| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On the syscall conversions, we used uppercase for the sections,
but this is too bold. So, convert them to Camel Case, as it
looks visually better.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The layout of (table) captions in the RTD theme is a bit ugly and the
bordered, red colored of inline literals is a bit to gaudy. The
requirements has been discussed in the ML [1].
captions:
- captions should have 100% (not 85%) font size
- hide the permalink symbol as long as link is not hovered
inline literal:
- drop the borderbox and red color
[1] http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/101099
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
|
|
The default table layout of the RTD theme does not fit for vast tables,
like the ones we have in the linux_tv project. This has been discussed
on the ML [1].
The RTD theme is a two column layout, with a navigation column on the
left and a content column on the right:
content column
RTD theme's default is 800px as max width for the content, but we have
tables with tons of columns, which need the full width of the
view-port (BTW: *full width* is what DocBook's HTML is).
table
- sequences of whitespace should collapse into a single whitespace.
- make the overflow auto (scrollbar if needed)
- align caption "left" ("center" is unsuitable on vast tables)
[1] http://article.gmane.org/gmane.linux.kernel/2216509
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
|
|
This file is actually not used to build the media uAPI docbook.
So, remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Implements the minimal boilerplate for Sphinx HTML theme customization.
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
On some syscall descriptions, the tables are described after
the return value. Do that inside descriptions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are some ioctls in upper case. This is not the standard.
Put them on lowercase, to match what's done with other ioctls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This patch adds the kernel command line parameter "no_tb_segs" which
forces the kernel to use 256MB rather than 1TB segments. Forcing the use
of 256MB segments makes it considerably easier to test code that depends
on an SLB miss occurring.
Suggested-by: Michael Neuling <mikey@neuling.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The document about rockchip platform make a mistaken in available
compatible name of "rk3288-edp", we should correct it to "rk3288-dp"
which correspond to the compatible name in driver.
This mistaken was introduced in commit be91c36247089 ("dt-bindings:
add document for rockchip variant of analogix_dp").
Reported-by: Tomasz Figa <tfiga@chromium.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
|
|
For RK3399's GRF module, if we want to operate the graphic related grf
registers, we need to enable the pclk_vio_grf which supply power for VIO
GRF IOs, so it's better to introduce an optional grf clock in driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
|
|
RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
The syscall pages are written to be used also as man-pages.
However, they don't match the format used by kernel-doc
generated pages from DocBook. Rewrite them to match it.
One side effect is that now all such pages at the book
will have the same format, reducing the format differences
between DVB and the other parts of the book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Just like V4L, split the DVB function calls into one file per
system call. This is a requirement for the man pages creator
on Sphinx to work, and makes the document easier to maintain.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Qualcomm Device Tree Changes for v4.8
* Reverse BAM dma node reverts
* Add BAM remote control options for affected platforms
* Enable peripherals on APQ8074 dragonboard
* Enable PMA8084 pwrky
* Fix PMIC reg entries by removing unnecessary size element
* Add SCM binding and support for all currently supported boards
* Add Qualcomm WCNSS binding documentation
* Rename db600c to SD_600eval and add peripheral nodes
* Remove gpio key entry from Nexus7
* Add APQ8060 based dragonboard and associated peripherals
* Add ARMv7 PMU for IPQ4019
* Update smem state cells to match documentation
* tag 'qcom-dt-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (26 commits)
dts: ipq4019: support ARMv7 PMU
ARM: dts: add Qualcomm APQ8060-based Dragonboard
ARM: dts: move the fixed MMC regulator to SURF board
ARM: dts: fix the MSM8660 RTC base address
ARM: dts: add I2C block in GSBI12
ARM: dts: add L2CC and RPM with regulators for MSM8660
ARM: dts: add SDCC5 to Qualcomm MSM8660
ARM: dts: add GPIO and MPP to MSM8660 PMIC
device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey
arm: dts: qcom: Update smem state cells usage
ARM: dts: qcom: msm8974-honami: Set DMA as remotely controlled
ARM: dts: sd_600eval: Fix eMMC lockup issue
