aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2009-12-28rtl8180: remove priv->modeJohn W. Linville2-10/+5
It is only checked in add_interface, and there it is easily replaced with a check of priv->vif. If that information should become necessary, it is available in vif->type anyway. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Cleanup chip handling helper functions.Gertjan van Wingerde9-143/+125
Let each of them take a struct rt2x00_dev pointer as argument instead of a mixture of struct rt2x00_chip and struct rt2x00_dev pointers. Preparation for further clean ups in the rt2x00 chip handling, especially for rt2800 devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: convert RT2800PCI_PCI and RT2800PCI_SOC Kconfig symbols to booleans.Gertjan van Wingerde2-10/+2
There is no need for Kconfig symbols RT2800PCI_PCI and RT2800PCI_SOC to be tristates, as they are only used to check whether RT2800 PCI or SOC support is to be compiled in. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Let rt2800lib check CONFIG_RT2X00_LIB_USB instead of CONFIG_RT2800USBGertjan van Wingerde1-2/+2
rt2800lib currently checks whether RT2800USB is enabled in the configuration. Strictly speaking this is not necessary, it only needs to know whether the generic rt2x00usb library functions are available. Therefore check for RT2X00_LIB_USB instead. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Fix checks for rt2800 SOC support.Gertjan van Wingerde1-9/+9
Fix checking for SOC support in rt2800pci. The wrong config (an unexisting one) was checked. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wireless: remove CONFIG_WIRELESS_OLD_REGULATORYJohn W. Linville4-129/+2
This is no longer needed with the availability of CONFIG_CFG80211_INTERNAL_REGDB. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Prevent performing "join" before associationJuuso Oikarinen1-1/+1
There is a minor bug in the code causing a "join" to be performed before there is an intention to associate. Fix this. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Check vif for NULL when indicating beacon-lossJuuso Oikarinen1-1/+1
Because the interface is started and the vif are created and destroyed separately, there is a slim possibility beacon-loss indications occur while there is no vif - causing a kernel-oops unless checked. Add checking for the vif. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add support for acx_pm_configJuuso Oikarinen5-0/+63
This acx configures host clock parameters in correspondence with the clock request line - the settling time of the clock, and whether fast wake-up is supported. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Change booleans in struct wl1271 into a flags bitmaskJuuso Oikarinen7-64/+55
For cleaner implementation, change the bunch of booleans in the struct wl1271 structure into a flags bitmask. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Fix supported rate managementJuuso Oikarinen6-44/+90
Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Change rates configured for templatesJuuso Oikarinen1-1/+2
Previously a "firmware chooses" value was used for the rates of all control message templates set to the firmware. This resulted in a too high rate to be chosen to transmit those messages. Change this by configuring a fixed low rate for the templates. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add rudimentary ad-hoc supportJuuso Oikarinen1-2/+43
This patch adds rudimentary a-hoc support for the driver. It will allow setting up ad-hoc, and for other devices to scan and join. The beacon and probe response template setting is slightly dirty, and need to be properly implemented with support from mac80211. Also, the SSID is not configured to the firmware - the FW will not be able to respond to probe requests autonomously. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Remove beacon-loss-ind from PSM entry failure handlingJuuso Oikarinen1-1/+0
Remove the beacon-loss indication to stack from PSM entry failure handling - this will cause more problems than it will solve due to the design of the mac80211. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add pre-power-on sleepJuuso Oikarinen2-1/+4
This patch adds a short delay before powering on the wl1271. Normally, it is not needed, but if the wl1271 has been powered off shortly before, for reliable firmware-booting this small stabilization delay is required. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Implement chipset boot retryJuuso Oikarinen1-53/+77
The wl1271 has a hardware bug which causes it to randomly (very infrequently) to fail powering up properly. This patch implements retry for the chipset boot sequence, to work around the hardware problem. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: prevent power save entry while not associatedJuuso Oikarinen2-3/+9
The mac80211 sometimes requests power save entry while not associated - this will cause problems, so prevent it if not associated. Go to powersave once association is complete. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Fix event acknowledging functionalityJuuso Oikarinen3-8/+5
In reference source, events are acknowledged separately - fix the driver to do the same. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Use slow rates for association messagesJuuso Oikarinen4-6/+9
While not associated, default the data rates to 1 and 2mbps, so that only those rates will be used for association related message transfer. Once associated, configure the full rate-set supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Remove smart reflex ACXJuuso Oikarinen5-142/+0
Remove the smart-reflex ACX - the associated parameters are now configured in the radio parameters config. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Configure smart-reflex paramter values.Juuso Oikarinen1-6/+6
Configure correct values to be used with the smart-reflex configuration of the firmware. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: use channel 1 when configuring the data pathLuciano Coelho4-9/+10
In the data path configuration, one of the parameters is the channel. We have been setting it to wl->channel, which is not correct in this case. This channel has nothing to do with the channel we're currently tuned to, since it is only used for calibration during this phase. Hardcoded the channel to 1, according to the reference driver. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: some new configuration values according to new referenceLuciano Coelho2-10/+10
In the new reference driver, some of the firmware configuration values have been changed. This patch changes them in the wl1271 driver accordingly. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: upload only the first 468 bytes from the NVS fileLuciano Coelho2-1/+8
We were uploading the whole NVS file, but that is wrong, because the same file also contains the initialization values. For the latest firmwares, we should upload only the initial 468 bytes from the file. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: add gpio_power file in debugfs to power the chip on and offLuciano Coelho3-0/+61
