| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some host controllers need to know the existence of clkreq signal routing
to downstream devices to be able to advertise low power features like
ASPM L1 substates. Without clkreq signal routing being present, enabling
ASPM L1 substates might lead to downstream devices being disconnected
from the bus. Hence a new device tree property 'supports-clkreq' is added
to make such host controllers aware of clkreq signal routing to
downstream devices.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
|
|
Add support to enable CDM (Configuration Dependent Module) registers check
for any data corruption. CDM registers include standard PCIe configuration
space registers, Port Logic registers and iATU and DMA registers.
Refer Section S.4 of Synopsys DesignWare Cores PCI Express Controller Databook
Version 4.90a.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Make .BTF section allocated and expose its contents through sysfs.
/sys/kernel/btf directory is created to contain all the BTFs present
inside kernel. Currently there is only kernel's main BTF, represented as
/sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported,
each module will expose its BTF as /sys/kernel/btf/<module-name> file.
Current approach relies on a few pieces coming together:
1. pahole is used to take almost final vmlinux image (modulo .BTF and
kallsyms) and generate .BTF section by converting DWARF info into
BTF. This section is not allocated and not mapped to any segment,
though, so is not yet accessible from inside kernel at runtime.
2. objcopy dumps .BTF contents into binary file and subsequently
convert binary file into linkable object file with automatically
generated symbols _binary__btf_kernel_bin_start and
_binary__btf_kernel_bin_end, pointing to start and end, respectively,
of BTF raw data.
3. final vmlinux image is generated by linking this object file (and
kallsyms, if necessary). sysfs_btf.c then creates
/sys/kernel/btf/kernel file and exposes embedded BTF contents through
it. This allows, e.g., libbpf and bpftool access BTF info at
well-known location, without resorting to searching for vmlinux image
on disk (location of which is not standardized and vmlinux image
might not be even available in some scenarios, e.g., inside qemu
during testing).
Alternative approach using .incbin assembler directive to embed BTF
contents directly was attempted but didn't work, because sysfs_proc.o is
not re-compiled during link-vmlinux.sh stage. This is required, though,
to update embedded BTF data (initially empty data is embedded, then
pahole generates BTF info and we need to regenerate sysfs_btf.o with
updated contents, but it's too late at that point).
If BTF couldn't be generated due to missing or too old pahole,
sysfs_btf.c handles that gracefully by detecting that
_binary__btf_kernel_bin_start (weak symbol) is 0 and not creating
/sys/kernel/btf at all.
v2->v3:
- added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H);
- created proper kobject (btf_kobj) for btf directory (Greg K-H);
- undo v2 change of reusing vmlinux, as it causes extra kallsyms pass
due to initially missing __binary__btf_kernel_bin_{start/end} symbols;
v1->v2:
- allow kallsyms stage to re-use vmlinux generated by gen_btf();
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Renesas DT binding updates for v5.4
- RZ/G2 updates for the R-Car CAN and CANFD DT bindings.
* tag 'renesas-dt-bindings-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM]
dt-bindings: can: rcar_canfd: document r8a774a1 support
Link: https://lore.kernel.org/r/20190802120355.1430-4-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Reset controller changes for v5.4
This tag adds support for the i.MX8MM SRC via the reset-imx7 driver
and for DesignWare IP reset controllers via the reset-simple driver.
A typo in the i.MX8MQ DSI reset definitions is fixed, and the Meson
reset driver and binding headers are updated to SPDX license
identifiers.
* tag 'reset-for-v5.4' of git://git.pengutronix.de/git/pza/linux:
reset: Add DesignWare IP support to simple reset
dt-bindings: Document the DesignWare IP reset bindings
dt-bindings: reset: amlogic,meson8b-reset: update with SPDX Licence identifier
dt-bindings: reset: amlogic,meson-gxbb-reset: update with SPDX Licence identifier
reset: reset-meson: update with SPDX Licence identifier
dt-bindings: reset: Fix typo in imx8mq resets
dt-bindings: reset: imx7: Add support for i.MX8MM
Link: https://lore.kernel.org/r/1565603668.5017.2.camel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the format of verity files on ext4, and the corresponding inode
and superblock flags.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Update the fscrypt documentation file to catch up to all the latest
changes, including the new ioctls to manage master encryption keys in
the filesystem-level keyring and the support for v2 encryption policies.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Prefix all filesystem encryption UAPI constants except the ioctl numbers
with "FSCRYPT_" rather than with "FS_". This namespaces the constants
more appropriately and makes it clear that they are related specifically
to the filesystem encryption feature, and to the 'fscrypt_*' structures.
