aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/gpu (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-03-25Merge tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+1
Pull pci updates from Bjorn Helgaas: "Enumeration: - Move the VGA arbiter from drivers/gpu to drivers/pci because it's PCI-specific, not GPU-specific (Bjorn Helgaas) - Select the default VGA device consistently whether it's enumerated before or after VGA arbiter init, which fixes arches that enumerate PCI devices late (Huacai Chen) Resource management: - Support BAR sizes up to 8TB (Dongdong Liu) PCIe native device hotplug: - Fix "Command Completed" tracking to avoid spurious timouts when powering off empty slots (Liguang Zhang) - Quirk Qualcomm devices that don't implement Command Completed correctly, again to avoid spurious timeouts (Manivannan Sadhasivam) Peer-to-peer DMA: - Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist (Michael J. Ruhl) APM X-Gene PCIe controller driver: - Revert generic DT parsing changes that broke some machines in the field (Marc Zyngier) Freescale i.MX6 PCIe controller driver: - Allow controller probe to succeed even when no devices currently present to allow hot-add later (Fabio Estevam) - Enable power management on i.MX6QP (Richard Zhu) - Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no device is connected (Richard Zhu) Marvell Aardvark PCIe controller driver: - Fix MSI and MSI-X support (Marek Behún, Pali Rohár) - Add support for ERR and PME interrupts (Pali Rohár) Marvell MVEBU PCIe controller driver: - Add DT binding and support for "num-lanes" (Pali Rohár) - Add support for INTx interrupts (Pali Rohár) Microsoft Hyper-V host bridge driver: - Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun Feng) Qualcomm PCIe controller driver: - Add SM8450 DT binding and driver support (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Help the controller get to the L1 state since the hardware can't do it on its own (Marek Vasut) - Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek Vasut) SiFive FU740 PCIe controller driver: - Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks) - Force 2.5GT/s for initial device probe (Ben Dooks) Socionext UniPhier Pro5 controller driver: - Add NX1 DT binding and driver support (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Restore MSI configuration so MSI works after resume (Jisheng Zhang)" * tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) x86/PCI: Add #includes to asm/pci_x86.h PCI: ibmphp: Remove unused assignments PCI: cpqphp: Remove unused assignments PCI: fu740: Remove unused assignments PCI: kirin: Remove unused assignments PCI: Remove unused assignments PCI: Declare pci_filp_private only when HAVE_PCI_MMAP PCI: Avoid broken MSI on SB600 USB devices PCI: fu740: Force 2.5GT/s for initial device probe PCI: xgene: Revert "PCI: xgene: Fix IB window setup" PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup" PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present PCI: imx6: Invoke the PHY exit function after PHY power off PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access() PCI: dwc: Restore MSI Receiver mask during resume PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup PCI/VGA: Replace full MIT license text with SPDX identifier PCI/VGA: Use unsigned format string to print lock counts PCI/VGA: Log bridge control messages when adding devices ...
2022-03-09PCI/VGA: Move vgaarb to drivers/pciBjorn Helgaas1-1/+1
The VGA arbiter is really PCI-specific and doesn't depend on any GPU things. Move it to the PCI subsystem. Note that misc_init() must be called before vga_arb_device_init(). These are both subsys_initcalls, so this ordering depends on the link order, which is determined by drivers/Makefile: obj-y += pci/ obj-y += char/ <-- misc_init() obj-y += gpu/ <-- vga_arb_device_init() (before this commit) The drivers/pci/ subsys_initcalls are called *before* misc_init(), so convert vga_arb_device_init() to subsys_initcall_sync(), which is called after *all* subsys_initcalls. Link: https://lore.kernel.org/r/20220224224753.297579-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-03-04Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-11/+36
drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Improve performance of some fbdev ops, in some cases up to 6x faster. Core Changes: - Some small DP fixes. - Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode to retrieve mode. - Add drm_object_property_get_default_value and use it for resetting zpos in plane state reset, removing the need for individual drivers to do it. - Same for color encoding and color range props. - Update panic handling todo doc. - Add todo that format conversion helpers should be sped up similarly to fbdev ops. Driver Changes: - Add panel orientation property to simpledrm for quirked panels. - Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x. - Add crc support to stm/ltdc. - Add MIPI DBI compatible SPI driver - Assorted small fixes to tiny panels and bridge drivers. - Add AST2600 support to aspeed. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
