| Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull input fixes from Dmitry Torokhov:
"Nothing terribly interesting, just a few fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - sync supported devices with fork on GitHub
Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table
Input: goodix - add support for Goodix GT9286 chip
dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC
dt-bindings: input: adc-keys: clarify description
Input: ili210x - implement pressure reporting for ILI251x
Input: i8042 - unbreak Pegatron C15B
Input: st1232 - wait until device is ready before reading resolution
Input: st1232 - do not read more bytes than needed
Input: st1232 - fix off-by-one error in resolution handling
|
|
According to the USB 3.2 spec, a SuperSpeed Plus device can operate at
gen2x2, gen2x1, or gen1x2. If the USB controller device supports
multiple lanes at different transfer rates, the user can specify the HW
capability via these new speed strings:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
If the argument is simply "super-speed-plus", USB controllers should
default to their maximum transfer rate and number of lanes.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cc7cc15f87e209c9963f19129f51398cdc374358.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the compatible strings for the UFS PHY found on SM8350 SoC.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210204165805.62235-2-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
- Add dt-bindings documentation for Sony imx334 sensor driver.
- Add MAINTAINERS entry for Sony imx334 binding documentation.
Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com>
Reviewed-by: Gjorgji Rosikopulos <gjorgjix.rosikopulos@intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Paul J. Murphy <paul.j.murphy@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add bindings for the IMX258 camera sensor. The bindings, just like the
driver, are quite limited, e.g. do not support regulator supplies.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the 'maxim,reverse-channel-microvolt' vendor property in the
bindings document of the max9286 driver.
The newly introduced property allows to specify the initial
configuration of the GMSL reverse control channel to accommodate
remote serializers pre-programmed with the high threshold power
supply noise immunity enabled.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Recently ov5647.yaml got renamed as ovti,ov5647.yaml. As part of the
video-interfaces DT schema conversion that was unintentionally brought
back. Fix this by applying the schema changes to the new file and removing
the old one.
Fixes: 066a94e28a23 ("media: dt-bindings: media: Use graph and video-interfaces schemas")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The NXP pcf2127 supports reset-source.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210202000634.3438575-1-alexandre.belloni@bootlin.com
|
|
Silvaco provide a dual-role I3C master.
Description is rather simple: it needs a register mapping, three
clocks and an interrupt.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210121101808.14654-5-miquel.raynal@bootlin.com
|
|
Silvaco, Inc. is an EDA provider of software tools used for process
and device development and for analog/mixed-signal, power IC and
memory design [1].
[1] https://www.silvaco.com/company/profile/profile.html
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210121101808.14654-4-miquel.raynal@bootlin.com
|
|
Update a little bit the content to match the bus binding, including:
- the node title should have been named after the description done
in the historical i3c.txt file, ie: i3c-master@<address>
- child nodes should be accepted even though the drivers do not currently
support it
- #address-cells and #size-cells are also mandatory and have specific
values
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210121101808.14654-3-miquel.raynal@bootlin.com
|
|
Attempting a conversion of the i3c.txt file to yaml schema with
minimal content changes.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210121101808.14654-2-miquel.raynal@bootlin.com
|
|
To improve human readability and enable automatic validation, the tuples
in "playback" and "capture" properties in sound device nodes should be
grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210204130022.1646427-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add master clock provider support to STM32 I2S.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20210205104404.18786-2-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Georgi writes:
interconnect changes for 5.12
Here are the interconnect changes for the 5.12-rc1 merge window
consisting of driver updates.
Driver changes:
- Refactoring and consolidation of drivers.
- New driver for MSM8939 platforms.
- New driver for SDX55 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add SDX55 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SDX55 DT bindings
interconnect: qcom: Add MSM8939 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
dt-bindings: interconnect: single yaml file for RPM interconnect drivers
interconnect: qcom: qcs404: use shared code
interconnect: qcom: Consolidate interconnect RPM support
|
|
Mediatek DRM Next for Linux 5.12
1. Decouple Mediatek DRM sub driver
2. Share mtk mutex driver for both DRM and MDP
3. Add support for SoC MT8183
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204151750.7550-1-chunkuang.hu@kernel.org
|
|
Signed-off-by: Bert Vermeulen <bert@biot.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Signed-off-by: Bert Vermeulen <bert@biot.com>
Link: https://lore.kernel.org/r/20210120135928.246054-2-bert@biot.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Firmware/co-processors might use reserved memory areas in order to pass
data stemming from an nvmem device otherwise non accessible to Linux.
For example an EEPROM memory only physically accessible to firmware, or
data only accessible early at boot time.
Introduce the dt-bindings to nvmem's rmem.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210129171430.11328-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the bindings for ETMs with system register accesses.
Link: https://lore.kernel.org/r/20210110224850.1880240-27-suzuki.poulose@arm.com
Cc: devicetree@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-29-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Properties in if/then schemas weren't getting checked by the meta-schemas.
Enabling meta-schema checks finds several errors.
The use of an 'items' schema (as opposed to the list form) is wrong in
some cases as it applies to all entries. 'contains' is the correct schema
to use in the case of multiple entries.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-crypto@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202205544.24812-3-robh@kernel.org
|
|
Fixing the compatible string typos results in an error in the example:
Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.example.dt.yaml:
iommu@fe951000: 'power-domains' is a required property
Based on the dts files, a 'power-domains' property only exists on Gen 3
which can be conditioned on !renesas,ipmmu-vmsa.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202205544.24812-2-robh@kernel.org
|
|
Running 'dt-validate -m' will flag any compatible strings missing a schema.
Fix all the errors found in DT binding examples. Most of these are just
typos.
