| Age | Commit message (Collapse) | Author | Files | Lines |
|
This documentation has been incorporated in dtschema dt-bindings
for the devices supported by CAMSS and is no longer helpful.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add bindings for qcom,sdm845-camss in order to support the camera
subsystem for SDM845.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add bindings for qcom,sdm660-camss in order to support the camera
subsystem on SDM630/660 and SDA variants.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add bindings for qcom,msm8996-camss in order to support the camera
subsystem on MSM8996.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add bindings for qcom,msm8916-camss in order to support the camera
subsystem on MSM8916.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The _FRAME_SKIP_ enums were missing the _VIDEO prefix.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The media bus bit width of MEDIA_BUS_FMT_RGB101010_1X30 is 30.
So, 'Bit31' and 'Bit30' cells for the 'MEDIA_BUS_FMT_RGB101010_1X30'
row should be spaces instead of '0's.
Fixes: 54f38fcae536 ("media: docs: move uAPI book to userspace-api/media")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add bindings documentation for i.MX8QXP/QM JPEG decoder & encoder driver.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The added format is V4L2_PIX_FMT_YUV24, this is a packed
YUV 4:4:4 format, with 8 bits for each component, 24 bits
per sample.
This format is used by the i.MX 8QuadMax and i.MX 8DualXPlus/8QuadXPlus
JPEG encoder/decoder.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The documentation for V4L2_CID_MPEG_VIDEO_BITRATE was missing the word
'Average': this is the average video bitrate.
The V4L2_CID_MPEG_VIDEO_BITRATE_PEAK documentation *does* refer to
V4L2_CID_MPEG_VIDEO_BITRATE as the average video bitrate.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Until now, the VP8 V4L2 API was not exported as a public API,
and only defined in a private media header (media/vp8-ctrls.h).
The reason for this was a concern about the API not complete
and ready to support VP8 decoding hardware accelerators.
After reviewing the VP8 specification in detail, and now
that the API is able to support Cedrus and Hantro G1,
we can consider this ready.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Since we are ready to stabilize the VP8 stateless API,
move the parsed VP8 pixel format.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Rename to struct v4l2_vp8_loop_filter, which is closer to the
VP8 syntax. This change is only cosmetics, but since this API
is exposed to userspace, it's worth the trouble to get it consistent.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
It doesn't seem to add any clarity to have a "header" suffix in controls,
struct names and flags.
Since this just makes names too long without any benefit, just drop it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add a control to enable inserting of AUD NALU into encoded
bitstream.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Deprecate mfc private display delay and display enable controls for
new clients and use the standard controls instead.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Make display delay and display delay enable MFC controls standard v4l
controls. This will allow reuse of the controls for other decoder
drivers. Also the new proposed controls are now codec agnostic because
they could be used for any codec.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the basic policies of the media subsystem profile.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add devicetree binding documentation for the FriendlyARM NanoPi R4S.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210319051627.814-1-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
dw_hdmi.txt has been replaced with synopsys,dw-hdmi.yaml, and all
references to the old file have been converted. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Replace the reference to the DWC HDMI text DT binding with a reference
to the YAML equivalent.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
|
|
Convert the Rockchip HDMI TX text binding to YAML.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Convert the i.MX6 HDMI TX text binding to YAML.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Convert the Renesas R-Car DWC HDMI TX text binding to YAML.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Add a .yaml schema containing the common properties for the Synopsys
DesignWare HDMI TX controller. This isn't a full device tree binding
specification, but is meant to be referenced by platform-specific
bindings for the IP core.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Convert the Renesas R-Car DU text binding to YAML.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Add bindings for TI BQ78Z100. An I2C interface gas gauge.
It provides a fully integrated safety protection
and authentication for 1 to 2-series cell Li-Ion and
Li-Polymer battery packs.
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
On some newer Thinkpads we need to set SAR value based on antenna type.
This patch provides a sysfs interface that userspace can use to get
antenna type and set corresponding SAR value, as is required for FCC
certification.
