| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The entries in arrays must have fixed order, so the bindings and Linux
driver expecting various combinations of 'reg' addresses was never
actually conforming to guidelines.
The 'core' reg entry is valid only for SDCC v4 and lower, so disallow it
in SDCC v5. SDCC v4 supports CQE and ICE, so allow them, even though
the qcom,sdhci-msm-v4 compatible is used also for earlier SoCs with SDCC
v2 or v3, so it is not entirely accurate.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220712144245.17417-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bindings before conversion to DT schema expected reg-names without
"_mem" suffix. This was used by older DTS files and by the MSM SDHCI
driver.
Reported-by: Douglas Anderson <dianders@chromium.org>
Fixes: edfbf8c307ff ("dt-bindings: mmc: sdhci-msm: Fix issues in yaml bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220712144245.17417-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
I need to have some vc4 patches merged in -rc4, but drm-misc-next is
only at -rc2 for now.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Stephen Rothwell reported the htmldocs warning:
Documentation/virt/kvm/api.rst:5959: WARNING: Title underline too short.
4.137 KVM_S390_ZPCI_OP
--------------------
The warning is due to subheading underline on KVM_S390_ZPCI_OP section is
short of 2 dashes.
Extend the underline to fix the warning.
Link: https://lore.kernel.org/linux-next/20220711205557.183c3b14@canb.auug.org.au/
Fixes: a0c4d1109d6cc5 ("KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220712092954.142027-4-bagasdotme@gmail.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Two cleanups
- Remove Joonyoung Shim from MAINTAINERS and relevant yaml files.
He left from Samsung so his email address isn't valid anymore.
Fixup
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712061008.199961-1-inki.dae@samsung.com
|
|
Next for v5.20
GPU:
- a619 support
- Fix for unclocked GMU register access
- Devcore dump enhancements
Core:
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
DPU:
- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes
DP:
- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change
MDP5:
- MSM8953 perf data
HDMI:
- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
|
|
Backmerge in rc6 so I can merge msm next easier.
Linux 5.19-rc6
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Rename the dt nodes shown in the sff,sfp.yaml examples so that they are
generic and not really tied to a specific platform.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the sff,sfp.txt bindings to the DT schema format.
Also add the new path to the list of maintained files.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7180 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-3-git-send-email-quic_sibis@quicinc.com
|
|
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7280 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-2-git-send-email-quic_sibis@quicinc.com
|
|
Qualcomm driver updates for v5.20
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
* tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: icc-bwmon: Add bandwidth monitoring driver
dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device
soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
soc: qcom: llcc: Fix syntax errors in comments
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
firmware: qcom_scm: Add bw voting support to the SCM interface
dt-bindings: firmware: qcom-scm: Add interconnects property
soc: qcom: cmd-db: replace strscpy_pad() with strncpy()
dt-bindings: firmware: scm: Add compatible for SDX65
dt-bindings: arm: qcom: switch maintainer to Bjorn
soc: qcom: rpmhpd: fix typos in comment
soc: qcom: correct kerneldoc
soc: qcom: cmd-db: replace strncpy() with strscpy_pad()
firmware: qcom_scm-legacy: correct kerneldoc
dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM
soc: qcom: apr: Drop redundant check in .remove()
firmware: qcom_scm: drop unexpected word "the"
soc: qcom: socinfo: Add an ID for sc7180P
Link: https://lore.kernel.org/r/20220712021830.1271398-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
TI Driver updates for v5.20
* pruss: Enable support for AM62, bindings cleanups
* wkup_m3_ipc: cosmetic cleanup
* tag 'ti-driver-soc-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: pruss: Enable support for PRUSS-M subsystem on K3 AM62x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM62x SoCs
dt-bindings: soc: ti: pruss: Re-arrange "compatible" in alphabetic order
soc: ti: wkup_m3_ipc: Remove unneeded semicolon
Link: https://lore.kernel.org/r/20220708232655.reqjdbib52ejdja4@unadvised
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
memory: tegra: Changes for v5.20-rc1
Add memory client definitions for the Multi-Gigabit Ethernet (MGBE)
controllers found on Tegra234.
