| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Due to Advisory 21 as documented in AM437x errata document,
UART module cannot be disabled once DMA is used. The only
workaround is to softreset the module before disabling it.
DRA7x UARTs are compatible to AM437x UARTs in terms of
this errata and prescribed workaround.
Enable usage of workaround for this errata on DRA7x SoCs.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use of of_machine_is_compatible() for handling AM335x specific
"DMA kick" quirk in 8250_omap driver makes it ugly to extend the
quirk for other platforms. Instead use a new compatible.
The new compatible will also make it easier to take care of
other quirks on AM335x and like SoCs.
In order to not break backward DTB compatibility for users of
8250_omap driver on AM335x based boards, existing use of
of_machine_is_compatible() has not been removed.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The compatible "ti,am4372-uart" is used in arch/arm/boot/dts/am4372.dtsi
but not documented. Add necessary documentation.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".
We keep parsing old name to keep compatibility with old DTSes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".
We keep parsing old name to keep compatibility with old DTSes.
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".
We keep parsing old name to keep compatibility with old DTSes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".
We keep parsing old name to keep compatibility with old DTSes.
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Which is formally known as the Asus C201 chromebook
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This adds support for the lsm303agr magnetometer.
Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This adds support for the lsm303agr accelerometer.
Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Pull iommu fixes from Joerg Roedel:
"The fixes include:
- a couple of fixes for the new ARM-SMMUv3 driver to fix issues found
on the first real implementation of that hardware.
- a patch for the Intel VT-d driver to fix a domain-id leak"
* tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix VM domain ID leak
iommu/arm-smmu: Skip the execution of CMD_PREFETCH_CONFIG
iommu/arm-smmu: Enlarge STRTAB_L1_SZ_SHIFT to support larger sidsize
iommu/arm-smmu: Fix the values of ARM64_TCR_{I,O}RGN0_SHIFT
iommu/arm-smmu: Fix LOG2SIZE setting for 2-level stream tables
iommu/arm-smmu: Fix the index calculation of strtab
|
|
The functionality of ext3 is fully supported by ext4 driver. Major
distributions (SUSE, RedHat) already use ext4 driver to handle ext3
filesystems for quite some time. There is some ugliness in mm resulting
from jbd cleaning buffers in a dirty page without cleaning page dirty
bit and also support for buffer bouncing in the block layer when stable
pages are required is there only because of jbd. So let's remove the
ext3 driver. This saves us some 28k lines of duplicated code.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Documentation of journalling layer in
Documentation/DocBook/filesystems.tmpl speaks about JBD layer. Since
that is going away, update the documentation to speak about JBD2. Also
update the parts that have changed since someone last touched the
document and remove some parts which are just misleading and outdated.
Signed-off-by: Jan Kara <jack@suse.com>
|
|
This adds DT binding documentation for Mediatek MT6795.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
On current ST platforms the LPC controls a number of functions including
Watchdog and Real Time Clock. This patch provides the bindings used to
configure LPC in Clocksource mode.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Conflicts:
net/bridge/br_mdb.c
br_mdb.c conflict was a function call being removed to fix a bug in
'net' but whose signature was changed in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the pin controller probes before the GPIO driver it needs to
populate the GPIO driver state containers ahead of the actual
driver probe as the addresses are used by both halves of the
driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Sending of notification is done by exiting vcpu to user space
if KVM_REQ_HV_CRASH is enabled for vcpu. At exit to user space
the kvm_run structure contains system_event with type
KVM_SYSTEM_EVENT_CRASH to notify about guest crash occurred.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Peter Hornyack <peterhornyack@google.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gleb Natapov <gleb@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge "omap dts changes for v4.3, part2" from Tony Lindgren:
More omap dts changes for v4.3 merge window:
- Add missing devices for pandora. Note that we're adding wl1251
WLAN and LCD backlight support for now using legacy pdata as that
allows us to drop the legacy board file for pandora in another
series of patches
- Enable power button support for omap5-uevm
- Add aliases for am437x UARTs
- Add support for phyCORE phyBOARD-WEGA-AM335x rdk and
phyCORE-AM335x SoM
- Use u16 values for tsc2046 on omap3-lilly
* tag 'omap-for-v4.3/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap3-pandora: add wifi support
ARM: OMAP2+: omap3-pandora: add backlight support
ARM: dts: omap3-pandora: add support for usb host and 32k buffer
ARM: dts: omap3-pandora: miscellaneous corrections
ARM: dts: omap5-uevm: Add Palmas power button support
ARM: dts: am437x: add aliases for all UART instances
ARM: dts: Add phyBOARD-WEGA-AM335x rdk
ARM: dts: Add support for phyCORE-AM335x SoM
ARM: dts: omap3: correct the format of u16 values for tsc2046 node
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add a sysfs node to make it easier to verify if LPM is supported and being
enabled for USB 3.0 devices.
