grupa d.o.o. Source (in Croatian): https://www.vivax.com/hr/o-nama.aspx Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211002202905.509437-1-pavlica.nikola@gmail.com
2021-10-09dt-bindings: net: dsa: document felix family in dsa-tag-protocolVladimir Oltean1-0/+3
The Vitesse/Microsemi/Microchip family of switches supported by the Felix DSA driver is capable of selecting between the native tagging protocol and ocelot-8021q. This is necessary to enable flow control on the CPU port. Certain systems where these switches are integrated use the switch as a port multiplexer, so the termination throughput is paramount. Changing the tagging protocol at runtime is possible for these systems, but since it is known beforehand that one tagging protocol will provide strictly better performance than the other, just allow them to specify the preference in the device tree. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-09dt-bindings: net: dsa: fix typo in dsa-tag-protocol descriptionVladimir Oltean1-1/+1
There is a trivial typo when spelling "protocol", fix it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08Merge tag 'tags/bcm2835-dt-next-2021-10-06' into devicetree/nextFlorian Fainelli5-0/+13
Stefan Wahren adds devicetree support for the Raspbery Pi Compute Module 4 and its IO board Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-10-08dt-binding: usb: xilinx: Add clocking nodeShubhrajyoti Datta1-0/+6
Add a clocking node for xilinx udc. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/30c7d87ab46a0ea2da2dd04d824f162a2e3da4c8.1632805672.git.shubhrajyoti.datta@xilinx.com
2021-10-08Merge branch 'dt/linus' into dt/nextRob Herring12-14/+97
Merge fixes to avoid binding schema warnings. Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-08Merge series "regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema" from Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>:Mark Brown12-375/+401
Hi All, Changes since v2 ================ 1. Add Stephen's and Rob's tags. 2. Correct inb-supply description in patch 10/10. Changes since v2 ================ 1. Add Rob's tags. 2. Remove "regulator-name" from properties (all regulator dtschema). 3. Move "unevaluatedProperties" higher to make code easier to read (all regulator dtschema). 4. Add ref-type to op-mode property (patch 6: s5m8767 regulators). Changes since v1 ================ 1. Drop DTS patches - applied. 2. Fully remove bindings/regulator/samsung,s5m8767.txt . 3. Minor subject reformatting and few typos in text. Intro ===== This patchset converts all devicetree bindings of Samsung S2M and S5M PMIC devices from txt to dtschema. It includes also two fixes because later conversion depends on it (contextually). Merging/dependencies ==================== 1. Regulator related binding changes depend on first two commits (the fixes), because of context. 2. The mfd bindings depend on clock and regulator bindings. The fixes and bindings changes (patches 1-10) should go via the same tree. For example regulator or mfd tree. Another alternative is that regulator patches (1-2, 4-6) go via Mark who later gives MFD a stable branch/tag to pull. Then the clock and MFD bindings would go on top via MFD tree. Or any other setup you would like to have. Overview of devices =================== Essentially all Samsung S2M and S5M PMICs are very similar devices. They provide the same functionality: regulators, RTC, 2 or 3 clocks and main power management (e.g. power cut to SoC). The differences are mostly in registers layout and number of regulators. The drivers are built around one common part, mfd/sec-core.c, and share some drivers between devices: 1. MFD sec-core for all devices, 1. one clock driver for most of devices, 2. one RTC driver for all devices, 3. three regulator drivers. The regulator drivers were implementing slightly different features, therefore one regulator binding for all devices does not make much sense. However the clock device binding can be shared. The final dtschema bindings try to implement this - share only the clock bindings. Best regards, Krzysztof Krzysztof Kozlowski (10): regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property dt-bindings: clock: samsung,s2mps11: convert to dtschema regulator: dt-bindings: