| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 0b0393d59eb4a ("media: uapi: h264: clarify
expected scaling_list_4x4/8x8 order") improved the
documentation on H264 scaling lists order.
This commit improves the documentation by clarifying
that the lists themselves are expected in raster scan order.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When dealing with interlaced frames, reference lists must tell if
each particular reference is meant for top or bottom field. This info
is currently not provided at all in the H264 related controls.
Change reference lists to hold a structure, which specifies
an index into the DPB array and the field/frame specification
for the picture.
Currently the only user of these lists is Cedrus which is just compile
fixed here. Actual usage of will come in a following commit.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
While we have had some example drivers, there has been up to date no
formal documentation on how camera sensor drivers should be written; what
are the practices, why, and where they apply.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix improper line breaks and format all example yavta and media-ctl
commands as code blocks to improve readability.
Signed-off-by: Jordan Hand <jorhand@linux.microsoft.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the optional clock-noncontinuous endpoint property that
allows enabling MIPI CSI-2 non-continuous clock operations.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document in dt-schema bindings for the ov5647 sensor the optional
'pwdn-gpios' property.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Convert the ov5647 image sensor bindings to DT schema and add
the file entry to MAINTAINERS.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The parallel port nodes should be numbered 1 and 2, not 0 and 1
for A and B respectively. The driver has always implemented 1
and 2 and the in-tree Goni DTS uses 1 as port A as well. Update
the documentation to match this behaviour.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
/proc/cpuinfo shows features which the kernel supports. Some of these
flags are derived from CPUID, and others are derived from other sources,
including some that are entirely software-based. Currently, there is
not any documentation in the kernel about how /proc/cpuinfo flags are
generated and what it means when they are missing.
Add documentation for /proc/cpuinfo feature flags enumeration.
Document how and when x86 feature flags are used. Also discuss what
their presence or absence mean for the kernel and users.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Co-developed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200831183500.15481-1-kyung.min.park@intel.com
|
|
/home/rdunlap/lnx/lnx-59-rc2/Documentation/driver-api/dma-buf.rst:182: WARNING: Title underline too short.
Indefinite DMA Fences
~~~~~~~~~~~~~~~~~~~~
Fixes: 72b6ede73623 ("dma-buf.rst: Document why indefinite fences are a bad idea")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1b22d4c3-4ea5-c633-9e35-71ce65d8dbcc@infradead.org
|
|
Right now, drivers like ARM SMMU are using dma_alloc_coherent() to get
coherent DMA buffers to save their command queues and page tables. As
there is only one default CMA in the whole system, SMMUs on nodes other
than node0 will get remote memory. This leads to significant latency.
This patch provides per-numa CMA so that drivers like SMMU can get local
memory. Tests show localizing CMA can decrease dma_unmap latency much.
For instance, before this patch, SMMU on node2 has to wait for more than
560ns for the completion of CMD_SYNC in an empty command queue; with this
patch, it needs 240ns only.
A positive side effect of this patch would be improving performance even
further for those users who are worried about performance more than DMA
security and use iommu.passthrough=1 to skip IOMMU. With local CMA, all
drivers can get local coherent DMA buffers.
Also, this patch changes the default CONFIG_CMA_AREAS to 19 in NUMA. As
1+CONFIG_CMA_AREAS should be quite enough for most servers on the market
even they enable both hugetlb_cma and pernuma_cma.
2 numa nodes: 2(hugetlb) + 2(pernuma) + 1(default global cma) = 5
4 numa nodes: 4(hugetlb) + 4(pernuma) + 1(default global cma) = 9
8 numa nodes: 8(hugetlb) + 8(pernuma) + 1(default global cma) = 17
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Greg has challenged some recent driver submitters on their license
choices. He was correct to do so, as the choices in these instances
did not always advance the aims of the submitters.
But, this left submitters (and the folks who help them pick licenses)
a bit confused. They have read things like
Documentation/process/license-rules.rst which says:
individual source files can have a different license
which is required to be compatible with the GPL-2.0
and Documentation/process/submitting-drivers.rst:
We don't insist on any kind of exclusive GPL licensing,
and if you wish ... you may well wish to release under
multiple licenses.
As written, these appear a _bit_ more laissez faire than we've been in
practice lately. It sounds like we at least expect submitters to make
a well-reasoned license choice and to explain their rationale. It does
not appear that we blindly accept anything that is simply
GPLv2-compatible.
