| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a new feature defined in section 5 of rfc7829: "Primary Path
Switchover". By introducing a new tunable parameter:
Primary.Switchover.Max.Retrans (PSMR)
The primary path will be changed to another active path when the path
error counter on the old primary path exceeds PSMR, so that "the SCTP
sender is allowed to continue data transmission on a new working path
even when the old primary destination address becomes active again".
This patch is to add this tunable parameter, 'ps_retrans' per netns,
sock, asoc and transport. It also allows a user to change ps_retrans
per netns by sysctl, and ps_retrans per sock/asoc/transport will be
initialized with it.
The check will be done in sctp_do_8_2_transport_strike() when this
feature is enabled.
Note this feature is disabled by initializing 'ps_retrans' per netns
as 0xffff by default, and its value can't be less than 'pf_retrans'
when changing by sysctl.
v3->v4:
- add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of
sysctl 'ps_retrans'.
- add a new entry for ps_retrans on ip-sysctl.txt.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As said in rfc7829, section 3, point 12:
The SCTP stack SHOULD expose the PF state of its destination
addresses to the ULP as well as provide the means to notify the
ULP of state transitions of its destination addresses from
active to PF, and vice versa. However, it is recommended that
an SCTP stack implementing SCTP-PF also allows for the ULP to be
kept ignorant of the PF state of its destinations and the
associated state transitions, thus allowing for retention of the
simpler state transition model of [RFC4960] in the ULP.
Not only does it allow to expose the PF state to ULP, but also
allow to ignore sctp-pf to ULP.
So this patch is to add pf_expose per netns, sock and asoc. And in
sctp_assoc_control_transport(), ulp_notify will be set to false if
asoc->expose is not 'enabled' in next patch.
It also allows a user to change pf_expose per netns by sysctl, and
pf_expose per sock and asoc will be initialized with it.
Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt,
to not allow a user to query the state of a sctp-pf peer address
when pf_expose is 'disabled', as said in section 7.3.
v1->v2:
- Fix a build warning noticed by Nathan Chancellor.
v2->v3:
- set pf_expose to UNUSED by default to keep compatible with old
applications.
v3->v4:
- add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested.
- change this patch to 1/5, and move sctp_assoc_control_transport
change into 2/5, as Marcelo suggested.
- use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and
set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aquantia is now part of Marvell, eventually we'll cease standalone
aquantia.com domain. Thus, change the maintainers file and some other
references to @marvell.com domain
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
atlantic hardware does support UDP hardware segmentation offload.
This allows user to specify one large contiguous buffer with data
which then will be split automagically into multiple UDP packets
of specified size.
Bulk sending of large UDP streams lowers CPU usage and increases
bandwidth.
We did estimations both with udpgso_bench_tx test tool and with modified
iperf3 measurement tool (4 streams, multithread, 200b packet size)
over AQC<->AQC 10G link. Flow control is disabled to prevent RX side
impact on measurements.
No UDP GSO:
iperf3 -c 10.0.1.2 -u -b0 -l 200 -P4 --multithread
UDP GSO:
iperf3 -c 10.0.1.2 -u -b0 -l 12600 --udp-lso 200 -P4 --multithread
Mode CPU iperf speed Line speed Packets per second
-------------------------------------------------------------
NO UDP GSO 350% 3.07 Gbps 3.8 Gbps 1,919,419
SW UDP GSO 200% 5.55 Gbps 6.4 Gbps 3,286,144
HW UDP GSO 90% 6.80 Gbps 8.4 Gbps 4,273,117
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we add a number of ethtool private flags
to allow enabling various loopbacks on HW.
Thats useful for verification and bringup works.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add layer 3 generic packet exception traps that can report trapped
packets and documentation of the traps.