Some debugging tools require the chip to be powered on before they can work. With these tools, we shouldn't upload the firmware nor boot the firmware ourselves, so this debufs file is provided. It always contains the gpio power setting (0 = off, 1 = on). To change the power setting, just write 0 or 1 to the file. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: fix one typo in the rx_rssi_and_proc_compens valuesLuciano Coelho1-1/+1
There was a typo in one of the values in the rx_rssi_and_proc_compens elemt of the Radio Parameters struct. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: implement dco itrim parameters settingLuciano Coelho5-0/+56
Newer firmwares require the dco itrim parameters to be set during initialization. This patch implements the new ACX function and calls it. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: use the correct macro when setting the basic ratesLuciano Coelho1-1/+1
We were using CONF_TX_RATE_MASK_ALL when calling wl1271_acx_rate_policies() during init. We should use WL1271_DEFAULT_BASIC_RATE_SET instead. The values are the same, but the latter is just the correct macro to use. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: set null data template when BSSID is knownLuciano Coelho1-0/+6
The call to wl1271_cmd_build_null_data() was missing when we got associated, this was causing PS to fail. This patch adds the call and now PS seems to work. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: check result code from the join commandLuciano Coelho1-1/+5
We were not checking the return value from the call to wl1271_cmd_join(). Added a check to make things more reliable. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: limit TX power to 25dBm for every channelLuciano Coelho1-13/+13
The wl1271 firmware supports maximun 25.5dBm, so the driver was returning -EINVALID to anything above that. This patch uses the channel max_power option to limit the TX power to 25dBm. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: remove workaround for disconnectionLuciano Coelho1-15/+0
Now we're using a the idle information coming from mac80211 to decide when to disconnect. If we have joined (ie. we're listening to a channel), whenever the interface goes to idle, we will issue a disconnect command. So the workaround to send a disconnect command before joining is not needed anymore. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: use join command with dummy BSSIDLuciano Coelho1-10/+65
When we need to change the channel before association, we have to send a join command with a valid BSSID. With this patch we use 0baddeadbeef as the BSSID. There are ongoing discussions with TI to get this done in a cleaner way. When we go back to idle, we issue a CMD_DISCONNECT to make sure the firmware stops listening to the channel and cleans things up internally. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: added radio parameters configuration values newer firmwaresLuciano Coelho3-5/+35
Add new radio parameters for new structures based on firmware revision 6.1.0.0.288. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: update radio and general parameters valuesLuciano Coelho1-10/+10
There were some changes in the values we have to use for these settings. This patches updates them. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: updated general parameters structure for newer firmwaresLuciano Coelho4-0/+65
In revision 6.1.0.0.288 the general parameters structure has changed. This patch updates the driver code accordingly. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: updated radio parameters structure for newer firmwaresLuciano Coelho1-4/+12
In revision 6.1.0.0.288 the radio parameters structure has changed. This patch updates the driver code accordingly. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28b43: Allow PIO mode to be selected at module loadLarry Finger6-75/+8
If userencounter the "Fatal DMA Problem" with a BCM43XX device, and still wish to use b43 as the driver, their only option is to rebuild the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and allows PIO mode to be selected with a load-time parameter for the module. Note that the configuration variable CONFIG_B43_PIO is also removed. Once the DMA problem with the BCM4312 devices is solved, this patch will likely be reverted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: remove duplicate local per-vif copy of ieee80211_bss_confLennert Buytenhek1-22/+16
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: remove unused mwl8k_vif::privLennert Buytenhek1-6/+0
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: fix up AP vs. STA firmware image receive descriptor handlingLennert Buytenhek1-64/+60
The receive descriptor ops that are currently marked as being for 8687 only are actually used for all STA firmware images, whereas the receive descriptor ops marked as 8366 are only used on 8366 when an AP firmware image is in use. Rename the receive descriptor ops to reflect this, use the STA ops unconditionally if the firmware image loaded reported the STA ready code, and rename the mwl8k_device_info::rxd_ops member to ap_rxd_ops to indicate that it should only be used if we are running on AP firmware. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: do rx/tx ring initialisation after loading firmwareLennert Buytenhek1-47/+57
Whether the firmware we have loaded is AP or STA firmware decides which receive descriptor format we have to use. Therefore, move rx/tx ring initialisation to be after firmware loading. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: get rid of the struct mwl8k_firmware abstractionLennert Buytenhek1-17/+9
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: add 2.4GHz channels 12, 13 and 14Lennert Buytenhek1-0/+3
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: initialize the mwl8k_info_tbl table using the MWL* enumsLennert Buytenhek1-2/+2
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: inline qos field manipulation functionsLennert Buytenhek1-41/+10
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: get rid of the AMSDU check in the transmit pathLennert Buytenhek1-11/+0
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: hw is never NULL in mwl8k_set_radio_preamble()Lennert Buytenhek1-5/+1
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mwl8k: firmware command code cleanupLennert Buytenhek1-324/+323
Sort firmware commands by command code, get rid of the 802_11 substring in all command names, and make sure that the command functions match the firmware command names. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28iwmc3200wifi: fix array out-of-boundary accessZhu Yi1-1/+1
Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). Cc: stable@kernel.org Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.