ARM: dts: apq8064: rename db600c to SD_600eval
ARM: dts: apq8064: move sdcc3 pinctrls out of baord file
ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc file
dt: binding: Add Qualcomm WCNSS control binding
dts: qcom: apq8064: Add SCM firmware node
dts: qcom: msm8974: Add SCM firmware node
dts: qcom: apq8084: Add SCM firmware node
dt/bindings: firmware: Add Qualcomm SCM binding
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Qualcomm ARM Based Driver Updates for v4.8
* Rework of SCM driver
* Add file patterns for Qualcomm Maintainers entry
* Add worker for wcnss_ctrl signaling
* Fixes for smp2p
* Update smem_state properties to match documentation
* Add SCM Peripheral Authentication service
* Expose SCM PAS command 10 as a reset controller
* tag 'qcom-drivers-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
firmware: qcom: scm: Expose PAS command 10 as reset-controller
firmware: qcom: scm: Peripheral Authentication Service
soc: qcom: Update properties for smem state referencing
soc: qcom: smp2p: Drop io-accessors
soc: qcom: smp2p: Correct addressing of outgoing value
soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
firmware: qcom: scm: Add support for ARM64 SoCs
firmware: qcom: scm: Convert to streaming DMA APIS
firmware: qcom: scm: Generalize shared error map
firmware: qcom: scm: Use atomic SCM for cold boot
firmware: qcom: scm: Convert SCM to platform driver
MAINTAINERS: Add file patterns for qcom device tree bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Device tree changes for omaps for v4.8 merge window:
- PWM binding updates and related dts changes
- OCM RAM updates for dra7
- Enable n900 lirc-rx51 driver
- omap3-gta04 updates for backlight, bma180, itg3200, hmc5843 and wifi
- am335x, am437x and am57xx operating point updates and additions
- am335x-icev2 pca9536 node
- dra72-evm regulator updates
- edma spelling fixes
- am335x and am437x ethernet phy update
- a series of mcbsp updates
- omap3-gta04 eeprom
- dra7 PCIe unit address fix
- stdout-path for beaglebone variants
- crypto accelerator nodes for am335x, am437x and dra7
* tag 'omap-for-v4.8/dt-part1-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (42 commits)
ARM: dts: AM43xx: Add node for RNG
ARM: dts: AM43xx: clk: Add RNG clk node
ARM: dts: DRA7: Add DT node for RNG IP
ARM: dts: DRA7: Add support for SHA IP
ARM: dts: DRA7: Add DT nodes for AES IP
ARM: dts: DRA7: Add DT node for DES IP
ARM: dts: am335x-bone-common: use stdout-path in Beaglebone boards.
ARM: dts: DRA7: fix unit address of second PCIe instance
ARM: dts: omap3-gta04: Add RFID eeprom node
ARM: dts: omap4-duovero: Add pdmclk binding for audio
ARM: dts: omap4-var-som-om44: Add pdmclk binding for audio
ARM: dts: omap4-sdp: Add pdmclk binding for audio
ARM: dts: omap4-panda-common: Add pdmclk binding for audio
ARM: dts: omap5-board-common: Add pdmclk binding for audio
ARM: dts: omap3: Add clocks to McBSP nodes
ARM: dts: am335x-bone-common: Mark MAC as having only one PHY
ARM: dts: am437x-idk-evm: Mark MAC as having only one PHY
ARM: dts: Correct misspelling, "emda3" -> "edma3"
ARM: dts: dra72-evm: Rename 3.3V regulator tag
ARM: dts: am335x-icev2: Add DT node for TI PCA9536
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
First part of X-Gene DTS changes queued for v4.8
The changes include:
+ 2 clean-up and style-fix patches from Bjorn
+ Correct timer interrupt polarity for X-Gene 2
+ Remove unused qmlclk node on X-Gene 1
* tag 'xgene-dts-for-v4.8-part1' of https://github.com/AppliedMicro/xgene-next:
arm64: dts: apm: Remove unused qmlclk node on X-Gene 1
arm64: dts: apm: Fix timer interrupt polarity for X-Gene 2 SoC
arm64: dts: apm: Remove leading '0x' from unit addresses
arm64: dts: apm: Use lowercase consistently for hex constants
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
SCPI updates and fixes for v4.8
1. Adds support for device power state management using generic power
domains and runtime PM
2. Other minor/miscellaneous fixes to the driver
* tag 'scpi-updates-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: scpi: add device power domain support using genpd
Documentation: add DT bindings for ARM SCPI power domains
firmware: arm_scpi: add support for device power state management
firmware: arm_scpi: make it depend on MAILBOX instead of ARM_MHU
firmware: arm_scpi: mark scpi_get_sensor_value as static
firmware: arm_scpi: remove dvfs_get packed structure
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
SoC changes for 4.8 #2:
- Add final documentation for sama5d2
- Fix some compilation warnings
* tag 'at91-ab-4.8-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91: fix warnings in pm.c
ARM: at91: Documentation: update the sama5d2 entry
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Fix some cross-references and improve the layout of this
page.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add a numbering for the figure.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion from DocBook made somethings look ugly.