samsung,s2m: convert to dtschema regulator: dt-bindings: samsung,s2mpa01: convert to dtschema regulator: dt-bindings: samsung,s5m8767: convert to dtschema dt-bindings: mfd: samsung,s2mps11: convert to dtschema dt-bindings: mfd: samsung,s2mpa01: convert to dtschema dt-bindings: mfd: samsung,s5m8767: convert to dtschema dt-bindings: mfd: samsung,s5m8767: document buck and LDO supplies .../bindings/clock/samsung,s2mps11.txt | 49 --- .../bindings/clock/samsung,s2mps11.yaml | 45 +++ .../bindings/mfd/samsung,s2mpa01.yaml | 91 ++++++ .../bindings/mfd/samsung,s2mps11.yaml | 267 +++++++++++++++ .../bindings/mfd/samsung,s5m8767.yaml | 307 ++++++++++++++++++ .../bindings/mfd/samsung,sec-core.txt | 86 ----- .../bindings/regulator/samsung,s2mpa01.txt | 79 ----- .../bindings/regulator/samsung,s2mpa01.yaml | 62 ++++ .../bindings/regulator/samsung,s2mps11.txt | 102 ------ .../bindings/regulator/samsung,s2mps11.yaml | 44 +++ .../bindings/regulator/samsung,s2mps13.yaml | 44 +++ .../bindings/regulator/samsung,s2mps14.yaml | 44 +++ .../bindings/regulator/samsung,s2mps15.yaml | 44 +++ .../bindings/regulator/samsung,s2mpu02.yaml | 44 +++ .../bindings/regulator/samsung,s5m8767.txt | 145 --------- .../bindings/regulator/samsung,s5m8767.yaml | 74 +++++ MAINTAINERS | 9 +- drivers/regulator/s5m8767.c | 21 +- 18 files changed, 1080 insertions(+), 477 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.txt create mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml -- 2.30.2
2021-10-08Merge tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+1
Pull drm fixes from Dave Airlie: "I've returned from my tropical island retreat, even managed to bring one of my kids on a dive with some turtles. Thanks to Daniel for doing last week's work. Otherwise this is the weekly fixes pull, it's a bit bigger because the vc4 reverts in your tree caused some problems with fixes in the drm-misc tree so it got left out last week, so this week has the misc fixes rebased without the vc4 pieces. Otherwise it's i915, amdgpu with the usual fixes and a scattering over other drivers. I expect things should calm down a bit more next week. core: - Kconfig fix for fb_simple vs simpledrm. i915: - Fix RKL HDMI audio - Fix runtime pm imbalance on i915_gem_shrink() error path - Fix Type-C port access before hw/sw state sync - Fix VBT backlight struct version/size check - Fix VT-d async flip on SKL/BXT with plane stretch workaround amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes vc4 (there were some hdmi fixes but things got reverted, sort it out later): - compiler fix nouveau: - Cursor fix - Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support. - memory leak fixes rockchip: - crtc/clk fixup panel: - ili9341 Fix DT bindings indent - y030xx067a - yellow tint init seq fix gbefb: - Fix gbefb when built with COMPILE_TEST" * tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits) drm/amd/display: Fix detection of 4 lane for DPALT drm/amd/display: Limit display scaling to up to 4k for DCN 3.1 drm/amd/display: Skip override for preferred link settings during link training drm/nouveau/debugfs: fix file release memory leak drm/nouveau/kms/nv50-: fix file release memory leak drm/nouveau: avoid a use-after-free when BO init fails DRM: delete DRM IRQ legacy midlayer docs video: fbdev: gbefb: Only instantiate device when built for IP32 fbdev: simplefb: fix Kconfig dependencies drm/panel: abt-y030xx067a: yellow tint fix dt-bindings: panel: ili9341: correct indentation drm/nouveau/fifo/ga102: initialise chid on return from channel creation drm/rockchip: Update crtc fixup to account for fractional clk change drm/nouveau/ga102-: support ttm buffer moves via copy engine drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup drm/vc4: hdmi: Remove unused struct drm/kmb: Enable alpha blended second plane drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume drm/amdgpu: init iommu after amdkfd device init ...
2021-10-08regulator: dt-bindings: samsung,s5m8767: convert to dtschemaKrzysztof Kozlowski2-140/+74
Convert the regulators of Samsung S5M8767 PMIC to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Message-Id: <20211008113931.134847-3-krzysztof.kozlowski@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.