2022-03-02drm: Add TODO item for optimizing format helpersThomas Zimmermann1-0/+22
Add a TODO item for optimizing blitting and format-conversion helpers in DRM and fbdev. There's always demand for faster graphics output. v4: * fix typos (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-6-tzimmermann@suse.de
2022-02-28drm/todo: Update panic handling todoDaniel Vetter1-11/+14
Some things changed, and add two useful links. v2: Also include a link to the QR encoding work. Plus review from Javier. v3: Fix typo Guilherme spotted. Reviewed-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: gpiccoli@igalia.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220224132425.3463791-1-daniel.vetter@ffwll.ch
2022-02-25Merge tag 'drm-intel-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie1-0/+1
Linux core: ----------- iosys-map: Add offset to iosys_map_memcpy_to() (Lucas) iosys-map: Add a few more helpers (Lucas) i915 (display and core changes on drm-intel-next): -------------------------------------------------- - Display's DBuf and watermark related fixes and improvements (Ville) - More i915 header and other code clean-up (Jani) - Display IPS fixes and improvements (Ville) - OPRegion fixes and cleanups (Jani) - Fix the plane end Y offset check for FBC (Ville) - DP 128b/132b updates (Jani) - Disable runtime pm wakeref tracking for the mock device selftest (Ville) - Many display code clean-up while targeting to fix up DP DFP 4:2:0 handling (Ville) - Bigjoiner state tracking and more bigjoiner related work (Ville) - Update DMC_DEBUG3 register for DG1 (Chuansheng) - SAGV fixes (Ville) - More GT register cleanup (Matt) - Fix build issue when using clang (Tong) - Display DG2 fixes (Matt) - ADL-P PHY related fixes (Imre) - PSR2 fixes (Jose) - Add PCH Support for Alder Lake N (Tejas) drm-intel-gt-next (drm-intel-gt-next-2022-02-17): ------------------------------------------------- UAPI Changes: - Weak parallel submission support for execlists Minimal implementation of the parallel submission support for execlists backend that was previously only implemented for GuC. Support one sibling non-virtual engine. Core Changes: - Two backmerges of drm/drm-next for header file renames/changes and i915_regs reorganization Driver Changes: - Add new DG2 subplatform: DG2-G12 (Matt R) - Add new DG2 workarounds (Matt R, Ram, Bruce) - Handle pre-programmed WOPCM registers for DG2+ (Daniele) - Update guc shim control programming on XeHP SDV+ (Daniele) - Add RPL-S C0/D0 stepping information (Anusha) - Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas) - Fix KMD and GuC race on accessing PMU busyness (Umesh) - Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh) - Report error on invalid reset notification from GuC (John) - Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston) - Fixes to parallel submission implementation (Matt B.) - Improve GuC loading status check/error reports (John) - Tweak TTM LRU priority hint selection (Matt A.) - Align the plane_vma to min_page_size of stolen mem (Ram) - Introduce vma resources and implement async unbinding (Thomas) - Use struct vma_resource instead of struct vma_snapshot (Thomas) - Return some TTM accel move errors instead of trying memcpy move (Thomas) - Fix a race between vma / object destruction and unbinding (Thomas) - Remove short-term pins from execbuf (Maarten) - Update to GuC version 69.0.3 (John, Michal Wa.) - Improvements to GT reset paths in GuC backend (Matt B.) - Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko) - Use trylock instead of blocking lock when freeing GEM objects (Maarten) - Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.) - Fixes to object unmapping and purging (Matt A) - Check for wedged device in GuC backend (John) - Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten) - Allow dead vm to unbind vma's without lock (Maarten) - s/engine->i915/i915/ for DG2 engine workarounds (Matt R) - Use to_gt() helper for GGTT accesses (Michal Wi.) - Selftest improvements (Matt B., Thomas, Ram) - Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YhbDan8wNZBR6FzF@intel.com
2022-02-23Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-nextRodrigo Vivi7-19/+39