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Vincent Cheng <vincent.cheng.xh@renesas.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Palmer <daniel@thingy.jp>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202205544.24812-1-robh@kernel.org
|
|
add description for postmask
postmask is used control round corner for display frame
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
rdma fifo size may be different even in same SOC, add this
property to the corresponding rdma
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Document the binding for the Realtek RTL838x/RTL839x interrupt controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
[maz: Add a commit message, as the author couldn't be bothered...]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210122204224.509124-2-bert@biot.com
|
|
This is required to bring up the PHY on MDM9607-based boards.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013124.54484-1-konrad.dybcio@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This compatible string is for the USB PHY on IPQ60xx systems.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/7e1e7bda6ccdaab9adeeb956fac1acc39908a8dc.1611756920.git.baruch@tkos.co.il
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatibles for the Qualcomm QMP PHY binding for the SuperSpeed USB
phys found in the SC8180x platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210121014339.1612525-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible for the SC8180x UFS PHY to the QMP binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210120224531.1610709-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
s/descibe/describe/
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210203153414.17044-1-unixbhaskar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generic OHCI binding needs to document all the specific compatible
strings so we can track undocumented compatible strings. Add all the
compatible strings from in tree users.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202175439.3904060-2-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generic EHCI binding needs to document all the specific compatible
strings so we can track undocumented compatible strings. Add all the
compatible strings from in tree users.
Turns out we also have the generic 'usb-ehci' compatible which is pretty
much the same binding and the correct one for the example, so let's add it.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202175439.3904060-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A compatible string 'enum' mistakenly has 'const: ' in the compatible
strings. Remove these.
Fixes: 0b28594d67a8 ("dt-bindings: thermal: Add YAML schema for sun8i-thermal driver bindings")
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amitk@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20210202181538.3936235-1-robh@kernel.org
|
|
The example and filename use 'adi,ad5686', but the schema doesn't
document it. The AD5686 is also a SPI interface variant while all the
documented variants have an I2C interface. So let's update all the
references to AD5686 to AD5696.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Michael Auchter <michael.auchter@ni.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210202215503.114113-1-robh@kernel.org
|
|
Add compatible for Cortex-A78 PMU
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210203055348.4935-3-seiya.wang@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Sort the bindings before adding new SM1 devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-2-christianshewitt@gmail.com
|
|
The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
contains registers for various IP blocks such as pin-controller bits for
the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
The registers can be accessed directly when not running in "secure mode".
When "secure mode" is enabled then these registers have to be accessed
through secure monitor calls.
So far these SoCs are always known to boot in "non-secure mode".
Add a binding documentation using syscon (as these registers are shared
across different IPs) for the SECBUS2 registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-3-martin.blumenstingl@googlemail.com
|
|
Amlogic Meson8, Meson8b and Meson8m2 SoCs embed an ARC EM4 core
typically used for managing system suspend. A section of the SoCs SRAM
is mapped as memory for this ARC core. Add new compatible strings for
the SRAM section for the ARC core memory.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-2-martin.blumenstingl@googlemail.com
|
|
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
board with an S922X-H chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210119145734.12675-2-christianshewitt@gmail.com
|
|
Add charger-supply optional property to enable charging control.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210130172747.2022977-2-timon.baetz@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120162400.4115366-3-arnd@kernel.org
|
|
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120162400.4115366-2-arnd@kernel.org
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120131559.1971359-2-arnd@kernel.org
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pm-domains:
- add support for MT8167
- add support for regulator needed by a PM domain
- make error message in deferred probe case better
cmdq-helper:
- remove arch specific flush function, use mailbox rx_callback instead
* tag 'v5.11-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pm-domains: Don't print an error if child domain is deferred
soc: mediatek: pm-domains: Add domain regulator supply
dt-bindings: power: Add domain regulator supply
soc: mediatek: cmdq: Remove cmdq_pkt_flush()
soc: mediatek: pm-domains: Add support for mt8167
dt-bindings: power: Add MT8167 power domains
Link: https://lore.kernel.org/r/5faa52c2-0ddb-b809-7444-ce6f6ff6d8ad@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
drivers: soc: Keystone update for v5.12
Updates include:
- Navigator refcount correction
- probe fix in pm driver
- fix clock init for PRUSS
- PRUSS binding doc update
- of_device_get_match_data() use in ringacc
* tag 'drivers_soc_for_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: ti: k3-ringacc: Use of_device_get_match_data()
soc: ti: pruss: Refactor the CFG sub-module init
dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include
soc: ti: pruss: Correct the pruss_clk_init error trace text
soc: ti: pm33xx: Fix some resource leak in the error handling paths of the probe function
soc: ti: knav_qmss: Put refcount for dev node in failure case
Link: https://lore.kernel.org/r/1612156854-10929-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This pull request contains Broadcom SoCs drivers changes for 5.12,
please pull the following:
- Rafal adds support for the Power Management Bus (PMB) which is used in
a variety of DSL/Cable modem/STB SoCs with a primary target being the
4908 Wi-Fi SoC from the DSL organization. He also adds empty stubs to
get the chip identification (family and revision) to permit the
Broadcom STB USB PHY driver from being decoupled from ARCH_BRCMSTB
- Florian removes an unused function and its header
* tag 'arm-soc/for-5.12/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: Remove soc_is_brcmstb()
soc: bcm: brcmstb: add stubs for getting platform IDs
soc: bcm: add PM driver for Broadcom's PMB
dt-bindings: power: document Broadcom's PMB binding
Link: https://lore.kernel.org/r/20210131221721.685974-5-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|