| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Those properties are no longer parsed by the driver which is being passed
those information by the core now. Let's deprecate them.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200603134922.1352340-11-boris.brezillon@collabora.com
|
|
This patch adds the documentation of the device tree bindings for the STM32
FMC2 EBI controller.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1591975362-22009-4-git-send-email-christophe.kerello@st.com
|
|
These bindings can be used on SOCs where the FMC2 NAND controller is
in standalone. In case that the FMC2 embeds 2 controllers (an external
bus controller and a raw NAND controller), the register base address,
the clock and the reset will be defined in the parent node.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1591975362-22009-3-git-send-email-christophe.kerello@st.com
|
|
uart-has-rtscts is a boolean property. These are defined as present
(which means that this property evaluates to "true") or absent (which
means that this property evaluates to "false"). Remove the numeric value
from the example to make it comply with the boolean property bindings.
Fixes: 1cc2d0e021f867 ("dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Document qcom,pcie-ipq8064-v2 needed to use different phy_tx0_term_offset.
In ipq8064 phy_tx0_term_offset is 7. In ipq8064 v2 other SoC it's set to 0
by default.
Link: https://lore.kernel.org/r/20200615210608.21469-11-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
|
Document ext reset used in ipq8064 SoC by qcom PCIe driver.
Link: https://lore.kernel.org/r/20200615210608.21469-6-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
|
Document missing clks used in ipq8064 SoC.
Link: https://lore.kernel.org/r/20200615210608.21469-3-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
|
Convert the ingenic,pinctrl.txt doc file to ingenic,pinctrl.yaml.
In the process, some compatible strings now require a fallback, as the
corresponding SoCs are pin-compatible with their fallback variant.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200622113740.46450-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622192558.152828-3-konradybcio@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add device binding doc for pca9450 pmic driver.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1593793178-9737-3-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document board compatible names for Pine64 PinePhone 1.2.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20200703194842.111845-2-megous@megous.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The ch7322 is a Chrontel CEC controller.
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add device tree binding information for fan53880 regulator driver.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Link: https://lore.kernel.org/r/20200702210846.31659-3-chf.fritz@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull devicetree fixes from Rob Herring:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clock: imx: Fix e-mail address
dt-bindings: thermal: k3: Fix the reg property
dt-bindings: thermal: Remove soc unit address
dt-bindings: display: arm: versatile: Pass the sysreg unit name
dt-bindings: usb: aspeed: Remove the leading zeroes
dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
dt-bindings: mailbox: zynqmp_ipi: fix unit address
dt-bindings: bus: uniphier-system-bus: fix warning in example
scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
doc: devicetree: bindings: fix spelling mistake
docs: dt: minor adjustments at writing-schema.rst
dt: fix reference to olpc,xo1.75-ec.txt
dt: Fix broken references to renamed docs
dt: fix broken links due to txt->yaml renames
dt: update a reference for reneases pcar file renamed to yaml
|
|
Convert the analog TV, DVI, HDMI, and VGA connector bindings to DT schema
format.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630200216.1172566-1-robh@kernel.org
|
|
This patchset adds support for being able to change regulator modes for
the mt6397 regulator. This is needed to allow the voltage scaling
support in the MT8173 SoC to be used on the elm (Acer Chromebook R13)
and hana (several Lenovo Chromebooks) devices.
Without a of_map_mode implementation, the regulator-allowed-modes
devicetree field is skipped, and attempting to change the regulator mode
results in an error:
[ 1.439165] vpca15: mode operation not allowed
Changes in v2:
- Introduce constants in dt-bindings
- Improve conditional readability
Anand K Mistry (4):
regulator: mt6397: Move buck modes into header file
dt-bindings: regulator: mt6397: Document valid modes
regulator: mt6397: Implement of_map_mode
arm64: dts: mediatek: Update allowed mt6397 regulator modes for elm
boards
.../bindings/regulator/mt6397-regulator.txt | 3 +++
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 +++-
drivers/regulator/mt6397-regulator.c | 17 ++++++++++++++---
.../regulator/mediatek,mt6397-regulator.h | 15 +++++++++++++++
4 files changed, 35 insertions(+), 4 deletions(-)
create mode 100644 include/dt-bindings/regulator/mediatek,mt6397-regulator.h
--
2.27.0.212.ge8ba1cc988-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
|
|
This patchset adds support for being able to change regulator modes for
the da9211 regulator. This is needed to allow the voltage scaling
support in the MT8173 SoC to be used in the elm (Acer Chromebook R13)
and hana (several Lenovo Chromebooks) devices.
