| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull RTC updates from Alexandre Belloni:
"Setting the supported range from drivers for RTCs failing soon has
started. A few fixes are developed along the way. Some drivers have
been switched to SPDX by their maintainers.
Subsystem:
- rework of the rtc-test driver which allows to test the core more
thoroughly
- rtc_set_alarm() now fails early when alarms are not supported
Drivers:
- mktime() is now replaced by mktime64()
- RTC range added for 88pm80x, ab-b5ze-s3, at91rm9200,
brcmstb-waketimer, ds1685, ftrtc010, ls1x, mxc_v2, rx8581, sprd,
st-lpc, tps6586x, tps65910 and vr41xx
- fixed a possible race condition in probe functions
- pxa: fix the probe function that is broken since v4.3
- stm32: now supports stm32mp1"
* tag 'rtc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (78 commits)
rtc: pxa: fix probe function
rtc: cros-ec: Switch to SPDX identifier.
rtc: cros-ec: Make license text and module license match.
rtc: ensure rtc_set_alarm fails when alarms are not supported
rtc: test: remove alarm support from the first device
rtc: test: convert to devm_rtc_allocate_device
rtc: ftrtc010: let the core handle range
rtc: ftrtc010: handle dates after 2106
rtc: ftrtc010: switch to devm_rtc_allocate_device
rtc: mrst: switch to devm functions
rtc: sunxi: fix possible race condition
rtc: test: remove irq sysfs file
rtc: test: emulate alarms using timers
rtc: test: store time as an offset to system time
rtc: test: allow registering many devices
rtc: test: remove useless proc info
rtc: ds1685: Add range
rtc: ds1685: fix possible race condition
rtc: sprd: Add new RTC power down check method
rtc: sun6i: Fix bit_idx value for clk_register_gate
...
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx.
In the absence of Nic, we're also taking target updates which are
mostly minor except for the tcmu refactor.
The only real core change to worry about is the removal of high page
bouncing (in sas, storvsc and iscsi). This has been well tested and no
problems have shown up so far"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
scsi: lpfc: update driver version to 12.0.0.4
scsi: lpfc: Fix port initialization failure.
scsi: lpfc: Fix 16gb hbas failing cq create.
scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
scsi: lpfc: correct oversubscription of nvme io requests for an adapter
scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
scsi: hisi_sas: Mark PHY as in reset for nexus reset
scsi: hisi_sas: Fix return value when get_free_slot() failed
scsi: hisi_sas: Terminate STP reject quickly for v2 hw
scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
scsi: hisi_sas: Try wait commands before before controller reset
scsi: hisi_sas: Init disks after controller reset
scsi: hisi_sas: Create a scsi_host_template per HW module
scsi: hisi_sas: Reset disks when discovered
scsi: hisi_sas: Add LED feature for v3 hw
scsi: hisi_sas: Change common allocation mode of device id
scsi: hisi_sas: change slot index allocation mode
scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
...
|
|
Pull power supply and reset updates from Sebastian Reichel:
- bq27xxx: Add BQ27426 support
- ab8500: Drop AB8540/9540 support
- Introduced new usb_type property
- Properly document the power-supply ABI
- misc. cleanups and fixes
* tag 'for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
MAINTAINERS: add entry for LEGO MINDSTORMS EV3
power: supply: ab8500_charger: fix spelling mistake: "faile" -> "failed"
power: supply: axp288_fuel_gauge: Remove polling from the driver
power: supply: axp288_fuelguage: Do not bind when the fg function is not used
power: supply: axp288_charger: Do not bind when the charge function is not used
power: supply: axp288_charger: Support 3500 and 4000 mA input current limit
power: supply: s3c-adc-battery: fix driver data initialization
power: supply: charger-manager: Verify polling interval only when polling requested
power: supply: sysfs: Use enum to specify property
power: supply: ab8500: Drop AB8540/9540 support
power: supply: ab8500_fg: fix spelling mistake: "Disharge" -> "Discharge"
power: supply: simplify getting .drvdata
power: supply: bq27xxx: Add support for BQ27426
gpio-poweroff: Use gpiod_set_value_cansleep
|
|
Pull clk updates from Stephen Boyd:
"This time we have a good set of changes to the core framework that do
some general cleanups, but nothing too major. The majority of the diff
goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
introduced for Actions Semi so it takes up some lines to add all the
different types, and the Qualcomm diff is there because we add support
for two SoCs and it's quite a bit of data.
Otherwise the big driver updates are on TI Davinci and Amlogic
platforms. And then the long tail of driver updates for various fixes
and stuff follows after that.
Core:
- debugfs cleanups removing error checking and an unused provider API
- Removal of a clk init typedef that isn't used
- Usage of match_string() to simplify parent string name matching
- OF clk helpers moved to their own file (linux/of_clk.h)
- Make clk warnings more readable across kernel versions
New Drivers:
- Qualcomm SDM845 GCC and Video clk controllers
- Qualcomm MSM8998 GCC
- Actions Semi S900 SoC support
- Nuvoton npcm750 microcontroller clks
- Amlogic axg AO clock controller
Removed Drivers:
- Deprecated Rockchip clk-gate driver
Updates:
- debugfs functions stopped checking return values
- Support for the MSIOF module clocks on Rensas R-Car M3-N
- Support for the new Rensas RZ/G1C and R-Car E3 SoCs
- Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
- Berlin and Amlogic SPDX tagging
- Usage of of_clk_get_parent_count() in more places
- Proper implementation of the CDEV1/2 clocks on Tegra20
- Allwinner H6 PRCM clock support and R40 EMAC support
- Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
- Round closest support for meson's mpll driver
- Support for meson8b nand clocks and gxbb video decoder clocks
- Mediatek mali clks
- STM32MP1 fixes
- Uniphier LD11/LD20 stream demux system clock"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
clk: qcom: Export clk_fabia_pll_configure()
clk: bcm: Update and add Stingray clock entries
dt-bindings: clk: Update Stingray binding doc
clk-si544: Properly round requested frequency to nearest match
clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
clk: ingenic: jz4770: Change OTG from custom to standard gated clock
clk: ingenic: Support specifying "wait for clock stable" delay
clk: ingenic: Add support for clocks whose gate bit is inverted
clk: use match_string() helper
clk: bcm2835: use match_string() helper
clk: Return void from debug_init op
clk: remove clk_debugfs_add_file()
clk: tegra: no need to check return value of debugfs_create functions
clk: davinci: no need to check return value of debugfs_create functions
clk: bcm2835: no need to check return value of debugfs_create functions
clk: no need to check return value of debugfs_create functions
clk: imx6: add EPIT clock support
clk: mvebu: use correct bit for 98DX3236 NAND
...
|
|
Pull staging/IIO updates from Greg KH:
"Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog has
the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about this
code since it moved to staging last year, and if it needs to come
back, it can be reverted.
- lustre file system is removed.
I've ranted at the lustre developers about once a year for the past
5 years, with no real forward progress at all to clean things up
and get the code into the "real" part of the kernel.
Given that the lustre developers continue to work on an external
tree and try to port those changes to the in-kernel tree every once
in a while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the time
working in their out-of-tree location and get things cleaned up
properly to get merged into the tree correctly at a later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems"
* tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits)
staging: ipx: delete it from the tree
ncpfs: remove uapi .h files
ncpfs: remove Documentation
ncpfs: remove compat functionality
staging: ncpfs: delete it
staging: lustre: delete the filesystem from the tree.
staging: vc04_services: no need to save the log debufs dentries
staging: vc04_services: vchiq_debugfs_log_entry can be a void *
staging: vc04_services: remove struct vchiq_debugfs_info
staging: vc04_services: move client dbg directory into static variable
staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
staging: vc04_services: no need to check debugfs return values
staging: mt7621-gpio: reorder includes alphabetically
staging: mt7621-gpio: change gc_map to don't use pointers
staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
staging: mt7621-gpio: update #interrupt-cells for the gpio node
staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
staging: mt7621-dts: add missing properties to gpio node
...
|
|
Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
|
|
Pull regulator updates from Mark Brown:
"Quite a lot of core work this time around, though not 100% successful.
