| Age | Commit message (Collapse) | Author | Files | Lines |
|
The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix c5a283802573 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 19e5cef058a0 ("dt-bindings: i2c: at91: document optional bus recovery properties")
|
|
In order to optimize serial communication (performance/throughput VS
latency), we may need to tweak DMA period number and size. This adds
DT properties to configure those values before initialising DMA.
The defaults will stay the same as before.
[update documentation and commit message, rebase to current master,
switch back to DT instead of sysfs]
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210430175038.103226-2-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the driver the interrupts are fetched by name. Therefore, add
interrupt names in the list of required properties
Fixes: 68989fe1c39d ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210528060657.29100-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RT5033 PMIC provides a simple fuel gauge via I2C.
Add a DT schema to describe how to set it up in the device tree.
Note that although RT5033 is a MFD with lots of functionality
(also charger, regulator, LEDs, ...) the fuel gauge has a separate
I2C bus and is not part of the MFD.
Cc: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 14577/77836 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add compatible string for AM64 SoC in device tree binding.
EPWM IP in AM64 does not support High resolution, so named epwm instead
of ehrpwm in compatible. However IP is till compatible with features
supported by driver with ti,am3352-ehrpwm compatible.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Convert the tiehrpwm binding to DT schema format using json-schema.
Along with this conversion the following changes are included:
- 'clock' and 'clock-names' properties are marked as required as
driver fails to probe without these properties
- Dropped ti,am33xx-ehrpwm as it is no longer applicable.
- 'power-domains' property is introduced and marked as optional.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add the VDO definition for USB PD rev 2.0 in the bindings and define a
new property snk-vdos-v1 containing legacy VDOs as the responses to the
port partner which only supports PD rev 2.0.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210601123151.3441914-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the cpu type of cpu2 and cpu3 since MT8173 used Cortex-a72.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This adds dt-binding documentation of pwrap for Mediatek MT8195
SoCs Platform.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210602112050.12338-2-james.lo@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add device tree binding documentation for AD7746 cdc in YAML format.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/2c2f4d486a94e0740e112bfac0d9306bdb7ea69c.1619841953.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the binding document for Richtek RT6245.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1622699844-19203-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the imx-audmux binding to DT schema format using json-schema
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210531064752.8809-1-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a fair amount of warnings when running 'make dtbs_check' with
amlogic,gx-sound-card.yaml.
Ex:
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long
The reason is that the sound-dai phandle provided has cells, and in such
case the schema should use 'phandle-array' instead of 'phandle'.
Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds device tree bindings for the ixp4xx crypto engine.
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Correct the order of the descriptions for the "interrupts" property to
match the order of the "interrupt-names" property.
Fixes: 68989fe1c39d9b32 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema")
Acked-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210527193952.1705127-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RK3308 has a USB GRF.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210601164800.7670-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications. Remove unneeded "#phy-cells" from parent node.
Also sort example.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210601164800.7670-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Changeset 9a81b8cbc245 ("dt-bindings: reset: Convert ti,sci-reset to json schema")
renamed: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
to: Documentation/devicetree/bindings/reset/ti,sci-reset.yaml.
Update the cross-references accordingly.
Fixes: 9a81b8cbc245 ("dt-bindings: reset: Convert ti,sci-reset to json schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e9b505d900d898c0d030deb168ab291206c203ee.1622648507.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Changeset a7dbfa6f3877 ("dt-bindings: clock: Convert ti,sci-clk to json schema")
renamed: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
to: Documentation/devicetree/bindings/clock/ti,sci-clk.yaml.
Update the cross-references accordingly.
Fixes: a7dbfa6f3877 ("dt-bindings: clock: Convert ti,sci-clk to json schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0fae687366c09dfb510425b3c88316a727b27d6d.1622648507.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Changeset fda55c7256fe ("dt-bindings: soc: ti: Convert ti,sci-pm-domain to json schema")
renamed: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
to: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml.
Update the cross-references accordingly.
Fixes: fda55c7256fe ("dt-bindings: soc: ti: Convert ti,sci-pm-domain to json schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c03020ff281054c3bd2527c510659e05fec6f181.1622648507.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Changeset ce49e4282200 ("dt-bindings: power: supply: cpcap-charger: Convert to DT schema format")
renamed: Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
to: Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml.
Update its cross-reference accordingly.
Fixes: ce49e4282200 ("dt-bindings: power: supply: cpcap-charger: Convert to DT schema format")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e9ce216362b7b9dcf84d707a3854247123440bf7.1622648507.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Changeset 3c5be0454972 ("dt-bindings: power: supply: cpcap-battery: Convert to DT schema format")
renamed: Documentation/devicetree/bindings/power/supply/cpcap-battery.txt
to: Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml.
Update its cross-reference accordingly.
