| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SCMI protocols in the platform can optionally signal to the OSPM agent
the expected execution latency for a specific resource/operation pair.
Introduce an SCMI system wide optional property to describe a global time
threshold which can be configured on a per-platform base to determine the
opportunity, or not, for an SCMI command advertised to have a higher
latency than the threshold, to be considered for atomic operations:
high-latency SCMI synchronous commands should be preferably issued in the
usual non-atomic mode.
Link: https://lore.kernel.org/r/20220217131234.50328-5-cristian.marussi@arm.com
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Update binding document for HDA support on Tegra234 chip.
Tegra234 has max of 2 clocks and 2 resets which requires to add
minItems and maxItems for clocks and resets as Tegra chips can
now have minimum of 2 and maximum of 3 clocks and reset support.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220216092240.26464-6-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Update the doc with the new fun.
[ bp: Massage commit message. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add the board binding for the OSMC Vero 4K+ STB device
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220211105311.30320-3-christianshewitt@gmail.com
|
|
Open Source Media Centre (Sam Nazarko Trading Ltd.) are a manufacturer
of Linux Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220211105311.30320-2-christianshewitt@gmail.com
|
|
The GW7903 is based on the i.MX 8M Mini SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- microSD connector with UHS support
- LIS2DE12 3-axis accelerometer
- Gateworks System Controller
- IMX8M FEC
- software selectable RS232/RS485/RS422 serial transceiver
- PMIC
- 2x off-board bi-directional opto-isolated digital I/O
- 1x M.2 A-E Key Socket and 1x MiniPCIe socket with USB2.0 and PCIe
(resistor loading to route PCIe/USB2 between M.2 and MiniPCIe socket)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull power supply fixes from Sebastian Reichel:
"Three regression fixes for the 5.17 cycle:
- build warning fix for power-supply documentation
- pointer size fix in cw2015 battery driver
- OOM handling in bq256xx charger driver"
* tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq256xx: Handle OOM correctly
power: supply: core: fix application of sizeof to pointer
power: supply: fix table problem in sysfs-class-power
|
|
This callback is never called, so remove support.
Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Used to define a local endpoint to communicate with MCTP peripherals
attached to an I2C bus. This I2C endpoint can communicate with remote
MCTP devices on the I2C bus.
In the example I2C topology below (matching the second yaml example) we
have MCTP devices on busses i2c1 and i2c6. MCTP-supporting busses are
indicated by the 'mctp-controller' DT property on an I2C bus node.
A mctp-i2c-controller I2C client DT node is placed at the top of the
mux topology, since only the root I2C adapter will support I2C slave
functionality.
.-------.
|eeprom |
.------------. .------. /'-------'
| adapter | | mux --@0,i2c5------'
| i2c1 ----.*| --@1,i2c6--.--.
|............| \'------' \ \ .........
| mctp-i2c- | \ \ \ .mctpB .
| controller | \ \ '.0x30 .
| | \ ......... \ '.......'
| 0x50 | \ .mctpA . \ .........
'------------' '.0x1d . '.mctpC .
'.......' '.0x31 .
'.......'
(mctpX boxes above are remote MCTP devices not included in the DT at
present, they can be hotplugged/probed at runtime. A DT binding for
specific fixed MCTP devices could be added later if required)
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Samsung pinctrl drivers changes for v5.18
1. Fix OF reference leak in pinctrl driver probe error path.
2. Correct list of handlers for Exynos850 ALIVE and CMGP pin banks.
3. Accept devicetrees with GPIO pin bank definitions named with a
"-gpio-bank" suffix. This is necessary for later Samsung pinctrl
bindings dtschema.
4. Convert Samsung pinctrl bindings to dtschema.
5. Add support for Exynos850 and ExynosAutov9 wake-up interrupts.
6. Add support for Tesla FSD SoC.
|
|
pinctrl: renesas: Updates for v5.18
- Add MOST (MediaLB I/F) pins on R-Car E3 and D3,
- Add support for the new RZ/V2L SoC,
- Miscellaneous fixes and improvements.
|
|
The compatible string is already in use, fix the chip list in binding to
include it.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
The compatible string is already in use, fix the binding to include it.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Sync up with mainline to get the latest changes in HID subsystem.
|
|
Remove mmu_audit.c and all its collateral, the auditing code has suffered
severe bitrot, ironically partly due to shadow paging being more stable
and thus not benefiting as much from auditing, but mostly due to TDP
supplanting shadow paging for non-nested guests and shadowing of nested
TDP not heavily stressing the logic that is being audited.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull sound fixes from Takashi Iwai:
"A collection of small patches, mostly for old and new regressions and
device-specific fixes.