We gained support for runtime mode changes thanks to David Collins and
improved support for write only regulators (ones where we can't read
back the configuration) from Douglas Anderson.
There's been quite a bit of work from Linus Walleij on converting from
specfying GPIOs by numbers to descriptors. Sadly the testing turned
out to be less good than we had hoped and so a lot of this had to be
reverted.
We also have the start of updates to use coupled regulators from
Maciej Purski, unfortunately there are further problems there so the
last couple of patches have been reverted.
We also have new drivers for BD71837 and SY8106A devices, SAW
regulators on Qualcomm SPMI and dropped support for some preproduction
chips that never made it to market from the AB8500 driver"
* tag 'regulator-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (57 commits)
regulator: gpio: Revert
ARM: pxa, regulator: fix building ezx e680
regulator: Revert coupled regulator support again
regulator: wm8994: Fix shared GPIOs
regulator: max77686: Fix shared GPIOs
regulator: bd71837: BD71837 PMIC regulator driver
regulator: bd71837: Devicetree bindings for BD71837 regulators
regulator: gpio: Get enable GPIO using GPIO descriptor
regulator: fixed: Convert to use GPIO descriptor only
regulator: s2mps11: Fix boot on Odroid XU3
dt-bindings: qcom_spmi: Document SAW support
regulator: qcom_spmi: Add support for SAW
regulator: tps65090: Pass descriptor instead of GPIO number
regulator: s5m8767: Pass descriptor instead of GPIO number
regulator: pfuze100: Delete reference to ena_gpio
regulator: max8952: Pass descriptor instead of GPIO number
regulator: lp8788-ldo: Pass descriptor instead of GPIO number
regulator: lm363x: Pass descriptor instead of GPIO number
regulator: max8973: Pass descriptor instead of GPIO number
regulator: mc13xxx-core: Switch to SPDX identifier
...
|
|
Pull arm64 updates from Catalin Marinas:
"Apart from the core arm64 and perf changes, the Spectre v4 mitigation
touches the arm KVM code and the ACPI PPTT support touches drivers/
(acpi and cacheinfo). I should have the maintainers' acks in place.
Summary:
- Spectre v4 mitigation (Speculative Store Bypass Disable) support
for arm64 using SMC firmware call to set a hardware chicken bit
- ACPI PPTT (Processor Properties Topology Table) parsing support and
enable the feature for arm64
- Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
primary motivation is Scalable Vector Extensions which requires
more space on the signal frame than the currently defined
MINSIGSTKSZ
- ARM perf patches: allow building arm-cci as module, demote
dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous
cleanups
- cmpwait() WFE optimisation to avoid some spurious wakeups
- L1_CACHE_BYTES reverted back to 64 (for performance reasons that
have to do with some network allocations) while keeping
ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual
hardware Cache Writeback Granule
- Turn LSE atomics on by default in Kconfig
- Kernel fault reporting tidying
- Some #include and miscellaneous cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits)
arm64: Fix syscall restarting around signal suppressed by tracer
arm64: topology: Avoid checking numa mask for scheduler MC selection
ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled
arm64: cpu_errata: include required headers
arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
arm64: signal: Report signal frame size to userspace via auxv
arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
arm64: KVM: Add HYP per-cpu accessors
arm64: ssbd: Add prctl interface for per-thread mitigation
arm64: ssbd: Introduce thread flag to control userspace mitigation
arm64: ssbd: Restore mitigation status on CPU resume
arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
arm64: ssbd: Add global mitigation state accessor
arm64: Add 'ssbd' command-line option
arm64: Add ARCH_WORKAROUND_2 probing
arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
...
|
|
Pull dmaengine updates from Vinod Koul:
- updates to sprd, bam_dma, stm drivers
- remove VLAs in dmatest
- move TI drivers to their own subdir
- switch to SPDX tags for ima/mxs dma drivers
- simplify getting .drvdata on bunch of drivers by Wolfram Sang
* tag 'dmaengine-4.18-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (32 commits)
dmaengine: sprd: Add Spreadtrum DMA configuration
dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()
dmaengine: imx-dma: Switch to SPDX identifier
dmaengine: mxs-dma: Switch to SPDX identifier
dmaengine: imx-sdma: Switch to SPDX identifier
dmaengine: usb-dmac: Document R8A7799{0,5} bindings
dmaengine: qcom: bam_dma: fix some doc warnings.
dmaengine: qcom: bam_dma: fix invalid assignment warning
dmaengine: sprd: fix an NULL vs IS_ERR() bug
dmaengine: sprd: Use devm_ioremap_resource() to map memory
dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
dmaengine: pl330: flush before wait, and add dev burst support.
dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
dmaengine: stm32-mdma: fix spelling mistake: "avalaible" -> "available"
dmaengine: rcar-dmac: Document R-Car D3 bindings
dmaengine: sprd: Move DMA request mode and interrupt type into head file
dmaengine: sprd: Define the DMA data width type
dmaengine: sprd: Define the DMA transfer step type
dmaengine: ti: New directory for Texas Instruments DMA drivers
dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS
...
|
|
Pull MTD updates from Boris Brezillon:
"Core changes:
- Add a sysfs attribute to expose available OOB size
Driver changes:
- Remove HAS_DMA dependency on various drivers
- Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
- Replace msleep by usleep_range() in the dataflash driver
- Avoid VLA usage in nftl layers
- Remove useless .owner assignment in pismo
- Fix various issues in the CFI driver
- Improve TRX partition handling expose a DT compat for this part
parser
- Clarify OFFSET_CONTINUOUS meaning
NAND core changes:
- Add Miquel as a NAND maintainer
- Add access mode to the nand_page_io_req struct
- Fix kernel-doc in rawnand.h
- Support bit-wise majority to recover from corrupted ONFI parameter
pages
- Stop checking FAIL bit after a SET_FEATURES, as documented in the
ONFI spec
Raw NAND Driver changes:
- Fix and cleanup the error path of many NAND controller drivers
- GPMI:
+ Cleanup/simplification of a few aspects in the driver
+ Take ECC setup specified in the DT into account
- sunxi: remove support for GPIO-based R/B polling
- MTK:
+ Use of_device_get_match_data() instead of of_match_device()
+ Add an entry in MAINTAINERS for this driver
+ Fix nand-ecc-step-size and nand-ecc-strength description in the
DT bindings doc
- fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page
OneNAND driver changes:
- samsung: use dev_get_drvdata() instead of platform_get_drvdata()
SPI NOR core changes:
- Add support for a bunch of SPI NOR chips
- Clear EAR reg when switching to 3-byte addressing mode on Winbond
chips
SPI NOR controller driver changes:
- cadence: Add DMA support for direct mode reads
- hisi: Prefix a few functions with hisi_
- intel:
+ Mark the driver as "dangerous" in Kconfig
+ Fix atomic sequence handling
+ Pass a 40us delay (instead of 0us) to readl_poll_timeout()
- fsl:
+ fix a typo in a function name
+ add support for IP variants embedded in the ls2080a and ls1080a
SoCs
- stm32: request exclusive control of the reset line"
* tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits)
mtd: nand: Pass mode information to nand_page_io_req
mtd: cfi_cmdset_0002: Change erase one block to enable XIP once
mtd: cfi_cmdset_0002: Change erase functions to check chip good only
mtd: cfi_cmdset_0002: Change erase functions to retry for error
mtd: cfi_cmdset_0002: Change definition naming to retry write operation
mtd: cfi_cmdset_0002: Change write buffer to check correct value
mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS
mtd: bcm47xxpart: add of_match_table with a new DT binding
dt-bindings: mtd: document Broadcom's BCM47xx partitions
mtd: spi-nor: Add support for EN25QH32
mtd: spi-nor: Add support for is25wp series chips
mtd: spi-nor: Add Winbond w25q32jv support
mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a
mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control
mtd: spi-nor: intel: provide a range for poll_timout
mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read
mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig
mtd: spi-nor: intel-spi: Fix atomic sequence handling
mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op
mtd: rawnand: use bit-wise majority to recover the ONFI param page
...
|
|
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.18 development cycle.
