| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Lots of double occurrences of "the" were replaced by single occurrences,
but some of them should become "to the" instead.
Fixes: 12e5bde18d7f6ca4 ("dt-bindings: Fix typo in comment")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c5743c0a1a24b3a8893797b52fed88b99e56b04b.1660755148.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a compatible for DWC3 found on SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220716193257.456023-4-konrad.dybcio@somainline.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a wakeup-source property to the binding to describe whether the
wakeup interrupts can wake the system from suspend.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
My professional e-mail will change and the BayLibre one will
bounce after mid-september of 2022.
This updates the MAINTAINERS file, the YAML bindings and adds an
entry in the .mailmap file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816095617.948678-1-narmstrong@baylibre.com
|
|
Document the Broadcom STB memory controller which is a trivial binding
for now with a set of compatible strings and single register.
Since we introduce this binding, the section in
Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt is removed
and this binding is referenced instead.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[krzk: correct path in brcm,brcmstb.txt]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-2-f.fainelli@gmail.com
|
|
One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
pointer dereference fix for ttm, a error check fix for lvds-codec, a
dt-binding schema fix and an underflow fix for sun4i
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat
|
|
Add poll-interval support for the adc-joystick documentation. This is
an optional value and if not provided the adc-joystick works as it
does today (with buffers). If this value is provided, the adc-joystick
driver is polled at the specified interval. The existing attribute of
"poll-interval" was used instead of complying with property-units.yaml
after discussion of the issue on the mailing list.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/20220816210440.14260-2-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Document the bindings for the IBM Operation Panel, which provides
a simple interface to control a server. It has a display and three
buttons.
Also update MAINTAINERS for the new file.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220809204147.238132-2-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.
|
|
Add interconnect property for i.MX8MP hsio blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add interconnect property for i.MX8MP hdmi blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add interconnect property for i.MX8MP mediamix blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
in-tech smart charging is now chargebyte. So update the email address
accordingly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220815080626.9688-1-stefan.wahren@i2se.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull spi fixes from Mark Brown:
"A few fixes that came in since my pull request, the Meson fix is a
little large since it's fixing all possible cases of the problem that
was observed with the driver and clock API trying to share
configuration by integrating the device clocking fully with the clock
API rather than spot fixing the one instance that was observed"
* tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: Drop Pratyush Yadav
spi: meson-spicc: add local pow2 clock ops to preserve rate between messages
MAINTAINERS: rectify entry for ARM/HPE GXP ARCHITECTURE
spi: spi.c: Add missing __percpu annotations in users of spi_statistics
|
|
Pull regulator fixes from Mark Brown:
"A couple of small fixes that came in since my pull request, nothing
major here"
* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Fix missing error return from regulator_bulk_get()
regulator: pca9450: Remove restrictions for regulator-name
|
|
Even PSCI v1.0 compliant implementations may support v0.1 clients
(i.e. "arm,psci"). Relax the compatible schema such that an
implementation can claim 1.0, 0.2, and 0.1 compatibility.
In the process, the schema can be simplified a bit by using 'minItems'
instead of separate 'oneOf' entries.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220803201639.2552581-1-robh@kernel.org
|
|
JetHome JetHub D1p is a home automation controller, modification
of JetHub D1 based on Amlogic A113X
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220811103113.3097868-3-adeep@lexina.in
|
|
Add device tree binding documentation for Everest ES8326
----
v5 tested by dtschema
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: Zhu Ning <zhuning@everest-semi.com>
Link: https://lore.kernel.org/r/20220816024456.4475-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The max clock items for the dts node with compatible
'mediatek,mt8195-smi-sub-common' should be 3.
However, the dtbs_check of such node will get following message,
arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: smi@14010000: clock-names: ['apb', 'smi', 'gals0'] is too long
From schema: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
It's because the 'mediatek,mt8195-smi-sub-common' compatible incorrectly
matches the 'else' conditions for gen2 HW without gals.
