| Age | Commit message (Collapse) | Author | Files | Lines |
|
Qualcomm driver updates for 5.12
The socinfo driver gains support for dumping information about the platform's
PMICs, as well as new definitions for a number of platforms. The LLCC driver
gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains
support for MSM8994 power domains. In addition to this it contains a few minor
fixes in the ocmem, rpmh and llcc drivers.
* tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ocmem: don't return NULL in of_get_ocmem
soc: qcom: socinfo: Remove unwanted le32_to_cpu()
soc: qcom: aoss: Add SM8350 compatible
drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains
soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()
soc: qcom: socinfo: Fix off-by-one array index bounds check
soc: qcom: socinfo: Add MDM9607 IDs
soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998
soc: qcom: socinfo: Add SoC IDs for 630 family
soc: qcom: socinfo: Open read access to all for debugfs
soc: qcom: socinfo: add info from PMIC models array
soc: qcom: socinfo: add several PMIC IDs
soc: qcom: socinfo: add qrb5165 SoC ID
soc: qcom: rpmh: Remove serialization of TCS commands
soc: qcom: smem: use %*ph to print small buffer
dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
drivers: qcom: rpmh-rsc: Do not read back the register write on trigger
soc: qcom: llcc-qcom: Add support for SM8250 SoC
soc: qcom: llcc-qcom: Extract major hardware version
dt-bindings: msm: Add LLCC for SM8250
Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
To improve human readability and enable automatic validation, the tuples
in "pinctrl-*" properties should be grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210204125937.1646305-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
To improve human readability and enable automatic validation, the tuples
in "cpus" properties in device nodes for Advanced Power Management Units
for AP-System Core (APMU) should be grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210204125542.1645925-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
New boards: Radxa Rock Pi E, NanoPi M4B
More fixed indices for mmc nodes; removal of obsolete amba bus nodes;
nand-flash-controller nodes for px30 and rk3308; rk3399 pcie ranges fix;
board-level fixes for Helios64, NanoPi and Rock960; more sound support
for rock64 and rockpro64 and cleanups to make dt-bindings happier.
* tag 'v5.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
arm64: dts: rockchip: more user friendly name of sound nodes
arm64: dts: rockchip: rename pinctrl nodename to gmac2io for nanopi-r2s board
arm64: dts: rockchip: assign a fixed index to mmc devices on rk3368 boards
arm64: dts: rockchip: assign a fixed index to mmc devices on rk3308 boards
arm64: dts: rockchip: assign a fixed index to mmc devices on px30 boards
arm64: dts: rockchip: cleanup cpu_thermal node of rk3399-rock960.dts
arm64: dts: rockchip: Remove bogus "amba" bus nodes
arm64: dts: rockchip: Light "sys" LED on NanoPi R2S
arm64: dts: rockchip: fix ranges property format for rk3399 pcie node
arm64: dts: rockchip: Rely on SoC external pull up on pmic-int-l on Helios64
arm64: dts: rockchip: Add NanoPi M4B board
arm64: dts: rockchip: Move ep-gpios property to nanopc-t4 from nanopi4
arm64: dts: rockchip: Add NFC node for PX30 SoC
arm64: dts: rockchip: Add NFC node for RK3308 SoC
arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E
dt-bindings: arm: rockchip: Add Radxa ROCK Pi E
arm64: dts: rockchip: rk3328: Add clock_in_out property to gmac2phy node
arm64: dts: rockchip: rename thermal subnodes for rk3399
arm64: dts: rockchip: rename thermal subnodes for rk3368
arm64: dts: rockchip: add SPDIF node for rk3399-rockpro64
...
Link: https://lore.kernel.org/r/12699743.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the SPI-NOR binding to DT schema format. Like other memory chips,
the compatible strings are a mess with vendor prefixes not being used
consistently and some compatibles not documented. The resulting schema
passes on 'compatible' checks for most in tree users with the exception
of some oddballs.
I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear
to be used anywhere.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202175340.3902494-1-robh@kernel.org
|
|
sort -C is like sort -c >/dev/null but less portable. It fails on
busybox sort (i.e alpine linux).
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Fixes: ea5b8b5eb004 ("dt-bindings: Add a minimum version check for dtschema")
Link: https://lore.kernel.org/r/20210201165829.58656-1-iskren.chernev@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The original fixed-link.txt allowed a pause property for fixed link.
This has been missed in the conversion to yaml format.