UAPI Changes: - Weak parallel submission support for execlists Minimal implementation of the parallel submission support for execlists backend that was previously only implemented for GuC. Support one sibling non-virtual engine. Core Changes: - Two backmerges of drm/drm-next for header file renames/changes and i915_regs reorganization Driver Changes: - Add new DG2 subplatform: DG2-G12 (Matt R) - Add new DG2 workarounds (Matt R, Ram, Bruce) - Handle pre-programmed WOPCM registers for DG2+ (Daniele) - Update guc shim control programming on XeHP SDV+ (Daniele) - Add RPL-S C0/D0 stepping information (Anusha) - Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas) - Fix KMD and GuC race on accessing PMU busyness (Umesh) - Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh) - Report error on invalid reset notification from GuC (John) - Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston) - Fixes to parallel submission implementation (Matt B.) - Improve GuC loading status check/error reports (John) - Tweak TTM LRU priority hint selection (Matt A.) - Align the plane_vma to min_page_size of stolen mem (Ram) - Introduce vma resources and implement async unbinding (Thomas) - Use struct vma_resource instead of struct vma_snapshot (Thomas) - Return some TTM accel move errors instead of trying memcpy move (Thomas) - Fix a race between vma / object destruction and unbinding (Thomas) - Remove short-term pins from execbuf (Maarten) - Update to GuC version 69.0.3 (John, Michal Wa.) - Improvements to GT reset paths in GuC backend (Matt B.) - Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko) - Use trylock instead of blocking lock when freeing GEM objects (Maarten) - Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.) - Fixes to object unmapping and purging (Matt A) - Check for wedged device in GuC backend (John) - Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten) - Allow dead vm to unbind vma's without lock (Maarten) - s/engine->i915/i915/ for DG2 engine workarounds (Matt R) - Use to_gt() helper for GGTT accesses (Michal Wi.) - Selftest improvements (Matt B., Thomas, Ram) - Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan) From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip rerere cache update")]
2022-02-14Backmerge tag 'v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-nextDave Airlie1-24/+0
Daniel asked for this for some intel deps, so let's do it now. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-11Merge tag 'drm-intel-next-2022-02-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie1-10/+10
Cross-subsystem Changes: ------------------------ dma-buf: - dma-buf-map: Rename to iosys-map (Lucas) Core Changes: ------------- drm: - Always include the debugfs_entry in drm_crtc (Ville) - Add orientation quirk for GPD Win Max (Anisse) Driver Changes: --------------- gvt: - Constify some pointers. (Rikard Falkeborn) - Use list_entry to access list members. (Guenter Roeck) - Fix cmd parser error for Passmark9. (Zhenyu Wang) i915: - Various clean-ups including headers and removing unused and unnecessary stuff\ (Jani, Hans, Andy, Ville) - Cleaning up on our registers definitions i915_reg.h (Matt) - More multi-FBC refactoring (Ville) - Baytrail backlight fix (Hans) - DG1 OPROM read through SPI controller (Clint) - ADL-N platform enabling (Tejas) - Fix slab-out-of-bounds access (Jani) - Add opregion mailbox #5 support for possible EDID override (Anisse) - Fix possible NULL dereferences (Harish) - Updates and fixes around display voltage swing values (Clint, Jose) - Fix RPM wekeref on PXP code (Juston) - Many register definitions clean-up, including planes registers (Ville) - More conversion towards display version over the old gen (Madhumitha, Ville) - DP MST ESI handling improvements (Jani) - drm device based logging conversions (Jani) - Prevent divide by zero (Dan) - Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville) - Async flip optimization for DG2 (Stanislav) - Multiple DSC and bigjoiner fixes and improvements (Ville) - Fix ADL-P TypeC Phy ready status readout (Imre) - Fix up DP DFP 4:2:0 handling more display related fixes (Ville) - Display M/N cleanup (Ville) - Switch to use VGA definitions from video/vga.h (Jani) - Fixes and improvements to abstract CPU architecture (Lucas) - Disable unsused power wells left enabled by BIOS (Imre) - Allow !join_mbus cases for adlp+ dbuf configuration (Ville) - Populate pipe dbuf slices more accurately during readout (Ville) - Workaround broken BIOS DBUF configuration on TGL/RKL (Ville) - Fix trailing semicolon (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
2022-02-07dma-buf-map: Rename to iosys-mapLucas De Marchi1-10/+10
Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-03Merge drm/drm-next into drm-intel-gt-nextJoonas Lahtinen6-19/+38
Backmerge to bring in 5.17-rc2 to introduce a common baseline to merge i915_regs changes from drm-intel-next. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-02-02Revert "fbcon: Disable accelerated scrolling"Helge Deller1-21/+0
This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