Drivers appear to be the most acute source of misunderstanding, so fix
the driver documentation first. Update it to clarify expectations.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <h.peter.anvin@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200814145625.8B708079@viggo.jf.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It's now gone from the kernel so remove it from the deprecated API text.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/5e10c1645dd8f735215cf54a74db0f8dd3f6cbd5.camel@perches.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Based on a vote at the LLVM BoF at Plumbers 2020, we decided to start
small, supporting just one formal upstream release of LLVM for now.
We can probably widen the support window of supported versions over
time. Also, note that LLVM's release process is different than GCC's.
GCC tends to have 1 major release per year while releasing minor updates
to the past 3 major versions. LLVM tends to support one major release
and one minor release every six months.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200826191555.3350406-1-ndesaulniers@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The submitting patches mentions criteria for a fix to be called
"security fix". Add a link to document explaining the entire process
of handling security bugs.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Felipe Balbi <balbi@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200827105319.9734-1-krzk@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
While the xensource.com URLs referenced still exist, neither the Xen or Linux
2.6.18 fork have been touched since 2009, 11 years ago. Other URLs are dead.
IA64 support was removed in Xen 4.2, in 2012. Relegate this piece of
documentation to source history.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/r/20200827175405.24344-1-andrew.cooper3@citrix.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate this commit to Korean:
3e79f082ebfc ("libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier")
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Yunjae Lee <lyj7694@gmail.com>
Link: https://lore.kernel.org/r/20200829084027.4591-1-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate this commit to Korean:
a897b13d1b77 ("docs/memory-barriers.txt: Remove remaining references to mmiowb()")
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Yunjae Lee <lyj7694@gmail.com>
Link: https://lore.kernel.org/r/20200829082607.3146-3-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 985098a05eee ("docs: fix references for DMA*.txt files") missed
fixing memory-barriers.txt file. This commit applies the change to the
file.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Link: https://lore.kernel.org/r/20200829082607.3146-2-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The sentence regarding version numbers of '-stable' kernels is quite
ambiguous. This commit makes the sentence more clear and fix
inconsistent uses of the terms for 'version'.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Link: https://lore.kernel.org/r/20200829082343.2979-3-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate this commit to Korean:
fb0e0ffe7fc8 ("Documentation: bring process docs up to date")
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Link: https://lore.kernel.org/r/20200829082343.2979-2-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of documentation fixes for 5.9"
* tag 'docs-5.9-3' of git://git.lwn.net/linux:
Documentation: laptops: thinkpad-acpi: fix underline length build warning
Documentation: fix typo for abituguru documentation
docs: Fix function name trailing double-()s
devices.txt: fix typo of "ubd" as "udb"
Documentation: add riscv entry in list of existing profiles
MAINTAINERS: mention documentation maintainer entry profile
Fpga: Documentation: Replace deprecated :c:func: Usage
IIO: Documentation: Replace deprecated :c:func: Usage
Documentation/locking/locktypes: fix local_locks documentation
|
|
Add documentation for the XDP_SHARED_UMEM feature when a UMEM is
shared between different queues and/or netdevs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-16-git-send-email-magnus.karlsson@intel.com
|
|
Pull MMC fixes from Ulf Hansson:
- Fix HS400 tuning for ACPI ID AMDI0040
- Fix reset of CQHCI for Intel GLK-based controllers
- Use correct timeout clock for Tegra186/194/210
- Fix eMMC mounting on mt7622/Bpi-64
* tag 'mmc-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
sdhci: tegra: Add missing TMCLK for data timeout
arm64: tegra: Add missing timeout clock to Tegra194 SDMMC nodes
arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes
arm64: tegra: Add missing timeout clock to Tegra210 SDMMC
dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210
arm64: dts: mt7622: add reset node for mmc device
dt-bindings: mmc: Add missing description for clk_in/out_sd1
mmc: mediatek: add optional module reset property
mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindings
mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers
mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040
|
|
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add DT bindings for PHY interface built into ahci controller implemented
in UniPhier SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1598352071-26675-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
While reviewing a separate patch, I noticed that the formatting of the
commands, variables, and arguments was not in a monospaced font like the
rest of the Kbuild documentation (see kbuild/kconfig.rst for an
example). This is due to a lack of "::" before indented command blocks
and single backticks instead of double backticks for inline formatting.
Add those so that the document looks nicer in an HTML format, while not
ruining the look in plain text.