Fixes: 9d3de3c58347 ("dt-bindings: net: Add YAML schemas for the generic Ethernet options")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1l6W2G-0002Ga-0O@rmk-PC.armlinux.org.uk
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
BCM4908 is a family of SoCs with integrated Ethernet controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document the compatible value for the ROHM Semiconductor BR24G01 I2C bus
EEPROM.
While at it, sort the entries alphabetically.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
The current PRUSS Interrupt Controller binding doesn't exactly specify
the convention for the node name. These interrupt-controllers will always
have a unit address. Update the binding with the '$nodename' using the
expected generic name, this shall ensure the interrupt-controller.yaml
is automatically applied to this binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210126163251.29468-1-s-anna@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Update the existing OMAP HwSpinlock binding to include the info for
AM64x SoCs. There are some minor IP integration differences between
the AM64x SoCs and the previous AM65x and J721E SoC families.
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210209172240.2305-2-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
i.MX DT bindings update for 5.12:
- Various board compatible additions to fsl.yaml.
- Add vendor prefix for Plymovent and Kverneland Group.
- Update simple panel bindings to include compatible for EDT and Kyocera
panels.
* tag 'imx-bindings-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: imx: add imx8mm nitrogen support
dt-bindings: arm: fsl: Add the librem 5 Evergreen revision
dt-bindings: arm: fsl: add Kverneland TGO board
dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
dt-bindings: arm: fsl: add Kontron sl28 variant 1
bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
dt-bindings: arm: fsl: add Protonic PRTI6G board
dt-bindings: arm: fsl: add Protonic MVT board
dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
dt-bindings: arm: fsl: add Plymovent BAS board
dt-bindings: arm: fsl: add Plymovent M2M board
dt-bindings: vendor-prefixes: Add an entry for Plymovent
dt-bindings: display: simple: Add Kyocera tcg070wvlq panel
dt-bindings: display: simple: add EDT compatibles already supported by the driver
dt-bindings: display: simple: fix alphabetical order for EDT compatibles
dt-bindings: arm: fsl: Add beacon,imx8mn-beacon-kit
Link: https://lore.kernel.org/r/20210204120150.26186-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm ARM dts updates for 5.12
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
* tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits)
ARM: dts: qcom: msm8974-klte: Mark essential regulators
ARM: dts: qcom: msm8974-klte: add support for display
ARM: dts: qcom: msm8974-klte: add support for GPU
ARM: dts: qcom: msm8974: add gpu support
ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
ARM: dts: qcom: replace status value "ok" by "okay"
ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
ARM: dts: qcom: add Alfa Network AP120C-AC
ARM: dts: qcom: add 8devices Jalapeno
ARM: dts: qcom: ipq4019: add more labels
ARM: dts: qcom: ipq4019: add USB devicetree nodes
ARM: dts: qcom: add prng definition to ipq806x
ARM: dts: qcom: sdx55: Add pshold support
ARM: dts: qcom: sdx55: Add Watchdog support
dt-bindings: watchdog: Add binding for Qcom SDX55
ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
ARM: dts: qcom: sdx55: Add USB3 and PHY support
dt-bindings: usb: qcom,dwc3: Add binding for SDX55
ARM: dts: qcom: msm8974-klte: Fix shdc numbering
...
Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm ARM64 DT updates for 5.12
This introduces initial support for the new SM8350 platform, aka
Snapdragon 888, and the MTP device for this.
It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC
support to the SM8250 platform and RB5 in particular, as well as improve
the definition of CPUs, thermal zones and fixes a few smaller issues.
It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone
2 Laser and BQ Aquaris X5, based on the MSM8916 platform.
It contains an overhaul of the existing MSM8992 and MSM8994 platform
files and introduces RPM power domains and SMP2P nodes. It adds
touchscreen, additional regulators, microSD card support and adds the
Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common
parts of the Lumia 950 and 950XL and extend these with support for
sensors, NFC, bluetooth, audio, microSD and Type-C mux pins.
It introduces support for the OnePlus6 and 6t, adds the missing higher
frequences for the SDM850 laptops, adds CPU cluster idle support on
SM8150 and a few tweaks to the SC7180 platform.
* tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (100 commits)
arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels
arm64: dts: qcom: msm8996: Add missing device_type under pcie[01]
arm64: dts: qcom: sc7180: Add support for gpu fuse
arm64: dts: qcom: msm8998: Disable some components by default
arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores
arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming
arm64: dts: qcom: msm8998: Add DMA to I2C hosts
arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi
arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors
arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec
arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5
arm64: dts: qcom: msm8994-octagon: Add NXP NFC node
arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes
arm64: dts: qcom: msm8994-octagon: Configure PON keys
arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA
arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC
arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins
arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth
arm64: dts: qcom: msm8994-octagon: Configure regulators
...
