| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Pull networking fixes from David Miller:
1) Fix non-blocking connect() in x25, from Martin Schiller.
2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.
3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.
4) Limit size of TSO packets properly in lan78xx driver, from Eric
Dumazet.
5) r8152 probe needs an endpoint sanity check, from Johan Hovold.
6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
John Fastabend.
7) hns3 needs short frames padded on transmit, from Yunsheng Lin.
8) Fix netfilter ICMP header corruption, from Eyal Birger.
9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.
10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.
11) Fix memory leak in act_ctinfo, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: reject overlapped queues in TC-MQPRIO offload
cxgb4: fix Tx multi channel port rate limit
net: sched: act_ctinfo: fix memory leak
bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
bnxt_en: Fix ipv6 RFS filter matching logic.
bnxt_en: Fix NTUPLE firmware command failures.
net: systemport: Fixed queue mapping in internal ring map
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
net: hns: fix soft lockup when there is not enough memory
net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
net/sched: act_ife: initalize ife->metalist earlier
netfilter: nat: fix ICMP header corruption on ICMP errors
net: wan: lapbether.c: Use built-in RCU list checking
netfilter: nf_tables: fix flowtable list del corruption
netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
netfilter: nft_tunnel: ERSPAN_VERSION must not be null
netfilter: nft_tunnel: fix null-attribute check
...
|
|
Add packet trap that can report NVE packets that the device decided to
drop because their overlay source MAC is multicast.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add packet traps that can report packets that were dropped during tunnel
decapsulation.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add packet trap that can report packets that reached the router, but are
non-routable. For example, IGMP queries can be flooded by the device in
layer 2 and reach the router. Such packets should not be routed and
instead dropped.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are
dropped for these reasons when they need to be routed through/from
existing router interfaces (RIF) which are disabled.
Add devlink driver-specific traps and mlxsw trap IDs used to report
these traps.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull char/misc fixes from Greg KH:
"Here are some small fixes for 5.5-rc7
Included here are:
- two lkdtm fixes
- coresight build fix
- Documentation update for the hw process document
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Add Amazon contact for embargoed hardware issues
lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP
lkdtm/bugs: Make double-fault test always available
coresight: etm4x: Fix unused function warning
|
|
The driver is named "mlxsw", not "mlx5".
Fixes: d4255d75856f ("devlink: document info versions for each driver")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We maintain global statistics for an entire MDIO bus, as well as broken
down, per MDIO bus address statistics. Given that it is possible for
MDIO devices such as switches to access MDIO bus addresses for which
there is not a mdio_device instance created (therefore not a a
corresponding device directory in sysfs either), we also maintain
per-address statistics under the statistics folder. The layout looks
like this:
/sys/class/mdio_bus/../statistics/
transfers
errrors
writes
reads
transfers_<addr>
errors_<addr>
writes_<addr>
reads_<addr>
When a mdio_device instance is registered, a statistics/ folder is
created with the tranfers, errors, writes and reads attributes which
point to the appropriate MDIO bus statistics structure.
Statistics are 64-bit unsigned quantities and maintained through the
u64_stats_sync.h helper functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Review of the recently added documentation file for the qed driver
noticed a couple of typos. Fix them now.
Noticed-by: Michal Kalderon <mkalderon@marvell.com>
Fixes: 0f261c3ca09e ("devlink: add a driver-specific file for the qed driver")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull x86 platform driver fixes from Andy Shevchenko:
- Fix keyboard brightness control for ASUS laptops
- Better handling parameters of GPD pocket fan module to avoid
thermal shock
- Add IDs to PMC platform driver to support Intel Comet Lake
- Fix potential dead lock in Mellanox TM FIFO driver and ABI
documentation
* tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86:
Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces
Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces
platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0
platform/x86: intel_pmc_core: update Comet Lake platform driver
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits
platform/x86: GPD pocket fan: Use default values when wrong modparams are given
platform/mellanox: fix potential deadlock in the tmfifo driver
platform/x86: intel-ips: Use the correct style for SPDX License Identifier
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/da6467d2649339b42339124fd19a8a2f91cc00dd.camel@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missed "cpld4_version" attribute.
Fixes: 52675da1d087 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".