Core changes:
- We have killed off VLA from the core library and all drivers.
The background should be clear for everyone at this point:
https://lwn.net/Articles/749064/
Also I just don't like VLA's, kernel developers hate it when
compilers do things behind their back. It's as simple as that.
I'm sorry that they even slipped in to begin with. Kudos to Laura
Abbott for exorcising them.
- Support GPIO hogs in machines/board files.
New drivers and chip support:
- R-Car r8a77470 (RZ/G1C)
- R-Car r8a77965 (M3-N)
- R-Car r8a77990 (E3)
- PCA953x driver improvements to accomodate more variants.
Improvements and new features:
- Support one interrupt per line on port A in the DesignWare dwapb
driver.
Misc:
- Random cleanups, right header files in the drivers, some size
optimizations etc"
* tag 'gpio-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
gpio: davinci: fix build warning when !CONFIG_OF
gpio: dwapb: Fix rework support for 1 interrupt per port A GPIO
gpio: pxa: Include the right header
gpio: pl061: Include the right header
gpio: pch: Include the right header
gpio: pcf857x: Include the right header
gpio: pca953x: Include the right header
gpio: palmas: Include the right header
gpio: omap: Include the right header
gpio: octeon: Include the right header
gpio: mxs: Switch to SPDX identifier
gpio: Remove VLA from stmpe driver
gpio: mxc: Switch to SPDX identifier
gpio: mxc: add clock operation
gpio: Remove VLA from gpiolib
gpio: aspeed: Use a cache of output data registers
gpio: aspeed: Set output latch before changing direction
gpio: pca953x: fix address calculation for pcal6524
gpio: pca953x: define masks for addressing common and extended registers
gpio: pca953x: set the PCA_PCAL flag also when matching by DT
...
|
|
Pull livepatching fixlet from Jiri Kosina:
"livepatching documentation fix from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Remove not longer valid limitations from the documentation
|
|
When we create an mdev device, we check for duplicates against the
parent device and return -EEXIST if found, but the mdev device
namespace is global since we'll link all devices from the bus. We do
catch this later in sysfs_do_create_link_sd() to return -EEXIST, but
with it comes a kernel warning and stack trace for trying to create
duplicate sysfs links, which makes it an undesirable response.
Therefore we should really be looking for duplicates across all mdev
parent devices, or as implemented here, against our mdev device list.
Using mdev_list to prevent duplicates means that we can remove
mdev_parent.lock, but in order not to serialize mdev device creation
and removal globally, we add mdev_device.active which allows UUIDs to
be reserved such that we can drop the mdev_list_lock before the mdev
device is fully in place.
Two behavioral notes; first, mdev_parent.lock had the side-effect of
serializing mdev create and remove ops per parent device. This was
an implementation detail, not an intentional guarantee provided to
the mdev vendor drivers. Vendor drivers can trivially provide this
serialization internally if necessary. Second, review comments note
the new -EAGAIN behavior when the device, and in particular the remove
attribute, becomes visible in sysfs. If a remove is triggered prior
to completion of mdev_device_create() the user will see a -EAGAIN
error. While the errno is different, receiving an error during this
period is not, the previous implementation returned -ENODEV for the
same condition. Furthermore, the consistency to the user is improved
in the case where mdev_device_remove_ops() returns error. Previously
concurrent calls to mdev_device_remove() could see the device
disappear with -ENODEV and return in the case of error. Now a user
would see -EAGAIN while the device is in this transitory state.
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The writecache target caches writes on persistent memory or SSD.
It is intended for databases or other programs that need extremely low
commit latency.
The writecache target doesn't cache reads because reads are supposed to
be cached in page cache in normal RAM.
If persistent memory isn't available this target can still be used in
SSD mode.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix missing goto
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> # fix compilation issue with !DAX
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> # use msecs_to_jiffies
Acked-by: Dan Williams <dan.j.williams@intel.com> # reworks to unify ARM and x86 flushing
Signed-off-by: Mike Snitzer <msnitzer@redhat.com>
|
|
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- v9fs updates
- MM
- procfs updates
- lib/ updates
- autofs updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
autofs: small cleanup in autofs_getpath()
autofs: clean up includes
autofs: comment on selinux changes needed for module autoload
autofs: update MAINTAINERS entry for autofs
autofs: use autofs instead of autofs4 in documentation
autofs: rename autofs documentation files
autofs: create autofs Kconfig and Makefile
autofs: delete fs/autofs4 source files
autofs: update fs/autofs4/Makefile
autofs: update fs/autofs4/Kconfig
autofs: copy autofs4 to autofs
autofs4: use autofs instead of autofs4 everywhere
autofs4: merge auto_fs.h and auto_fs4.h
fs/binfmt_misc.c: do not allow offset overflow
checkpatch: improve patch recognition
lib/ucs2_string.c: add MODULE_LICENSE()
lib/mpi: headers cleanup
lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock
lib/idr.c: remove simple_ida_lock
lib/bitmap.c: micro-optimization for __bitmap_complement()
...
|
|
Finally remove autofs4 references in the filesystems documentation.
Link: http://lkml.kernel.org/r/152626709055.28589.416082809460051475.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two files in Documentation/filsystems that should now use
autofs rather than autofs4 in their names.
Link: http://lkml.kernel.org/r/152626707957.28589.3325300375892913999.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently an attempt to set swap.max into a value lower than the actual
swap usage fails, which causes configuration problems as there's no way
of lowering the configuration below the current usage short of turning
off swap entirely. This makes swap.max difficult to use and allows
delegatees to lock the delegator out of reducing swap allocation.
This patch updates swap_max_write() so that the limit can be lowered
below the current usage. It doesn't implement active reclaiming of swap
entries for the following reasons.
* mem_cgroup_swap_full() already tells the swap machinary to
aggressively reclaim swap entries if the usage is above 50% of
limit, so simply lowering the limit automatically triggers gradual
reclaim.
* Forcing back swapped out pages is likely to heavily impact the
workload and mess up the working set. Given that swap usually is a
lot less valuable and less scarce, letting the existing usage
dissipate over time through the above gradual reclaim and as they're
falted back in is likely the better behavior.
Link: http://lkml.kernel.org/r/20180523185041.GR1718769@devbig577.frc2.facebook.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memory controller implements the memory.low best-effort memory
protection mechanism, which works perfectly in many cases and allows
protecting working sets of important workloads from sudden reclaim.
But its semantics has a significant limitation: it works only as long as
there is a supply of reclaimable memory. This makes it pretty useless
against any sort of slow memory leaks or memory usage increases. This
is especially true for swapless systems. If swap is enabled, memory
soft protection effectively postpones problems, allowing a leaking
application to fill all swap area, which makes no sense. The only
effective way to guarantee the memory protection in this case is to
invoke the OOM killer.