2022-02-02Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)"Helge Deller1-8/+5
This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578. Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@gmx.de
2022-02-01Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie6-19/+38
[airlied: add two missing Kconfig] drm-misc-next for v5.18: UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
2022-01-27drm: Add TODO item for requesting memory regionsThomas Zimmermann1-0/+15
Add a TODO item about requesting memory regions for each driver. The current DRM drivers don't do this consistently. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-6-tzimmermann@suse.de
2022-01-21drm: Update docs after moving DisplayPort helpers aroundThomas Zimmermann1-13/+13
DRM's DisplayPort helpers moved into the subdirectory dp/. Change the documentation accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: adb9d5a2cc77 ("drm/dp: Move DisplayPort helpers into separate helper module") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Jani Nikula <jani.nikula@linux.intel.com> Tested-by: Jani Nikula <jani.nikula@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220120113647.22484-1-tzimmermann@suse.de
2022-01-19drm: Provide PCI module-init macrosThomas Zimmermann1-0/+6
Provide helper macros to register PCI-based DRM drivers. The new macros behave like module_pci_driver() with an additional test if DRM modesetting has been enabled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-2-javierm@redhat.com
2022-01-19drm/doc: Fix TTM acronymJosé Expósito1-1/+1
The TTM acronym is defined for the first time in the documentation as "Translation Table Maps". Afterwards, "Translation Table Manager" is used as definition. Fix the first definition to avoid confusion. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220107180230.132666-1-jose.exposito89@gmail.com
2022-01-18Merge drm/drm-next into drm-intel-gt-nextTvrtko Ursulin20-400/+3131
Maarten needs backmerge to account for header file renames/changes which landed via drm-intel-next and are interfering with his pinning work. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-11drm/doc: overview before functions for drm_writeback.cDaniel Vetter1-3/+3
Otherwise it's really hard to link to that, which I realized when I wanted to link to the property definitions for a question on irc. Fix it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: e2d7fc20b3e2 ("drm/writeback: wire drm_writeback.h to kernel-doc") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111202714.1128406-1-daniel.vetter@ffwll.ch
2022-01-11drm/i915/guc: Update to GuC version 69.0.3John Harrison1-0/+1
Update to the latest GuC release. The latest GuC firmware introduces a number of interface changes: GuC may return NO_RESPONSE_RETRY message for requests sent over CTB. Add support for this reply and try resending the request again as a new CTB message. A KLV (key-length-value) mechanism is now used for passing configuration data such as CTB management. With the new KLV scheme, the old CTB management actions are no longer used and are removed. Register capture on hang is now supported by GuC. Full i915 support for this will be added by a later patch. A minimum support of providing capture memory and register lists is required though, so add that in. The device id of the current platform needs to be provided at init time. The 'poll CS' w/a (Wa_22012773006) was blanket enabled by previous versions of GuC. It must now be explicitly requested by the KMD. So, add in the code to turn it on when relevant. The GuC log entry format has changed. This requires adding a new field to the log header structure to mark the wrap point at the end of the buffer (as the buffer size is no longer a multiple of the log entry size). New CTB notification messages are now sent for some things that were previously only sent via MMIO notifications. Of these, the crash dump notification was not really being handled by i915. It called the log flush code but that only flushed the regular debug log and then only if relay logging was enabled. So just report an error message instead. The 'exception' notification was just being ignored completely. So add an error message for that as well. Note that in either the crash dump or the exception case, the GuC is basically dead. The KMD will detect this via the heartbeat and trigger both an error log (which will include the crash dump as part of the GuC log) and a GT reset. So no other processing is really required. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-3-John.C.Harrison@Intel.com
2022-01-09drm/vkms: drop "Multiple overlay planes" TODOJosé Expósito1-2/+0
Remove the task from the TODO list. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220107182809.141003-3-jose.exposito89@gmail.com