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit renames rcu_lockdep_assert() to RCU_LOCKDEP_WARN() for
consistency with the WARN() series of macros. This also requires
inverting the sense of the conditional, which this commit also does.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
|
|
Per RFC 6724, section 4, "Candidate Source Addresses":
It is RECOMMENDED that the candidate source addresses be the set
of unicast addresses assigned to the interface that will be used
to send to the destination (the "outgoing" interface).
Add a sysctl to enable this behaviour.
Signed-off-by: Erik Kline <ek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for probing the TC358743 subdevice from device tree.
The reference clock must be supplied using the common clock bindings.
MIPI CSI-2 specific properties are parsed from the OF graph endpoint
node and support for a non-continuous MIPI CSI-2 clock is added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use a generic name for this kind of PLL
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
|
|
Currently the PHY management type is selected by the MAC driver arbitrary.
The decision is based on the presence of the "fixed-link" node and on a
will of the driver's authors.
This caused a regression recently, when mvneta driver suddenly started
to use the in-band status for auto-negotiation on fixed links.
It appears the auto-negotiation may not work when expected by the MAC driver.
Sebastien Rannou explains:
<< Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's
a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with
inband status) is connected to the switch through QSGMII, and in this context
we are on the media side of the PHY. >>
https://lkml.org/lkml/2015/7/10/206
This patch introduces the new string property 'managed' that allows
the user to set the management type explicitly.
The supported values are:
"auto" - default. Uses either MDIO or nothing, depending on the presence
of the fixed-link node
"in-band-status" - use in-band status
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
CC: Rob Herring <robh+dt@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: Grant Likely <grant.likely@linaro.org>
CC: devicetree@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't unset the direct_complete flag on devices that have runtime PM
disabled, if they are runtime suspended.
This is needed because otherwise ancestor devices wouldn't be able to
do direct_complete without adding runtime PM support to all its
descendants.
Also removes pm_runtime_suspended_if_enabled() because it's now unused.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Finally advertise the KVM capability for SET_GUEST_DEBUG. Once arm
support is added this check can be moved to the common
kvm_vm_ioctl_check_extension() code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This adds support for SW breakpoints inserted by userspace.
We do this by trapping all guest software debug exceptions to the
hypervisor (MDCR_EL2.TDE). The exit handler sets an exit reason of
KVM_EXIT_DEBUG with the kvm_debug_exit_arch structure holding the
exception syndrome information.
It will be up to userspace to extract the PC (via GET_ONE_REG) and
determine if the debug event was for a breakpoint it inserted. If not
userspace will need to re-inject the correct exception restart the
hypervisor to deliver the debug exception to the guest.
Any other guest software debug exception (e.g. single step or HW
assisted breakpoints) will cause an error and the VM to be killed. This
is addressed by later patches which add support for the other debug
types.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This commit adds a stub function to support the KVM_SET_GUEST_DEBUG
ioctl. Any unsupported flag will return -EINVAL. For now, only
KVM_GUESTDBG_ENABLE is supported, although it won't have any effects.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Bring into line with the comments for the other structures and their
KVM_EXIT_* cases. Also update api.txt to reflect use in kvm_run
documentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
phyBOARD-WEGA-AM335x represents a direct soldered
combination of a phyCORE-AM335x SoM and carrier board.
Different kind of SoM options can be connected to
the wega carrier board. So we created a separate
wega dtsi file. The final dts contains the actual
SoM on the carrier board.
WEGA carrier board features:
* ETH phy on carrier board: 1x MII
* 1x CAN
* 2x UART
* USB0 (device)
* USB1 (host)
* mSD slot
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Now I am very fed up with people reinventing kernel wheels in
userspace "just because they can" (read, sysfs). Put in a angry
blurb in sysfs doc and put in a new file with pointers to other
subsystem drivers utilizing GPIOs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The kernel does not support the MCA bus anymroe, so mark sys_desc_table
as obsolete: remove any reference from the code together with the remaining
of MCA logic.
bloat-o-meter output:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-55 (-55)
function old new delta
i386_start_kernel 128 119 -9
setup_arch 1421 1375 -46
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437409430-8491-1-git-send-email-p.pisati@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-07-17
This series contains updates to igb, ixgbe, ixgbevf, i40e, bnx2x,
freescale, siena and dp83640.