It's possible to handle this case in userspace by reacting on MEMCG_LOW
events; but there is still a place for a fail-safe in-kernel mechanism
to provide stronger guarantees.
This patch introduces the memory.min interface for cgroup v2 memory
controller. It works very similarly to memory.low (sharing the same
hierarchical behavior), except that it's not disabled if there is no
more reclaimable memory in the system.
If cgroup is not populated, its memory.min is ignored, because otherwise
even the OOM killer wouldn't be able to reclaim the protected memory,
and the system can stall.
[guro@fb.com: s/low/min/ in docs]
Link: http://lkml.kernel.org/r/20180510130758.GA9129@castle.DHCP.thefacebook.com
Link: http://lkml.kernel.org/r/20180509180734.GA4856@castle.DHCP.thefacebook.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Refine cgroup v2 docs after latest memory.low changes.
Link: http://lkml.kernel.org/r/20180405185921.4942-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the PTE special supports is turned on in per architecture
header files. Most of the time, it is defined in
arch/*/include/asm/pgtable.h depending or not on some other per
architecture static definition.
This patch introduce a new configuration variable to manage this
directly in the Kconfig files. It would later replace
__HAVE_ARCH_PTE_SPECIAL.
Here notes for some architecture where the definition of
__HAVE_ARCH_PTE_SPECIAL is not obvious:
arm
__HAVE_ARCH_PTE_SPECIAL which is currently defined in
arch/arm/include/asm/pgtable-3level.h which is included by
arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.
powerpc
__HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
- arch/powerpc/include/asm/book3s/64/pgtable.h
- arch/powerpc/include/asm/pte-common.h
The first one is included if (PPC_BOOK3S & PPC64) while the second is
included in all the other cases.
So select ARCH_HAS_PTE_SPECIAL all the time.
sparc:
__HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
defined(__arch64__) which are defined through the compiler in
sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
So select ARCH_HAS_PTE_SPECIAL if SPARC64
There is no functional change introduced by this patch.
Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zRam as swap is useful for small memory device. However, swap means
those pages on zram are mostly cold pages due to VM's LRU algorithm.
Especially, once init data for application are touched for launching,
they tend to be not accessed any more and finally swapped out. zRAM can
store such cold pages as compressed form but it's pointless to keep in
memory. Better idea is app developers free them directly rather than
remaining them on heap.
This patch tell us last access time of each block of zram via "cat
/sys/kernel/debug/zram/zram0/block_state".
The output is as follows,
300 75.033841 .wh
301 63.806904 s..
302 63.806919 ..h
First column is zram's block index and 3rh one represents symbol (s:
same page w: written page to backing store h: huge page) of the block
state. Second column represents usec time unit of the block was last
accessed. So above example means the 300th block is accessed at
75.033851 second and it was huge so it was written to the backing store.
Admin can leverage this information to catch cold|incompressible pages
of process with *pagemap* once part of heaps are swapped out.
I used the feature a few years ago to find memory hoggers in userspace
to notify them what memory they have wasted without touch for a long
time. With it, they could reduce unnecessary memory space. However, at
that time, I hacked up zram for the feature but now I need the feature
again so I decided it would be better to upstream rather than keeping it
alone. I hope I submit the userspace tool to use the feature soon.
[akpm@linux-foundation.org: fix i386 printk warning]
[minchan@kernel.org: use ktime_get_boottime() instead of sched_clock()]
Link: http://lkml.kernel.org/r/20180420063525.GA253739@rodete-desktop-imager.corp.google.com
[akpm@linux-foundation.org: documentation tweak]
[akpm@linux-foundation.org: fix i386 printk warning]
[minchan@kernel.org: fix compile warning]
Link: http://lkml.kernel.org/r/20180508104849.GA8209@rodete-desktop-imager.corp.google.com
[rdunlap@infradead.org: fix printk formats]
Link: http://lkml.kernel.org/r/3652ccb1-96ef-0b0b-05d1-f661d7733dcc@infradead.org
Link: http://lkml.kernel.org/r/20180416090946.63057-5-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mark incompressible pages so that we could investigate who is the owner
of the incompressible pages once the page is swapped out via using
upcoming zram memory tracker feature.
With it, we could prevent such pages to be swapped out by using mlock.
Otherwise we might remove them.
This patch exposes new stat for huge pages via mm_stat.
Link: http://lkml.kernel.org/r/20180416090946.63057-3-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add swap max and fail events so that userland can monitor and respond to
running out of swap.
I'm not too sure about the fail event. Right now, it's a bit confusing
which stats / events are recursive and which aren't and also which ones
reflect events which originate from a given cgroup and which targets the
cgroup. No idea what the right long term solution is and it could just
be that growing them organically is actually the only right thing to do.
Link: http://lkml.kernel.org/r/20180416231151.GI1911913@devbig577.frc2.facebook.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull integrity updates from James Morris:
"From Mimi:
- add run time support for specifying additional security xattrs
included in the security.evm HMAC/signature
- some code clean up and bug fixes"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
EVM: unlock on error path in evm_read_xattrs()
EVM: prevent array underflow in evm_write_xattrs()
EVM: Fix null dereference on xattr when xattr fails to allocate
EVM: fix memory leak of temporary buffer 'temp'
IMA: use list_splice_tail_init_rcu() instead of its open coded variant
ima: use match_string() helper
ima: fix updating the ima_appraise flag
ima: based on policy verify firmware signatures (pre-allocated buffer)
ima: define a new policy condition based on the filesystem name
EVM: Allow runtime modification of the set of verified xattrs
EVM: turn evm_config_xattrnames into a list
integrity: Add an integrity directory in securityfs
ima: Remove unused variable ima_initialized
ima: Unify logging
ima: Reflect correct permissions for policy
|
|
Pull DeviceTree updates from Rob Herring:
- Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new
warnings which are either fixed or disabled by default (enabled with
W=1).
- Validate an untrusted offset in DT overlay function
update_usages_of_a_phandle_reference
- Fix a use after free error of_platform_device_destroy
- Fix an off by 1 string errors in unittest
- Avoid creating a struct device for OPP nodes
- Update DT specific submitting-patches.txt with patch content and
subject requirements.
- Move some bindings to their proper subsystem locations
- Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD,
and ArcherMind
- Add documentation for "no-gpio-delays" property in FSI bus GPIO
master
- Add compatible for r8a77990 SoC ravb ethernet block
- More wack-a-mole removal of 'status' property in examples
* tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
dt-bindings: submitting-patches: add guidance on patch content and subject
of: platform: stop accessing invalid dev in of_platform_device_destroy
dt-bindings: net: ravb: Add support for r8a77990 SoC
dt-bindings: Add vendor prefix for ArcherMind
dt-bindings: fsi-master-gpio: Document "no-gpio-delays" property
dt-bindings: Add vendor prefix for Logic PD
of: overlay: validate offset from property fixups
of: unittest: for strings, account for trailing \0 in property length field
drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays
kbuild: disable new dtc graph and unit-address warnings
scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc
MAINTAINERS: add keyword for devicetree overlay notifiers
dt-bindings: define vendor prefix for Wi2Wi, Inc.
dt-bindings: Add vendor prefix for Avnet, Inc.
dt-bindings: Relocate Tegra20 memory controller bindings
dt-bindings: Add "sifive" vendor prefix
dt-bindings: exynos: move ADC binding to iio/adc/ directory
dt-bindings: powerpc/4xx: move 4xx NDFC and EMAC bindings to subsystem directories
dt-bindings: move various RNG bindings to rng/ directory
dt-bindings: move various timer bindings to timer/ directory
...