- Regression fixes regarding ALSA core SG-buffer helpers
- Regression fix for Realtek HD-audio mutex deadlock
- Regression fix for USB-audio PM resume error
- More coverage of ASoC core control API notification fixes
- Old regression fixes for HD-audio probe mask
- Fixes for ASoC Realtek codec work handling
- Other device-specific quirks / fixes"
* tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ASoC: intel: skylake: Set max DMA segment size
ASoC: SOF: hda: Set max DMA segment size
ALSA: hda: Set max DMA segment size
ALSA: hda/realtek: Fix deadlock by COEF mutex
ALSA: usb-audio: Don't abort resume upon errors
ALSA: hda: Fix missing codec probe on Shenker Dock 15
ALSA: hda: Fix regression on forced probe mask option
ALSA: hda/realtek: Add quirk for Legion Y9000X 2019
ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra
ASoC: wm_adsp: Correct control read size when parsing compressed buffer
ASoC: qcom: Actually clear DMA interrupt register for HDMI
ALSA: memalloc: invalidate SG pages before sync
ALSA: memalloc: Fix dma_need_sync() checks
MAINTAINERS: update cros_ec_codec maintainers
ASoC: rt5682: do not block workqueue if card is unbound
ASoC: rt5668: do not block workqueue if card is unbound
ASoC: rt5682s: do not block workqueue if card is unbound
ASoC: tas2770: Insert post reset delay
ASoC: Revert "ASoC: mediatek: Check for error clk pointer"
ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver
...
|
|
Add yaml binding for msm8998 dpu1 support.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113145111.29984-4-jami.kettunen@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
SoCFPGA dts updates for v5.18, part 2
- Add the "intel,socfpga-agilex-hsotg" compatible for Agilex platform
* tag 'socfpga_dts_update_for_v5.18_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"
dt-bindings: usb: dwc2: add compatible "intel,socfpga-agilex-hsotg"
Link: https://lore.kernel.org/r/20220211112556.98940-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In most cases, the default values of DSI PHY tuning registers should be
sufficient as they are fully optimized. However, in some cases where
extreme board parasitics cause the eye shape to degrade, the override
bits can be used to improve the signal quality.
The general guidelines for DSI PHY tuning include:
- High and moderate data rates may benefit from the drive strength and
drive level tuning.
- Drive strength tuning will affect the output impedance and may be used
for matching optimization.
- Drive level tuning will affect the output levels without affecting the
impedance.
The clock and data lanes have a calibration circuitry feature. The drive
strength tuning can be done by adjusting rescode offset for hstop/hsbot,
and the drive level tuning can be done by adjusting the LDO output level
for the HSTX drive.
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1643573719-32095-2-git-send-email-quic_rajeevny@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The Qualcomm SM8350 platform comes with a single DisplayPort controller,
add support for this in the DisplayPort driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211228045934.1524865-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
A few drivers use this property to describe the GPIO pin used to protect
the NAND during program/erase operations.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220217144755.270679-2-christophe.kerello@foss.st.com
|
|
Drop mtd/cortina,gemini-flash.txt since it is nearly already handled by
Documentation/devicetree/bindings/mtd/mtd-physmap.yaml.
We add jedec-flash to list of compatible because one board (gemini-dlink-dns-313.dts) needs it.