Unlike drop traps, these exception traps also need to inject the packet
to the kernel's receive path. For example, a packet that was trapped due
to unreachable neighbour need to be injected into the kernel so that it
will trigger an ARP request or a neighbour solicitation message.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add packet traps that can report packets that were dropped during layer
3 forwarding.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document the Atheros AR803x PHY bindings.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kalle Valo says:
====================
wireless-drivers-next patches for 5.5
First set of patches for 5.5. The most active driver here clearly is
rtw88, lots of patches for it. More quiet on other drivers, smaller
fixes and cleanups all over.
This pull request also has a trivial conflict, the report and example
resolution here:
https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au
Major changes:
rtw88
* add deep power save support
* add mac80211 software tx queue (wake_tx_queue) support
* enable hardware rate control
* add TX-AMSDU support
* add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support
* add power tracking support
* add 802.11ac beamformee support
* add set_bitrate_mask support
* add phy_info debugfs to show Tx/Rx physical status
* add RFE type 3 support for 8822b
ath10k
* add support for hardware rfkill on devices where firmware supports it
rtl8xxxu
* add bluetooth co-existence support for single antenna
iwlwifi
* Revamp the debugging infrastructure
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TLS TX counter description for the handshake retransmitted
packets that triggers the resync procedure then skip it, going
into the regular transmit flow.
Fixes: 46a3ea98074e ("net/mlx5e: kTLS, Enhance TX resync flow")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The BCM7445/BCM7278 built-in Ethernet switch have an optional reset line
to the SoC's reset controller, describe the 'resets' and 'reset-names'
properties as optional.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add device tree binding doc for the IDT ClockMatrix PTP clock.
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-11-02
The following pull-request contains BPF updates for your *net-next* tree.
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 41 files changed, 1864 insertions(+), 474 deletions(-).
The main changes are:
1) Fix long standing user vs kernel access issue by introducing
bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel.
2) Accelerated xskmap lookup, from Björn and Maciej.
3) Support for automatic map pinning in libbpf, from Toke.
4) Cleanup of BTF-enabled raw tracepoints, from Alexei.
5) Various fixes to libbpf and selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
|
|
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-11-01
This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
documentation.
Lyude Paul fixes an issue where a fatal read error occurs when the
device is unplugged from the machine. So change the read error into a
warn while the device is still present.
Manfred Rudigier found that the i350 device was not apart of the "Media
Auto Sense" feature, yet the device supports it. So add the missing
i350 device to the check and fix an issue where the media auto sense
would flip/flop when no cable was connected to the port causing spurious
kernel log messages.
I fixed an issue where the fix to resolve receive buffer starvation was
applied in more than one place in the driver, one being the incorrect
location in the i40e driver.
Wenwen Wang fixes a potential memory leak in e1000 where allocated
memory is not properly cleaned up in one of the error paths.
Jonathan Neuschäfer cleans up the driver documentation to be consistent
and remove the footnote reference, since the footnote no longer exists in
the documentation.
Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear
it twice.
v2: Fixed alignment issue in patch 3 of the series based on community
feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These asterisks were once references to a line that said:
"* Other names and brands may be claimed as the property of others."
But now, they serve no purpose; they can only irritate the reader.
Fixes: de3edab4276c ("e1000: update README for e1000")
Fixes: a3fb65680f65 ("e100.txt: Cleanup license info in kernel doc")
Fixes: da8c01c4502a ("e1000e.txt: Add e1000e documentation")
Fixes: f12a84a9f650 ("Documentation: fm10k: Add kernel documentation")
Fixes: b55c52b1938c ("igb.txt: Add igb documentation")
Fixes: c4e9b56e2442 ("igbvf.txt: Add igbvf Documentation")
Fixes: d7064f4c192c ("Documentation/networking/: Update Intel wired LAN driver documentation")
Fixes: c4b8c01112a1 ("ixgbevf.txt: Update ixgbevf documentation")
Fixes: 1e06edcc2f22 ("Documentation: i40e: Prepare documentation for RST conversion")
Fixes: 105bf2fe6b32 ("i40evf: add driver to kernel build system")
Fixes: 1fae869bcf3d ("Documentation: ice: Prepare documentation for RST conversion")
Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Pull arm64 fixes from Will Deacon:
"These are almost exclusively related to CPU errata in CPUs from
Broadcom and Qualcomm where the workarounds were either not being
enabled when they should have been or enabled when they shouldn't have
been.