|
|
Pull auxdisplay updates from Miguel Ojeda:
"Mostly small fixes and cleanups, plus a non-trivial fix for charlcd
- charlcd: fixes and cleanups (Robert Abel and Sean Young)
- Kconfig fixes (Randy Dunlap, Corentin Labbe and Ulf Magnusson)
- cfag12864bfb: const cleanup (Gustavo A. R. Silva)
- Docs/licenses/warnings cleanups"
* tag 'auxdisplay-for-linus-v4.18-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace licenses with SPDX identifiers
auxdisplay: make PANEL a menuconfig
auxdisplay: fix broken menu
auxdisplay: charlcd: Fix and clean up handling of x/y commands
auxdisplay: charlcd: fix hex literal ranges for graphics command
auxdisplay: charlcd: fix two-line command ^[[LN not marked as processed
auxdisplay: charlcd: replace octal literal with form-feed escape sequence
auxdisplay: charlcd: use null character instead of zero literal to terminate strings
auxdisplay: charlcd: no need to call charlcd_gotoxy() if nothing changes
auxdisplay: cfag12864bfb: constify fb_fix_screeninfo and fb_var_screeninfo structures
auxdisplay: img-ascii-lcd: fix typo on select SYSCON/MFD_SYSCON
auxdisplay: img-ascii-lcd: kconfig: Remove MIPS_SEAD3 reference
auxdisplay: arm-charlcd: Fix struct charlcd doc line
MAINTAINERS: auxdisplay: remove obsolete webpages
Doc: misc-devices: move lcd-panel-cgram.txt to auxdisplay/
|
|
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for v4.18.
No core changes this time! Just a calm all-over-the-place drivers,
updates and fixes cycle as it seems.
New drivers/subdrivers:
- Actions Semiconductor S900 driver with more Actions variants for
S700, S500 in the pipe. Also generic GPIO support on top of the
same driver and IRQ support is in the pipe.
- Renesas r8a77470 PFC support.
- Renesas r8a77990 PFC support.
- Allwinner Sunxi H6 R_PIO support.
- Rockchip PX30 support.
- Meson Meson8m2 support.
- Remove support for the ill-fated Samsung Exynos 5440 SoC.
Improvements:
- Context save/restore support in pinctrl-single.
- External interrupt support for the Mediatek MT7622.
- Qualcomm ACPI HID QCOM8002 supported.
Fixes:
- Fix up suspend/resume support for Exynos 5433.
- Fix Strago DMI fixes on the Intel Cherryview"
* tag 'pinctrl-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: cherryview: limit Strago DMI workarounds to version 1.0
pinctrl: at91-pio4: add missing of_node_put
pinctrl: armada-37xx: Fix spurious irq management
gpiolib: discourage gpiochip_add_pin[group]_range for DT pinctrls
pinctrl: msm: fix gpio-hog related boot issues
MAINTAINERS: update entry for Mediatek pin controller
pinctrl: mediatek: remove unused fields in struct mtk_eint_hw
pinctrl: mediatek: use generic EINT register maps for each SoC
pinctrl: mediatek: add EINT support to MT7622 SoC
pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit
dt-bindings: pinctrl: add external interrupt support to MT7622 pinctrl
pinctrl: freescale: Switch to SPDX identifier
pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banks
pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments
pinctrl: sh-pfc: r8a77965: Add I2C pin support
pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions
pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions
pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions
pinctrl: sh-pfc: r8a77990: Add bias pinconf support
pinctrl: sh-pfc: Initial R8A77990 PFC support
...
|
|
Core changes:
- Add Miquel as a NAND maintainer
- Add access mode to the nand_page_io_req struct
- Fix kernel-doc in rawnand.h
- Support bit-wise majority to recover from corrupted ONFI parameter
pages
- Stop checking FAIL bit after a SET_FEATURES, as documented in the
ONFI spec
Raw NAND Driver changes:
- Fix and cleanup the error path of many NAND controller drivers
- GPMI:
* Cleanup/simplification of a few aspects in the driver
* Take ECC setup specified in the DT into account
- sunxi: remove support for GPIO-based R/B polling
- MTK:
* Use of_device_get_match_data() instead of of_match_device()
* Add an entry in MAINTAINERS for this driver
* Fix nand-ecc-step-size and nand-ecc-strength description in the DT
bindings doc
- fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page
OneNAND driver changes:
- samsung: use dev_get_drvdata() instead of platform_get_drvdata()
|
|
Pull mailbox updates from Jassi Brar:
- Remove HAS_DMA config dependencies
- New STMicroelectronics STM32 IPCC driver
- Enable QCom driver to run more controllers
- Fixed return code from null to ptr-err for Brcm driver
- Fix kconfig dependencies for the HiSilicon driver
* tag 'mailbox-v4.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox/drivers/hisi: Consolidate the Kconfig for the MAILBOX
mailbox: Add support for Qualcomm SDM845 SoCs
dt-bindings: mailbox: Add APSS shared binding for SDM845 SoCs
mailbox: bcm2835: Fix of_xlate return value
mailbox: qcom: Add msm8998 hmss compatible
mailbox: add STMicroelectronics STM32 IPCC driver
dt-bindings: mailbox: add STMicroelectronics STM32 IPCC binding
mailbox: Remove depends on HAS_DMA in case of platform dependency
|
|
Pull PCI updates from Bjorn Helgaas:
- unify AER decoding for native and ACPI CPER sources (Alexandru
Gagniuc)
- add TLP header info to AER tracepoint (Thomas Tai)
- add generic pcie_wait_for_link() interface (Oza Pawandeep)
- handle AER ERR_FATAL by removing and re-enumerating devices, as
Downstream Port Containment does (Oza Pawandeep)
- factor out common code between AER and DPC recovery (Oza Pawandeep)
- stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)
- share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)
- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)
- respect platform ownership of LTR (Bjorn Helgaas)
- clear interrupt status in top half to avoid interrupt storm (Oza
Pawandeep)
- neaten pci=earlydump output (Andy Shevchenko)
- avoid errors when extended config space inaccessible (Gilles Buloz)
- prevent sysfs disable of device while driver attached (Christoph
Hellwig)
- use core interface to report PCIe link properties in bnx2x, bnxt_en,
cxgb4, ixgbe (Bjorn Helgaas)
- remove unused pcie_get_minimum_link() (Bjorn Helgaas)
- fix use-before-set error in ibmphp (Dan Carpenter)
- fix pciehp timeouts caused by Command Completed errata (Bjorn
Helgaas)
- fix refcounting in pnv_php hotplug (Julia Lawall)
- clear pciehp Presence Detect and Data Link Layer Status Changed on
resume so we don't miss hotplug events (Mika Westerberg)
- only request pciehp control if we support it, so platform can use
ACPI hotplug otherwise (Mika Westerberg)
- convert SHPC to be builtin only (Mika Westerberg)
- request SHPC control via _OSC if we support it (Mika Westerberg)
- simplify SHPC handoff from firmware (Mika Westerberg)
- fix an SHPC quirk that mistakenly included *all* AMD bridges as well
as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)
- assign a bus number even to non-native hotplug bridges to leave
space for acpiphp additions, to fix a common Thunderbolt xHCI
hot-add failure (Mika Westerberg)
- keep acpiphp from scanning native hotplug bridges, to fix common
Thunderbolt hot-add failures (Mika Westerberg)
- improve "partially hidden behind bridge" messages from core (Mika
Westerberg)
- add macros for PCIe Link Control 2 register (Frederick Lawler)
- replace IB/hfi1 custom macros with PCI core versions (Frederick
Lawler)
- remove dead microblaze and xtensa code (Bjorn Helgaas)
- use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)
- remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
Helgaas)
- add managed interface to get PCI host bridge resources from OF (Jan
Kiszka)
- add support for unbinding generic PCI host controller (Jan Kiszka)
- fix memory leaks when unbinding generic PCI host controller (Jan
Kiszka)
- request legacy VGA framebuffer only for VGA devices to avoid false
device conflicts (Bjorn Helgaas)
- turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)
- add generic enable function for simple SR-IOV hardware (Alexander
Duyck)
- use generic SR-IOV enable for ena, nvme (Alexander Duyck)
- add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)
- add ACS quirk for Intel 300 series (Mika Westerberg)