See commit a10d862e585e ("ARM: dts: Fix the DNS-313 flash compatible")
The flash on the DNS-313 needs to be probed as JEDEC, it does not conform to the common CFI standard.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220211120842.3388592-1-clabbe@baylibre.com
|
|
This chip is not an ST part, but it appears to be register-compatible
with the LIS2DH, so it can use the same binding.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220202235049.8051-3-samuel@sholland.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Hangzhou Silan Microelectronics Co., Ltd. (http://www.silan.com.cn/) is
a manufacturer of ICs, including MEMS sensors.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220202235049.8051-2-samuel@sholland.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The change adds QCOM SM8450 compatible value to the list of QCOM CCI
controller compatibles, the controller found on the SoC is equal to
the ones found on previous SoC generations.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This patch converts ata/cortina,gemini-sata-bridge binding to yaml
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220211120157.3385145-1-clabbe@baylibre.com
|
|
Convert Atmel SHA documentation to yaml format. With the conversion the
clock and clock-names properties are made mandatory. The driver returns
-EINVAL if "sha_clk" is not found, reflect that in the bindings and make
the clock and clock-names properties mandatory. Update the example to
better describe how one should define the dt node.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220211093922.456634-4-tudor.ambarus@microchip.com
|
|
Convert Atmel TDES documentation to yaml format. With the conversion the
clock and clock-names properties are made mandatory. The driver returns
-EINVAL if "tdes_clk" is not found, reflect that in the bindings and make
the clock and clock-names properties mandatory. Update the example to
better describe how one should define the dt node.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220211093922.456634-3-tudor.ambarus@microchip.com
|
|
Convert Atmel AES documentation to yaml format. With the conversion the
clock and clock-names properties are made mandatory. The driver returns
-EINVAL if "aes_clk" is not found, reflect that in the bindings and make
the clock and clock-names properties mandatory. Update the example to
better describe how one should define the dt node.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220211093922.456634-2-tudor.ambarus@microchip.com
|
|
Description: This patch adds the Hewlett Packard Enterprise prefix
that will be used for upcoming support in the HPE BMC GXP.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220210175912.102159-1-nick.hawkins@hpe.com
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Jon Lin <jon.lin@rock-chips.com>:
A collection of fixes and support for new features in the Rockchip
driver.
base-commit: 80808768e41324d2e23de89972b5406c1020e6e4
|
|
Add devicetree support for the Will Semiconductor WUSB3801. This is a
basic non-PD Type-C port controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220214050118.61015-3-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add prefix for Will Semiconductor Co. Ltd. (http://www.willsemi.com/)
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220214050118.61015-2-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the DT bindings the wfx driver cannot be processed by make
dt_binding_check. We need to place it somewhere into
Documentation/devicetree/bindings/.
After that change, we are able to get warnings from dt_binding_check and
fix them.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220217103248.183770-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Follow the precedent set by other architectures that support the VCPU
ioctl, KVM_ENABLE_CAP, and advertise the VM extension, KVM_CAP_ENABLE_CAP.
This way, userspace can ensure that KVM_ENABLE_CAP is available on a
vcpu before using it.
Fixes: 5c919412fe61 ("kvm/x86: Hyper-V synthetic interrupt controller")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220214212950.1776943-1-aaronlewis@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
link-frequencies is required but only mentioned in the example. Add
it to the description.
Fixes: f3ce7200ca18 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This fixes "make dt_binding_check":
Documentation/devicetree/bindings/media/i2c/hynix,hi846.example.dt.yaml:
camera@20: port:endpoint: Unevaluated properties are not allowed
('link-frequencies', 'data-lanes' were unexpected)
From schema: Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
[Sakari Ailus: Reword commit message]
Fixes: f3ce7200ca18 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to perform more open-coded replacements of common allocation
size arithmetic, the kernel needs saturating (SIZE_MAX) helpers for
multiplication, addition, and subtraction. For example, it is common in
allocators, especially on realloc, to add to an existing size:
p = krealloc(map->patch,
sizeof(struct reg_sequence) * (map->patch_regs + num_regs),
GFP_KERNEL);
There is no existing saturating replacement for this calculation, and
just leaving the addition open coded inside array_size() could
potentially overflow as well. For example, an overflow in an expression
for a size_t argument might wrap to zero:
array_size(anything, something_at_size_max + 1) == 0
Introduce size_mul(), size_add(), and size_sub() helpers that
implicitly promote arguments to size_t and saturated calculations for
use in allocations. With these helpers it is also possible to redefine
array_size(), array3_size(), flex_array_size(), and struct_size() in
terms of the new helpers.
As with the check_*_overflow() helpers, the new helpers use __must_check,
though what is really desired is a way to make sure that assignment is
only to a size_t lvalue. Without this, it's still possible to introduce
overflow/underflow via type conversion (i.e. from size_t to int).