The only "interesting" fix is ensuring that writeable, shared mappings
are initially mapped as clean since we inadvertently broke the logic
back in v4.14 and then noticed the problem via code inspection the
other day.
The only critical issue we have outstanding is a sporadic NULL
dereference in the scheduler, which doesn't appear to be
arm64-specific and PeterZ is tearing his hair out over it at the
moment.
Summary:
- Enable CPU errata workarounds for Broadcom Brahma-B53
- Enable CPU errata workarounds for Qualcomm Hydra/Kryo CPUs
- Fix initial dirty status of writeable, shared mappings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
arm64: Brahma-B53 is SSB and spectre v2 safe
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
arm64: cpufeature: Enable Qualcomm Falkor/Kryo errata 1003
arm64: Ensure VM_WRITE|VM_SHARED ptes are clean by default
|
|
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_843419 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_843419 into an erratum list and use
cpucap_multi_entry_cap_matches to match our entries.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_845719 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_845719 into an erratum list.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add documentation file for the MAC/PHY support in the DPAA2
architecture. This describes the architecture and implementation of the
interface between phylink and a DPAA2 network driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_max_syn_backlog default value depends on memory size
and TCP ehash size. Before this patch, the max value
was 2048 [1], which is considered too small nowadays.
Increase it to 4096 to match the recent SOMAXCONN change.
[1] This is with TCP ehash size being capped to 524288 buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SOMAXCONN is /proc/sys/net/core/somaxconn default value.
It has been defined as 128 more than 20 years ago.
Since it caps the listen() backlog values, the very small value has
caused numerous problems over the years, and many people had
to raise it on their hosts after beeing hit by problems.
Google has been using 1024 for at least 15 years, and we increased
this to 4096 after TCP listener rework has been completed, more than
4 years ago. We got no complain of this change breaking any
legacy application.
Many applications indeed setup a TCP listener with listen(fd, -1);
meaning they let the system select the backlog.
Raising SOMAXCONN lowers chance of the port being unavailable under
even small SYNFLOOD attack, and reduces possibilities of side channel
vulnerabilities.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Kryo cores share errata 1009 with Falkor, so add their model
definitions and enable it for them as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[will: Update entry in silicon-errata.rst]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This commits adds a document that explains how to test BPF in an s390
QEMU guest.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191029172916.36528-1-iii@linux.ibm.com
|
|
This adds documentation about the uart phy to the pn532 binding doc. As
the filename "pn533-i2c.txt" is not appropriate any more, rename it to
the more general "pn532.txt".
This also documents the deprecation of the compatible strings ending
with "...-i2c".
Cc: Johan Hovold <johan@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sync the ABI description with the interface statistics that are currently
available through sysfs.
CC: Jarod Wilson <jarod@redhat.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: linux-doc@vger.kernel.org
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the marvell switches have bits controlling the hash algorithm
the ATU uses for MAC addresses. In some industrial settings, where all
the devices are from the same manufacture, and hence use the same OUI,
the default hashing algorithm is not optimal. Allow the other
algorithms to be selected via devlink.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc
no-watchdog regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA),
Allwinner (phy regulators, PMU removal on A64, etc)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
MAINTAINERS: Update the Spreadtrum SoC maintainer
MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
bus: ti-sysc: Fix watchdog quirk handling
ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
mailmap: Add Simon Arlott (replacement for expired email address)
arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
...