* tag 'tegra-for-5.20-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add MGBE memory clients for Tegra234
dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB 2.0 binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 AXI2APB binding
dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB 1.0 binding
dt-bindings: memory: Add Tegra234 MGBE memory clients
dt-bindings: Add Tegra234 MGBE clocks and resets
dt-bindings: power: Add Tegra234 MGBE power domains
dt-bindings: Add headers for Tegra234 GPCDMA
Link: https://lore.kernel.org/r/20220708185608.676474-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull overlayfs fix from Miklos Szeredi:
"Add a temporary fix for posix acls on idmapped mounts introduced in
this cycle. A proper fix will be added in the next cycle"
* tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: turn off SB_POSIXACL with idmapped layers temporarily
|
|
pmic wrapper:
- code style improvements
devapc:
- add support for MT8186
Smart Voltage Scaling (SVS)
- add support for MT8183 and MT8192
MMSYS:
- Add more display paths for MT8365
Mutex:
- Add common interface for MOD and SOF table
- Add support for MDP on MT8183
- Move binding to soc folder
- Add support to use CMDQ to enable the mutex, needed by MDP3
Power domains:
- Add support for MT6795
* tag 'v5.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (29 commits)
soc: mediatek: mutex: Simplify with devm_platform_get_and_ioremap_resource()
soc: mediatek: pm-domains: Add support for Helio X10 MT6795
dt-bindings: power: Add MediaTek Helio X10 MT6795 power domains
soc: mediatek: SVS: Use DEFINE_SIMPLE_DEV_PM_OPS for svs_pm_ops
soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGs
soc: mediatek: fix missing clk_disable_unprepare() on err in svs_resume()
soc: mediatek: mutex: Use DDP_COMPONENT_DITHER0 mod index for MT8365
soc: mediatek: mutex: add functions that operate registers by CMDQ
dt-bindings: soc: mediatek: add gce-client-reg for MUTEX
dt-bindings: soc: mediatek: move out common module from display folder
soc: mediatek: mutex: add 8183 MUTEX MOD settings for MDP
soc: mediatek: mutex: add common interface for modules setting
soc: mediatek: pm-domains: Add support always on flag
soc: mediatek: mt8365-mmsys: add DPI/HDMI display path
soc: mediatek: mutex: add MT8365 support
soc: mediatek: SVS: add mt8192 SVS GPU driver
dt-bindings: soc: mediatek: add mt8192 svs dt-bindings
soc: mediatek: SVS: add debug commands
soc: mediatek: SVS: add monitor mode
soc: mediatek: SVS: introduce MTK SVS engine
...
Link: https://lore.kernel.org/r/b733bd82-6d99-23ef-0541-98e98eb8d3bc@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This commit adds dt-binding documentation of mmc for MediaTek MT8188 SoC
platform.
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708114747.13878-1-johnson.wang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit "mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC" added
support for utilizing a hardware reset and parsing it from DT, however
the bindings were not updated along with it.
So, document the usage of "resets" property with the limit of only one
item.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220704143554.1180927-1-robimarko@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the Samsung SoC SDHCI Controller bindings to DT schema.
The original bindings were quite old and incomplete, so add during
conversion typical (already used) properties like reg, clocks,
interrupts.
The bindings were not precising the clocks, although the upstream DTS
and Linux driver were expecting bus clocks in certain patterns in any
order. Document the status quo even though it is not a proper approach
for bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220626120342.38851-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The patch enabling generic Gen4 support forgot to add the clock
requirements which are the same as for Gen3. Update the binding.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220608122344.3431-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220608094831.8242-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220603233810.21972-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the mmc-spi-slot text based binding doc to yaml,
with the side effect of cleaning up some of the riscv
dtbs_check warnings.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220606201343.514391-2-mail@conchuod.ie
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the compatible for Samsung Exynos5420 SoC Synopsys Designware
MSHC with SMU, already used in DTS and driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220605163710.144210-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the Samsung Exynos SoC specific extensions to the Synopsys
Designware Mobile Storage Host Controller to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220605163710.144210-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The 72116B0 has improved SDIO controllers that allow the max clock
rate to be increased from a max of 100MHz to a max of 150MHz.
Optional "sdio_freq" clock is used to drive the bus clock if present
optional property "clock-frequency" specifies a base clock frequency
in Hz that overrides the base clock frequency in the CAPS registers.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220520183108.47358-2-kdasu.kdev@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Rob pointed some remaining issues in the sdhci-msm yaml
bindings (via [1]).
Fix the same by first using the 'mmc-controller.yaml' as
'ref' and thereafter also fix the issues reported by
'make dtbs_check' check.
[1]. https://lore.kernel.org/linux-arm-msm/YnLmNCwNfoqZln12@robh.at.kernel.org/
Fixes: a45537723f4b ("dt-bindings: mmc: sdhci-msm: Convert bindings to yaml")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220514220116.1008254-1-bhupesh.sharma@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Should the need for toolchain mitigations ever be necessary, add a group
for toolchain ambassadors.