Anand K Mistry (4):
regulator: da9211: Move buck modes into header file
dt-bindings: regulator: da9211: Document allowed modes
regulator: da9211: Implement of_map_mode
arm64: dts: mediatek: Update allowed regulator modes for elm boards
.../devicetree/bindings/regulator/da9211.txt | 4 +++
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 ++-
drivers/regulator/da9211-regulator.c | 30 +++++++++++++++----
.../regulator/dlg,da9211-regulator.h | 16 ++++++++++
4 files changed, 47 insertions(+), 7 deletions(-)
create mode 100644 include/dt-bindings/regulator/dlg,da9211-regulator.h
--
2.27.0.212.ge8ba1cc988-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
|
|
This patch adds a description of how operating modes may be specified.
Signed-off-by: Anand K Mistry <amistry@google.com>
Link: https://lore.kernel.org/r/20200702131350.2.I6131e251d13f60d8c5347bb4faa9dc2364c87848@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree binding information for sy8827n regulator driver.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200702171335.59f5e79b@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document valid mode values for BUCK regulators.
Signed-off-by: Anand K Mistry <amistry@google.com>
Link: https://lore.kernel.org/r/20200702162231.v2.2.I0a814b246cfe47f8dd1e25553ee881cbcfd0d8eb@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The following build warnings are seen with 'make dt_binding_check':
Documentation/devicetree/bindings/sound/simple-card.example.dts:209.46-211.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:213.37-215.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:250.42-261.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:263.42-288.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:270.32-272.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:273.23-275.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:276.23-278.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@2: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:279.23-281.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@3: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:290.42-303.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@2: node has a unit name, but no reg or ranges property
Fix them all.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630223020.25546-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While applying commit 9909bc43a2e2 ("dt-bindings: MIPS: Document Ingenic
SoCs binding.") I've messed up by "fixing" indentation in a C style,
which is wrong for yaml files. Replace tabs back to spaces.
Fixes: 9909bc43a2e2 ("dt-bindings: MIPS: Document Ingenic SoCs binding.")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This is the movement of the wilc1000 driver out of staging, pulled in
here so that we do not end up doing duplicate work.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* 'wilc1000-move-out-of-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next:
wilc1000: move wilc driver out of staging
|
|
Add compatible for IPQ8074 support.
This does not need clocks for scm calls.
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1589362265-22702-9-git-send-email-gokulsri@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add a devicetree binding for the Qualcomm peripheral image loader
relocation information region found in the IMEM.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The freescale.com domain is gone for quite some time.
Use the nxp.com domain instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200701005346.1008-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
HyperFlash connected to the SoC to be accessed via the external address
space read mode or the manual mode.
Document the device tree bindings for the Renesas RPC-IF found in the R-Car
gen3 SoCs.
Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Link: https://lore.kernel.org/r/54a84c75-fa17-9976-d9a6-a69ef67c418b@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Changes in v4:
- Modified qcom,pmic-typec binding to include the SS mux and the DRD remote
endpoint nodes underneath port@1, which is assigned to the SSUSB path
according to usb-connector
- Added usb-connector reference to the typec dt-binding
- Added tags to the usb type c and vbus nodes
- Removed "qcom" tags from type c and vbus nodes
- Modified Kconfig module name, and removed module alias from the typec driver
Changes in v3:
- Fix driver reference to match driver name in Kconfig for
qcom_usb_vbus-regulator.c
- Utilize regulator bitmap helpers for enable, disable and is enabled calls in
qcom_usb_vbus-regulator.c
- Use of_get_regulator_init_data() to initialize regulator init data, and to
set constraints in qcom_usb_vbus-regulator.c
- Remove the need for a local device structure in the vbus regulator driver
Changes in v2:
- Use devm_kzalloc() in qcom_pmic_typec_probe()
- Add checks to make sure return value of typec_find_port_power_role() is
valid
- Added a VBUS output regulator driver, which will be used by the PMIC USB
type c driver to enable/disable the source
- Added logic to control vbus source from the PMIC type c driver when
UFP/DFP is detected
- Added dt-binding for this new regulator driver
- Fixed Kconfig typec notation to match others
- Leave type C block disabled until enabled by a platform DTS
Add the required drivers for implementing type C orientation and role
detection using the Qualcomm PMIC. Currently, PMICs such as the PM8150B
have an integrated type C block, which can be utilized for this. This
series adds the dt-binding, PMIC type C driver, and DTS nodes.
The PMIC type C driver will register itself as a type C port w/ a
registered type C switch for orientation, and will fetch a USB role switch
handle for the role notifications. It will also have the ability to enable
the VBUS output to any connected devices based on if the device is behaving
as a UFP or DFP.
