aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2020-05-03dt-bindings: arm: Add Calxeda system registers json-schema bindingAndre Przywara1-0/+49
The Calxeda system registers are a collection of MMIO register controlling several more general aspects of the SoC. Beside for some power management tasks this node is also somewhat abused as the container for the clock nodes. Add a binding in DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: ipmi: Convert IPMI-SMIC bindings to json-schemaAndre Przywara2-25/+63
Convert the generic IPMI controller bindings to DT schema format using json-schema. The device_type property is deprecated for most node per the DT spec, but at least the Linux driver matches on it, so I keep it in. The Linux driver parses for some additional and optional properties, but there are no in-tree users. Let's allow extra properties to cover any other users. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: memory-controllers: Convert Calxeda DDR to json-schemaAndre Przywara2-16/+42
Convert the Calxeda DDR memory controller binding to DT schema format using json-schema. Although this technically covers the whole DRAM controller, the intention to use it only for error reporting and mapping fault addresses to DRAM chips. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: arm: Convert Calxeda L2 cache controller to json-schemaAndre Przywara2-15/+42
Convert the L2-ECC controller binding to DT schema format using json-schema. This is indented to be just used for error reporting. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schemaAndre Przywara2-17/+51
Convert the Calxeda ComboPHY binding to DT schema format using json-schema. There is no driver in the Linux kernel matching the compatible string, but the nodes are parsed by the SATA driver, which links to them using its port-phys property. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: net: Convert Calxeda Ethernet binding to json-schemaAndre Przywara2-18/+49
Convert the Calxeda XGMAC Ethernet device binding to DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: sata: Convert Calxeda SATA controller to json-schemaAndre Przywara2-44/+95
Convert the Calxeda Highbank SATA controller binding to DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: clock: Convert Calxeda clock bindings to json-schemaAndre Przywara2-17/+82
Convert the Calxeda clock bindings to DT schema format using json-schema. This just covers the actual PLL and divider clock nodes. In the actual DTs they are somewhat unconnected (no ranges or bus compatible) children of the sregs node, but for the actual clock bindings this is not relevant. One oddity is that the addresses are relative to the parent node, without that being pronounced using a ranges property. But this is too late to fix now. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: Remove cases of 'allOf' containing a '$ref'Rob Herring122-1446/+1133
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: power: supply: add cw2015_battery bindingsTobias Schramm1-0/+82
This patch adds the dts binding schema for the cw2015 fuel gauge. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-03dt-bindings: Document cellwise vendor-prefixTobias Schramm1-0/+2
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-03iio: DAC extension for ltc2634-12/10/8Chris Ruehl1-1/+7
This patch add support for Analog Devices (Linear Technology) LTC2634 Quad 12-/10-/8-Bit Rail-to-Rail DAC. The SPI functionality based on them from LTC2632 therefor add the definitions only and update the Kconfig. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03dt-bindings: magnetometer: ak8974: Add Alps hscdtd008aNick Reitemeyer1-1/+3
Add binding documentation for the Alps HSCDTD008A, which is similar to the ak8974. Signed-off-by: Nick Reitemeyer <nick.reitemeyer@web.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03dt-bindings: iio: chemical: Add binding for CCS811 VOC sensorManivannan Sadhasivam1-0/+53
This commit adds devicetree binding for AMS CCS811 VOC sensor. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03dt-bindings: iio: Add adis16475 documentationNuno Sá1-0/+137
Document the ADIS16475 device devicetree bindings Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-02Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-4/+3
