| Age | Commit message (Collapse) | Author | Files | Lines |
|
The Sparx5 SDHCI controller is based on the Designware controller IP.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200825081357.32354-2-lars.povlsen@microchip.com
Link: https://lore.kernel.org/r/20200826130106.22889-1-lars.povlsen@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document SDHI controller for RZ/G2H (R8A774E1) SoC, which is compatible
with R-Car Gen3 SoC family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200809192001.19156-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add binding documentation for mmc host controllers present on
TI's J7200 SOC
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200802070114.9624-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The GISB arbiter can have a third and optional interrupt to handle GISB
breakpoints.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add entry for i.MX8MM DDR4 EVK board and update
the comments for imx8mm-evk as it is populated
with LPDDR4.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds a compatible string for the Tolino Shine 2 HD eBook reader.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull Kbuild fixes from Masahiro Yamada:
- fix documents
- fix warning in 'make localmodconfig'
* tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove redundant assignment prompt = prompt
kbuild: Documentation: clean up makefiles.rst
kconfig: streamline_config.pl: check defined(ENV variable) before using it
Documentation/llvm: Improve formatting of commands, variables, and arguments
|
|
Pull power management fixes from Rafael Wysocki:
"These fix reference counting in the operating performance points (OPP)
framework and address a few intel_pstate driver issues, mostly related
to switching driver operation modes and similar with hardware-managed
P-states (HWP) enabled.
Specifics:
- Fix reference counting of operating performance points (OPP) tables
(Viresh Kumar).
- Address intel_pstate driver interface issues, mostly related to
switching operation modes and handling CPU offline and online and
system-wide suspend/resume with hardware-managed P-states (HWP)
enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez)"
* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
opp: Don't drop reference for an OPP table that was never parsed
|
|
Pull sound fixes from Takashi Iwai:
"A collection of small changes, nothing intrusive:
- remaining tasklet API conversions, now all sound stuff have been
converted
- a few HD-audio and USB-audio quirks and minor fixes
- FireWire Tascam and Digi00xx fixes
- drop a kernel WARNING from PCM OSS for syzkaller"
* tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
ALSA: hda: use consistent HDAudio spelling in comments/docs
ALSA: hda: add dev_dbg log when driver is not selected
ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
ALSA: hda: hdmi - add Rocketlake support
ALSA: ua101: convert tasklets to use new tasklet_setup() API
ALSA: usb-audio: convert tasklets to use new tasklet_setup() API
ASoC: txx9: convert tasklets to use new tasklet_setup() API
ASoC: siu: convert tasklets to use new tasklet_setup() API
ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API
ALSA: hdsp: convert tasklets to use new tasklet_setup() API
ALSA: riptide: convert tasklets to use new tasklet_setup() API
ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API
ALSA: firewire: convert tasklets to use new tasklet_setup() API
ALSA: core: convert tasklets to use new tasklet_setup() API
ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO
ALSA: hda/hdmi: always check pin power status in i915 pin fixup
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A
ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2
...
|
|
csd.2020.09.04a: CPU smp_call_function() torture tests.