2021-12-23Merge tag 'amd-drm-next-5.17-2021-12-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-nextDave Airlie19-400/+3120
amdgpu: - Add some display debugfs entries - RAS fixes - SR-IOV fixes - W=1 fixes - Documentation fixes - IH timestamp fix - Misc power fixes - IP discovery fixes - Large driver documentation updates - Multi-GPU memory use reductions - Misc display fixes and cleanups - Add new SMU debug option amdkfd: - SVM fixes radeon: - Fix typo in comment From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216202731.5900-1-alexander.deucher@amd.com
2021-12-14Documentation/gpu: include description of some of the GC microcontrollersYann Dirson1-0/+35
This is Alex' description from the "Looking for clarifications around gfx/kcq/kiq" thread, edited to fit as ReST. Original text: https://www.spinics.net/lists/amd-gfx/msg71383.html Originally-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yann Dirson <ydirson@free.fr> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14Documentation/gpu: include description of AMDGPU hardware structureYann Dirson2-0/+84
This describes in broad lines the how an AMD GPU is organized, in terms of hardware blocks. This is Alex' description from the "gpu block diagram" thread, edited to fit as ReST. Original text: https://www.spinics.net/lists/amd-gfx/msg71543.html Originally-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yann Dirson <ydirson@free.fr> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13Documentation/gpu: split amdgpu/index for readabilityYann Dirson7-334/+324
This starts to make the formated index much more manageable to the reader. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yann Dirson <ydirson@free.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13Documentation/gpu: Add amdgpu and dc glossaryRodrigo Siqueira4-0/+332
In the DC driver, we have multiple acronyms that are not obvious most of the time; the same idea is valid for amdgpu. This commit introduces a DC and amdgpu glossary in order to make it easier to navigate through our driver. Changes since V3: - Yann: Add new acronyms to amdgpu glossary - Daniel: Add link between dc and amdgpu glossary Changes since V2: - Add MMHUB Changes since V1: - Yann: Divide glossary based on driver context. - Alex: Make terms more consistent and update CPLIB - Add new acronyms to the glossary Reviewed-by: Yann Dirson <ydirson@free.fr> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13Documentation/gpu: Add basic overview of DC pipelineRodrigo Siqueira5-12/+2206
This commit describes how DCN works by providing high-level diagrams with an explanation of each component. In particular, it details the Global Sync signals. Change since V2: - Add a comment about MMHUBBUB. Reviewed-by: Yann Dirson <ydirson@free.fr> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13Documentation/gpu: How to collect DTN logRodrigo Siqueira1-0/+17
Introduce how to collect DTN log from debugfs. Reviewed-by: Yann Dirson <ydirson@free.fr> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13Documentation/gpu: Document pipe split visual confirmationRodrigo Siqueira1-2/+26
Display core provides a feature that makes it easy for users to debug Pipe Split. This commit introduces how to use such a debug option. Reviewed-by: Yann Dirson <ydirson@free.fr> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13Documentation/gpu: Document amdgpu_dm_visual_confirm debugfs entryRodrigo Siqueira1-1/+33
Display core provides a feature that makes it easy for users to debug Multiple planes by enabling a visual notification at the bottom of each plane. This commit introduces how to use such a feature. Reviewed-by: Yann Dirson <ydirson@free.fr> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13Documentation/gpu: Reorganize DC documentationRodrigo Siqueira6-79/+91
Display core documentation is not well organized, and it is hard to find information due to the lack of sections. This commit reorganizes the documentation layout, and it is preparation work for future changes. Changes since V1: - Christian: Group amdgpu documentation together. - Daniel: Drop redundant amdgpu prefix. - Jani: Create index pages. - Yann: Mirror display folder in the documentation. Reviewed-by: Yann Dirson <ydirson@free.fr> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-30drm/vmwgfx: Copy DRM hash-table code into driverThomas Zimmermann1-0/+11
Besides some legacy code, vmwgfx is the only user of DRM's hash- table implementation. Copy the code into the driver, so that the core code can be retired. No functional changes. However, the real solution for vmwgfx is to use Linux' generic hash-table functions. v2: * add TODO item for updating vmwgfx (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211129094841.22499-3-tzimmermann@suse.de
