| Age | Commit message (Collapse) | Author | Files | Lines |
|
The CLKSCREW attack [0] exposed security vulnerabilities in energy management
implementations where untrusted software had direct access to clock and
voltage hardware controls. In this attack, the malicious software was able to
place the platform into unsafe overclocked or undervolted configurations. Such
configurations then enabled the injection of predictable faults to reveal
secrets.
Many Arm-based systems used to or still use voltage regulator and clock
frameworks in the kernel. These frameworks allow callers to independently
manipulate frequency and voltage settings. Such implementations can render
systems susceptible to this form of attack.
Attacks such as CLKSCREW are now being mitigated by not having direct and
independent control of clock and voltage in the kernel and moving that
control to a trusted entity, such as the SCP firmware or secure world
firmware/software which are to perform sanity checking on the requested
performance levels, thereby preventing any attempted malicious programming.
With the advent of such an abstraction, there is a need to replace the
generic clock and regulator bindings used by such devices with a generic
performance domains bindings.
[0] https://www.usenix.org/conference/usenixsecurity17/technical-sessions/presentation/tang
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add compatible string for PM7325 pmic GPIO support to the
Qualcomm PMIC GPIO binding.
Signed-off-by: satya priya <skakit@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1620817988-18809-3-git-send-email-skakit@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add device tree binding to support MT7530 interrupt controller.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update Sergei's email address, as per commit 534a8bf0ccdd7b3f
("MAINTAINERS: switch to my private email for Renesas Ethernet
drivers").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some systems, S3FWRN5 depends on having an external clock enabled
to function correctly. Allow declaring that clock in the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210512205926.780-1-zajec5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add devicetree binding documentation for the Hantro G1/G2 VDEC on
the Microchip SAMAS5D4 SoC.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The PMI8994 has 4 multi-purpose-pins, add a compatible for this hardware
block to the MPP driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210429003751.224232-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Important: this change converts the binding as it is. It includes
dependency on undocumented CRU that must be refactored. CRU must get
documented and offset property has to be reworked.
Above can (and will be) be handled once every CRU MFD subdevice gets
documented properly (including the pinmux).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210421182041.22636-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Linux 5.13-rc2
|
|
The I2S peripheral of the Allwinner V3 SoC is compatible with the one
found in the Allwinner H3 SoC.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210514134405.2097464-7-t.schramm@manjaro.org
|
|
The analog codec frontend of the Allwinner V3 is compatible with the
analog codec frontend used on the Allwinner H3.
This patch adds a compatible string for the analog codec frontend on the
Allwinner V3 SoC.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210514134405.2097464-5-t.schramm@manjaro.org
|
|
The Allwinner V3s pwm peripheral is compatible with the pwm peripheral
inside the Allwinner A20.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210513203527.2072090-2-t.schramm@manjaro.org
|
|
Add the bindings for NanoPi R1S H5 board.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210516163523.9484-3-amadeus@jmu.edu.cn
|
|
ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip
which is connected to and operated by the ChromeOS Embedded Controller
(See google,cros-ec.yaml). It is accessed using I2C tunneling through
the EC and therefore its node should be a child of an EC I2C tunnel node
(See google,cros-ec-i2c-tunnel.yaml).
ChromOS EC ANX7688 is found on Acer Chromebook R13 (elm)
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518141927.24795-2-dafna.hirschfeld@collabora.com
|
|
The recent conversion of the common MTD properties to YAML now mandates
a particular node name for SPI flash devices.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210517153946.9502-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210512160253.15000-1-zajec5@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
property-units.txt is not maintained anymore. New suffixes are now
supported that have not been added here.
To avoid people incorrectly think a given suffix is not in the list remove
the file entirely and point to the authoritative place where the
recommended suffixes are maintained.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20210512152311.7399-1-luca@lucaceresoli.net
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add compatible string for RK3568 gmac, and constrain it to
be compatible with Synopsys dwmac 4.20a.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Users of common properties shouldn't have a type definition as the
common schemas already have one. A few new ones slipped in and
*-names was missed in the last clean-up pass. Drop all the unnecessary
type references in the tree.
A meta-schema update to catch these is pending.
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: Odelu Kukatla <okukatla@codeaurora.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: linux-clk@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210510204524.617390-1-robh@kernel.org
|
|
Convert the renesas,drif binding schema to use the graph schema. The
binding referred to video-interfaces.txt, but it doesn't actually use any
properties from it as 'sync-active' is a custom property. As 'sync-active'
is custom, it needs a type definition.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20210510203514.603471-1-robh@kernel.org
|
|
The KX023-1025 accelerometer uses similar register bits as kxcjk1023,
so it can make use of the same driver. Document the new kionix,kx023-1025
compatible that is also supported by the kxcjk-1013 driver now.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The current-sense-shunt is an IIO provider thus can be referenced by IIO
consumers (via "io-channels" property in consumer device node).