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Link: https://lore.kernel.org/r/20210317024636.356175-1-njoshi1@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Document the device tree bindings of the rockchip Rk3568 SoC
clock driver in Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210315085608.16010-2-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Some Atmel touchscreen controllers have a WAKE line that needs to be
asserted low in order to wake up controller from a deep sleep. Document
the wakeup methods and the new GPIO properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210302102158.10533-2-digetx@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
s/subsytem/subsystem/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"Fixes for kvm on x86:
- new selftests
- fixes for migration with HyperV re-enlightenment enabled
- fix RCU/SRCU usage
- fixes for local_irq_restore misuse false positive"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
documentation/kvm: additional explanations on KVM_SET_BOOT_CPU_ID
x86/kvm: Fix broken irq restoration in kvm_wait
KVM: X86: Fix missing local pCPU when executing wbinvd on all dirty pCPUs
KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ish
selftests: kvm: add set_boot_cpu_id test
selftests: kvm: add _vm_ioctl
selftests: kvm: add get_msr_index_features
selftests: kvm: Add basic Hyper-V clocksources tests
KVM: x86: hyper-v: Don't touch TSC page values when guest opted for re-enlightenment
KVM: x86: hyper-v: Track Hyper-V TSC page status
KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs
KVM: x86: hyper-v: Limit guest to writing zero to HV_X64_MSR_TSC_EMULATION_STATUS
KVM: x86/mmu: Store the address space ID in the TDP iterator
KVM: x86/mmu: Factor out tdp_iter_return_to_root
KVM: x86/mmu: Fix RCU usage when atomically zapping SPTEs
KVM: x86/mmu: Fix RCU usage in handle_removed_tdp_mmu_page
|
|
Pull sound fixes from Takashi Iwai:
"The majority of changes are various ASoC device/platform-specific
small fixes (including a removal of stale file) while the only common
change is a clk management fix in ASoC simple-card driver.
The rest are the usual HD-audio quirks"
* tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits)
ALSA: usb-audio: Fix unintentional sign extension issue
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms
ASoC: rt711: add snd_soc_component remove callback
ASoC: rt5659: Update MCLK rate in set_sysclk()
ASoC: simple-card-utils: Do not handle device clock
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge
ALSA: dice: fix null pointer dereference when node is disconnected
ALSA: hda: generic: Fix the micmute led init state
ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
spi: cadence: set cqspi to the driver_data field of struct device
ASoC: SOF: intel: fix wrong poll bits in dsp power down
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: remove remnants of sirf prima/atlas audio codec
...
|
|
Currently the pGp only shows the names of page flags, rather than
the full information including section, node, zone, last cpupid and
kasan tag. While it is not easy to parse these information manually
because there're so many flavors. Let's interpret them in pGp as well.
To be compitable with the existed format of pGp, the new introduced ones
also use '|' as the separator, then the user tools parsing pGp won't
need to make change, suggested by Matthew. The new information is
tracked onto the end of the existed one.
On example of the output in mm/slub.c as follows,
- Before the patch,
[ 6343.396602] Slab 0x000000004382e02b objects=33 used=3 fp=0x000000009ae06ffc flags=0x17ffffc0010200(slab|head)
- After the patch,
[ 8448.272530] Slab 0x0000000090797883 objects=33 used=3 fp=0x00000000790f1c26 flags=0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
The documentation and test cases are also updated. The output of the
test cases as follows,
[68599.816764] test_printf: loaded.
[68599.819068] test_printf: all 388 tests passed
[68599.830367] test_printf: unloaded.
[lkp@intel.com: reported issues in the prev version in test_printf.c]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: kernel test robot <lkp@intel.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210319101246.73513-4-laoar.shao@gmail.com
|
|
We are applying further, lower-prio fixes on top of two ww_mutex fixes in locking/urgent.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The ioctl KVM_SET_BOOT_CPU_ID fails when called after vcpu creation.
Add this explanation in the documentation.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210319091650.11967-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Describe the /proc/PID/loginuid interface in Documentation/ABI/stable that
was added 2008-03-13 in commit 1e0bd7550ea9 ("[PATCH] export sessionid
alongside the loginuid in procfs")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Describe the /proc/PID/loginuid interface in Documentation/ABI/stable that
was added 2005-02-01 by commit 1e2d1492e178 ("[PATCH] audit: handle
loginuid through proc")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Pull xfs fixes from Darrick Wong:
"A couple of minor corrections for the new idmapping functionality, and
a fix for a theoretical hang that could occur if we decide to abort a
mount after dirtying the quota inodes.