Rewrite the 'else' condition to specifically identify the compatibles
that utilizing gen2 HW without gals.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220729063208.16799-3-tinghan.shen@mediatek.com
|
|
RZ/Five SoC is pin compatible with RZ/G2UL (Type 1) SoC. This patch
updates the comment to include RZ/Five SoC so that we make it clear
"renesas,r9a07g043-pinctrl" compatible string will be used for RZ/Five
SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220726175315.1147-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document RZ/Five (R9A07G043) SYSC bindings. The SYSC block found on the
RZ/Five SoC is almost identical to one found on the RZ/G2UL (and alike)
SoC's. "renesas,r9a07g043-sysc" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.
The SYSC block on RZ/Five has no interrupts to the core so to accommodate
this SoC make interrupts{,-names} properties optional.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220722141506.20171-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document the compatible values for the R-Car H3Ne-1.7G (R8A779MB)
SoC. This is a different grading of the R-Car H3-N (R8A77951) SoC.
All R-Car H3Ne-1.7G on-SoC devices are identical to the corresponding
devices on the R-Car H3-N SoC, and thus just use the compatible values
for the latter. The root compatible property does gain an additional
value, to sort out integration issues if they ever arise.
Document the use of this SoC on the Salvator-XS and ULCB (with and
without Kingfisher) development boards.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/f816f58d1c3fbd0605589e7648a43d78a4e1e694.1656072871.git.geert+renesas@glider.be
|
|
Document the newly added vdd supply option.
Signed-off-by: Crt Mori <cmo@melexis.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220808144936.1559158-1-cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
STMPE driver does not require a specific node name anymore, only the
compatible is checked, update binding according to this.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712163345.445811-5-francesco.dolcini@toradex.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the documentation for Richtek rtq6056.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1658242365-27797-2-git-send-email-u0084500@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree bindings for ltrf216a ambient light sensor.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Link: https://lore.kernel.org/r/20220725104050.491396-2-shreeya.patel@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the ti,am654-adc compatible already used in DTS:
arch/arm64/boot/dts/ti/k3-am642-evm.dtb: adc: compatible:0: 'ti,am654-adc' is not one of ['ti,am3359-adc', 'ti,am4372-adc']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727155203.320929-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When the thermal zone description was converted to yaml schema, the
required 'trips' property was forgotten.
The initial text bindings was describing:
"
[ ... ]
* Thermal zone nodes
The thermal zone node is the node containing all the required info
for describing a thermal zone, including its cooling device bindings. The
thermal zone node must contain, apart from its own properties, one sub-node
containing trip nodes and one sub-node containing all the zone cooling maps.
Required properties:
- polling-delay: The maximum number of milliseconds to wait between polls
Type: unsigned when checking this thermal zone.
Size: one cell
- polling-delay-passive: The maximum number of milliseconds to wait
Type: unsigned between polls when performing passive cooling.
Size: one cell
- thermal-sensors: A list of thermal sensor phandles and sensor specifier
Type: list of used while monitoring the thermal zone.
phandles + sensor
specifier
- trips: A sub-node which is a container of only trip point nodes
Type: sub-node required to describe the thermal zone.
Optional property:
- cooling-maps: A sub-node which is a container of only cooling device
Type: sub-node map nodes, used to describe the relation between trips
and cooling devices.
[ ... ]
"
Now the schema describes:
"
[ ... ]
required:
- polling-delay
- polling-delay-passive
- thermal-sensors
[ ... ]
"
Add the missing 'trips' property in the required properties.
Fixed: 1202a442a31fd ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809085629.509116-3-daniel.lezcano@linaro.org
|
|
Append "brcm,bcmbca" to BCM4908 chip family compatible strings to
follow the convention of BCMBCA chip and help identifying chip family.
Also add a bare bone generic 4908 board compatbile string to support any
4908 based board. This is useful for board bring-up test and kernel test
with CPU and memory related change.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220803175455.47638-3-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
Pointer SoCs. It was originally added by Rafał before Broadcom
started to upstream the support for broadband SoCs. Now that Broadcom
Broadband SoC is supported under arch ARCH_BCMBCA, this patch moves
BCM4908 SoC device tree descriptions into BCMBCA binding.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220803175455.47638-2-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Merge series from Sameer Pujar <spujar@nvidia.com>:
DT binding properties are available to fixup rate and channel
parameters of a DAI. This series extends this to sample format
conversion as well. With this now DAI PCM parameters (channels,
sample rate and sample format) can be fixed up as necessary in
an audio path.
|
|
Merge series from Tomer Maimon <tmaimon77@gmail.com>:
This patch set adds Arbel NPCM8XX Peripheral SPI (PSPI) support to PSPI NPCM
driver.
|
|
Merge series from Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>:
This patch enables the Microchip's FPGA QSPI and Polarfire SoC QSPI
controller support.