|
|
The Sphinx 3.x upgrade broke a number of things in our special "cdomain"
module that are not easy to fix. For now, just disable that module for the
3.x build and put out a warning that the build will not be perfect.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Parse also optional power-domains property to fix dtbs_check warnings
like:
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dt.yaml: gpio@5d080000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-5-krzk@kernel.org
|
|
Allow parsing GPIO controller children nodes with GPIO hogs to fix
warning:
arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpio@30240000: 'wl-reg-on' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-4-krzk@kernel.org
|
|
The GPIO controller node can have gpio-ranges property. This fixes
dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000: 'gpio-ranges' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-3-krzk@kernel.org
|
|
DTSes with new i.MX 8 SoCs introduce their own compatibles so add them
to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000:
compatible:0: 'fsl,imx8mm-gpio' is not one of ['fsl,imx1-gpio', 'fsl,imx21-gpio', 'fsl,imx31-gpio', 'fsl,imx35-gpio', 'fsl,imx7d-gpio']
From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000:
compatible: ['fsl,imx8mm-gpio', 'fsl,imx35-gpio'] is too long
arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000:
compatible: Additional items are not allowed ('fsl,imx35-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-2-krzk@kernel.org
|
|
Document r8a774e1 xhci support. The driver will use the fallback
compatible string "renesas,rcar-gen3-xhci", therefore no driver
change is needed.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200828075019.541-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Memory Tagging Extension (part of the ARMv8.5 Extensions) provides
a mechanism to detect the sources of memory related errors which
may be vulnerable to exploitation, including bounds violations,
use-after-free, use-after-return, use-out-of-scope and use before
initialization errors.
Add Memory Tagging Extension documentation for the arm64 linux
kernel support.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Will Deacon <will@kernel.org>
|
|
The BD718(37/47/50) regulator enable states can be controlled either by SW
or by PMIC internal state machine.
On some systems mixture of SW and HW state machine controlled regulators is
needed.
Specifically, some SoCs signal SUSPEND state change to PMIC via
STBY_REQ line. Now there are setups that expect certain regulators then to
be disabled (by PMIC state machine) while other regulators should stay
enabled (regardless of HW state => SW control required).
Add a new device-tree property "rohm,no-regulator-enable-control" which can
be used to leave regulator(s) under HW state machine control.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/51022c60412297ad9b22501452d60ba2dce38d2e.1599029334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The BD718(37/47/50) regulator enable states can be controlled either by SW
or by PMIC internal state machine.
On some systems mixture of SW and HW state machine controlled regulators is
needed.
Specifically, some SoCs signal SUSPEND state change to PMIC via
STBY_REQ line. Now there are setups that expect certain regulators then to
be disabled (by PMIC state machine) while other regulators should stay
enabled (regardless of HW state => SW control required).
Add a new device-tree property "rohm,no-regulator-enable-control" which can
be used to leave regulator(s) under HW state machine control.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/9ff1104579093e7977944be769d625b9e33bc663.1599029334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As stated in https://sourceforge.net/projects/fuse/, "the FUSE project has
moved to https://github.com/libfuse/" in 22-Dec-2015. Update URLs to
reflect this.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Usage of "unevaluatedProperties: false" is not correct as it suppresses
warnings about all undocumented properties. Instead, add all missing
properties.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903203250.19830-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Usage of "unevaluatedProperties: false" is not correct as it suppresses
warnings about all undocumented properties. Instead, add all missing
properties.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903203250.19830-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document RZ/G1H (R8A7742) SoC bindings.
No driver change is needed due to the fallback compatible value
"renesas,ipmmu-vmsa".
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200825141805.27105-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Sort the items in the compatible string list in increasing number of SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200809193527.19659-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
|
|
Describe the two possible clocks feeding into the Broadcom SF2
integrated Ethernet switch. BCM7445 systems have two clocks, one for the
main switch core clock, and another for controlling the switch clock
divider whereas BCM7278 systems only have the first kind.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Broadcom SYSTEMPORT adapters require the use of two clocks for
normal operations and during Wake-on-LAN, document those in the binding
document.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Git is fairly ubiquitous these days, and the additional information in
this documentation for preparing patches without it is not especially
relevant anymore and may serve to confuse new contributors.