As a result of this, we can remove the escaped backslashes in the last
code block and move them to single backslashes.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The basic permission bits (protection bits in AmigaOS) have been broken
in Linux' AFFS - it would only set bits, but never delete them.
Also, contrary to the documentation, the Archived bit was not handled.
Let's fix this for good, and set the bits such that Linux and classic
AmigaOS can coexist in the most peaceful manner.
Also, update the documentation to represent the current state of things.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add "fsl,imx8mp-usb-phy" compatible string for imx8mp usb phy, which is
similar with imx8mq usb phy but with some different customizations.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1598276014-2377-1-git-send-email-jun.li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add syscon compatibility with Vybrid OCOTP driver binding. This is
required to access the UID.
Fixes: 623069946952 ("nvmem: Add DT binding documentation for Vybrid OCOTP driver")
Signed-off-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add a binding for the Variscite Symphony evaluation kit board with
VAR-SOM-MX8MM System on Module.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add a binding for the Variscite VAR-SOM-MX8MM System on Module.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the binding for Zodiac Inflight Innovations Ultra Boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Toradex Colibri i.MX 8 Evaluation board has two Toradex compatibles
so it needs separate entry. This fixes dtbs_check warning:
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dt.yaml: /:
compatible: ['toradex,colibri-imx8x-eval-v3', 'toradex,colibri-imx8x', 'fsl,imx8qxp'] is not valid under any of the given schemas (Possible causes of the failure):
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dt.yaml: /: compatible: ['toradex,colibri-imx8x-eval-v3', 'toradex,colibri-imx8x', 'fsl,imx8qxp'] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add Zkmagic A95X Z2 description for a board with rk3318 processor.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200808160618.15445-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200808160618.15445-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
ROCKPi 4 has 3 variants of hardware platforms called
ROCKPi 4A, 4B, and 4C.
- ROCKPi 4A has no Wif/BT.
- ROCKPi 4B has AP6256 Wifi/BT, PoE.
- ROCKPi 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C
So, update the existing ROCKPi 4 binding to support
ROCKPi 4A/B/C hardware platforms.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200807094826.12019-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
|
|
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
|
|
Document the binding for Beacon EmbeddedWorks i.MX8M Mini Development
Kit board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd.
as part of panel-simple.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-1-jagan@amarulasolutions.com
|
|
The table of the flags of the structs
v4l2_pix_format(_mplane) is currently in pixfmt-reserved.rst
which is wrong, it should be in pixfmt-v4l2.rst
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Pull power management fixes from Rafael Wysocki:
"These fix the recently added Tegra194 cpufreq driver and the handling
of devices using runtime PM during system-wide suspend, improve the
intel_pstate driver documentation and clean up the cpufreq core.
Specifics:
- Make the recently added Tegra194 cpufreq driver use
read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting
logical_cpu_map (Sumit Gupta).
- Drop the automatic system wakeup event reporting for devices with
pending runtime-resume requests during system-wide suspend to avoid
spurious aborts of the suspend flow (Rafael Wysocki).
- Fix build warning in the intel_pstate driver documentation and
improve the wording in there (Randy Dunlap).
- Clean up two pieces of code in the cpufreq core (Viresh Kumar)"
* tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
PM: sleep: core: Fix the handling of pending runtime resume requests
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
|
|
* pm-cpufreq:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
|
|
The bindings for charger-manager were very unclear and didn't
specify allowable values in many cases. Clean these up to show
what each value does and make sure all properties are documented
here rather than using wildcards.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Document Renesas RZ/G2H (R8A774E1) GPIO blocks compatibility within the
relevant dt-bindings. R8A774E1 GPIO module is identical to R-Car Gen3
family.
No driver change is needed due to the fallback compatible value
"renesas,rcar-gen3-gpio".
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Add a dt binding for the TI dp83822 ethernet phy device.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Ezequiel Garcia
Jernej Skrabec
Sakari Ailus
Jordan Hand
Jacopo Mondi
Jacopo Mondi
Jonathan Bakker
Kyung Min Park
Randy Dunlap
Barry Song
Dave Hansen
Joe Perches
Nick Desaulniers
Krzysztof Kozlowski
Andrew Cooper
SeongJae Park
Linus Torvalds
Magnus Karlsson
Jason Gunthorpe
Kunihiko Hayashi
Nathan Chancellor
Max Staudt
Li Jun
Chris Healy
Greg Kroah-Hartman
Johan Jonker
Jagan Teki
Dafna Hirschfeld
Rafael J. Wysocki
Lad Prabhakar
Dan Murphy