Fixes: 2752e34442b5 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes, a documentation fix, and a removal of a spec
violation for the bus recovery algorithm in the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: fix bus recovery stop mode timing
i2c: bcm2835: Store pointer to bus clock
dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60
i2c: at91: fix clk_offset for sam9x60
|
|
A couple of locations accidentally misspelled snapshot as shapshot.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that devlink regions can be triggered via
DEVLINK_CMD_REGION_TRIGGER, document this in the devlink-region.rst
file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Primarily based on the DPIPE netdev conference paper, introduce a new
file to document the dpipe interface.
This likely needs further improvement, but is at least a good overall
start.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Take the little bit of documentation for resources from various commit
messages and combine it into a new devlink-resource.rst file.
This could probably be expanded on even further by someone with more
knowledge of how the devlink resources work.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename the trap-specific netdevimsim.rst file, and expand it to include
documentation of all the devlink features currently implemented by the
netdevsim driver code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IONIC device driver allocates a devlink and reports versions. Add
documentation for this driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Shannon Nelson <snelson@pensando.io>
Acked-by: Shannon Nelson <snelson@pensandi.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Also document the regions created by the mlx4 driver. This is currently
the only in-tree driver that creates devlink region snapshots.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qed driver recently added devlink support with a single devlink
parameter. Add a driver-specific file to document the devlink features
that the qed driver supports.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlx5 and mlxsw drivers have driver-specific documentation for the
devlink features they support. No such file was added for mlx4.
Add a file to document the mlx4 devlink support. Initially it contains
only the devlink parameters.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the set of info versions reported by each device driver, including
a description of what the version represents, and what modes (fixed,
running, stored) it reports.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several drivers document what parameters they support in
a devlink-params-*.txt file. This file is supposed to contain both the
list of generic parameters implemented by the driver, as well as a list
of driver-specific parameters and their descriptions.
It would also be good if the driver documentation included other
driver-specific implementations, such as info versions, devlink
regions, and so forth.
Convert all of these documentation files to reStructuredText, and rename
them to just the driver name. Future changes will include other
driver-specific implementations. Each file will contain a table for the
generic parameters implemented, as well as a separate table for the
driver-specific parameters.
Future sections such as for devlink info versions will be added to these
files. This avoids creating additional devlink-<feature>-<driver> files
for each devlink feature, reducing clutter in the documentation folder.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mention that drivers must support devlink-reload in order for driverinit
parameters to function properly
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A few generic devlink parameters have been added, but never documented.
Fix that now.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the generic parameters descriptions into the reStructuredText
format.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename the devlink-info-versions.rst file to a plain devlink-info.rst
file. Add additional paragraphs explaining what devlink-info is for,
and the expectation that drivers use the generic names where plausible.
Note that drivers which use non-standard info version names ought to
document these in a driver-specific info-versions.rst file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the devlink-health documentation to use the newer
ReStructuredText format.
Note that it's unclear what OOB stood for, and it has been left as-is
without a proper first-use expansion of the acronym.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Combine the documentation for devlink into a subfolder, and provide an
index.rst file that can be used to generally describe devlink.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
|
|
Add the stmmac RST file to the index.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the documentation of the driver to RST format and delete the old
txt and old information that no longer applies.
Also, add some new information.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull spi fixes from Mark Brown:
"A small collection of fixes here, one to make the newly added PTP
timestamping code more accurate, a few driver fixes and a fix for the
core DT binding to document the fact that we support eight wire buses"
* tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Document Octal mode as valid SPI bus width
spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode
spi: Don't look at TX buffer for PTP system timestamping
spi: uniphier: Fix FIFO threshold
|
|
SAM9X60 also supports i2c-sda-hold-time-ns. Fix the documentation accordingly.
Fixes: 2034e3f4c9a5 ("dt-bindings: i2c: at91: add new compatible")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Some MAC PCS blocks are unable to provide interrupts when their status
changes. As we already have support in phylink for polling status, use
this to provide a hook for MACs to enable polling mode.
The patch idea was picked up from Russell King's suggestion on the macb
phylink patch thread here [0] but the implementation was changed.