Add Nick Desaulniers as LLVM's ambassador for the embargoed hardware
issues process.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220711181101.1559558-1-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Mediatek DRM Next for Linux 5.20
1. Add Mediatek Soc DRM (vdosys0) support for mt8195
2. Cooperate with DSI RX devices to modify dsi funcs and delay mipi high to cooperate with panel sequence
3. Add mt8186 dsi compatible and convert dsi_dtbinding to .yaml
4. Add MediaTek SoC DRM (vdosys1) support for mt8195
5. Add MT8195 dp_intf driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix drm_edid.h include]
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220709142021.24260-1-chunkuang.hu@kernel.org
|
|
To support path tag in icc-rpm driver, the "#interconnect-cells"
property is updated as enumerate values: 1 or 2. Setting to 1 means
it is compatible with old DT binding that interconnect path only
contains node id; if set to 2 for "#interconnect-cells" property, then
the second specifier is used as a tag (e.g. vote for which buckets).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-2-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
drm/tegra: Changes for v5.20-rc1
The bulk of these changes adds support for context isolation for the
various supported host1x engines, as well as support for the hardware
found on the new Tegra234 SoC generation.
There's also a couple of fixes and cleanups. To round things off, the
device tree bindings are converted to the new json-schema format that
allows DTBs to be validated.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708181136.673789-1-thierry.reding@gmail.com
|
|
In case security is enabled on the device, some debugfs nodes will
fail. Hence, we do not expose them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add the ASIC-specific code for Gaudi2. Supply (almost) all of the
function callbacks that the driver's common code need to initialize,
finalize and submit workloads to the Gaudi2 ASIC.
It also contains the code to initialize the F/W of the Gaudi2 ASIC
and to receive events from the F/W.
It contains new debugfs entry to dump razwi events. razwi is a case
where the device's engines create a transaction that reaches an
invalid destination.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In the callback scrub_device_mem, use 'memory_scrub_val'
from debugfs for the scrubbing value.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so remove him from maintainers of DT bindings (display,
phy).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* crtc: Remove unnessary include statements from drm_crtc.h, plus
fallout in drivers
* edid: More use of struct drm_edid; implement HF-EEODB extension
Driver Changes:
* bridge:
* anx7625: Implement HDP timeout via callback; Cleanups
* fsl-ldb: Drop DE flip; Modesetting fixes
* imx: Depend on ARCH_MXC
* sil8620: Fix off-by-one
* ti-sn65dsi86: Convert to atomic modesetting
* ingenic: Fix display at maximum resolution
* panel:
* simple: Add support for HannStar HSD101PWW2, plus DT bindings; Add
support for ETML0700Y5DHA, plus DT bindings
* rockchip: Fixes
* vc4: Cleanups
* vmwgfx: Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YsaHq1pvE699NtOM@linux-uq9g
|
|
As discussed with Maxim add a counter for true NoPad violations.
This should help deployments catch unexpected padded records vs
just control records which always need re-encryption.
https: //lore.kernel.org/all/b111828e6ac34baad9f4e783127eba8344ac252d.camel@nvidia.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull x86 retbleed fixes from Borislav Petkov:
"Just when you thought that all the speculation bugs were addressed and
solved and the nightmare is complete, here's the next one: speculating
after RET instructions and leaking privileged information using the
now pretty much classical covert channels.
It is called RETBleed and the mitigation effort and controlling
functionality has been modelled similar to what already existing
mitigations provide"
* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
x86/speculation: Disable RRSBA behavior
x86/kexec: Disable RET on kexec
x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
x86/bugs: Add Cannon lake to RETBleed affected CPU list
x86/retbleed: Add fine grained Kconfig knobs
x86/cpu/amd: Enumerate BTC_NO
x86/common: Stamp out the stepping madness
KVM: VMX: Prevent RSB underflow before vmenter
x86/speculation: Fill RSB on vmexit for IBRS
KVM: VMX: Fix IBRS handling after vmexit
KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
KVM: VMX: Convert launched argument to flags
KVM: VMX: Flatten __vmx_vcpu_run()
objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
x86/speculation: Remove x86_spec_ctrl_mask
x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
x86/speculation: Fix SPEC_CTRL write on SMT state change
x86/speculation: Fix firmware entry SPEC_CTRL handling
x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
...
|
|
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is
deprecated. Convert sample code to the generic power management framework.
Link: https://lore.kernel.org/r/20220607232946.355987-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Make any kselftest test module (using the kselftest_module framework)
taint the kernel with TAINT_TEST on module load.
Also mark the module as a test module using MODULE_INFO(test, "Y") so
that other tools can tell this is a test module. We can't rely solely
on this, though, as these test modules are also often built-in.