Pull dmaengine fixes from Vinod Koul: "Core: - Documentation typo fixes - fix the channel indexes - dmatest: fixes for process hang and iterations Drivers: - hisilicon: build error fix without PCI_MSI - ti-k3: deadlock fix - uniphier-xdmac: fix for reg region - pch: fix data race - tegra: fix clock state" * tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dmatest: Fix process hang when reading 'wait' parameter dmaengine: dmatest: Fix iteration non-stop logic dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization dmaengine: fix channel index enumeration dmaengine: mmp_tdma: Reset channel error on release dmaengine: mmp_tdma: Do not ignore slave config validation errors dmaengine: pch_dma.c: Avoid data race between probe and irq handler dt-bindings: dma: uniphier-xdmac: switch to single reg region include/linux/dmaengine: Typos fixes in API documentation dmaengine: xilinx_dma: Add missing check for empty list dmaengine: ti: k3-psil: fix deadlock on error path dmaengine: hisilicon: Fix build error without PCI_MSI
2020-05-02dt-bindings: power: Convert power_supply text to yamlDan Murphy2-23/+42
Convert the power_supply.txt to power-supply.yaml. This conversion entailed fixing up the binding to being yaml and dt checker compliant. Added a note in the power_supply.txt to reference the power-supply.yaml Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-02dt-bindings: Add binding for IT6505.allen1-0/+91
Add a DT binding documentation for IT6505. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed example to use i2c] Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-3-git-send-email-allen.chen@ite.com.tw
2020-05-02dt-bindings: fix vendor prefix for ITE Tech. Inc.allen1-1/+1
ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC design house. ITE's core technology includes PC and NB Controller chips, Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing, Surveillance, OFDM, Sensor Fusion, and so on. Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.". more information on: http://www.ite.com.tw/ Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Acked-by: Rob Herring <robh@kernel.org> Fixes: 17ff9478ffa3 ("dt-bindings: Add ITE Tech prefix") Cc: Marek Vasut <marex@denx.de> Cc: devicetree@vger.kernel.org Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag and updated subject] Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-2-git-send-email-allen.chen@ite.com.tw
2020-05-01dt-bindings: Add a minimum version check for dtschemaRob Herring1-3/+11
The dtschema package must be somewhat up to date as the tools and meta-schema checks are still evolving. Implement a version check, so this can be enforced. This will help ensure new schema submissions get checked against the latest meta-schemas. Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-01dt-bindings: serial: Convert 8250 to json-schemaLubomir Rintel2-102/+233
Some fixes were done during the conversion: Slightly better examples. The original example was for an OMAP serial port, which is not even described by this binding, but by omap_serial.txt instead. Added compatible strings, that were used, byt not documented: andestech,uart16550, cavium,octeon-3860-uart, fsl,16550-FIFO64, nvidia,tegra186-uart, nvidia,tegra194-uart, nxp,lpc1850-uart, opencores,uart16550-rtlsvn105, ralink,mt7620a-uart, ralink,rt3052-uart, ralink,rt3883-uart and xlnx,xps-uart16550-2.00.b. Removed "serial" compatible string. It's redundant with the node name (which, in OFW, serves the same purpose as the compatible string). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [robh: allow additional properties. clocks/clock-frequency can be optional on original 8250 series with standard clocks] Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-01dt-bindings: sound: wm8994: Correct required supplies based on actual implementaionKrzysztof Kozlowski1-6/+12
The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>). Reported-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200501133534.6706-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-30dt-bindings: add Qualcomm IPQ4019 MDIO bindingsRobert Marko1-0/+61
This patch adds the binding document for the IPQ40xx MDIO driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30dt-bindings: serial: Move Marvell compatible string to 8250 binding docLubomir Rintel2-4/+2
These ports are compatible with NS8250 and handled by the same driver. Get rid of the extra document that fails to document the properties that are actually supported. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-30Merge branch 'dt/linus' into 'dt/next'Rob Herring8-19/+32
2020-04-29dt-bindings, firmware: add compatible value Intel Stratix10 service layer bindingRichard Gong1-1/+1
A a compatible property value to Intel Stratix10 service layer binding Signed-off-by: Richard Gong <richard.gong@intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2020-04-29dt-bindings: fpga: add compatible value to Stratix10 SoC FPGA manager bindingRichard Gong1-1/+2