Instead of introducing a new phylink_start_poll() function, which would
make the implementation cumbersome for common PHYLINK implementations
for multiple types of devices, like DSA, just add a boolean property to
the phylink_config structure, which is just as backwards-compatible.
https://lkml.org/lkml/2019/12/16/603
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent discussion has revealed that the use of PHY_INTERFACE_MODE_10GKR
is incorrect. Add a 10GBASE-R definition, document both the -R and -KR
versions, and the fact that 10GKR was used incorrectly.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation"
* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
riscv: ftrace: correct the condition logic in function graph tracer
riscv: dts: Add DT support for SiFive L2 cache controller
riscv: gcov: enable gcov for RISC-V
riscv: mm: use __pa_symbol for kernel symbols
|
|
Formalize, in kernel documentation, the patch acceptance policy for
arch/riscv. In summary, it states that as maintainers, we plan to
only accept patches for new modules or extensions that have been
frozen or ratified by the RISC-V Foundation.
We've been following these guidelines for the past few months. In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.
Based on a suggestion from Matthew Wilcox, we also add a link to this
file to Documentation/process/index.rst, to make this document easier
to find. The format of this document has also been changed to align
to the format outlined in the maintainer entry profiles, in accordance
with comments from Jon Corbet and Dan Williams.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Krste Asanovic <krste@berkeley.edu>
Cc: Andrew Waterman <waterman@eecs.berkeley.edu>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
|
|
Make the layout of kcov_remote_arg the same for 32-bit and 64-bit code.
This makes it more convenient to write userspace apps that can be
compiled into 32-bit or 64-bit binaries and still work with the same
64-bit kernel.
Also use proper __u32 types in uapi headers instead of unsigned ints.
Link: http://lkml.kernel.org/r/9e91020876029cfefc9211ff747685eba9536426.1575638983.git.andreyknvl@google.com
Fixes: eec028c9386ed1a ("kcov: remote coverage support")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: "Jacky . Cao @ sony . com" <Jacky.Cao@sony.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DaveM's git tree have been moved into a named subdir 'netdev' to deal with
allowing Jakub Kicinski to help co-maintain the trees.
Link: https://www.kernel.org/doc/html/latest/networking/netdev-FAQ.html
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables GCOV code coverage measurement on RISC-V.
Lightly tested on QEMU and Hifive Unleashed board, seems to work as
expected.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
SPI core supports Octal SPI controllers which have 8 IO lines.
Therefore document 8 as a valid option for spi-tx{rx}-bus-width
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200102102118.23318-1-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It can take on the values of '0', '1', and '2' and thus
is not a boolean.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h
handling.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann.
2) Fix port selection on big endian in nft_tproxy, from Phil Sutter.
3) Fix precision tracking for unbound scalars in bpf verifier, from
Daniel Borkmann.
4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio
Messina.
5) Do not perform a neigh confirmation during a pmtu update over a
tunnel, from Hangbin Liu.
6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur.
7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean.
8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from
Geert Uytterhoeven
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()
net/sched: add delete_empty() to filters and use it in cls_flower
tcp: Fix highest_sack and highest_sack_seq
ptp: fix the race between the release of ptp_clock and cdev
net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S
Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation
net: dsa: sja1105: Remove restriction of zero base-time for taprio offload
net: dsa: sja1105: Really make the PTP command read-write
net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot
cxgb4/cxgb4vf: fix flow control display for auto negotiation
mlxsw: spectrum: Use dedicated policer for VRRP packets
mlxsw: spectrum_router: Skip loopback RIFs during MAC validation
net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs
net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device
net_sched: sch_fq: properly set sk->sk_pacing_status
bnx2x: Fix accounting of vlan resources among the PFs
bnx2x: Use appropriate define for vlan credit
of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy
net: phy: aquantia: add suspend / resume ops for AQR105
dpaa_eth: fix DMA mapping leak
...
|
|
Since commit 86db36a347b4 ("net: dsa: sja1105: Implement state machine
for TAS with PTP clock source"), this paragraph is no longer true. So
remove it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
David S. Miller
Linus Torvalds
Amit Cohen
Ido Schimmel
Florian Fainelli
Jacob Keller
David Woodhouse
Vadim Pasternak
Jose Abreu
Eugen Hristev
Vladimir Oltean
Russell King
Paul Walmsley
Andrey Konovalov
Jesper Dangaard Brouer
Zong Li
Vignesh Raghavendra
Vladimir Oltean