|
|
Pull Devicetree fixes from Rob Herring:
"A couple more DT fixes for 5.4: fix a ref count, memory leak, and
Risc-V cpu schema warnings"
* tag 'devicetree-fixes-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: reserved_mem: add missing of_node_put() for proper ref-counting
of: unittest: fix memory leak in unittest_data_add
dt-bindings: riscv: Fix CPU schema errors
|
|
Fix the errors in the RiscV CPU DT schema:
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@1: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible:0: 'riscv' is not one of ['sifive,rocket0', 'sifive,e5', 'sifive,e51', 'sifive,u54-mc', 'sifive,u54', 'sifive,u5']
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible: ['riscv'] is too short
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property
The DT spec allows for 'timebase-frequency' to be in 'cpu' or 'cpus' node
and RiscV requires it in /cpus node, so make it disallowed in cpu
nodes.
Fixes: 4fd669a8c487 ("dt-bindings: riscv: convert cpu binding to json-schema")
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull regulator fixes from Mark Brown:
"There are a few core fixes here around error handling and handling if
suspend mode configuration and some driver specific fixes here but the
most important change is the fix to the fixed-regulator DT schema
conversion introduced during the last merge window.
That fixes one of the last two errors preventing successful execution
of "make dt_binding_check" which will be enormously helpful for DT
schema development"
* tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom-rpmh: Fix PMIC5 BoB min voltage
regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized
regulator: lochnagar: Add on_off_delay for VDDCORE
regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone
regulator: da9062: fix suspend_enable/disable preparation
dt-bindings: fixed-regulator: fix compatible enum
regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF
regulator: core: make regulator_register() EPROBE_DEFER aware
regulator: of: fix suspend-min/max-voltage parsing
|
|
Added sections on all the bind flags, libbpf, all the setsockopts and
all the getsockopts. Also updated the document to reflect the latest
features and to correct some spelling errors.
v1 -> v2:
* Updated XDP program with latest BTF map format
* Added one more FAQ entry
* Some minor edits and corrections
v2 -> v3:
* Simplified XDP_SHARED_UMEM example XDP program
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1571648224-16889-1-git-send-email-magnus.karlsson@intel.com
|
|
A number of fixes for this release, but mostly:
- A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window
- A fix for a dt-binding error
- Addition of phy regulator delays
- The PMU on the A64 was found to be non-functional, so we've dropped it for now
* tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun7i: Drop the module clock from the device tree
dt-bindings: media: sun4i-csi: Drop the module clock
media: dt-bindings: Fix building error for dt_binding_check
arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay
arm64: dts: allwinner: a64: Drop PMU node
arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay
Link: https://lore.kernel.org/r/80085a57-c40f-4bed-a9c3-19858d87564e.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull pin control fixes from Linus Walleij:
"Here is a bunch of pin control fixes. I was lagging behind on this
one, some fixes should have come in earlier, sorry about that.
Anyways here it is, pretty straight-forward fixes, the Strago fix
stand out as something serious affecting a lot of machines.
Summary:
- Handle multiple instances of Intel chips without complaining.