Link: https://lore.kernel.org/r/20210204052043.388621-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm64: dts: amlogic updates for v5.12
- new board: Hardkernel ODROID-HC4 (SoC: SM1)
- new board: Beelink GS-King-X (SoC: S922X)
- shorten shorten audio card names for alsa compatibility
- misc cleanups & fixes
* tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add initial device-tree for ODROID-HC4
dt-bindings: arm: amlogic: add ODROID-HC4 bindings
arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
arm64: dts: meson: sort Amlogic dtb Makefile
dt-bindings: arm: amlogic: sort SM1 bindings
arm64: dts: meson: fix broken wifi node for Khadas VIM3L
arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi
ARM: dts: meson: add the AO ARC remote processor
dt-bindings: Amlogic: add the documentation for the SECBUS2 registers
dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM
arm64: dts: meson: shorten audio card names for alsa compatibility
arm64: dts: meson: add initial Beelink GS-King-X device-tree
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
arm64: dts: meson: Fix schema warnings for pwm-leds
arm64: dts: meson: vim3: whitespace fixups
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: amlogic: meson-g12: Set FL-adj property value
Link: https://lore.kernel.org/soc/7heehq7ag3.fsf@baylibre.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm64: dts: ZynqMP DT changes for v5.12
- Wire clock chips present on boards
- Enable reset, qspi, nand, watchdog and DP IPs
- Enable phy driver for sata and DP
- Add iommu description
- Add support for zcu104 revC+ boards
- Various small changes
- Add missing labels
- Fix typos in documentation
- Add missing boards
* tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx:
arm64: dts: zynqmp: Wire up the DisplayPort subsystem
arm64: dts: zynqmp: Add DisplayPort subsystem
arm64: dts: zynqmp: Add DPDMA node
dt-bindings: arm: Fix typo in zcu111 board
arm64: dts: zynqmp: Add description for zcu104 revC
arm64: dts: zynqmp: Add missing iommu IDs
arm64: dts: zynqmp: Add missing lpd watchdog node
arm64: dts: zynqmp: Wire zynqmp qspi controller
arm64: dts: zynqmp: Wire arasan nand controller
arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
arm64: dts: zynqmp: Add label for zynqmp_ipi
arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
arm64: dts: zynqmp: Enable reset controller driver
arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
arm64: dts: zynqmp: Add address-cells property to interrupt controllers
Link: https://lore.kernel.org/r/b1a6f89e-f6b4-757b-daf0-d2f1844b833d@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The CEC and hotplug interrupts were missing when that binding was
introduced, let's add them in now that we've figured out how it works.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-14-maxime@cerno.tech
(cherry picked from commit e7cbc68a28e14c51e354f94831bd03cdf7ec6cea)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
"make dtbs_check" complains that the number of interconnect-cells
for some RPMh platforms is not "const: 1" (as defined in the schema).
That's because the interconnect-cells now can be 1 or 2, depending
on what is supported by the specific interconnect provider. Let's
reflect this in the schema.
Fixes: 9a34e7ad2e12 ("dt-bindings: interconnect: Document the support of optional path tag")
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20210121145320.2383-1-georgi.djakov@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Adds L1TCM memory region. The reg-name is "l1tcm".