Tested spi-nand (W25N01GV) and spi-nor (MT25QL256A) on Microchip's
ICICLE kit. tested using both FPGA QSPI and Polarfie SoC QSPI.
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The spi-3wire property is device specific and should be accepted only if
device really needs them. Drop it from common spi-peripheral-props.yaml
schema, mention in few panel drivers which use it and include instead in
the SPI controller bindings. The controller bindings will provide
spi-3wire type validation and one place for description. Each device
schema must list the property if it is applicable.
The Samsung S6E63M0 panel uses also spi-cpha/cpol properties on at least
one board (ste-ux500-samsung-janice/dts), so add also these to the
panel's bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220810131311.428645-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The LPSPI has dma capability, so add dma property.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812073452.45763-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add i.MX93 LPSPI compatible
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812073452.45763-2-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Re-usable schemas should use additionalProperties:true, so the schema
using it will check for evaluated properties.
Fixes: e23917822d3c ("spi: dt-bindings: split peripheral prods")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220810131236.428529-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Microchip's PolarFire SoC QSPI IP core is based on coreQSPI,
so add coreqspi as a fallback to mpfs-qspi.
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220808064603.1174906-3-nagasuresh.relli@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add microchip coreQSPI compatible string and update the title/description
to reflect this addition.
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220808064603.1174906-2-nagasuresh.relli@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible string for Nuvoton BMC NPCM845 PSPI.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20220722114136.251415-2-tmaimon77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert Xilinx axi gpio binding documentation to YAML.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
When adding the D1 TCON bindings, I missed the conditional blocks that
restrict the binding for TCON LCD vs TCON TV hardware. Add the D1 TCON
variants to the appropriate blocks for DE2 TCON LCDs and TCON TVs.
Fixes: ae5a5d26c15c ("dt-bindings: display: Add D1 display engine compatibles")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220812073702.57618-1-samuel@sholland.org
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20220727164347.386398-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
|
|
Signed-off-by: Matt Flax <flatmax@flatmax.com>
Link: https://lore.kernel.org/r/20220814222218.119786-1-flatmax@flatmax.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the NXP SAI binding to DT schema format using json-schema.
The Synchronous Audio Interface (SAI) provides an interface that
supports full-duplex serial interfaces with frame synchronization
formats such as I2S, AC97, TDM, and codec/DSP interfaces.
Beside conversion, 'fsl,shared-interrupt' and '#sound-dai-cells'
are added for they are already used by some dts.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1659443394-9838-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Presently "convert-channels" and "convert-rate" DT bindings are available
for channel and rate fixups respectively.
Similarly add "convert-sample-format" binding to fixup DAI sample format
as well. This is added to audio-graph-card based bindings.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1659936452-2254-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "convert-channels" and "convert-rate" bindings are available for
audio-graph-card and are documented in the audio-graph-port.yaml and
the audio-graph.yaml. There is duplication of property details at
multiple places.
Introduce a new schema to have common definitions for DAI params and
these can be re-used in other schemas wherever applicable. Presently
update audio-graph-card bindings to use these definitions. If required
simple-card bindings can be extended to make use of common definitions.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1659936452-2254-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
|
Geert Uytterhoeven
Konrad Dybcio
Johan Hovold
Neil Armstrong
Florian Fainelli
Dave Airlie
Chris Morgan
Eddie James
Dmitry Torokhov
Peng Fan
Stefan Wahren
Linus Torvalds
Rob Herring
Vyacheslav Bocharov
Zhu Ning
Tinghan Shen
Lad Prabhakar
Crt Mori
Francesco Dolcini
ChiYuan Huang
Shreeya Patel
Krzysztof Kozlowski
Daniel Lezcano
William Zhang
Mark Brown
Naga Sureshkumar Relli
Tomer Maimon
Srinivas Neeli
Samuel Holland
Matt Flax
Shengjiu Wang
Sameer Pujar