With some of the old names like "FS_POLICY_FLAGS_VALID", it was not
immediately clear that the constant had anything to do with encryption.
This is also useful because we'll be adding more encryption-related
constants, e.g. for the policy version, and we'd otherwise have to
choose whether to use unclear names like FS_POLICY_V1 or inconsistent
names like FS_ENCRYPTION_POLICY_V1.
For source compatibility with existing userspace programs, keep the old
names defined as aliases to the new names.
Finally, as long as new names are being defined anyway, I skipped
defining new names for the fscrypt mode numbers that aren't actually
used: INVALID (0), AES_256_GCM (2), AES_256_CBC (3), SPECK128_256_XTS
(7), and SPECK128_256_CTS (8).
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fec's gpio phy reset properties have been deprecated.
Update the dt-bindings documentation to explicitly mark
them as such, and provide a short description of the
recommended alternative.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It seems a UTF-8 byte order mark (the least useful kind of BOM...) snuck
into the file and broke Sphinx's detection of the title line.
Besides making arm/samsung-s3c24xx/index.html look a little better, this
patch also confines the non-index pages in arm/samsung-s3c24xx to their
own table of contents.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
"make assabet_config" doesn't work.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The support for the following boards, among others, was removed in 2004
with commit "[ARM] Remove broken SA1100 machine support.":
- ADS Bitsy
- Brutus
- Freebird
- ADS GraphicsClient Plus
- ADS GraphicsMaster
- Höft & Wessel Webpanel
- Compaq Itsy
- nanoEngine
- Pangolin
- PLEB
- Yopy
Tifon support has been removed in 2.4.3.3.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> found a reference
error in Chinese howto.rst. and further more there more infos of
latexdocs/epubdocs format doc making in English howto.rst.
So I update this part according to latest howto.rst and settled
the correct reference.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix broken reference to virt/index.rst.
Fixes: 2f5947dfcaec ("Documentation: move Documentation/virtual to Documentation/virt")
Signed-off-by: Sheriff Esseson <sheriffesseson@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Signed-off-by: Marco Villegas <git@marvil07.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With the introduction of Documentation/sphinx/automarkup.py, socket() is
parsed as a reference to the in-kernel definition of socket. Sphinx then
decides that struct socket is a good match, which is usually not
intended, when the syscall is meant instead. This was observed in
Documentation/networking/af_xdp.rst.
Prevent socket() from being misinterpreted by adding it to the Skipfuncs
list in automarkup.py.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
In Python, like in C, when a comma is omitted in a list of strings, the
two strings around the missing comma are concatenated.
Cc: stable@vger.kernel.org # v5.2 only
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add prefix for Acme Systems srl
https://www.acmesystems.it
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20190728210403.2730-2-uwe@kleine-koenig.org
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.4 cycle
Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices. Done from immutable branch.
A counter subsystem patche in here as well.
Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.
New device support
* adis16460
- New driver based on ADIS framework which needed addition of support
for cs_change_delay. Includes device tree binding.
* cros_ec
- Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
- Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
- Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
- New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
- New driver for this ON Semiconductor Ambient light sensor.
Features and cleanups
* tree wide
- Drop error prints after platform_get_irq as already prints errors
internally if any occur.
* docs
- Document mounting matrix.
- Fix a missing newline at end of file.
* ad2s1210
- Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
- Add of_device_id array to explicity handling DT bindings.
* ad7606
- Lots of rework leading to support for software configure modes in ad7616
parts.
- Debugfs register access support.
* am2315
- Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
- Typo in module description.
* cm36651
- Convert to i2c_new_dummy_device.
- Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
- Calibscale support for accel, gyro and magnetometer.
- Tidy up some error codes to return the error from the stack rather than
-EIO.
- Determine protocol version.
- Add a sign vector to the core to fix sensor rotation if necessary.
Cannot just be done with mount matrix as already in use in many devices.
- Tidy up INFO_SCALE being in both the separate and shared lists.
- Drop a lot of dplicate code from the cros-ec-accel-legacy driver
and use the core provided code instead.
- Make frequency range available to userspace.
* counter / ftm-quaddec
- Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
- Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
- Use gpiod_set_value_cansleep as we don't care here and there is a
board out there where it needs to sleep.
- Switch to device managed APIs for all of probe and drop explict remove.
* hp03
- Convert to i2c_new_dummy_device.
* maxim thermocouple
- Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
- Fix typo in constant naming.
* mpu6050
- Use devm_add_action_or_reset in place of explicit error handling.
- Make text in Kconfig more explicit about which parts are supported.