- Restore the Intel Strago DMI workaround
- Make the Armada 37xx handle pins over 32
- Fix the polarity of the LED group on Armada 37xx
- Fix an off-by-one bug in the NS2 driver
- Fix error path for iproc's platform_get_irq()
- Fix error path on the STMFX driver
- Fix a typo in the Berlin AS370 driver
- Fix up misc errors in the Aspeed 2600 BMC support
- Fix a stray SPDX tag"
* tag 'pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups
pinctrl: aspeed-g6: Fix UART13 group pinmux
pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively
pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration
pinctrl: aspeed-g6: Fix I2C14 SDA description
pinctrl: aspeed-g6: Sort pins for sanity
dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups
pinctrl: berlin: as370: fix a typo s/spififib/spdifib
pinctrl: armada-37xx: swap polarity on LED group
pinctrl: stmfx: fix null pointer on remove
pinctrl: iproc: allow for error from platform_get_irq()
pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable()
pinctrl: bcm-iproc: Use SPDX header
pinctrl: armada-37xx: fix control of pins 32 and up
pinctrl: cherryview: restore Strago DMI workaround for all versions
pinctrl: intel: Allocate IRQ chip dynamic
|
|
Several cases of overlapping changes which were for the most
part trivially resolvable.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull irq fixes from Thomas Gleixner:
"A small set of irq chip driver fixes and updates:
- Update the SIFIVE PLIC interrupt driver to use the fasteoi handler
to address the shortcomings of the existing flow handling which was
prone to lose interrupts
- Use the proper limit for GIC interrupt line numbers
- Add retrigger support for the recently merged Anapurna Labs Fabric
interrupt controller to make it complete
- Enable the ATMEL AIC5 interrupt controller driver on the new
SAM9X60 SoC"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Switch to fasteoi flow
irqchip/gic-v3: Fix GIC_LINE_NR accessor
irqchip/atmel-aic5: Add support for sam9x60 irqchip
irqchip/al-fic: Add support for irq retrigger
|
|
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
|
|
The Ethernet controller is also an mdio controller, to be able to parse
children (phys for example), and mdio node must be present.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull arm64 fixes from Will Deacon:
"The main thing here is a long-awaited workaround for a CPU erratum on
ThunderX2 which we have developed in conjunction with engineers from
Cavium/Marvell.
At the moment, the workaround is unconditionally enabled for affected
CPUs at runtime but we may add a command-line option to disable it in
future if performance numbers show up indicating a significant cost
for real workloads.
Summary:
- Work around Cavium/Marvell ThunderX2 erratum #219
- Fix regression in mlock() ABI caused by sign-extension of TTBR1 addresses
- More fixes to the spurious kernel fault detection logic
- Fix pathological preemption race when enabling some CPU features at boot
- Drop broken kcore macros in favour of generic implementations
- Fix userspace view of ID_AA64ZFR0_EL1 when SVE is disabled
- Avoid NULL dereference on allocation failure during hibernation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tags: Preserve tags for addresses translated via TTBR1
arm64: mm: fix inverted PAR_EL1.F check
arm64: sysreg: fix incorrect definition of SYS_PAR_EL1_F
arm64: entry.S: Do not preempt from IRQ before all cpufeatures are enabled
arm64: hibernate: check pgd table allocation
arm64: cpufeature: Treat ID_AA64ZFR0_EL1 as RAZ when SVE is not enabled
arm64: Fix kcore macros after 52-bit virtual addressing fallout
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
|
|
Workaround for Cavium/Marvell ThunderX2 erratum #219.
* errata/tx2-219:
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
|
|
Rename SD3 functions and groups to EMMC to better reflect their intended
use before the binding escapes too far into the wild. Also clean up the
SD3 pin groups to eliminate some silliness that slipped through the
cracks (SD3DAT[4-7]) by unifying them into three new groups: EMMCG1,
EMMCG4 and EMMCG8 for 1, 4 and 8-bit data buses respectively.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191008044153.12734-2-andrew@aj.id.au
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Commit 8974558f49a6 ("mm, page_owner, debug_pagealloc: save and dump
freeing stack trace") enhanced page_owner to also store freeing stack
trace, when debug_pagealloc is also enabled. KASAN would also like to
do this [1] to improve error reports to debug e.g. UAF issues.
Kirill has suggested that the freeing stack trace saving should be also
possible to be enabled separately from KASAN or debug_pagealloc, i.e.
with an extra boot option. Qian argued that we have enough options
already, and avoiding the extra overhead is not worth the complications
in the case of a debugging option. Kirill noted that the extra stack
handle in struct page_owner requires 0.1% of memory.
This patch therefore enables free stack saving whenever page_owner is
enabled, regardless of whether debug_pagealloc or KASAN is also enabled.