Fixes: 3c5be0454972 ("dt-bindings: power: supply: cpcap-battery: Convert to DT schema format")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1d0c8d50db22d9e5540a42be874fcd39fb7fc2a7.1622648507.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
"amlogic,meson-gxbb-scp-shmem" is already in the Generic on-chip SRAM
binding though "amlogic,meson-gxbb-scpi" is missing which is now added.
Also remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-5-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit a90b15e0ad72 ("Documentation: bindings: decouple juno specific
details from generic binding") moved the juno specific bindings into
separate file. Though there was no need for juno specific binding, it
has been used unfortunately for whatever stupid reason I added it for.
Let us move the same to the generic sram.yaml schema and remove the
old text format binding.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-4-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Move the SRAM and shared memory binding for SCMI into the existing
Generic on-chip SRAM. We just need to update the compatible list and
there-by remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-3-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Move the SRAM and shared memory binding for SCPI into the existing
Generic on-chip SRAM. We just need to update the compatible list and
there-by remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-2-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the current OMAP Mailbox binding from text format to YAML
format/DT schema, and delete the legacy text binding file.
The new YAML binding conversion is an updated version compared to
the original. The descriptions for certain properties have been
improved to provide more clarity. Constraints are added to the
properties 'ti,mbox-num-users', 'ti,mbox-num-fifos' and 'interrupts'.
The 'ti,hwmods' is a legacy property and is retained only to reflect
the existing usage on some older OMAP2 and OMAP3 platforms.
All the existing examples have also been updated to reflect the
latest dts nodes (ti,hwmods removed from OMAP4 and AM33xx examples,
and interrupts value updated for AM65x SoCs).
Signed-off-by: Suman Anna <s-anna@ti.com>
[robh: Update ref in ti,omap-remoteproc.yaml]
Link: https://lore.kernel.org/r/20210520234348.4479-1-s-anna@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add vendor prefix for StarFive Technology Co. Ltd [1]. StarFive was
formed in 2018 and has now produced their first SoC, the JH7100, which
contains 64-bit RISC-V cores [2]. It used in the BeagleV Starlight [3].
[1] https://starfivetech.com/site/company
[2] https://github.com/starfive-tech/beaglev_doc
[3] https://github.com/beagleboard/beaglev-starlight
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210531070415.269667-1-drew@beagleboard.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The check for the board compatible should be limited only to the root
node. Any other nodes with such compatible are not part of this schema
and should not match.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Link: https://lore.kernel.org/r/20210526162750.135139-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the common MDIO mux bindings to DT schema.
Drop the example from mdio-mux.yaml as mdio-mux-gpio.yaml has the same one.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210526181411.2888516-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Straight conversion of the txt file using the mux-consumer.yaml
binding now that is available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Peter Rosin <peda@axentia.se>
[robh: Drop quotes and $ref for mux-controls]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210522112908.1611389-3-jic23@kernel.org
|
|
This helps validating DTS files.
Introduced changes:
1. Swapped #address-cells and #size-cells values
2. Renamed node: s/enet-gphy/ethernet-phy@/
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add DT binding document for Richtek RT6160 voltage regulator.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1622611906-2403-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add optional vddd-supply property to allow regulator control.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210528105101.508254-3-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document TFA9897 bindings.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210528105101.508254-1-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the compatible string for M3-W+ (r8a77961) to the list of supported
SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the compatible string for M3-W+ (r8a77961) to the list of supported
SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add documentation for the devicetree bindings of the RDA5807 FM radio
I2C chip from Unisoc.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document support for the VIN module in the Renesas V3U (r8a779a0) SoC.
The V3U is different from other SoCs as it have 32 instead of 8 (most of
Gen3) or 16 (V3H) VIN instances. The VIN instances are also connected to
a new IP the R-Car ISP Channel Selector.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add bindings for Renesas R-Car ISP Channel Selector IP. The ISP is
responsible for filtering the MIPI CSI-2 bus and directing the different
CSI-2 virtual channels to different R-Car VIN instances (DMA engines)
for capture.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
address-cells and size-cells can't be declared as "required" properties
as they are not needed if subnodes don't have a "reg" entry.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add support for pm8350c, pmk8350, pm7325 and pmr735a PMICS.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This driver was merged in the early days of device tree
on Arm in 2012 and somehow we failed to provide bindings
for it. Fix it up with some YAML bindings.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Adds DT binding document for Richtek RT4831.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Adds DT binding document for Richtek RT4831 backlight.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This is for ChromeOS tablets which have a 'cros_cbas' switch device
in the "Whiskers" base board. This device can be instantiated only by
device tree on ARM platforms. ChromeOS EC doesn't provide a way to
probe the device.
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Immutable branch between MFD and ASoC due for the v5.14 merge window
Immutable branch between MFD, GPIO and Regulator due for the v5.14 merge window
Immutable branch between MFD, Regulator and RTC due for the v5.14 merge window
|
|
Linux 5.13-rc4
* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...
|