Add a compatible property value to Stratix10 SoC FPGA manager binding file Signed-off-by: Richard Gong <richard.gong@intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2020-04-29ASoC: dt-bindings: simple-card: switch to yaml base DocumentationKuninori Morimoto2-351/+484
This patch switches from .txt base to .yaml base Document. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/87sghovzwb.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-28bus: Add DT bindings for Integrator/AP logic modulesLinus Walleij1-0/+83
This adds YAML device tree bindings for the Integrator/AP logic modules. These are plug-in tiles used typically for FPGA prototyping. Reviewed-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20200320134524.52140-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-28dt-bindings: iio: adi,ltc2983: Add missing quotes on dependenciesRob Herring1-2/+2
With the bracketed list form, any strings with commas have to be quoted or they are separated. Fixes: 3986a14870cb ("dt-bindings: iio: Add ltc2983 documentation") Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: linux-iio@vger.kernel.org Acked-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-28dt-bindings: i2c: i2c-stm32f7: add st,stm32mp15-i2c compatibleAlain Volmat1-2/+4
Add a new stm32mp15 specific compatible to handle FastMode+ registers which are different on the stm32mp15 compared to the stm32f7 or stm32h7. Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-28dt-bindings: interconnect: Add bindings for imx8m nocLeonard Crestez1-0/+101
Add initial dt bindings for the interconnects inside i.MX chips. Multiple external IPs are involved but SOC integration means the software controllable interfaces are very similar. Main NOC node acts as interconnect provider if #interconnect-cells is present. Currently there is a single imx interconnect provider for the whole SOC. Other pieces of scalable interconnects can be present, each with their own OPP table. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/8b341d91e9aee679ae69feb22a2c842b2aeb2137.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-28Merge branch 'for-5.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.8Mark Brown1-1/+1
2020-04-28dt-bindings: net: bluetooth: Add device tree bindings for QCA9377Christian Hewitt1-0/+5
QCA9377 is a QCA ROME device frequently found in Android TV boxes. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-28dt-bindings: pinctrl: qcom: Add sm8250 pinctrl bindingsBjorn Andersson1-0/+147
Add device tree binding Documentation details for Qualcomm SM8250 pinctrl driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200417061907.1226490-2-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-28dt-bindings: reset: rcar-rst: Document r8a7742 reset moduleLad Prabhakar1-0/+1
Document bindings for the RZ/G1H (R8A7742) reset module. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-28dt-bindings: power: rcar-sysc: Document r8a7742 SYSC bindingLad Prabhakar1-0/+1
Add binding documentation for the RZ/G1H (R8A7742) SYSC block. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-28dt-bindings: clock: renesas: cpg-mssr: Document r8a7742 bindingLad Prabhakar1-0/+1
Add binding documentation for the RZ/G1H (R8A7742) Clock Pulse Generator driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587678050-23468-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-28phy: qcom: qmp: Add SM8250 UFS PHYBjorn Andersson1-0/+5
The SM8250 UFS PHY can run off the same initialization sequence as SM8150, but add the compatible to allow future changes. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-27dt-bindings: net: convert qca,ar71xx documentation to yamlOleksij Rempel2-45/+216
Now that we have the DT validation in place, let's convert the device tree bindings for the Atheros AR71XX over to a YAML schemas. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27dt-bindings: dma: add direct mode support through device tree in stm32-dmaAmelie Delaunay1-0/+5
Direct mode or FIFO mode is computed by stm32-dma driver. Add a way for the user to force direct mode, by setting bit 2 in the bitfield value specifying DMA features in the device tree. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20200422102904.1448-2-amelie.delaunay@st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-27Merge tag 'v5.7-rc3' into spi-5.8Mark Brown43-168/+271
Linux 5.7-rc3
2020-04-27regulator: max77826: Remove erroneous additionalPropertiesIskren Chernev1-1/+0
In this particular location additionalProperties actually declares a property named `additionalProperties` instead of specifying there should be no other properties. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20200425125335.2674534-1-iskren.chernev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-27Merge 5.7-rc3 into staging-nextGreg Kroah-Hartman43-168/+271