Improve them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Sphinx doesn't format nice table captions, nor auto-numberate
them. So, convert tables into chapters.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are several things that didn't convert well. Fix them,
in order to improve the layout of the formatted document.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Use cross-references for read()/write() on a few places
where they weren't used.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The referenced ioctl there is only VIDIOC_STREAMON, so we
should override the name, to avoid it to also show _STREAMOFF.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion to ReST broke a minor things. Fix them.
While here, also make EBUSY constant, just like on other places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There were several conversion issues on this file, causing it
to be badly formatted. Fix them, in order to match the
design used on DocBook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Sphinx actually doesn't numerate tables nor figures. So,
let's add a subtitle before each table. That makes them
"numerated".
While here, fix the git binary that got corrupted.
Let's hope this will work, as the reason why we had
to encode them were to prevent some issues on commiting
those gif files on git.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Sphinx actually doesn't numerate tables. So, let's add a
subtitle before each table. That makes them numerated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are lots of ioctls mentioned there that aren't cross-referenced.
Convert the const to cross references. That makes it visually
better, and improves navigation along the document.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion from DocBook removed them. Re-add.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Let's remove bad whitespaces on the entire book.
That helps to avoid mixing whitespace removal with other
patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are lots of ioctls mentioned there that aren't cross-referenced.
Convert the const to cross references. That makes it visually
better, and improves navigation along the document.
While here, remove bad whitespaces.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion from DocBook removed them. Re-add.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are lots of ioctls mentioned there that aren't cross-referenced.
Convert the const to cross references. That makes it visually
better, and improves navigation along the document.
While here, remove bad whitespaces.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion from DocBook removed them. Re-add.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion added an empty column (probably, it was used on
DocBook just to increase spacing.
Remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Originally, at the DocBook, the "Byte Order" were a single
paragraph with the string that follows it. The conversion
broke it, and, sometimes, it added an extra dot.
Fix them altogheter at pixfmt-*.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion added an empty column (probably, it was used on
DocBook just to increase spacing.
It also added an extra line on one of the texts, breaking
the original paragraph into two ones.
Remove them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Documentation/linux_tv/media/rc/lirc_dev_intro:17: WARNING: Inline substitution_reference start-string without end-string.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The generic error codes and licensing sections are general to the
entire media book. They should not be inside the v4l dir. So,
promote them to the parent directory.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When we wrote the media controller's section, we re-used the
V4L, just because we were lazy to create a brand new DocBook.
Yet, it is a little ackward to have it mixed with V4L. So,
move it to its own directory, in order to have it better
organized.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When we wrote the remote controller's section, we re-used the
V4L, just because we were lazy to create a brand new DocBook.
Yet, it is a little ackward to have it mixed with V4L. So,
move it to its own directory, in order to have it better
organized.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Using auto-generated links is dangerous, as there are multiple
definitions for syscalls (at least one on each book part).
So, reference them by their explicit reference.
I used this small script to help writing this patch:
for i in $(git grep -l "c:func:"); do perl -ne 's/\:c\:func:\`(open|close|read|poll|write|select|mmap|munmap|ioctl)\(\)`/:ref:`$1() <func-$1>`/; print $_' < $i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add escape before asterisk to fix those warnings:
Documentation/linux_tv/media/dvb/FE_GET_EVENT:47: WARNING: Inline emphasis start-string without end-string.
Documentation/linux_tv/media/v4l/media-ioc-enum-links:78: WARNING: Inline emphasis start-string without end-string.
Documentation/linux_tv/media/v4l/media-ioc-enum-links:87: WARNING: Inline emphasis start-string without end-string.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Parsing this file were causing lots of warnings with sphinx,
due to the c function prototypes.
Fix that by prepending them with .. c:function::
While here, use the same way we document man-like pages,
at the V4L side of the book and add escapes to asterisks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Parsing this file were causing lots of warnings with sphinx,
due to the c function prototypes.
Fix that by prepending them with .. c:function::
While here, use the same way we document man-like pages,
at the V4L side of the book and add escapes to asterisks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Parsing this file were causing lots of warnings with sphinx,
due to the c function prototypes.
Fix that by prepending them with .. c:function::
While here, use the same way we document man-like pages,
at the V4L side of the book and add escapes to asterisks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
Mauro Carvalho Chehab
Markus Heiser
Alexandre TORGUE
Oliver O'Halloran
Yakir Yang
Olof Johansson