- enable register clock for Armada 7K/8K (Gregory CLEMENT)
- reduce Keystone "link already up" log level (Fabio Estevam)
- move private DT functions to drivers/pci/ (Rob Herring)
- factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)
- add DesignWare support to the endpoint test driver (Gustavo
Pimentel)
- add DesignWare support for endpoint mode (Gustavo Pimentel)
- use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
artpec6 (Gustavo Pimentel)
- fix Qualcomm bitwise NOT issue (Dan Carpenter)
- add Qualcomm runtime PM support (Srinivas Kandagatla)
- fix DesignWare enumeration below bridges (Koen Vandeputte)
- use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)
- add configfs entries for pci_epf_driver device IDs (Kishon Vijay
Abraham I)
- clean up pci_endpoint_test driver (Gustavo Pimentel)
- update Layerscape maintainer email addresses (Minghuan Lian)
- add COMPILE_TEST to improve build test coverage (Rob Herring)
- fix Hyper-V bus registration failure caused by domain/serial number
confusion (Sridhar Pitchai)
- improve Hyper-V refcounting and coding style (Stephen Hemminger)
- avoid potential Hyper-V hang waiting for a response that will never
come (Dexuan Cui)
- implement Mediatek chained IRQ handling (Honghui Zhang)
- fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)
- add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)
- add Mobiveil MSI support (Subrahmanya Lingappa)
- clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
(Marek Vasut)
- poll more frequently (5us vs 5ms) while waiting for R-Car data link
active (Marek Vasut)
- use generic OF parsing interface in R-Car (Vladimir Zapolskiy)
- add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)
- add R-Car gen3 PHY support (Sergei Shtylyov)
- improve R-Car PHYRDY polling (Sergei Shtylyov)
- clean up R-Car macros (Marek Vasut)
- use runtime PM for R-Car controller clock (Dien Pham)
- update arm64 defconfig for Rockchip (Shawn Lin)
- refactor Rockchip code to facilitate both root port and endpoint
mode (Shawn Lin)
- add Rockchip endpoint mode driver (Shawn Lin)
- support VMD "membar shadow" feature (Jon Derrick)
- support VMD bus number offsets (Jon Derrick)
- add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)
- remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
selections (Bjorn Helgaas)
- clean up quirks.c organization and whitespace (Bjorn Helgaas)
* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
PCI/AER: Replace struct pcie_device with pci_dev
PCI/AER: Remove unused parameters
PCI: qcom: Include gpio/consumer.h
PCI: Improve "partially hidden behind bridge" log message
PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
PCI: Move resource distribution for single bridge outside loop
PCI: Account for all bridges on bus when distributing bus numbers
ACPI / hotplug / PCI: Drop unnecessary parentheses
ACPI / hotplug / PCI: Mark stale PCI devices disconnected
ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
PCI: hotplug: Add hotplug_is_native()
PCI: shpchp: Add shpchp_is_native()
PCI: shpchp: Fix AMD POGO identification
PCI: mobiveil: Add MSI support
PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
PCI/AER: Decode Error Source Requester ID
PCI/AER: Remove aer_recover_work_func() forward declaration
PCI/DPC: Use the generic pcie_do_fatal_recovery() path
PCI/AER: Pass service type to pcie_do_fatal_recovery()
PCI/DPC: Disable ERR_NONFATAL handling by DPC
...
|
|
Pull media updates from Mauro Carvalho Chehab:
- remove of atomisp driver from staging, as nobody would have time to
dedicate huge efforts to fix all the problems there. Also, we have a
feeling that the driver may not even run the way it is.
- move Zoran driver to staging, in order to be either fixed to use VB2
and the proper media kAPIs or to be removed
- remove videobuf-dvb driver, with is unused for a while
- some V4L2 documentation fixes/improvements
- new sensor drivers: imx258 and ov7251
- a new driver was added to allow using I2C transparent drivers
- several improvements at the ddbridge driver
- several improvements at the ISDB pt1 driver, making it more coherent
with the DVB framework
- added a new platform driver for MIPI CSI-2 RX: cadence
- now, all media drivers can be compiled on x86 with COMPILE_TEST
- almost all media drivers now build on non-x86 architectures with
COMPILE_TEST
- lots of other random stuff: cleanups, support for new board models,
bug fixes, etc
* tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits)
media: omap2: fix compile-testing with FB_OMAP2=m
media: media/radio/Kconfig: add back RADIO_ISA
media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl()
media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power
media: arch: sh: migor: Fix TW9910 PDN gpio
media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure
media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG
media: marvel-ccic: allow ccic and mmp drivers to coexist
media: uvcvideo: Prevent setting unavailable flags
media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges
media: dvb-frontends/stv0910: make TS speed configurable
media: ddbridge/mci: add identifiers to function definition arguments
media: ddbridge/mci: protect against out-of-bounds array access in stop()
media: rc: ensure input/lirc device can be opened after register
media: rc: nuvoton: Keep device enabled during reg init
media: rc: nuvoton: Keep track of users on CIR enable/disable
media: rc: nuvoton: Tweak the interrupt enabling dance
media: uvcvideo: Support realtek's UVC 1.5 device
media: uvcvideo: Fix driver reference counting
media: gspca_zc3xx: Enable short exposure times for OV7648
...
|
|
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
live patching again.
- Add support for patching barrier_nospec in copy_from_user() and
syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu
Malaterre.
- Several series optimising various parts of the 32-bit code from
Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K"
("GEFanuc,C2K"), which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by
Steve, and a fix to our powernv cpuidle driver. Then there's a series
touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
been in next for several weeks.
Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"
* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
cpuidle: powernv: Fix promotion from snooze if next state disabled
powerpc: fix build failure by disabling attribute-alias warning in pci_32
ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
powerpc/pkeys: Detach execute_only key on !PROT_EXEC
powerpc/powernv: copy/paste - Mask SO bit in CR
powerpc: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove support for Marvell mv64x60 i2c controller
powerpc/boot: Remove support for Marvell MPSC serial controller
powerpc/embedded6xx: Remove C2K board support
powerpc/lib: optimise PPC32 memcmp
powerpc/lib: optimise 32 bits __clear_user()
powerpc/time: inline arch_vtime_task_switch()
powerpc/Makefile: set -mcpu=860 flag for the 8xx
powerpc: Implement csum_ipv6_magic in assembly
powerpc/32: Optimise __csum_partial()
powerpc/lib: Adjust .balign inside string functions for PPC32
...
|
|
Pull overlayfs fixes from Miklos Szeredi:
"This contains a fix for the vfs_mkdir() issue discovered by Al, as
well as other fixes and cleanups"
* tag 'ovl-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: use inode_insert5() to hash a newly created inode
ovl: Pass argument to ovl_get_inode() in a structure
vfs: factor out inode_insert5()
ovl: clean up copy-up error paths
ovl: return EIO on internal error
ovl: make ovl_create_real() cope with vfs_mkdir() safely
ovl: create helper ovl_create_temp()
ovl: return dentry from ovl_create_real()
ovl: struct cattr cleanups
ovl: strip debug argument from ovl_do_ helpers
ovl: remove WARN_ON() real inode attributes mismatch
ovl: Kconfig documentation fixes
ovl: update documentation for unionmount-testsuite
|
|
Pull fuse updates from Miklos Szeredi:
"The most interesting part of this update is user namespace support,
mostly done by Eric Biederman. This enables safe unprivileged fuse
mounts within a user namespace.