We need the staging fixes in here too, and this resolves a merge issue with the vt6656 driver. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27dt-bindings: leds: Add binding for sgm3140Luca Weiss1-0/+62
Add YAML devicetree binding for SGMICRO SGM3140 charge pump used for camera flash LEDs. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-04-26Merge tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds3-1/+4
Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for 5.7-rc3. Nothing huge, just the usual collection of: - xhci fixes - gadget driver fixes - syzkaller fuzzing fixes - new device ids and DT bindings - new quirks added for broken devices A few of the gadget driver fixes show up twice here as they were applied to my branch, and also by Felipe to his branch which I then pulled in as we got out of sync a bit. All of these have been in linux-next with no reported issues" * tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) USB: sisusbvga: Change port variable from signed to unsigned usb-storage: Add unusual_devs entry for JMicron JMS566 USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") USB: hub: Fix handling of connect changes during sleep usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer xhci: Don't clear hub TT buffer on ep0 protocol stall xhci: prevent bus suspend if a roothub port detected a over-current condition xhci: Fix handling halted endpoint even if endpoint ring appears empty usb: raw-gadget: Fix copy_to/from_user() checks usb: raw-gadget: fix raw_event_queue_fetch locking usb: gadget: udc: atmel: Fix vbus disconnect handling usb: dwc3: gadget: Fix request completion check USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE phy: tegra: Select USB_COMMON for usb_get_maximum_speed() usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset() cdc-acm: introduce a cool down cdc-acm: close race betrween suspend() and acm_softint UAS: fix deadlock in error handling and PM flushing work UAS: no use logging any details in case of ENODEV ...
2020-04-26Merge tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds1-1/+1
Pull staging/IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.7-rc3 Lots of tiny things for reported issues in staging and IIO drivers, including a counter driver fix as well (the iio drivers seem to be tied to those). Full details of the fixes are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits) staging: vt6656: Fix calling conditions of vnt_set_bss_mode staging: comedi: Fix comedi_device refcnt leak in comedi_open staging: vt6656: Fix pairwise key entry save. staging: vt6656: Fix drivers TBTT timing counter. staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default. MAINTAINERS: remove Stefan Popa's email iio: adc: ad7192: fix null pointer de-reference crash during probe iio: core: remove extra semi-colon from devm_iio_device_register() macro iio: adc: ti-ads8344: properly byte swap value iio: imu: inv_mpu6050: fix suspend/resume with runtime power iio: st_sensors: rely on odr mask to know if odr can be set iio: xilinx-xadc: Make sure not exceed maximum samplerate iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode iio: xilinx-xadc: Fix clearing interrupt when enabling trigger iio: xilinx-xadc: Fix ADC-B powerdown iio: dac: ad5770r: fix off-by-one check on maximum number of channels iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device iio: core: Fix handling of 'dB' dt-bindings: iio: adc: stm32-adc: fix id relative path counter: 104-quad-8: Add lock guards - generic interface ...
2020-04-26Merge tag 'devicetree-fixes-for-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds8-19/+32
Pull more Devicetree fixes from Rob Herring: "A couple of schema and kbuild fixes" * tag 'devicetree-fixes-for-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: phy: qcom-qusb2: Fix defaults dt-bindings: Fix erroneous 'additionalProperties' dt-bindings: Fix command line length limit calling dt-mk-schema dt-bindings: Re-enable core schemas for dtbs_check
2020-04-26i2c: regroup documentation of bindingsWolfram Sang1-27/+39
Some bindings are for the bus master, some are for the slaves. Regroup them and give them separate headings to make it clear. Also, remove references to "generic names" which is for nodes and not for compatibles. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26dt-bindings: i2c: i2c-stm32f7: allow clock-frequency rangeAlain Volmat1-4/+4
For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters match, the bus clock frequency can be from 1Hz to 1MHz. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.