Such provider is required to describe number of cells used in phandle
lookup with "io-channel-cells" property. This also fixes dtbs_check
warnings like:
arch/arm/boot/dts/s5pv210-fascinate4g.dt.yaml: current-sense-shunt:
'#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: ce66e52b6c16 ("dt-bindings:iio:afe:current-sense-shunt: txt to yaml conversion.")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF
accelerometer sensor.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Straight forward conversion. Only fiddly bit is the XOR of
spi-cpol and spi-cpha.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Link: https://lore.kernel.org/r/20201031184854.745828-40-jic23@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210424173015.534941-1-jic23@kernel.org
|
|
Enumerate LSM9DS0 (accelerometer and magnetometer parts) via
'st,lsm9ds0-imu' compatible string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210414195454.84183-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a binding documentation for the TI TSC2046 touchscreen controllers
ADC functionality.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210428073208.19570-3-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Settling time and over sampling is a typical challenge for different IIO ADC
devices. So, introduce channel specific settling-time-us and oversampling-ratio
properties to cover this use case.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210428073208.19570-2-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
sps30 has gained support for serial communication so add example to the
binding file. While at it remove reg property from list of required
properties because it's no-op in case of serial communication.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
initial DT bindings for Murata SCA3300 Accelerometer.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210426081041.59807-2-tomas.melin@vaisala.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This binding covers class of simple SPI ADCs which only provide
data output - they don't have MOSI pin.
The only real variation between them is over how many supplies they
use and which one is used for the reference.
Michael listed as maintainer for this one as it is his driver and
falls under the catch all MAINTAINERS entry for ADI devices.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210425163154.73209-3-jic23@kernel.org
|
|
Fairly simple conversion with the exception of the XOR between
spi-cpha and spi-cpol.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/20201031134110.724233-17-jic23@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401140956.224084-3-jic23@kernel.org
|
|
The device has a tsens-busy pin, but it's both fiddly and currently
ignored by the Linux driver. Given it's not clear whether the binding
should be an interrupt, or a GPIO I have left that out for now.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-7-jic23@kernel.org
|
|
Two simple devices. The stk8ba50 datasheet could be found via
google, but I only have the driver for the 8312.
Given they both seem to be 3 axis devices with a single interrupt
line, add them to trivial-devices.yaml
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-6-jic23@kernel.org
|
|
Simple devices with I2C interface and single interrupt line so
entries in trivial devices are sufficient.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-5-jic23@kernel.org
|
|
Binding documentation for this driver was missing.
Note that the binding and some in tree dts files specifiy interrupts
etc but the driver is fairly simple and does not yet make use of them.
Listed both Joachim and myself as maintainers for this binding on basis
it's Joachim's driver but I don't want to volunteer Joachim too
strongly to look after this doc.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joachim Eastwood <manabian@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-4-jic23@kernel.org
|
|
Linux driver currently relies on the driver.name to match to the
compatible, but that doesn't mean it isn't a good idea to document it.
Only real complexity is the 3 separate power supplies.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-3-jic23@kernel.org
|
|
These two devices have different internal characteristics, but their
external connectivity and as a result device tree descriptions are
identical.
Note that neither driver in Linux currently has an of_match_table
but instead rely on matching via name alone.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-2-jic23@kernel.org
|
|
Device tree binding for AMS/TAOS tsl2591 ambient light sensor.
This driver supports configuration via device tree and sysfs.
Supported channels for raw infrared light intensity,
raw combined light intensity and illuminance in lux.
The driver additionally supports iio events on lower and
upper thresholds.
This is a very-high sensitivity light-to-digital converter that
transforms light intensity into a digital signal.
Signed-off-by: Joe Sandom <joe.g.sandom@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210421221330.17007-2-joe.g.sandom@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adjusts the ST Sensor bindings with the more fine-grained
syntax checks that were proposed late in the last kernel cycle
and colliding with parallel work.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210412122331.1631643-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree binding document for TMP117, a digital temperature sensor.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210407182147.77221-2-puranjay12@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document new way of declare mapping of internal PHY to port.
The new implementation directly declare the PHY connected to the port
by adding a node in the switch node. The driver detect this and register
an internal mdiobus using the mapping defined in the mdio node.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for qca8327 in the compatible list.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Rockchip RK3308 has a gmac that is not fully compatible with any of the
other Rockchip gmacs.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define a compatible string for the Mali Bifrost GPU found in
Mediatek's MT8183 SoCs.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421132841.v13.1.Ie74d3355761aab202d4825ac6f66d990bba0130e@changeid
|
|
These devices differ by the size of their storage, which is why they
have different compatible strings.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Link: https://lore.kernel.org/r/20210511210727.24895-4-linkmauve@linkmauve.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document qcom,pcie-ipq6018. This is similar to the ipq8074 with a few
different clock sources, and one additional reset.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/fd732635f4ad64263e361ce98af2944bfbd513ef.1620203062.git.baruch@tkos.co.il
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add ipq6018 qmp phy device for the single PCIe serdes lane on IPQ60xx
SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/be83d8580942ab9d141dffff4e4f33f34a4c9ed9.1620203062.git.baruch@tkos.co.il
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
MT7621 SoC clock driver has already mainlined in
'commit 48df7a26f470 ("clk: ralink: add clock driver for mt7621 SoC")'
Hence update schema with the add of the entries related to
clock. Since until now things were not properly being done
we mark also 'clock' as required in the binding since this
will be now the only way to properly retrieve frequency to be
able to make a correct configuration of the PCIe phy registers.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210508070930.5290-3-sergio.paracuellos@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the Renesas R-Car Gen3 PCIe PHY Device Tree binding
documentation to json-schema.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/0301c3a7dae9afde115b6437a11c23ab85cb8b75.1620648490.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|