There are also a couple of fixes for bugs found by syzbot and
miscellaneous fixes and cleanups"
* tag 'fuse-update-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: don't keep dead fuse_conn at fuse_fill_super().
fuse: fix control dir setup and teardown
fuse: fix congested state leak on aborted connections
fuse: Allow fully unprivileged mounts
fuse: Ensure posix acls are translated outside of init_user_ns
fuse: add writeback documentation
fuse: honor AT_STATX_FORCE_SYNC
fuse: honor AT_STATX_DONT_SYNC
fuse: Restrict allow_other to the superblock's namespace or a descendant
fuse: Support fuse filesystems outside of init_user_ns
fuse: Fail all requests with invalid uids or gids
fuse: Remove the buggy retranslation of pids in fuse_dev_do_read
fuse: return -ECONNABORTED on /dev/fuse read after abort
fuse: atomic_o_trunc should truncate pagecache
|
|
The apparmor information in the apparmor.rst file is out of date.
Update it to the correct git reference for the master apparmor tree.
Update the wiki location to use apparmor.net which forwards to the
current wiki location on gitlab.com. Update user space tools address
to gitlab.com.
Signed-off-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
|
|
Pull tracing updates from Steven Rostedt:
"One new feature was added to ftrace, which is the trace_marker now
supports triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix
that was added late in the cycle"
* tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits)
tracing: Use match_string() instead of open coding it in trace_set_options()
branch-check: fix long->int truncation when profiling branches
ring-buffer: Fix typo in comment
ring-buffer: Fix a bunch of typos in comments
tracing/selftest: Add test to test simple snapshot trigger for trace_marker
tracing/selftest: Add test to test hist trigger between kernel event and trace_marker
tracing/selftest: Add selftests to test trace_marker histogram triggers
ftrace/selftest: Fix reset_trigger() to handle triggers with filters
ftrace/selftest: Have the reset_trigger code be a bit more careful
tracing: Document trace_marker triggers
tracing: Allow histogram triggers to access ftrace internal events
tracing: Prevent further users of zero size static arrays in trace events
tracing: Have zero size length in filter logic be full string
tracing: Add trigger file for trace_markers tracefs/ftrace/print
tracing: Do not show filter file for ftrace internal events
tracing: Add brackets in ftrace event dynamic arrays
tracing: Have event_trace_init() called by trace_init_tracefs()
tracing: Add __find_event_file() to find event files without restrictions
tracing: Do not reference event data in post call triggers
tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
...
|
|
Pull audit updates from Paul Moore:
"Another reasonable chunk of audit changes for v4.18, thirteen patches
in total.
The thirteen patches can mostly be broken down into one of four
categories: general bug fixes, accessor functions for audit state
stored in the task_struct, negative filter matches on executable
names, and extending the (relatively) new seccomp logging knobs to the
audit subsystem.
The main driver for the accessor functions from Richard are the
changes we're working on to associate audit events with containers,
but I think they have some standalone value too so I figured it would
be good to get them in now.
The seccomp/audit patches from Tyler apply the seccomp logging
improvements from a few releases ago to audit's seccomp logging;
starting with this patchset the changes in
/proc/sys/kernel/seccomp/actions_logged should apply to both the
standard kernel logging and audit.
As usual, everything passes the audit-testsuite and it happens to
merge cleanly with your tree"
[ Heh, except it had trivial merge conflicts with the SELinux tree that
also came in from Paul - Linus ]
* tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Fix wrong task in comparison of session ID
audit: use existing session info function
audit: normalize loginuid read access
audit: use new audit_context access funciton for seccomp_actions_logged
audit: use inline function to set audit context
audit: use inline function to get audit context
audit: convert sessionid unset to a macro
seccomp: Don't special case audited processes when logging
seccomp: Audit attempts to modify the actions_logged sysctl
seccomp: Configurable separator for the actions_logged string
seccomp: Separate read and write code for actions_logged sysctl
audit: allow not equal op for audit by executable
audit: add syscall information to FEATURE_CHANGE records
|
|
Pull printk updates from Petr Mladek:
- Help userspace log daemons to catch up with a flood of messages. They
will get woken after each message even if the console is far behind
and handled by another process.
- Flush printk safe buffers safely even when panic() happens in the
normal context.
- Fix possible va_list reuse when race happened in printk_safe().
- Remove %pCr printf format to prevent sleeping in the atomic context.
- Misc vsprintf code cleanup.
* tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: drop in_nmi check from printk_safe_flush_on_panic()
lib/vsprintf: Remove atomic-unsafe support for %pCr
serial: sh-sci: Stop using printk format %pCr
thermal: bcm2835: Stop using printk format %pCr
clk: renesas: cpg-mssr: Stop using printk format %pCr
printk: fix possible reuse of va_list variable
printk: wake up klogd in vprintk_emit
vsprintf: Tweak pF/pf comment
lib/vsprintf: Mark expected switch fall-through
lib/vsprintf: Replace space with '_' before crng is ready
lib/vsprintf: Deduplicate pointer_string()
lib/vsprintf: Move pointer_string() upper
lib/vsprintf: Make flag_spec global
lib/vsprintf: Make strspec global
lib/vsprintf: Make dec_spec global
lib/test_printf: Mark big constant with UL
|
|
Pull IPMI updates from Corey Minyard:
"It's been a busy release for the IPMI driver. Some notable changes:
- A user was running into timeout issues doing maintenance commands
over the IPMB network behind an IPMI controller.
Extend the maintenance mode concept to messages over IPMB and allow
the timeouts to be tuned.
- Lots of cleanup, style fixing, some bugfixes, and such.
- At least one user was having trouble with the way the IPMI driver
would lock the i2c driver module it used.
The IPMI driver was not designed for hotplug. However, hotplug is a
reality now, so the IPMI driver was modified to support hotplug.
- The proc interface code is now completely removed. Long live sysfs!"
* tag 'for-linus-4.18' of git://github.com/cminyard/linux-ipmi: (35 commits)
ipmi: Properly release srcu locks on error conditions
ipmi: NPCM7xx KCS BMC: enable interrupt to the host
ipmi:bt: Set the timeout before doing a capabilities check
ipmi: Remove the proc interface
ipmi_ssif: Fix uninitialized variable issue
ipmi: add an NPCM7xx KCS BMC driver
ipmi_si: Clean up shutdown a bit
ipmi_si: Rename intf_num to si_num
ipmi: Remove smi->intf checks
ipmi_ssif: Get rid of unused intf_num
ipmi: Get rid of ipmi_user_t and ipmi_smi_t in include files
ipmi: ipmi_unregister_smi() cannot fail, have it return void
ipmi_devintf: Add an error return on invalid ioctls
ipmi: Remove usecount function from interfaces
ipmi_ssif: Remove usecount handling
ipmi: Remove condition on interface shutdown
ipmi_ssif: Convert over to a shutdown handler
ipmi_si: Convert over to a shutdown handler
ipmi: Rework locking and shutdown for hot remove
ipmi: Fix some counter issues
...
