Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix a vxlan typo in the mlx5 driver documentation.
Signed-off-by: Hans Wippel <ndev@hwipl.net>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This patch adds the required documentation for the embedded L2 switch
inside the NXP LS1028A chip.
I've submitted it in the legacy format instead of yaml schema, because
DSA itself has not yet been converted to yaml, and this driver defines
no custom bindings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Special handling is needed in bareudp module for IP & MPLS as they
support more than one ethertypes.
MPLS has 2 ethertypes. 0x8847 for MPLS unicast and 0x8848 for MPLS multicast.
While decapsulating MPLS packet from UDP packet the tunnel destination IP
address is checked to determine the ethertype. The ethertype of the packet
will be set to 0x8848 if the tunnel destination IP address is a multicast
IP address. The ethertype of the packet will be set to 0x8847 if the
tunnel destination IP address is a unicast IP address.
IP has 2 ethertypes.0x0800 for IPV4 and 0x86dd for IPv6. The version
field of the IP header tunnelled will be checked to determine the ethertype.
This special handling to tunnel additional ethertypes will be disabled
by default and can be enabled using a flag called multiproto. This flag can
be used only with ethertypes 0x8847 and 0x0800.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Bareudp tunnel module provides a generic L3 encapsulation
tunnelling module for tunnelling different protocols like MPLS,
IP,NSH etc inside a UDP tunnel.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add device tree binding doc for the PTP clock based on IDT 82P33
Synchronization Management Unit (SMU).
Changes since v1:
- As suggested by Rob Herring:
1. Drop reg description for i2c
2. Replace i2c@1 with i2c
3. Add addtionalProperties: false
Signed-off-by: Min Li <min.li.xe@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add packet traps that can report packets that were dropped during ACL
processing.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-02-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 25 non-merge commits during the last 4 day(s) which contain
a total of 33 files changed, 2433 insertions(+), 161 deletions(-).
The main changes are:
1) Allow for adding TCP listen sockets into sock_map/hash so they can be used
with reuseport BPF programs, from Jakub Sitnicki.
2) Add a new bpf_program__set_attach_target() helper for adding libbpf support
to specify the tracepoint/function dynamically, from Eelco Chaudron.
3) Add bpf_read_branch_records() BPF helper which helps use cases like profile
guided optimizations, from Daniel Xu.
4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu.
5) Relax BTF mandatory check if only used for libbpf itself e.g. to process
BTF defined maps, from Andrii Nakryiko.
6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has
been observed that former fails in envs with low memlock, from Yonghong Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflict resolution of ice_virtchnl_pf.c based upon work by
Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.6-rc3.
Also included in here are some updates for some documentation files
that I seem to be maintaining these days.
The driver fixes are:
- small fixes for the habanalabs driver
- fsi driver bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Swap out the ambassador for Canonical
habanalabs: patched cb equals user cb in device memset
habanalabs: do not halt CoreSight during hard reset
habanalabs: halt the engines before hard-reset
MAINTAINERS: remove unnecessary ':' characters
fsi: aspeed: add unspecified HAS_IOMEM dependency
COPYING: state that all contributions really are covered by this file
Documentation/process: Change Microsoft contact for embargoed hardware issues
embargoed-hardware-issues: drop Amazon contact as the email address now bounces
Documentation/process: Add Arm contact for embargoed HW issues
|
|
Add documentation explaining the basic functionality and design
principles of the API
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drm-misc-fixes for v5.6-rc3:
- Fix dt binding for sunxi.
- Allow only 1 rotation argument, and allow 0 rotation in video cmdline.
- Small compiler warning fix for panfrost.
- Fix when using performance counters in panfrost when using per fd address space.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f5a6370d-9898-6c72-43e4-5bb56a99b6f2@linux.intel.com
|
|
bpf now has its own mailing list bpf@vger.kernel.org.
Update the bpf_devel_QA.rst file to reflect this.
Also llvm has switch to github with llvm and clang
in the same repo https://github.com/llvm/llvm-project.git.
Update the QA file with newer build instructions.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200221004354.930952-1-yhs@fb.com
|
|
Pull IPMI update from Corey Minyard:
"Minor bug fixes for IPMI
I know this is late; I've been travelling and, well, I've been
distracted.
This is just a few bug fixes and adding i2c support to the IPMB
driver, which is something I wanted from the beginning for it"
* tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi:
drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write
ipmi:ssif: Handle a possible NULL pointer reference
drivers: ipmi: Modify max length of IPMB packet
drivers: ipmi: Support raw i2c packet in IPMB
|
|
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and improvements to selftests.