* mxc4005
- Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
- Convert device tree bindings to yaml.
- Add a MAINTAINERS entry
* sc27xx
- Introduce a local struct device *dev pointer to avoid lots of deref.
- Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
- Typo fix in naming.
* si1145
- Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
- Lots of rework to enable switch to regmap.
- Regmap conversion at the end.
- Tidy up some inconsistencies in buffer setup ops.
- Tidy up an oddity by dropping get_irq_data_ready function in favour
of direct access.
- Stop allocating buffer in buffer enable in favour of just embedding
a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
- l3c device support (LSM6DSO and LSM6DSR)
- tidy up irq return logic which was strangely written.
- fix up an ABI quirk where this driver used separate scale
attributes, even though they were always shared by type.
* stk33xx
- Device tree bindings include manufacturer ID.
* stm32-adc
- Add control for supply to analog switches including DT bindings.
* stm32 timer
- Drop the quadrature mode support. Believed there were no users so
take this opportunity to drop this unwanted ABI.
* tsl2772
- Switch to device mangage APIs for all of probe and drop explicit remove.
- Use regulator_bulk_* APIs to reduce repitition.
* veml6070
- Convert to i2c_new_dummy_device.
* tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (84 commits)
iio: hi8435: Drop hi8435_remove() by using devres for remaining elements
iio: hi8435: Use gpiod_set_value_cansleep()
iio:st_sensors: remove buffer allocation at each buffer enable
iio: imu: inv_mpu6050: be more explicit on supported chips
iio: light: noa1305: Add support for NOA1305
dt-bindings: Add binding document for NOA1305
iio: remove get_irq_data_ready() function pointer and use IRQ number directly
iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
iio: tsl2772: Use regulator_bulk_() APIs
iio: tsl2772: Use devm_iio_device_register
iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
iio: tsl2772: Use devm_add_action_or_reset
iio: Remove dev_err() usage after platform_get_irq()
iio: light: si1145: Use device-managed APIs
iio:pressure: preenable/postenable/predisable fixup for ST press buffer
iio:magn: preenable/postenable/predisable fixup for ST magn buffer
iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
iio:accel: preenable/postenable/predisable fixup for ST accel buffer
dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
iio: imu: st_lsm6dsx: add support to ISM330DHCX
...
|
|
Linux 5.3-rc4
* tag 'v5.3-rc4': (750 commits)
Linux 5.3-rc4
Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
mm/memremap: Fix reuse of pgmap instances with internal references
...
|
|
Add new compatible string "fsl,imx6ull-esai" in the binding document.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1565346467-5769-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds the soc & board binding for i.MX8MN.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
SCMIv2.0 adds a new Reset Management Protocol to manage various reset
states a given device or domain can enter. Extend the existing SCMI
bindings to add reset protocol support by re-using the reset bindings
for both reset providers and consumers.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable
on-board voltage shifting logic for the DDC bus using a gpio to be able
to access DDC bus. Use ddc-en-gpios property on the hdmi-connector to
model this.
Add binding documentation for optional ddc-en-gpios property.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806155744.10263-3-megous@megous.com
|
|
The RN5T618 family of PMICs can be used as system management
controllers, in which case they handle poweroff and restart. Document
this capability by referring to the corresponding generic DT binding.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Sync up with mainline to bring in device_property_count_u32 andother
newer APIs.
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull RISC-V updates from Paul Walmsley:
"A few minor RISC-V updates for v5.3-rc4:
- Remove __udivdi3() from the 32-bit Linux port, converting the only
upstream user to use do_div(), per Linux policy
- Convert the RISC-V standard clocksource away from per-cpu data
structures, since only one is used by Linux, even on a multi-CPU
system
- A set of DT binding updates that remove an obsolete text binding in
favor of a YAML binding, fix a bogus compatible string in the
schema (thus fixing a "make dtbs_check" warning), and clarifies the
future values expected in one of the RISC-V CPU properties"
* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
dt-bindings: riscv: remove obsolete cpus.txt
RISC-V: Remove udivdi3
riscv: delay: use do_div() instead of __udivdi3()
dt-bindings: Update the riscv,isa string description
RISC-V: Remove per cpu clocksource
|
|
For consistency with the naming of (most) other documentation files for DT
bindings for Renesas IP blocks rename the Renesas USB3.0 peripheral
documentation file from renesas,usb3.txt to renesas,usb3-peri.txt
This refines a recent rename from renesas_usb3.txt to renesas,usb3.txt.