Wesley Cheng (6):
usb: typec: Add QCOM PMIC typec detection driver
dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
arm64: boot: dts: qcom: pm8150b: Add node for USB type C block
regulator: Add support for QCOM PMIC VBUS booster
dt-bindings: regulator: Add dt-binding for QCOM PMIC VBUS output
regulator
arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
.../regulator/qcom,usb-vbus-regulator.yaml | 41 +++
.../bindings/usb/qcom,pmic-typec.yaml | 113 +++++++
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 13 +
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 +
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_usb_vbus-regulator.c | 97 ++++++
drivers/usb/typec/Kconfig | 12 +
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/qcom-pmic-typec.c | 275 ++++++++++++++++++
10 files changed, 567 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
create mode 100644 drivers/regulator/qcom_usb_vbus-regulator.c
create mode 100644 drivers/usb/typec/qcom-pmic-typec.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
|
|
IPQ6018 uses the PMIC MP5496. Add the binding for the same.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Link: https://lore.kernel.org/r/1592889472-6843-4-git-send-email-kathirav@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. It is based on
Sitronix ST7703 LCD controller just like rocktech,jh057n00900. It is
used in PinePhone.
Add a compatible for it.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-4-megous@megous.com
|
|
Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-3-megous@megous.com
|
|
Shenzhen Xingbangda Display Technology Co., Ltd is a company which
produces LCD modules. It supplies the LCD panels for the PinePhone.
Add the vendor prefix of it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-2-megous@megous.com
|
|
This describes how to enable the Qualcomm PMIC VBUS booster used for
providing power to connected USB peripherals when the USB role is host
mode. The driver itself will register the vbus_usb regulator, so that
external drivers can utilize the enable/disable regulator APIs.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20200626185516.18018-6-wcheng@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Hi,
Changes since v3:
- Fix the single clock source handling and typo
Changes since v2:
- DT binding:
- use proper (?) patch subject for the binding docuemtn patch
- drop pll4 and pll15 from DT - driver should check the rate via
clk_get_parent. If it is not available (as it is not currently) then use the
match_data provided rates.
- add simple explanation for the clocking setup
- Use descriptive names for clocks: cpb/ivi-mcasp-auxclk and cpb/ivi-codec-scki
- dt_binding_check shows no errors/warnings
- ASoC machine driver:
- Try to read the PLL4/15 rate with clk API (parent of the two clock divider)
if it is not available then use the match_data provided numbers.
- Support for single PLL setup
Changes since v1:
- Fixed DT binding documentation errors
- Rebased on ASoC head and updated the driver to compile and work
This series adds support for the analog audio setup on the j721e EVM.
The audio setup of the EVM is:
Common Processor Board (CPB): McASP10 <-> pcm3168a
Infotainment Expansion Board (IVI): McASP0 <-> 2x pcm3168a
Both CPB and IVI wired in parallel serializer setup.
The first patch adds the stream_name for McASP driver as it is needed in
multicodec (and would be needed in DPCM) setup for proper DAPM handling.
The second patch adds two DT schema, one for the cpb and one for the cpb+ivi
card.
Regards,
Peter
---
Peter Ujfalusi (3):
ASoC: ti: davinci-mcasp: Specify stream_name for playback/capture
ASoC: dt-bindings: Add documentation for TI j721e EVM (CPB and IVI)
ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)
.../bindings/sound/ti,j721e-cpb-audio.yaml | 95 ++
.../sound/ti,j721e-cpb-ivi-audio.yaml | 150 +++
sound/soc/ti/Kconfig | 8 +
sound/soc/ti/Makefile | 2 +
sound/soc/ti/davinci-mcasp.c | 3 +
sound/soc/ti/j721e-evm.c | 896 ++++++++++++++++++
6 files changed, 1154 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
create mode 100644 sound/soc/ti/j721e-evm.c
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
|
|
Audio Graph Card is using "audio-graph-card" prefix instead of
"simple-graph-card", and moreover "widgets / routing" doesn't need it.
This patch removes unsupported "simple-graph-card" prefix from
motorola-mapphone-common.dtsi and vendor-prefixes.yaml.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/87r1ub39hq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The following build warnings are seen with 'make dt_binding_check':
Documentation/devicetree/bindings/sound/simple-card.example.dts:209.46-211.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:213.37-215.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:250.42-261.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:263.42-288.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:270.32-272.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:273.23-275.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:276.23-278.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@2: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:279.23-281.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@3: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:290.42-303.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@2: node has a unit name, but no reg or ranges property
Fix them all.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630223020.25546-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
intel,keembay-i2s has two register regions:
- I2S registers
- I2S gen configuration
Describe these regions accordingly to fix the following warning seen
with 'make dt_binding_check':
Documentation/devicetree/bindings/sound/intel,keembay-i2s.example.dt.yaml: example-0: i2s@20140000:reg:0: [538181632, 512, 539623588, 4] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630224459.27174-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The audio support on the Common Processor Board board is using
pcm3168a codec connected to McASP10 serializers in parallel setup.