The git request-pull comments were also removed, given that it is not a
tool well-suited to novice contributors, nor do maintainers especially
appreciate receiving unexpected request-pulls from new contributors.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Link: https://lore.kernel.org/r/20200903160545.83185-5-sir@cmpwn.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The repeated sign-offs necessary when a subsystem maintainer modifies an
incoming patch has been moved from submitting-patches.rst to
Documentation/maintainer, since the affairs of a subsystem maintainer
are not especially relevant to someone reading a guide for how to submit
their first patch.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Link: https://lore.kernel.org/r/20200903160545.83185-4-sir@cmpwn.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This adds a link to https://useplaintext.email to email-clients.rst,
which is a more exhaustive resource on configuring various mail clients
for plain text use. submitting-patches.rst is also updated to direct
readers to email-clients.rst to equip new contributors with the
requisite knowledge to become a good participant on the mailing lists.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200903160545.83185-3-sir@cmpwn.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This follows similar changes throughout Documentation; these numbers
tend to get outdated and are not especially useful.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Link: https://lore.kernel.org/r/20200903160545.83185-2-sir@cmpwn.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Update text and examples in the "Cross-referencing from
reStructuredText" section to reflect that no additional syntax is needed
anymore.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Link: https://lore.kernel.org/r/20200903005747.3900333-3-nfraprado@protonmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
In order to cross-reference C types in the documentation, Sphinx
requires the syntax :c:type:`type_name`, or even :c:type:`struct
type_name <type_name>` in order to have the link text different from the
target text.
Extend automarkup to enable automatic cross-reference of C types by
matching any "struct|union|enum|typedef type_name" expression.
This makes the documentation's plain text cleaner and adds
cross-reference to types without any additional effort by the author.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Link: https://lore.kernel.org/r/20200903005747.3900333-2-nfraprado@protonmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Drops the deprecated compatibles without the vendor name.
Whilst the driver continues to support these for old dt blobs,
any dt bindings that are actuallly verified against this document should
be fixed to add the vendor name.
Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Oskar Andero <oskar.andero@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-2-jic23@kernel.org
|
|
Simple binding so easy to convert.
Dropped the stated value of maximum spi bus frequency as it does
not seem to correspond to the datasheet. The value of 200kHz
is the max sampling frequency of the ADC, not the clock frequency of
the SPI bus.
Added #io-channel-cells to allow use as a provider of channels to
other devices via the consumer binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-By: Phil Reid <preid@electromag.com.au>
Cc: Phil Reid <preid@electromag.com.au>
Link: https://lore.kernel.org/r/20200809111753.156236-14-jic23@kernel.org
|
|
JC: Seems that I messed up applying the original driver patches, and
this file never actually made it into the tree.
I have picked up original Ack and Sign-off so as to record the
history.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200809111753.156236-13-jic23@kernel.org
|
|
Simple binding so easy to convert.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200809111753.156236-12-jic23@kernel.org
|
|
Simple binding. Only addition to txt version is
as a provider of channels to other devices using the consumer
binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-10-jic23@kernel.org
|
|
Simple binding conversion of this SPI ADC binding, with reference
voltage.
Added the optional property #io-channel-cells to allow for
consumers of channels if that makes sense for a given board.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-7-jic23@kernel.org
|
|
Simple conversion for this ADC driver. Note that I haven't put
limits on the spi-max-sampling-frequency because the adc161s626
doesn't state one clearly defined value.
Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200809111753.156236-6-jic23@kernel.org
|
|
Very simple binding for this i2c device with a reference supply.
Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20200809111753.156236-5-jic23@kernel.org
|
|
Very simple conversion of spi device with reference supply.
Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20200809111753.156236-4-jic23@kernel.org
|
|
These i2c devices have simple bindings, well described by trivial-device.yaml
so rather than convert the binding doc to yaml, let us just add them to
trivial devices and drop the old binding document.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-3-jic23@kernel.org
|
|
Document use of additional trigger supplied by driver.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200810093257.65929-3-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Change "[w|W]hat[:| ]" to What: for consistency.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20200828233156.2264689-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Conversion of the ltc2632 to yaml format and name the file to
'lltc,ltc2632.yaml'.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The driver for the as73211 light sensor provides the following not yet
documented sysfs entries:
- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale
- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This fixes some typos found while browsing the documentation.
Cc: trivial@kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|