Summary:
- Fix quota accounting on creat() when id mapping is enabled
- Actually reclaim dirty quota inodes when mount fails
- Typo fixes for documentation
- Restrict both bulkstat calls on idmapped/namespaced mounts"
* tag 'xfs-5.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: also reject BULKSTAT_SINGLE in a mount user namespace
docs: ABI: Fix the spelling oustanding to outstanding in the file sysfs-fs-xfs
xfs: force log and push AIL to clear pinned inodes when aborting mount
xfs: fix quota accounting when a mount is idmapped
|
|
Fix a plethora of issues with MSR filtering by installing the resulting
filter as an atomic bundle instead of updating the live filter one range
at a time. The KVM_X86_SET_MSR_FILTER ioctl() isn't truly atomic, as
the hardware MSR bitmaps won't be updated until the next VM-Enter, but
the relevant software struct is atomically updated, which is what KVM
really needs.
Similar to the approach used for modifying memslots, make arch.msr_filter
a SRCU-protected pointer, do all the work configuring the new filter
outside of kvm->lock, and then acquire kvm->lock only when the new filter
has been vetted and created. That way vCPU readers either see the old
filter or the new filter in their entirety, not some half-baked state.
Yuan Yao pointed out a use-after-free in ksm_msr_allowed() due to a
TOCTOU bug, but that's just the tip of the iceberg...
- Nothing is __rcu annotated, making it nigh impossible to audit the
code for correctness.
- kvm_add_msr_filter() has an unpaired smp_wmb(). Violation of kernel
coding style aside, the lack of a smb_rmb() anywhere casts all code
into doubt.
- kvm_clear_msr_filter() has a double free TOCTOU bug, as it grabs
count before taking the lock.
- kvm_clear_msr_filter() also has memory leak due to the same TOCTOU bug.
The entire approach of updating the live filter is also flawed. While
installing a new filter is inherently racy if vCPUs are running, fixing
the above issues also makes it trivial to ensure certain behavior is
deterministic, e.g. KVM can provide deterministic behavior for MSRs with
identical settings in the old and new filters. An atomic update of the
filter also prevents KVM from getting into a half-baked state, e.g. if
installing a filter fails, the existing approach would leave the filter
in a half-baked state, having already committed whatever bits of the
filter were already processed.
[*] https://lkml.kernel.org/r/20210312083157.25403-1-yaoyuan0329os@gmail.com
Fixes: 1a155254ff93 ("KVM: x86: Introduce MSR filtering")
Cc: stable@vger.kernel.org
Cc: Alexander Graf <graf@amazon.com>
Reported-by: Yuan Yao <yaoyuan0329os@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210316184436.2544875-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
USB4 inter-domain spec mandates that the compatible hosts expose a new
property "maxhopid" that tells the connection manager on the other side
what is the maximum supported input HopID over the connection. Since
this is depend on the lane adapter the cable is connected it needs to be
filled in dynamically.
For this reason we take a copy of the global properties and fill then
for each XDomain connection upon first connect, and then keep updating
it if the generation changes as services are being added/removed. We
also take advantage of this copy to fill in the hostname.
We also expose this maxhopid as an attribute under each XDomain device.
While there drop kernel-doc entry for property_lock which seems to be
left there when the structure was originally introduced.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
These are actually not needed as we already have similar entries that
apply to all devices on the Thunderbolt bus.
Cc: Isaac Hazan <isaac.hazan@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Introduce a firmware-name property, in order to be able to support
device/platform specific firmware for the wireless connectivity
subsystem; in line with other Qualcomm remoteproc drivers.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210312002441.3273183-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This is initial amplifier driver for rt1019.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210311025809.31852-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
s/drving/driving/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210313231850.17278-1-unixbhaskar@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new modem compatible string for Qualcomm QCS404 SoCs
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1611859695-11824-3-git-send-email-gokulsri@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In converting intel-iommu over to the common IOMMU DMA ops, it quietly
lost the functionality of its "forcedac" option. Since this is a handy
thing both for testing and for performance optimisation on certain
platforms, reimplement it under the common IOMMU parameter namespace.
For the sake of fixing the inadvertent breakage of the Intel-specific
parameter, remove the dmar_forcedac remnants and hook it up as an alias
while documenting the transition to the new common parameter.
Fixes: c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/7eece8e0ea7bfbe2cd0e30789e0d46df573af9b0.1614961776.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This IOMMU module can be used by Unisoc's multimedia devices, such as
display, Image codec(jpeg) and a few signal processors, including
VSP(video), GSP(graphic), ISP(image), and CPP(camera pixel processor), etc.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210305093216.201897-2-zhang.lyra@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
BCM4334 was missing from the binding.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20210120124812.2800027-1-arnd@kernel.org/T/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132537.2285157-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|