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210127083136.3745652-4-tzungbi@google.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add bindings of VDO properties of USB PD SVDM so that they can be
used in device tree.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-7-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Vinod writes:
phy-for-5.12
- Updates:
- Conversion to YAML binding for:
- mtk-xsphy
- mtk-tphy
- mtk-ufs
- HDMI PHY
- MIPI DSI PHY
- brcmstb-usb-phy
- Support for BCM4908 usb phy
- Support for Qualcomm SDX55 USB and QMP phy
- Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy
- Support for Qualcomm SDM660 USB and UFS phy
- Support for Qualcomm SC8180X USB and UFS phy
- Support for Qualcomm IPQ6018 USB phy
- Stm32 phy updates
* tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits)
phy: cpcap-usb: Simplify bool conversion
phy: qcom-qmp: make a const array static, makes object smaller
phy: zynqmp: Simplify code by using dev_err_probe()
phy: qcom-qmp: Add support for SM8350 UFS phy
phy: qcom-qmp: Add UFS V5 registers found in SM8350
dt-bindings: phy: qcom,qmp: Add SM8350 UFS PHY bindings
phy: qualcomm: usb28nm: Add MDM9607 init sequence
dt-bindings: phy: qcom,qusb2: document ipq6018 compatible
phy: qcom-qusb2: add QUSB2 support for IPQ6018
phy: qcom-qmp: Add SC8180X USB phy
phy: qcom-qmp: Add SC8180X UFS phy
dt-bindings: phy: qcom,qmp: Add SC8180X USB phy
dt-bindings: phy: qcom,qmp: Add SC8180X UFS to the QMP binding
dt-bindings: phy: qcom-qusb2: Document SDM660 compatible
phy: qcom-qusb2: Add configuration for SDM660
phy: qcom-qusb2: Allow specifying default clock scheme
dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM8250 and SM8350 bindings
phy: qcom-qmp: Add SM8350 USB QMP PHYs
dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings
phy: qcom-qmp: Add support for SDX55 QMP PHY
...
|
|
My nxp account will expire soon, so switch to my personal e-mail
address.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210130144558.133534-1-festevam@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120131026.1721788-5-arnd@kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120131026.1721788-4-arnd@kernel.org
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120131026.1721788-3-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120131026.1721788-2-arnd@kernel.org
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The axi-clkgen driver now supports ZynqMP (UltraScale) as well, however the
driver needs to use different PFD & VCO limits.
For ZynqMP, these needs to be selected by using the
'adi,zynqmp-axi-clkgen-2.00.a' string.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210201151245.21845-4-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device tree bindings for global clock controller on SM8350 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127070811.152690-5-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add devicetree binding for the global clock controller found in the
Qualcomm SC8180x platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210126043155.1847823-1-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add Qualcomm SC8180x to the list of compatibles for the RPMHCC binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210120223741.1610344-1-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add devicetree YAML binding for Cortex A7 PLL clock in Qualcomm
platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118041156.50016-4-manivannan.sadhasivam@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the board bindings for the ODROID-HC4 device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-5-christianshewitt@gmail.com
|
|
Add the ingenic,jz4760b-codec and ingenic,jz4760-codec compatible
strings.
In the process, convert the previous compatible strings to use an enum
instead.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add binding document for the ENE KB930 Embedded Controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode
was added to report RPM's from a fan tach input.
Add this mode to the dt-bindings for the Gateworks System Controller.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
According to the definition in leds-pwm.yaml, the node name of each LED
must match the regular expression "^led(-[0-9a-f]+)?$". "led" or "led-"
followed by a decimal or hexadecimal ID number.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add device tree binding information for MT6315 regulator driver.
Example bindings for MT6315 are added.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1612678457-11548-2-git-send-email-hsin-hsiung.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add intel,keembay-hdmi-i2s compatible string to support the
HDMI interface.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-4-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add devicetree binding for watchdog present in Qcom SDX55 platform.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210118051005.55958-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210120162745.61268-6-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/r/20210120162745.61268-5-arnd@kernel.org
[groeck: Removed devicetree bindings]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210120162745.61268-4-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120162745.61268-2-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
update mtk-wdt document for MT8192 platform
Signed-off-by: Crystal Guo <crystal.guo@mediatek.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201014131936.20584-3-crystal.guo@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog driver for MT2712 and MT8183 relies on DT data, so
the fallback compatible MT6589 won't work.
Signed-off-by: Crystal Guo <crystal.guo@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201014131936.20584-2-crystal.guo@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip SoC dtsi files only
the fallback string "snps,dw-wdt" is used, so add the following
compatible strings:
"rockchip,px30-wdt", "snps,dw-wdt"
"rockchip,rk3228-wdt", "snps,dw-wdt"
"rockchip,rk3308-wdt", "snps,dw-wdt"
"rockchip,rk3328-wdt", "snps,dw-wdt"
"rockchip,rk3399-wdt", "snps,dw-wdt"
"rockchip,rv1108-wdt", "snps,dw-wdt"
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20201218120534.13788-1-jbx6244@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use enums to group all compatible devices together on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210118020848.11721-18-andre.przywara@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201218173731.12839-2-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add Device Tree binding document for Watchdog IP in the Intel Keem Bay SoC.
Acked-by: Mark Gross <mgross@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/8c4dad4fb8ba644607aa9379d5ec70d8707d7e75.1608141131.git.vijayakannan.ayyathurai@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|