2021-11-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-9/+0
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-11-11drm: Clarify semantics of struct drm_mode_config.{min, max}_{width, height}Thomas Zimmermann1-0/+15
Add additional information on the semantics of the size fields in struct drm_mode_config. Also add a TODO to review all driver for correct usage of these fields. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-10-tzimmermann@suse.de
2021-11-11drm: Update documentation and TODO of gem_prime_mmap hookThomas Zimmermann1-11/+0
The hook gem_prime_mmap in struct drm_driver is deprecated. Document the new requirements. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211108102846.309-4-tzimmermann@suse.de
2021-11-05Merge tag 'drm-misc-next-2021-10-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-5/+8
drm-misc-next for 5.16: UAPI Changes: Cross-subsystem Changes: Core Changes: - fbdev: Fix double-free, Remove unused scrolling acceleration - locking: improve logging for contented locks without backoff - dma-buf: Add dma_resv_for_each_fence iterator, and conversion of users Driver Changes: - nouveau: Various code style improvements - bridge: HPD improvements for lt9611uxc, eDP aux-bus support for ps8640, lvds-codec data-mapping selection support - panels: Vivax TPC-9150, Innolux G070Y2-T02, LOGIC Technologies LTTD800480070-L2RT, Sharp LS060T1SX01, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211014120452.2wicnt6hobu3kbwb@gilmour
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie1-9/+0
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-25Merge drm/drm-next into drm-misc-nextMaxime Ripard4-140/+25
drm-misc-next hasn't been updated in a while and I need a post -rc2 state to merge some vc4 patches. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-10-22Merge tag 'drm-intel-gt-next-2021-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie2-124/+2
UAPI Changes: - Expose multi-LRC submission interface Similar to the bonded submission interface but simplified. Comes with GuC only implementation for now. See kerneldoc for more details. Userspace changes: https://github.com/intel/media-driver/pull/1252 - Expose logical engine instance to user Needed by the multi-LRC submission interface for GuC Userspace changes: https://github.com/intel/media-driver/pull/1252 Driver Changes: - Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh) - Add support for multi-LRC submission in the GuC backend (Matt B) - Add extra cache flushing before making pages userspace visible (Matt A, Thomas) - Mark internal GPU object pages dirty so they will be flushed properly (Matt A) - Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi) - Replace the unconditional clflushes with drm_clflush_virt_range() (Ville) - Remove IS_ACTIVE macro completely (Lucas) - Improve kerneldocs for cache_dirty (Matt A) - Add missing includes (Lucas) - Selftest improvements (Matt R, Ran, Matt A) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
2021-10-15drm/i915/doc: Update parallel submit doc to point to i915_drm.hMatthew Brost2-124/+2
Update parallel submit doc to point to i915_drm.h Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-18-matthew.brost@intel.com
2021-10-14drm: Add privacy-screen class (v4)Hans de Goede1-0/+15
On some new laptops the LCD panel has a builtin electronic privacy-screen. We want to export this functionality as a property on the drm connector object. But often this functionality is not exposed on the GPU but on some other (ACPI) device. This commit adds a privacy-screen class allowing the driver for these other devices to register themselves as a privacy-screen provider; and allowing the drm/kms code to get a privacy-screen provider associated with a specific GPU/connector combo. Changes in v2: - Make CONFIG_DRM_PRIVACY_SCREEN a bool which controls if the drm_privacy code gets built as part of the main drm module rather then making it a tristate which builds its own module. - Add a #if IS_ENABLED(CONFIG_DRM_PRIVACY_SCREEN) check to drm_privacy_screen_consumer.h and define stubs when the check fails. Together these 2 changes fix several dependency issues. - Remove module related code now that this is part of the main drm.ko - Use drm_class as class for the privacy-screen devices instead of adding a separate class for this Changes in v3: - Make the static inline drm_privacy_screen_get_state() stub set sw_state and hw_state to PRIVACY_SCREEN_DISABLED to squelch an uninitialized variable warning when CONFIG_DRM_PRIVICAY_SCREEN is not set Changes in v4: - Make drm_privacy_screen_set_sw_state() skip calling out to the hw if hw_state == new_sw_state Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-3-hdegoede@redhat.com
2021-10-14drm/connector: Add support for privacy-screen properties (v4)Rajat Jain1-0/+2