The motivation is to more accurately reflect the IP block documented in
this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Sderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20190809213710.31783-1-horms+renesas@verge.net.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move amediatech,x96-max and seirobotics,sei510 to the S905D2 section and
update the S905D2 description to S905D2/X2/Y2.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The current implementation of TCP MTU probing can considerably
underestimate the MTU on lossy connections allowing the MSS to get down to
48. We have found that in almost all of these cases on our networks these
paths can handle much larger MTUs meaning the connections are being
artificially limited. Even though TCP MTU probing can raise the MSS back up
we have seen this not to be the case causing connections to be "stuck" with
an MSS of 48 when heavy loss is present.
Prior to pushing out this change we could not keep TCP MTU probing enabled
b/c of the above reasons. Now with a reasonble floor set we've had it
enabled for the past 6 months.
The new sysctl will still default to TCP_MIN_SND_MSS (48), but gives
administrators the ability to control the floor of MSS probing.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
Amlogic G12B SoC family, on a board with the same form factor as the
VIM/VIM2 models. It ships in two variants; basic and
pro which differ in RAM and eMMC size:
- 2GB (basic) or 4GB (pro) LPDDR4 RAM
- 16GB (basic) or 32GB (pro) eMMC 5.1 storage
- 16MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add a specific compatible for the Amlogic G12B bases A311D SoC used
in the Khadas VIM3.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add a specific compatible for the Amlogic G12B family based S922X SoC
to differentiate with the A311D SoC from the same family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The first version of the bindings is missing a generic compatible that
is used by the base node (GX), and then extended by the SoC device trees
(GXBB, GXL, GXM)
Also change the example to use "video-codec" instead of "video-decoder",
as the former is the one used in almost all cases when it comes to video
decode/encode accelerators.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
During reset the VMMC regulator doesn't reach 0V and only drops to
1.8V, furthermore the pulse width is under 200us whereas the SD
specification expect 1ms.
For this 2 reasons being able to no reset at all the VMMC during warm
reset and keep the current voltage is a good workaround. The TWL6030
allows this but needs to be aware of it and this configuration should
also be shared with the bootloader.
This is the purpose of this new property: ti,retain-on-reset
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190725094542.16547-2-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
[ This is rather a revival of the patch Tomas sent in months ago, but
applying only with the quirk model option -- tiwai ]
Hard coded coefficients to make Huawuei Matebook X right speaker
work. The Matebook X has a ALC298, please refer to bug 197801 on
how these numbers were reverse engineered from the Windows driver
The reversed engineered sequence represents a repeating pattern
of verbs, and the only values that are changing periodically are
written on indexes 0x23 and 0x25:
0x500, 0x23
0x400, VALUE1
0x500, 0x25
0x400, VALUE2
* skipped reading sequences (0x500 - 0xc00 sequences are ignored)
* static values from reverse engineering are used
NOTE: since a significant risk is still considered, this is provided
as an experimental fix that isn't applied as default for now. For
enabling the fix, you'll have to choose huawei-mbx-stereo via model
option of snd-hda-intel module.
If we get feedback from users that this works stably, we may apply it
per default.
[ Some coding style fixes and replacement with AC_VERB_* by tiwai ]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197801
Signed-off-by: Tomas Espeleta <tomas.espeleta@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
KVM/arm fixes for 5.3
- A bunch of switch/case fall-through annotation, fixing one actual bug
- Fix PMU reset bug
- Add missing exception class debug strings
|
|
Moritz writes:
FPGA Manager changes for 5.4-rc1
Here is the first set of changes for the 5.4-rc1 merge window.
They're all more or less cleanup patches:
- Carlos' patch addresses a checkpatch warning
- My first patch changes the return type of a function to align it with
the fact that nothing checks the return value and it uncoditionally
returned 0 anyways
- My second patch somehow fell through the cracks before and cleans up
the FPGA bridge bindings by consolidating them instead of repeating
the same paragraph over and over again.
All of these patches have been in the last few linux-next releases
without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
dt-bindings: fpga: Consolidate bridge properties
fpga: altera-pr-ip: Make alt_pr_unregister function void
fpga: altera-cvp: Fix function definition argument
|
|
A few vendor specific bindings are now covered by common bindings.
Let the driver parse the common bindings to make use of common
inverting and swapping mechnism. Aslo make use of
touchscreen_report_pos() to ensure the correct inverting-swapping
order.
The vendor specific properties are used as default (backward
compatibility) and gets overwritten by common bindings.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The ti,y-max is used for the maximum value of the Y axis.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
It helps to keep sorted order for compatibles and nodes, so sort them
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190809073616.1235-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As the kernel no longer prints out the memory layout on boot, this patch
adds this information back to the memory document.