KASAN kernels booted with page_owner=on will thus benefit from the
improved error reports.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=203967
[vbabka@suse.cz: v3]
Link: http://lkml.kernel.org/r/20191007091808.7096-3-vbabka@suse.cz
Link: http://lkml.kernel.org/r/20190930122916.14969-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Qian Cai <cai@lca.pw>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull irqchip fixes from Marc Zyngier:
- Add retrigger support to Amazon's al-fic driver
- Add SAM9X60 support to Atmel's AIC5 irqchip
- Fix GICv3 maximum interrupt calculation
- Convert SiFive's PLIC to the fasteoi IRQ flow
|
|
Pull hwmon fixes from Guenter Roeck:
- Update/fix inspur-ipsps1 and k10temp Documentation
- Fix nct7904 driver
- Fix HWMON_P_MIN_ALARM mask in hwmon core
* tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: docs: Extend inspur-ipsps1 title underline
hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct.
docs: hwmon: Include 'inspur-ipsps1.rst' into docs
hwmon: Fix HWMON_P_MIN_ALARM mask
hwmon: (k10temp) Update documentation and add temp2_input info
hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
|
|
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.4-rc3 that
resolve a number of reported issues and regressions.
None of these are huge, full details are in the shortlog. There's also
a MAINTAINERS update that I think you might have already taken in your
tree already, but git should handle that merge easily.
All have been in linux-next with no reported issues"
* tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
tty: serial: imx: Use platform_get_irq_optional() for optional IRQs
serial: fix kernel-doc warning in comments
serial: 8250_omap: Fix gpio check for auto RTS/CTS
serial: mctrl_gpio: Check for NULL pointer
tty: serial: fsl_lpuart: Fix lpuart_flush_buffer()
tty: serial: Fix PORT_LINFLEXUART definition
tty: n_hdlc: fix build on SPARC
serial: uartps: Fix uartps_major handling
serial: uartlite: fix exit path null pointer
tty: serial: linflexuart: Fix magic SysRq handling
serial: sh-sci: Use platform_get_irq_optional() for optional interrupts
dt-bindings: serial: sh-sci: Document r8a774b1 bindings
serial/sifive: select SERIAL_EARLYCON
tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'
tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
|
|
Pull USB fixes from Greg KH:
"Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for
years as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues"
* tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
USB: yurex: fix NULL-derefs on disconnect
USB: iowarrior: use pr_err()
USB: iowarrior: drop redundant iowarrior mutex
USB: iowarrior: drop redundant disconnect mutex
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: chaoskey: fix use-after-free on release
USB: adutux: fix use-after-free on release
USB: ldusb: fix NULL-derefs on driver unbind
USB: legousbtower: fix use-after-free on release
usb: cdns3: Fix for incorrect DMA mask.
usb: cdns3: fix cdns3_core_init_role()
usb: cdns3: gadget: Fix full-speed mode
USB: usb-skeleton: drop redundant in-urb check
USB: usb-skeleton: fix use-after-free after driver unbind
USB: usb-skeleton: fix NULL-deref on disconnect
usb:cdns3: Fix for CV CH9 running with g_zero driver.
usb: dwc3: Remove dev_err() on platform_get_irq() failure
usb: dwc3: Switch to platform_get_irq_byname_optional()
...
|
David S. Miller
Xin Long
Igor Russkikh
Amit Cohen
Michael Walle
Tariq Toukan
Florian Fainelli
Vincent Cheng
Linus Torvalds
Jonathan Neuschäfer
Doug Berger
Ioana Ciornei
Eric Dumazet
Bjorn Andersson
Ilya Leoshkevich
Lars Poeschel
Julian Wiedmann
Andrew Lunn
Rob Herring
Magnus Karlsson
Olof Johansson
Alexandre Belloni
Will Deacon
Andrew Jeffery
Vlastimil Babka
Thomas Gleixner