Jacob provides several patches to clarify the intended way to implement
both SIOCSHWTSTAMP and ethtool's get_ts_info(). It is okay to support
the specific filters in SIOCSHWTSTAMP by upscaling them to the generic
filters.
Alex Duyck provides a igb patch to pull the time stamp from the fragment
before it gets added to the skb, to avoid a possible issue in which the
fragment can possibly be less than IGB_RX_HDR_LEN due to the time stamp
being pulled after the copybreak check. Also provides a ixgbevf patch to
fold the ixgbevf_pull_tail() call into ixgbevf_add_rx_frag(), which gives
the advantage that the fragment does not have to be modified after it is
added to the skb.
Fan provides patches for ixgbe/ixgbevf to set the receive hash type
based on receive descriptor RSS type.
Todd provides a fix for igb where on check for link on any media other
than copper was not being detected since it was looking on the incorrect
PHY page (due to the page being used gets switched before the function
to check link gets executed).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both of these fields are unused and has been unused since they
were added 3 and 5 years ago. Drop them since they are clearly
not very useful.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A fine granulity support for delay would be very useful when profiling
VM logics, such as page allocation including page reclaim and memory
compaction with function graph.
Thus, this patch adds two additional marks with two changes.
- An equal sign in mark selection function is removed to align code
behavior with comments and documentation.
- The function graph example related to delay in ftrace.txt is updated
to cover all supported marks.
Link: http://lkml.kernel.org/r/1436626300-1679-3-git-send-email-jungseoklee85@gmail.com
Cc: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 731d5cca82729c85ca3296902a64836619f4ba2d.
Commit ffe1f0df5862 ("rpcrdma: Merge svcrdma and xprtrdma modules into
one") forgot to update the corresponding documentation.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The driver currently does not take into account the minimum sample time
as per the Figure 6-8 Chapter 9.1.1 12-bit ADC electrical characteristics.
We set a static amount of cycles instead of considering the sample time
as a given value, which depends on hardware characteristics.
Determine sampling frequencies by first reading the device tree property
node and then calculating the required Long Sample Time Adder (LSTAdder)
value, based on the ADC clock frequency and sample time value obtained
from the device tree. This LSTAdder value is then used for calculating
the sampling frequencies possible.
In case the sample time property is not specified through the device
tree, a safe default value of 1000ns is assumed.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This adds support for Microchip's 13 bit 1 channel AD converter MCP3301
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
add the description about dvs1, dvs2, and add the example.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is used for rockchip board using a rt5645/rt5650.
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: zhengxing <zhengxing@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is used for rockchip board using a max98090.
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: zhengxing <zhengxing@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.
|
|
This patch introduces a new compatible string: "atmel,sama5d3-rstc" and
new reset function for sama5d3 and later chips.
As in sama5d3 or later chips, we don't have to shutdown the DDR
controller before reset. Shutdown the DDR controller before reset is a
workaround to avoid DDR signal driving the bus, but since sama5d3 and
later chips there is no such a conflict.
So in this patch:
1. the sama5d3 reset function only need to write the rstc register
and return.
2. we can remove the code related with sama5d3 DDR controller as
we don't use it at all.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
|
|
Although futexes are well known for being a royal pita,
we really have very little debugging capabilities - except
for relying on tglx's eye half the time.
By simply making use of the existing fault-injection machinery,
we can improve this situation, allowing generating artificial
uaddress faults and deadlock scenarios. Of course, when this is
disabled in production systems, the overhead for failure checks
is practically zero -- so this is very cheap at the same time.
Future work would be nice to now enhance trinity to make use of
this.
There is a special tunable 'ignore-private', which can filter
out private futexes. Given the tsk->make_it_fail filter and
this option, pi futexes can be narrowed down pretty closely.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Link: http://lkml.kernel.org/r/1435645562-975-3-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This patch adds documentation for Device-Tree bindings for the
Security System cryptographic accelerator driver.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
Sekhar Nori
Dmitry Torokhov
Romain Perier
Giuseppe Barba
Linus Torvalds
Jan Kara
Jan Kara
Mars Cheng
Lee Jones
David S. Miller
Linus Walleij
Andrey Smetanin
Olof Johansson
Kevin Strasser
Paul E. McKenney
Erik Kline
Philipp Zabel
Gabriel Fernandez
Stas Sergeev
Alan Stern
Alex Bennée
Teresa Remmet
Paolo Pisati
Joachim Eastwood
Jungseok Lee
Scott Feldman
Greg Kroah-Hartman
J. Bruce Fields
Sanchayan Maity
Andrea Galbusera
Chris Zhong
zhengxing
Josh Wu
Davidlohr Bueso
LABBE Corentin