Finally, update the kselftest documentation to mention that the kernel
should be tainted, and how to do so manually (as below).
Note that several selftests use kernel modules which are not based on
the kselftest_module framework, and so will not automatically taint the
kernel.
This can be done in two ways:
- Moving the module to the tools/testing directory. All modules under
this directory will taint the kernel.
- Adding the 'test' module property with:
MODULE_INFO(test, "Y")
Similarly, selftests which do not load modules into the kernel generally
should not taint the kernel (or possibly should only do so on failure),
as it's assumed that testing from user-space should be safe. Regardless,
they can write to /proc/sys/kernel/tainted if required.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Without the quoting, the example will mess up invocations like
$ run_kunit "Something with spaces"
Note: this example isn't valid, but if ever a usecase arises where a
flag argument might have spaces in it, it'll break.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Channel events adopt the newly centralized 'linux,code' property;
slider events should too.
Fixes: 8ac14d2c2d81 ("dt-bindings: input: Centralize 'linux,code' definition")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220710024713.17275-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the arm,arm-firmware-suite partition binding to DT schema
format. Simple conversion as there's only a compatible property.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220629185031.23826-1-robh@kernel.org
|
|
Add a new bindings to describe ums512 clock compatible string.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220505101433.1575096-2-gengcixi@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull module fixes from Luis Chamberlain:
"Although most of the move of code in in v5.19-rc1 should have not
introduced a regression patch review on one of the file changes
captured a checkpatch warning which advised to use strscpy() and it
caused a buffer overflow when an incorrect length is passed.
Another change which checkpatch complained about was an odd RCU usage,
but that was properly addressed in a separate patch to the move by
Aaron. That caused a regression with PREEMPT_RT=y due to an unbounded
latency.
This series fixes both and adjusts documentation which we forgot to do
for the move"
* tag 'modules-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RT
doc: module: update file references
module: Fix "warning: variable 'exit' set but not used"
module: Fix selfAssignment cppcheck warning
modules: Fix corruption of /proc/kallsyms
|
|
Cortex A78AE's MPIDR has been added since
commit 83bea32ac7ed ("arm64: Add part number for Arm Cortex-A78AE")
We also need to add the compatible.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220707082753.28862-1-chanho61.park@samsung.com
|
|
Fixed string property names should be under 'properties' rather than
'patternProperties'. Additionally, without beginning and end of line
anchors, any prefix or suffix is allowed on the specified property names.
As all the nvidia,tegra20-pmc powergates child node properties are fixed
strings, change 'patternProperties' to 'properties'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220706212034.568861-1-robh@kernel.org
|
|
Suzuki writes:
CoreSight self-hosted tracing changes for v5.20.
- Fixes LOCKDEP warnings on module unload with configfs
- Conversion of DT bindings to DT schema
- Branch broadcast support for perf cs_etm
- Etm4x driver fixes for build failures with Clang and unrolled loops
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: avoid build failure with unrolled loops
Documentation: coresight: Expand branch broadcast documentation
Documentation: coresight: Link config options to existing documentation
Documentation: coresight: Turn numbered subsections into real subsections
coresight: Add config flag to enable branch broadcast
Documentation: coresight: Escape coresight bindings file wildcard
dt-bindings: arm: Convert CoreSight CPU debug to DT schema
dt-bindings: arm: Convert CoreSight bindings to DT schema
dt-bindings: arm: Rename Coresight filenames to match compatible
coresight: syscfg: Update load and unload operations
coresight: configfs: Fix unload of configurations on module exit
coresight: Clear the connection field properly
|
|
Add a module.async_probe kernel command line option that allows enabling
async probing for all modules. When this command line option is used,
there might still be some modules for which we want to explicitly force
synchronous probing, so extend <modulename>.async_probe to take an
optional bool input so that async probing can be disabled for a specific
module.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This patch adds the function of headphone button detection,
Button detection will be enabled if the device tree
has a key_enable property.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20220627032959.3442064-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Krzysztof Kozlowski
Maxime Ripard
Bagas Sanjaya
Dave Airlie
Ioana Ciornei
Sibi Sankar
Arnd Bergmann
Linus Torvalds
Johnson Wang
Robert Marko
Wolfram Sang
Conor Dooley
Kamal Dasu
Bhupesh Sharma
Nick Desaulniers
Leo Yan
Ofir Bitton
Oded Gabbay
Dafna Hirschfeld
Jakub Kicinski
Bjorn Helgaas
David Gow
Daniel Latypov
Jeff LaBundy
Rob Herring
Cixi Geng
Chanho Park
Greg Kroah-Hartman
Saravana Kannan
Seven Lee