|
|
Pull EDAC updates from Borislav Petkov:
- Stratix10 SDRAM support to altera_edac (Thor Thayer)
- the usual misc fixes all over the place
[ Also, shared branch for socfpga_stratix10.dtsi file changes with the
socfpga tree ]
* tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, ghes: Make platform-based whitelisting x86-only
EDAC, altera: Fix ARM64 build warning
EDAC, skx: Fix skx_edac build error when ACPI_NFIT=m
EDAC, ghes: Use BIT() macro
EDAC, ghes: Add DDR4 and NVDIMM memory types
EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10
Documentation: dt: edac: Move Altera SOCFPGA EDAC file
EDAC, altera: Add support for Stratix10 SDRAM EDAC
Documentation: dt: socfpga: Add Stratix10 ECC Manager binding
EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error()
arm64: dts: stratix10: add sdram ecc
EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy"
EDAC, ghes: Add a null pointer check in ghes_edac_unregister()
ghes, EDAC: Fix ghes_edac registration
arm64: dts: stratix10: Change pad skew values for EMAC0 PHY driver
ARM: dts: consistently use 'atmel' as at24 manufacturer in cyclone5
arm64: dts: stratix10: Add PL330 DMAC to Stratix10 dts
arm64: dts: stratix10: enable i2c, add i2c periperals
arm64: dts: stratix10: use clock bindings for the Stratix10 platform
|
|
- update arm64 defconfig for Rockchip (Shawn Lin)
- refactor Rockchip code to facilitate both root port and endpoint mode
(Shawn Lin)
- add Rockchip endpoint mode driver (Shawn Lin)
* lorenzo/pci/rockchip:
arm64: defconfig: update config for Rockchip PCIe
dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe EP driver
PCI: rockchip: Add EP driver for Rockchip PCIe controller
dt-bindings: PCI: rockchip: Rename rockchip-pcie.txt to rockchip-pcie-host.txt
PCI: rockchip: Split out common function to init controller
PCI: rockchip: Split out rockchip_pcie_parse_dt() to parse DT
PCI: rockchip: Separate common code from RC driver
# Conflicts:
# drivers/pci/host/pcie-rockchip.c
|
|
- clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek
Vasut)
- poll more frequently (5us vs 5ms) while waiting for R-Car data link
active (Marek Vasut)
- use generic OF parsing interface in R-Car (Vladimir Zapolskiy)
- add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)
- add R-Car gen3 PHY support (Sergei Shtylyov)
- improve R-Car PHYRDY polling (Sergei Shtylyov)
- clean up R-Car macros (Marek Vasut)
- use runtime PM for R-Car controller clock (Dien Pham)
* lorenzo/pci/rcar:
PCI: rcar: Remove IRQ mappings in rcar_pcie_enable_msi() failpath
PCI: rcar: Teardown MSI setup if rcar_pcie_enable() fails
PCI: rcar: Add missing irq_dispose_mapping() into failpath
PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources()
PCI: rcar: Poll more often in rcar_pcie_wait_for_dl()
PCI: rcar: Reuse generic pci_parse_request_of_pci_ranges() function
DT: pci: rcar-pci: document R8A77980 bindings
PCI: rcar: Factor out rcar_pcie_hw_init() call
PCI: rcar: Add R-Car gen3 PHY support
PCI: rcar: Remove PHYRDY polling from rcar_pcie_hw_init_h1()
PCI: rcar: Poll PHYRDY in rcar_pcie_hw_init()
PCI: rcar: Clean up the macros
PCI: rcar: Use runtime PM to control controller clock
# Conflicts:
# drivers/pci/host/pcie-rcar.c
|
|
- add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)
- add Mobiveil MSI support (Subrahmanya Lingappa)
* pci/host/mobiveil:
PCI: mobiveil: Add MSI support
PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver DT bindings
|
|
- reduce Keystone "link already up" log level (Fabio Estevam)
- move private DT functions to drivers/pci/ (Rob Herring)
- factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)
- add DesignWare support to the endpoint test driver (Gustavo Pimentel)
- add DesignWare support for endpoint mode (Gustavo Pimentel)
- use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
artpec6 (Gustavo Pimentel)
- fix Qualcomm bitwise NOT issue (Dan Carpenter)
- add Qualcomm runtime PM support (Srinivas Kandagatla)
* lorenzo/pci/dwc:
PCI: qcom: add runtime pm support to pcie_port
PCI: qcom: Fix a bitwise vs logical NOT typo
PCI: dwc: dra7xx: Use devm_ioremap_resource() instead of devm_ioremap()
PCI: dwc: artpec6: Use devm_ioremap_resource() instead of devm_ioremap()
misc: pci_endpoint_test: Add DesignWare EP entry
dt-bindings: PCI: designware: Add support for EP in DesignWare driver
PCI: dwc: Add support for EP mode
dt-bindings: PCI: designware: Example update
PCI: Move private DT related functions into private header
PCI: dwc: Move CONFIG_PCI depends to menu
PCI: dwc: Replace magic number by defines
PCI: dwc: Small computation improvement
PCI: dwc: Replace lower into upper case characters
PCI: dwc: Define maximum number of vectors
PCI: imx6: Remove space before tabs
PCI: keystone: Do not treat link up message as error
# Conflicts:
# include/linux/of_pci.h
|
|
- enable register clock for Armada 7K/8K (Gregory CLEMENT)
* lorenzo/pci/armada8k:
PCI: armada8k: Fix clock resource by adding a register clock
PCI: armada8k: Remove useless test before clk_disable_unprepare()
|
|
- add generic enable function for simple SR-IOV hardware (Alexander
Duyck)
- use generic SR-IOV enable for ena, nvme (Alexander Duyck)
- add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)
- add ACS quirk for Intel 300 series (Mika Westerberg)
* pci/virtualization:
PCI/IOV: Allow PF drivers to limit total_VFs to 0
PCI: Add "pci=noats" boot parameter
PCI: Add ACS quirk for Intel 300 series
PCI: Add ACS quirk for Intel 7th & 8th Gen mobile
nvme-pci: Use pci_sriov_configure_simple() to enable VFs
net: ena: Use pci_sriov_configure_simple() to enable VFs
PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs
PCI/IOV: Add pci_sriov_configure_simple()
|
|
Pull Kconfig updates from Masahiro Yamada:
"Kconfig now supports new functionality to perform textual
substitution. It has been a while since Linus suggested to move
compiler option tests from makefiles to Kconfig. Finally, here it is.
The implementation has been generalized into a Make-like macro
language.
Some built-in functions such as 'shell' are provided. Variables and
user-defined functions are also supported so that 'cc-option',
'ld-option', etc. are implemented as macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1"
* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: Avoid format overflow warning from GCC 8.1
kbuild: Move last word of nconfig help to the previous line
kconfig: Add testconfig into make help output
kconfig: add basic helper macros to scripts/Kconfig.include
kconfig: show compiler version text in the top comment
kconfig: test: add Kconfig macro language tests
Documentation: kconfig: document a new Kconfig macro language
kconfig: error out if a recursive variable references itself
kconfig: add 'filename' and 'lineno' built-in variables
kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
kconfig: expand lefthand side of assignment statement
kconfig: support append assignment operator
kconfig: support simply expanded variable
kconfig: support user-defined function and recursively expanded variable
kconfig: begin PARAM state only when seeing a command keyword
kconfig: replace $(UNAME_RELEASE) with function call
kconfig: add 'shell' built-in function
kconfig: add built-in function support
kconfig: make default prompt of mainmenu less specific
kconfig: remove sym_expand_string_value()
...
|
|
Include SDM845 APSS shared to the list of possible bindings
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
Linus Torvalds
Alex Williamson
Mikulas Patocka
Ian Kent
Tejun Heo
Roman Gushchin
Laurent Dufour
Minchan Kim
Boris Brezillon
Jordan Glover
Bjorn Helgaas
Sibi Sankar