Also, as the 52-bit support introduces some subtle changes to the arm64
memory, the rationale behind these changes are also added to the memory
document.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
KASAN_SHADOW_OFFSET is a constant that is supplied to gcc as a command
line argument and affects the codegen of the inline address sanetiser.
Essentially, for an example memory access:
*ptr1 = val;
The compiler will insert logic similar to the below:
shadowValue = *(ptr1 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET)
if (somethingWrong(shadowValue))
flagAnError();
This code sequence is inserted into many places, thus
KASAN_SHADOW_OFFSET is essentially baked into many places in the kernel
text.
If we want to run a single kernel binary with multiple address spaces,
then we need to do this with KASAN_SHADOW_OFFSET fixed.
Thankfully, due to the way the KASAN_SHADOW_OFFSET is used to provide
shadow addresses we know that the end of the shadow region is constant
w.r.t. VA space size:
KASAN_SHADOW_END = ~0 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET
This means that if we increase the size of the VA space, the start of
the KASAN region expands into lower addresses whilst the end of the
KASAN region is fixed.
Currently the arm64 code computes KASAN_SHADOW_OFFSET at build time via
build scripts with the VA size used as a parameter. (There are build
time checks in the C code too to ensure that expected values are being
derived). It is sufficient, and indeed is a simplification, to remove
the build scripts (and build time checks) entirely and instead provide
KASAN_SHADOW_OFFSET values.
This patch removes the logic to compute the KASAN_SHADOW_OFFSET in the
arm64 Makefile, and instead we adopt the approach used by x86 to supply
offset values in kConfig. To help debug/develop future VA space changes,
the Makefile logic has been preserved in a script file in the arm64
Documentation folder.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add bindings for the TI NSPIRE simple display panels.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806135437.7451-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
drm-misc-next for 5.4:
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
|
|
sk_validate_xmit_skb() and drivers depend on the sk member of
struct sk_buff to identify segments requiring encryption.
Any operation which removes or does not preserve the original TLS
socket such as skb_orphan() or skb_clone() will cause clear text
leaks.
Make the TCP socket underlying an offloaded TLS connection
mark all skbs as decrypted, if TLS TX is in offload mode.
Then in sk_validate_xmit_skb() catch skbs which have no socket
(or a socket with no validation) and decrypted flag set.
Note that CONFIG_SOCK_VALIDATE_XMIT, CONFIG_TLS_DEVICE and
sk->sk_validate_xmit_skb are slightly interchangeable right now,
they all imply TLS offload. The new checks are guarded by
CONFIG_TLS_DEVICE because that's the option guarding the
sk_buff->decrypted member.
Second, smaller issue with orphaning is that it breaks
the guarantee that packets will be delivered to device
queues in-order. All TLS offload drivers depend on that
scheduling property. This means skb_orphan_partial()'s
trick of preserving partial socket references will cause
issues in the drivers. We need a full orphan, and as a
result netem delay/throttling will cause all TLS offload
skbs to be dropped.
Reusing the sk_buff->decrypted flag also protects from
leaking clear text when incoming, decrypted skb is redirected
(e.g. by TC).
See commit 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect
through ULP") for justification why the internal flag is safe.
The only location which could leak the flag in is tcp_bpf_sendmsg(),
which is taken care of by clearing the previously unused bit.
v2:
- remove superfluous decrypted mark copy (Willem);
- remove the stale doc entry (Boris);
- rely entirely on EOR marking to prevent coalescing (Boris);
- use an internal sendpages flag instead of marking the socket
(Boris).
v3 (Willem):
- reorganize the can_skb_orphan_partial() condition;
- fix the flag leak-in through tcp_bpf_sendmsg.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add debugfs descriptions for HiSilicon ZIP and QM driver.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
Vidya Sagar
Andrii Nakryiko
Arnd Bergmann
Eric Biggers
Sven Van Asbroeck
Jonathan Neuschäfer
Alex Shi
Sheriff Esseson
Marco Villegas
Uwe Kleine-König
Greg Kroah-Hartman
Mauro Carvalho Chehab
Shengjiu Wang
Anson Huang
Sudeep Holla
Ondrej Jirman
Dmitry Torokhov
Linus Torvalds
Simon Horman
Christian Hewitt
Josh Hunt
Neil Armstrong
Maxime Jourdan
Gregory CLEMENT
Tomas Espeleta
Paolo Bonzini
Marco Felsch
Vinod Koul
Steve Capper
Linus Walleij
Dave Airlie
Jakub Kicinski
Zhou Wang