The Infotainment board plugs into the Common Processor Board, the support
of the extension board is extending the CPB audio support by adding
the two codecs on the expansion board.
The audio support on the Infotainment Expansion Board consists of McASP0
connected to two pcm3168a codecs with dedicated set of serializers to each.
The SCKI for pcm3168a is sourced from j721e AUDIO_REFCLK0 pin.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200630125843.11561-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DT examples are by default compiled in a parent that has
#address-cells and #size-cells both set to 1. Fix the example
accordingly, even if it doesn't match the actual hardware, as this is
the recommended practice for DT bindings examples.
Fixes: cea0f76a483d ("dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200701134853.30656-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support of generic DT binding for annoucing RTS/CTS lines. The initial
binding 'st,hw-flow-control' is not needed anymore since generic binding
is available, but is kept for backward compatibility.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200520133932.30441-2-erwan.leray@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace http:// links with https:// links. This reduces the likelihood of
man-in-the-middle attacks when developers open these links.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
[bhelgaas: also update samsung.com links, drop sourceforge link]
Link: https://lore.kernel.org/r/20200627103050.71712-1-grandmaster@al2klimov.de
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Using 'syscon' alone should be avoided as compatible strings should be
specific enough to identify the exact set of registers contained. Update
the schema to ensure at least 2 compatible strings are present.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Adjust the reg property to fix the following warning seen with
'make dt_binding_check':
Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630122527.28640-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove the soc unit address to fix the following warnings seen with
'make dt_binding_check':
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/thermal/thermal-zones.example.dts:23.20-50.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630121804.27887-1-festevam@gmail.com
[robh: also fix thermal-zones.yaml example]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pass the sysreg unit name to fix the following warning seen with
'make dt_binding_check':
Warning (unit_address_vs_reg): /example-0/sysreg: node has a reg or ranges property, but no unit name
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629215500.18037-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove the leading zeroes to fix the following warning seen with
'make dt_binding_check':
Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dts:37.33-42.23: Warning (unit_address_format): /example-0/usb-vhub@1e6a0000/vhub-strings/string@0409: unit name should not have leading 0s
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629214027.16768-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
There are two processed schema files:
- processed-schema-examples.yaml
Used for 'make dt_binding_check'. This is always a full schema.
- processed-schema.yaml
Used for 'make dtbs_check'. This may be a full schema, or a smaller
subset if DT_SCHEMA_FILES is given by a user.
If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.
If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Currently, processed-schema.yaml is always built, but it is actually
used only for 'make dtbs_check'.
'make dt_binding_check' uses processed-schema-example.yaml instead.
Build processed-schema.yaml only for 'make dtbs_check'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-3-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We are having more and more schema files.
Commit 8b6b80218b01 ("dt-bindings: Fix command line length limit
calling dt-mk-schema") fixed the 'Argument list too long' error of
the schema checks, but the same error happens while cleaning too.
'make clean' after 'make dt_binding_check' fails as follows:
$ make dt_binding_check
[ snip ]
$ make clean
make[2]: execvp: /bin/sh: Argument list too long
make[2]: *** [scripts/Makefile.clean:52: __clean] Error 127
make[1]: *** [scripts/Makefile.clean:66: Documentation/devicetree/bindings] Error 2
make: *** [Makefile:1763: _clean_Documentation] Error 2
'make dt_binding_check' generates so many .example.dts, .dt.yaml files,
which are passed to the 'rm' command when you run 'make clean'.
I added a small hack to use the 'find' command to clean up most of the
build artifacts before they are processed by scripts/Makefile.clean
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-2-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Fix unit address to match the first address specified in the reg
property of the node in example.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
Boris Brezillon
Christophe Kerello
Martin Blumenstingl
Ansuel Smith
Paul Cercueil
Konrad Dybcio
Robin Gong
Ondrej Jirman
Jeff Chase
Christoph Fritz
Linus Torvalds
Rob Herring
Mark Brown
Anand K Mistry
Jisheng Zhang
Fabio Estevam
Thomas Bogendoerfer
Greg Kroah-Hartman
Gokul Sriram Palanisamy
Bjorn Andersson
Sergei Shtylyov
Kathiravan T
Icenowy Zheng
Wesley Cheng
Kuninori Morimoto
Peter Ujfalusi
Laurent Pinchart
Erwan Le Ray
Alexander A. Klimov
Masahiro Yamada
Kangmin Park