| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The i.MX iomuxc-gpr bindings are undocumented and a mess. Drop their use
from the examples.
The problem with the binding beyond the just random variations is that
the iomuxc-gpr is not a separate block, but registers within the iomuxc
block containing random leftover controls. As a separate DT node, it
creates nodes with overlapping memory addresses.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220422192121.2592030-1-robh@kernel.org
|
|
Drop a couple of old, empty .txt binding files which are no longer
referenced.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422191958.2589318-1-robh@kernel.org
|
|
Add bindings for MT6360 PMIC
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1608779989-9641-1-git-send-email-gene.chen.richtek@gmail.com
|
|
The SCP needs firmware which differs between other platforms and SoCs.
Add a new property "firmware-name" to allow the DT to specify the
platform/board specific path to this firmware file.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220419123331.14377-2-allen-kh.cheng@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
|
|
Convert the GENI based Qualcomm Universal Peripheral (QUP) Serial
Peripheral Interface (SPI) bindings to DT Schema.
The original bindings in TXT were not complete, so add during conversion
properties already used in DTS and/or in the driver: dmas,
interconnects, operating points and power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404064017.68634-1-krzysztof.kozlowski@linaro.org
|
|
This patch adds device-tree bindings for regulators on Silicon Mitus
SM5703 MFD.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220423085319.483524-3-markuss.broks@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds dt-bindings information for Analog Devices MAX98396
and MAX98397 Smart Amplifier.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425173715.1827706-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Need to bring commit d8bb92e70a43 ("drm/dp: Factor out a function to
probe a DPCD address") back as a dependency to further work in
drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Document RS485 related properties returned from ACPI _DSD as device
properties.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426122448.38997-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add polarity property for receiver enable. Some UARTs have separate
enable pins for tx (RTS or DE) and rx (RE). As most RS485 transceivers
have !RE pin, the default is active low in contrast to
rs485-rts-active-low that defaults to active high.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426122448.38997-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allwinner D1 contains a display engine 2.0. It features two mixers, a
TCON TOP (with DSI and HDMI), one TCON LCD, and one TCON TV.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-3-samuel@sholland.org
|
|
So far, the binding and driver have relied on the fact that the H6
clocks are both a prefix and a subset of the R40 clocks. This allows
them to share the clocks/clock-names items and the clock-output-names
order between the hardware variants.
However, the D1 hardware has TCON TV0 and DSI, but no TCON TV1. This
cannot be supported by the existing scheme because it puts a gap in the
middle of the item lists. To prepare for adding D1 support, use separate
lists for variants with different combinations of clocks.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-2-samuel@sholland.org
|
|
The ARASAN MMC controller on Keystone 3 class of devices needs the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").
In cases where SDCD line is not connected, adding
"ti,fails-without-test-cd" in the DT node helps to indicate the
controller, that the SDCD line has been pulled down, using the TESTCD bit.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220425063120.10135-2-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add i.MX8DXL compatible string. It also needs "fsl,imx8qm-fec" compatible.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220419113516.1827863-10-abel.vesa@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the sdhci-dove binding to JSON schema. The optional clocks
property was not in the original binding document but has been in the
dove.dtsi since commit 5b03df9ace68 ("ARM: dove: switch to DT clock
providers").
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220419024611.1327525-5-chris.packham@alliedtelesis.co.nz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the orion-sdio binding to JSON schema.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220419024611.1327525-4-chris.packham@alliedtelesis.co.nz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The VQMMC is often provided by a level shifter, so drop a small note
in the bindings that this can be the case and how that is done.
It is helpful information since this is pretty common.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220417144223.649201-1-linus.walleij@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SDHC controller in the imx8mn and imx8mp have the same controller
as the imx8mm which is slightly different than that of the imx7d.
Using the fallback of the imx8mm enables the controllers to support
HS400-ES which is not available on the imx7d. After discussion with NXP,
it turns out that the imx8qm should fall back to the imx8qxp, because
those have some additional flags not present in the imx8mm.
Mark the current state of the fallbacks as deprecated, and add the
proper fallbacks so in the future, the deprecated combination can be
removed and prevent any future devices from using the wrong fallback.
Suggested-by: haibo.chen@nxp.com
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220410193544.1745684-1-aford173@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
MediaTek has a new version of mmc IP since mt8183. Some IO registers
are moved to top to improve hardware design and named as "host top
registers".
Add host top register in the reg binding description for mt8183 and
successors.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220330094532.21721-2-tinghan.shen@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the marvell,xenon-sdhci binding to JSON schema. Currently the
in-tree dts files don't validate because they use sdhci@ instead of mmc@
as required by the generic mmc-controller schema.
The compatible "marvell,sdhci-xenon" was not documented in the old
binding but it accompanies the of "marvell,armada-3700-sdhci" in the
armada-37xx SoC dtsi so this combination is added to the new binding
document.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220329220544.2132135-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Note: the current series only supports hubs connected directly to
a root hub, support for other configurations could be added if
needed.