On top of this, Mauro converted the KVM documentation to rst format,
which was very welcome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
docs: virt: guest-halt-polling.txt convert to ReST
docs: kvm: review-checklist.txt: rename to ReST
docs: kvm: Convert timekeeping.txt to ReST format
docs: kvm: Convert s390-diag.txt to ReST format
docs: kvm: Convert ppc-pv.txt to ReST format
docs: kvm: Convert nested-vmx.txt to ReST format
docs: kvm: Convert mmu.txt to ReST format
docs: kvm: Convert locking.txt to ReST format
docs: kvm: Convert hypercalls.txt to ReST format
docs: kvm: arm/psci.txt: convert to ReST
docs: kvm: convert arm/hyp-abi.txt to ReST
docs: kvm: Convert api.txt to ReST format
docs: kvm: convert devices/xive.txt to ReST
docs: kvm: convert devices/xics.txt to ReST
docs: kvm: convert devices/vm.txt to ReST
docs: kvm: convert devices/vfio.txt to ReST
docs: kvm: convert devices/vcpu.txt to ReST
docs: kvm: convert devices/s390_flic.txt to ReST
docs: kvm: convert devices/mpic.txt to ReST
docs: kvm: convert devices/arm-vgit.txt to ReST
...
|
|
Pull input updates from Dmitry Torokhov:
- a few drivers have been updated to use flexible-array syntax instead
of GCC extension
- ili210x touchscreen driver now supports the 2120 protocol flavor
- a couple more of Synaptics devices have been switched over to RMI4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
Input: synaptics - enable SMBus on ThinkPad L470
Input: synaptics - switch T470s to RMI4 by default
Input: gpio_keys - replace zero-length array with flexible-array member
Input: goldfish_events - replace zero-length array with flexible-array member
Input: psmouse - switch to using i2c_new_scanned_device()
Input: ili210x - add ili2120 support
Input: ili210x - fix return value of is_visible function
|
|
John Johansen will take over as the process ambassador for Canonical
when dealing with embargoed hardware issues.
Cc: John Johansen <john.johansen@canonical.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Harry Wei <harryxiyou@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Link: https://lore.kernel.org/r/20200213214842.21312-1-tyhicks@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Due to some merge conflict, this file ended being alone under
Documentation/virtual.
The file itself is almost at ReST format. Just minor
adjustments are needed:
- Adjust title markup;
- Adjust a list identation;
- add a literal block markup;
- Add some blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This file is already in ReST compatible format.
So, rename it and add to the kvm's index.rst.
While here, use the standard conversion for document titles.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use document title and chapter markups;
- Add markups for literal blocks;
- Add markups for tables;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This file is almost in ReST format. Just one change was
needed:
- Add markups for a literal block and change its indentation.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use document title and chapter markups;
- Add markups for tables;
- Use list markups;
- Add markups for literal blocks;
- Add blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This file is almost in ReST format. Just a small set of
changes were needed:
- Add markups for lists;
- Add markups for a literal block;
- Adjust whitespaces.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use document title and chapter markups;
- Add markups for tables;
- Add markups for literal blocks;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use document title and chapter markups;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Add a title for the document;
- Adjust whitespaces for it to be properly formatted after
parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Add proper markups for titles;
- Adjust whitespaces and blank lines to match ReST
needs;
- Mark literal blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
convert api.txt document to ReST format while trying to keep
its format as close as possible with the authors intent, and
avoid adding uneeded markups.
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use title markups;
- adjust indentation and add blank lines as needed;
- use :field: markups;
- Use cross-references;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use standard title markup;
- adjust lists;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use standard markup for document title;
- Adjust indentation and add blank lines as needed;
- use the notes markup;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This document is almost in ReST format. The only thing
needed is to mark a list as such and to add an extra
whitespace.
Yet, let's also use the standard document title markup,
as it makes easier if anyone wants later to add sessions
to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use title markups;
- change indent to match ReST syntax;
- use proper table markups;
- use literal block markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use title markups;
- change indent to match ReST syntax;
- use proper table markups;
- use literal block markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Fix document title to match ReST format
- Convert the table to be properly recognized
- use proper markups for literal blocks
- Some indentation fixes to match ReST
While here, add an index for kvm devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Use document title markup;
- Convert tables;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Fix document title to match ReST format
- Convert the table to be properly recognized
- Some indentation fixes to match ReST syntax.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Several URLs are pointing to outdated places.
Update the references for the URLs whose contents still exists,
removing the others.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Instead of pointing for a pre-2.4 and a seaparate patch,
update it to match current upstream, as UML was merged
a long time ago.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Despite being an old document, it contains lots of information
that could still be useful.
The document has a nice style with makes easy to convert to
ReST. So, let's convert it to ReST.
This patch does:
- Use proper markups for titles;
- Mark and proper indent literal blocks;
- don't use an 'o' character for lists;
- other minor changes required for the doc to be parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add this file to a new kvm/arm index.rst, in order for it to
be shown as part of the virt book.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display
pipeline to schemas") introduced a YAML schema for the Allwinner TCON DT
binding, but the H6 TCON-TV compatible was mistakenly set to fallback on
the A83t's, while the initial documentation and the DT are using R40's.
Fix that.
Fixes: f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210100455.78695-1-maxime@cerno.tech
|
|
Update Microsoft contact from Sasha to James.
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
Link: https://lore.kernel.org/r/alpine.LRH.2.21.2002061006350.22130@namei.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Peter's email address bounces, so remove him as the contact for Amazon.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200205122551.GA1185549@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding myself to list after getting voluntold
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Grant Likely <grant.likely@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200205001627.27356-1-grant.likely@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds support for the Ilitek ili2120 touchscreen found in the
Fairphone 2 smartphone.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20200209151904.661210-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
|