Add support for generic electronic privacy screen properties, that can be added by systems that have an integrated EPS. Changes in v2 (Hans de Goede) - Create 2 properties, "privacy-screen sw-state" and "privacy-screen hw-state", to deal with devices where the OS might be locked out of making state changes - Write kerneldoc explaining how the 2 properties work together, what happens when changes to the state are made outside of the DRM code's control, etc. Changes in v3 (Hans de Goede) - Some small tweaks to the kerneldoc describing the 2 properties Changes in v4 (Hans de Goede) - Change the "Enabled, locked" and "Disabled, locked" hw-state enum value names to "Enabled-locked" and "Disabled-locked". The xrandr command shows all possible enum values separated by commas in its output, so having a comma in an enum name is not a good idea. - Do not add a privacy_screen_hw_state member to drm_connector_state since this property is immutable its value must be directly stored in the obj->properties->values array Signed-off-by: Rajat Jain <rajatja@google.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-2-hdegoede@redhat.com
2021-10-13fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)Claudio Suarez1-5/+8
Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode = SCROLL_REDRAW. Remove the obsolete code in fbcon.c and fbdev/core/ Signed-off-by: Claudio Suarez <cssk@net-c.es> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YVXTYqszZix9TxjJ@gineta.localdomain
2021-10-11Merge tag 'drm-intel-gt-next-2021-10-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie1-0/+10
UAPI Changes: - Add uAPI for using PXP protected objects Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064 - Add PCI IDs and LMEM discovery/placement uAPI for DG1 Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584 - Disable engine bonding on Gen12+ except TGL, RKL and ADL-S Cross-subsystem Changes: - Merges 'tip/locking/wwmutex' branch (core kernel tip) - "mei: pxp: export pavp client to me client bus" Core Changes: - Update ttm_move_memcpy for async use (Thomas) Driver Changes: - Enable GuC submission by default on DG1 (Matt B) - Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele, Sean, Anshuman) See "drm/i915/pxp: add PXP documentation" for details! - Remove force_probe protection for ADL-S (Raviteja) - Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas) - Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko) - Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris) - Implement LMEM backup and restore for suspend / resume (Thomas) - Report INSTDONE_GEOM values in error state for DG2 (Matt R) - Add DG2-specific shadow register table (Matt R) - Update Gen11/Gen12/XeHP shadow register tables (Matt R) - Maintain backward-compatible nested batch behavior on TGL+ (Matt R) - Add new LRI reg offsets for DG2 (Akeem) - Initialize unused MOCS entries to device specific values (Ayaz) - Track and use the correct UC MOCS index on Gen12 (Ayaz) - Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz) - Simplify the locking and eliminate some RCU usage (Daniel) - Add some flushing for the 64K GTT path (Matt A) - Mark GPU wedging on driver unregister unrecoverable (Janusz) - Major rework in the GuC codebase, simplify locking and add docs (Matt B) - Add DG1 GuC/HuC firmwares (Daniele, Matt B) - Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A) - Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R) - Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel) - Fix early tracepoints for requests (Matt A) - Use locked access to ctx->engines in set_priority (Daniel) - Convert gen6/gen7/gen8 read operations to fwtable (Matt R) - Drop gen11/gen12 specific mmio write handlers (Matt R) - Drop gen11 specific mmio read handlers (Matt R) - Use designated initializers for init/exit table (Kees) - Fix syncmap memory leak (Matt B) - Add pretty printing for buddy allocator state debug (Matt A) - Fix potential error pointer dereference in pinned_context() (Dan) - Remove IS_ACTIVE macro (Lucas) - Static code checker fixes (Nathan) - Clean up disabled warnings (Nathan) - Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B) - Ensure wa_init_finish() is called for ctx workaround list (Matt R) - Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram) - Get PM ref before accessing HW register (Vinay) - Move __i915_gem_free_object to ttm_bo_destroy (Maarten) - Deduplicate frequency dump on debugfs (Lucas) - Make wa list per-gt (Venkata) - Do not define dummy vma in stack (Venkata) - Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas) - Do not report currently active engine when describing objects (Tvrtko) - Fix pdfdocs build error by removing nested grid from GuC docs (Akira) - Remove false warning from the rps worker (Tejas) - Flush buffer pools