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220217104219.v21.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add hpe,gxp-ohci to the generic-ohci list. This is to
enable the device tree support.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Link: https://lore.kernel.org/r/20220421192132.109954-10-nick.hawkins@hpe.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add hpe,gxp-ehci to the generic-ehci list. This is to
enable the device tree.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Link: https://lore.kernel.org/r/20220421192132.109954-9-nick.hawkins@hpe.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Fairchild/ON Semiconductor FSA4480 Analog Audio switch is used in
USB Type-C configurations for muxing analog audio onto the USB
connector, and as such used to control the SBU signals for altmodes such
as DisplayPort.
Add a binding for this hardware block.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422222351.1297276-7-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document RZ/G2ULSoC bindings. USBHS block is identical to one
found on RZ/A2 SoC. No driver changes are required as generic compatible
string "renesas,rza2-usbhs" will be used as a fallback.
While at it, make the resets property required on RZ/{G2L,G2UL,V2L} SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220425140215.186797-1-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
R-Car V4H (R8A779G0) SoC has the R-Car Gen4 compatible HSCIF ports,
so document the SoC specific bindings.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220425064201.459633-4-yoshihiro.shimoda.uh@renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add interconnect IDs for Qualcomm SDX65 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1649854415-11174-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add additional sysfs nodes to monitor the transfer of firmware upload data
to the target device:
cancel: Write 1 to cancel the data transfer
error: Display error status for a failed firmware upload
remaining_size: Display the remaining amount of data to be transferred
status: Display the progress of the firmware upload
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-6-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the firmware subsystem to support a persistent sysfs interface that
userspace may use to initiate a firmware update. For example, FPGA based
PCIe cards load firmware and FPGA images from local FLASH when the card
boots. The images in FLASH may be updated with new images provided by the
user at his/her convenience.
A device driver may call firmware_upload_register() to expose persistent
"loading" and "data" sysfs files. These files are used in the same way as
the fallback sysfs "loading" and "data" files. When 0 is written to
"loading" to complete the write of firmware data, the data is transferred
to the lower-level driver using pre-registered call-back functions. The
data transfer is done in the context of a kernel worker thread.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-5-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add bindings for the MediaTek mt8195-demo board.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220415150003.1793063-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
This commit adds dt-binding documentation for the Mediatek MT8192
reference board.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20220419092030.30519-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The Tegra CPU COMPLEX CLUSTER area contains memory-mapped
registers that initiate CPU frequency/voltage transitions.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Document the max_wro_seq_files, nr_wro_seq_files, max_active_seq_files
and nr_active_seq_files sysfs attributes.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
|
|
This patch adds the new binding documentation for system clock
and functional clock on MediaTek MT8186.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220409132251.31725-2-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This adds device tree bindings for the externally routed clocks
CLKOUT1 and CLKOUT2 clocks found in the DB8500.
Cc: devicetree@vger.kernel.org
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220414221751.323525-2-linus.walleij@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The indentation was wrong, causing the documentation build to
fail with:
Sphinx parallel build error:
docutils.utils.SystemMessagePropagation: <system_message level="3" line="1202" source="/home/hans/work/src/v4l/media-git/Documentation/media/userspace-api/v4l/ext-ctrls-codec.rst"
type="ERROR"><paragraph>Error parsing content block for the "flat-table" directive: two-level bullet list expected, but row 1 does not contain a second-level bullet list.</paragraph><literal_block
xml:space="preserve">.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_RANDOM``
- The whole frame is completely refreshed randomly
after the specified period.
* - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC``
- The whole frame MBs are completely refreshed in cyclic order
after the specified period.
</literal_block></system_message>
make[1]: *** [Documentation/Makefile:96: htmldocs] Error 2
make: *** [Makefile:1678: htmldocs] Error 2
Link: https://lore.kernel.org/linux-media/62b53cbb-f3e2-ed8a-bba2-3f4145d9b8db@xs4all.nl
Fixes: fcbc4acf8b8d ("media: v4l2-ctrls: Add intra-refresh type control")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Let's add compatible for ti,am654-timer for TI am64, am65 and j72 SoCs.
As the timer hardware is the same between am64, am65 and j72 we use the
compatible name for the earliest SoC with this timer.
The timer interrupts are not routable for the operating system for some
timers on am6. Let's make sure the interrupts are configured for the
timers on all other SoCs.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220414085807.7389-3-tony@atomide.com
|
|
Let's update the TI timer binding to use yaml. As this binding is specific
to the TI dual-mode timers also known as dm-timers, let's use file name
ti,timer-dm.yaml to avoid confusion with other timers.
We add checks for the deprecated ti,hwmods property as done for other TI
device driver bindings earlier.
We also correct the issue with the old binding that was out of date for
several properties.
The am43 related timers are undocumented, but compatible with the am3
timers. Let's add the am43 timers too.
The dm814 and dm816 timers are missing, let's add them.
Some timers on some SoCs are dual mapped, like the ABE timers on omap4
and 5. The reg property maxItems must be updated to 2.