on driver remove (Janusz) - Fix runtime pm handling in i915_gem_shrink (Maarten) - Rework TTM object initialization slightly (Thomas) - Use fixed offset for PTEs location (Michal Wa) - Verify result from CTB (de)register action and improve error messages (Michal Wa) - Fix bug in user proto-context creation that leaked contexts (Matt B) - Re-use Gen11 forcewake read functions on Gen12 (Matt R) - Make shadow tables range-based (Matt R) - Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten) - Use NULL instead of 0 where appropriate (Ville) - Rename pci/debugfs functions to respect file prefix (Jani, Lucas) - Drop guc_communication_enabled (Daniele) - Selftest fixes (Thomas, Daniel, Matt A, Maarten) - Clean up inconsistent indenting (Colin) - Use direction definition DMA_BIDIRECTIONAL instead of PCI_DMA_BIDIRECTIONAL (Cai) - Add "intel_" as prefix in set_mocs_index() (Ayaz) From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-11Merge tag 'drm-intel-next-2021-10-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie1-14/+11
Cross-subsystem Changes: - fbdev/efifb: Release PCI device's runtime PM ref during FB destr\ oy (Imre) i915 Core Driver Changes: - Only access SFC_DONE in media when not fused off for graphics 12 and newer. - Double Memory latency values from pcode for DG2 (Matt Roper) - ADL-S PCI ID update (Tejas) - New DG1 PCI ID (Jose) - Fix regression with uncore refactoring (Dave) i915 Display Changes: - ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita) - DG2 display fixes (Ankit, Jani) - Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman) - General display simplifications and clean-ups (Jani, Swati, Jose, Ville) - PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong) - Nuke ORIGIN_GTT (Jose) - Return proper DPRX link training result (Lee) - FBC related refactor and fixes (Ville) - Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng) - DP 2.0 preparation work (Jani) - Silence __iomem sparse warn (Ville) - Clean up DPLL stuff (Ville) - Fix various dp/edp max rates (Matt Atwood, Animesh, Jani) - Remove VBT ddi_port_info caching (Jani) - DSI driver improvements (Lee) - HDCP fixes (Juston) - Associate ACPI connector nodes with connector entries (Heikki) - Add support for out-of-bound hotplug events (Hans) - VESA vendor block and drm/i915 MSO use of it (Jani) - Fixes for bigjoiner (Ville) - Update memory bandwidth parameters (RK) - DMC related fixes (Chris, Jose) - HDR related fixes and improvements (Tejas) - g4x/vlv/chv CxSR/wm fixes/cleanups (Ville) - Use BIOS provided value for RKL Audio's HDA link (Kai-Heng) - Fix the dsc check while selecting min_cdclk (Vandita) - Split and constify vtable (Dave) - Add ww context to intel_dpt_pin (Maarten) - Fix bdb version check (Lukasz) - DP per-lane drive settings prep work and other DP fixes (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 05 Oct 2021 04:58:16 AEST # gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown] # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YVtPk6llsxBFiw7W@intel.com
2021-10-11Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie2-17/+12
drm-misc-next for v5.16: UAPI Changes: - Allow empty drm leases for creating separate GEM namespaces. Cross-subsystem Changes: - Slightly rework dma_buf_poll. - Add dma_resv_for_each_fence_unlocked to iterate, and use it inside the lockless dma-resv functions. Core Changes: - Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing. - Add more DP2 headers. - fix CONFIG_FB dependency in fb_helper. - Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888. - Fix crash on a 0 or invalid EDID. Driver Changes: - Apply and revert DRM_MODESET_LOCK_ALL_BEGIN. - Add mode_valid to ti-sn65dsi86 bridge. - Support multiple syncobjs in v3d. - Add R8, RGB332 and RGB888 pixel formats to GUD. - Use devm_add_action_or_reset in dw-hdmi-cec. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
2021-10-08Merge tag 'amd-drm-fixes-5.15-2021-10-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixesDave Airlie1-2/+2
amd-drm-fixes-5.15-2021-10-06: amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com
2021-10-06DRM: delete DRM IRQ legacy midlayer docsRandy Dunlap1-9/+0
Remove documentation associated with the removal of the DRM IRQ legacy midlayer. Eliminates these documentation warnings: ../drivers/gpu/drm/drm_irq.c:1: warning: 'irq helpers' not found ../drivers/gpu/drm/drm_irq.c:1: warning: no structured comments found Fixes: c1736b9008cb ("drm: IRQ midlayer is now legacy") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211005025312.20913-1-rdunlap@infradead.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-05Documentation/gpu: remove spurious "+" in amdgpu.rstAlex Deucher1-2/+2
Not sure why that was there. Remove it. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.