The timer clocks can be managed by the parent interconnect target module
with no clocks assigned for the timer node. And in some cases, the SoC may
need to configure additional system clock for the timer in addition to the
functional clock.
The clock names are optional and not specific to the comptible property.
For example, dra7 timers on l3 interconnect do not need clock-names, while
the timers on dra7 l4 interconnect need them with both being compatible
with ti,omap5430-timer.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220414085807.7389-2-tony@atomide.com
|
|
Document the General Timer Module(a.k.a OSTM) found on the RZ/G2UL SoC.
OSTM module is identical to one found RZ/G2L SoC. No driver changes are
required as generic compatible string "renesas,ostm" will be used as a
fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425141828.197321-1-biju.das.jz@bp.renesas.com
|
|
Convert the fsl,layerscape-dcfg binding to the new YAML format.
In the device trees, the device node always have a "syscon"
compatible, which wasn't mentioned in the previous binding.
One thing added here, compared to the original binding is the clock
controller subnode of the LS1028A SoC and its "simple-mfd" compatible as
used in arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi as well as the
little-endian and big-endian properties.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425140433.33936-1-michael@walle.cc
|
|
Document RZ/G2UL I2C bindings. RZ/G2UL I2C is identical to one found on
the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible
string "renesas,riic-rz" will be used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425133152.176949-1-biju.das.jz@bp.renesas.com
|
|
This rewrites the Mediatek GNSS bindings in YAML.
Cc: devicetree@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425132947.1311171-1-linus.walleij@linaro.org
|
|
Typical GPIO lines like enable, powerdown, reset or wakeup are not
documented as common, which leads to new variations of these (e.g.
pwdn-gpios). Add a common schema which serves also as a documentation
for preferred naming.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Pull f2fs fixes from Jaegeuk Kim:
"This includes major bug fixes introduced in 5.18-rc1 and 5.17+:
- Remove obsolete whint_mode (5.18-rc1)
- Fix IO split issue caused by op_flags change in f2fs (5.18-rc1)
- Fix a wrong condition check to detect IO failure loop (5.18-rc1)
- Fix wrong data truncation during roll-forward (5.17+)"
* tag 'f2fs-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: should not truncate blocks during roll-forward recovery
f2fs: fix wrong condition check when failing metapage read
f2fs: keep io_flags to avoid IO split due to different op_flags in two fio holders
f2fs: remove obsolete whint_mode
|
|
When booting the kernel we access system registers such as GCR_EL1
if MTE is supported. These accesses are defined to trap to EL3 if
SCR_EL3.ATA is disabled. Furthermore, tag accesses will not behave
as expected if SCR_EL3.ATA is not set, or if HCR_EL2.ATA is not set
and we were booted at EL1. Therefore, require that these bits are
enabled when appropriate.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://linux-review.googlesource.com/id/Iadcfd4dcd9ba3279b2813970b44d7485b0116709
Link: https://lore.kernel.org/r/20220422202912.292039-1-pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix various kfree() issues related to of_overlay_apply().
- Double kfree() of fdt and tree when init_overlay_changeset()
returns an error.
- free_overlay_changeset() free the root of the unflattened
overlay (variable tree) instead of the memory that contains
the unflattened overlay.
- For the case of a failure during applying an overlay, move kfree()
of new_fdt and overlay_mem into free_overlay_changeset(), which
is called by the function that allocated them.
- For the case of removing an overlay, the kfree() of new_fdt and
overlay_mem remains in free_overlay_changeset().
- Check return value of of_fdt_unflatten_tree() for error instead
of checking the returned value of overlay_root.
- When storing pointers to allocated objects in ovcs, do so as
near to the allocation as possible instead of in deeply layered
function.
More clearly document policy related to lifetime of pointers into
overlay memory.
Double kfree()
Reported-by: Slawomir Stepien <slawomir.stepien@nokia.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420222505.928492-3-frowand.list@gmail.com
|
|
Fix the documentation for the hsiphash functions to avoid conflating the
HalfSipHash algorithm with the hsiphash functions, since these functions
actually implement either HalfSipHash or SipHash, and random.c now uses
HalfSipHash (in a very special way) without the hsiphash functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Render usage example of HalfSipHash function as code block by using
literal block syntax.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Render danger paragraph into warning block for emphasization.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
Rob Herring
Gene Chen
Allen-KH Cheng
Mathieu Poirier
Krzysztof Kozlowski
Markuss Broks
Ryan Lee
Jani Nikula
Ilpo Järvinen
Samuel Holland
Aswath Govindraju
Abel Vesa
Chris Packham
Linus Walleij
Adam Ford
Tinghan Shen
Matthias Kaehlcke
Nick Hawkins
Bjorn Andersson
Biju Das
Yoshihiro Shimoda
Rohit Agarwal
Russ Weight
Fabien Parent
Sumit Gupta
Damien Le Moal
Chun-Jie Chen
Hans Verkuil
Tony Lindgren
Michael Walle
Linus Torvalds
Peter Collingbourne
Frank Rowand
Eric Biggers
Bagas Sanjaya