Enforcing this will currently need to be left to static analysis or
future use of -Wconversion.
Additionally update the overflow unit tests to force runtime evaluation
for the pathological cases.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Add support for sharp LQ140M1JW46 display panel. It is a 14" eDP panel
with 1920x1080 display resolution.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1644494255-6632-2-git-send-email-quic_sbillaka@quicinc.com
|
|
Add a binding description for the MStar/SigmaStar CPU PLL block.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
The ssd130x DRM driver also makes use of this Device Tree binding to allow
existing users of the fbdev driver to migrate without the need to change
their Device Trees.
Add myself as another maintainer of the binding, to make sure that I will
be on Cc when patches are proposed for it.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133935.3278933-1-javierm@redhat.com
|
|
Presently PAPR doesn't support injecting smart errors on an
NVDIMM. This makes testing the NVDIMM health reporting functionality
difficult as simulating NVDIMM health related events need a hacked up
qemu version.
To solve this problem this patch proposes simulating certain set of
NVDIMM health related events in papr_scm. Specifically 'fatal' health
state and 'dirty' shutdown state. These error can be injected via the
user-space 'ndctl-inject-smart(1)' command. With the proposed patch and
corresponding ndctl patches following command flow is expected:
$ sudo ndctl list -DH -d nmem0
...
"health_state":"ok",
"shutdown_state":"clean",
...
# inject unsafe shutdown and fatal health error
$ sudo ndctl inject-smart nmem0 -Uf
...
"health_state":"fatal",
"shutdown_state":"dirty",
...
# uninject all errors
$ sudo ndctl inject-smart nmem0 -N
...
"health_state":"ok",
"shutdown_state":"clean",
...
The patch adds a new member 'health_bitmap_inject_mask' inside struct
papr_scm_priv which is then bitwise ANDed to the health bitmap fetched from the
hypervisor. The value for 'health_bitmap_inject_mask' is accessible from sysfs
at nmemX/papr/health_bitmap_inject.
A new PDSM named 'SMART_INJECT' is proposed that accepts newly
introduced 'struct nd_papr_pdsm_smart_inject' as payload thats
exchanged between libndctl and papr_scm to indicate the requested
smart-error states.
When the processing the PDSM 'SMART_INJECT', papr_pdsm_smart_inject()
constructs a pair or 'inject_mask' and 'clear_mask' bitmaps from the payload
and bit-blt it to the 'health_bitmap_inject_mask'. This ensures the after being
fetched from the hypervisor, the health_bitmap reflects requested smart-error
states.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124202204.1488346-1-vaibhav@linux.ibm.com
|
|
The vimc driver is used for testing purpose, and some test use cases
involve sharing buffers with a consumer device. Consumers often require
DMA contiguous memory, which vimc doesn't currently support. This leads
in the best case to usage of bounce buffers, which is very slow, and in
the worst case in a complete failure.
Add support for the dma-contig allocator in vimc to support those use
cases properly. The allocator is selected through a new "allocator"
module parameter, which defaults to vmalloc.
[hverkuil: add missing 'select VIDEOBUF2_DMA_CONFIG' to Kconfig]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As LaTeX macros for CJK font settings can have Latin-script font
settings as well, settings under Documentation/translations/ can
be moved to the main conf.py.
By this change, translations.pdf built by top-level "make pdfdocs"
can have properly aligned ascii-art diagrams except for Korean
ones.
For the reason of remaining misalignment in Korean diagrams, see
changelog of commit a90dad8f610a ("docs: pdfdocs: Add conf.py
local to translations for ascii-art alignment").
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/eb87790a-03f4-9f29-c8a3-ef2c3e78ca18@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
On systems without "Noto Sans CJK" fonts, CJK chapters in
translations.pdf are full of "TOFU" boxes, with a long build time and
a large log file containing lots of missing-font warnings.
Avoid such waste of time and resources by skipping CJK chapters when
CJK fonts are not available.
To skip whole chapters, change the definition of
\kerneldocBegin{SC|TC|KR|JP} commands so that they can have an argument
to be ignored.
This works as far as the argument (#1) is not used in the command.
In place of skipped contents, put a note on skipped contents at the
beginning of the PDF.
Change the call sites in index.rst of CJK translations accordingly.
When CJK fonts are available, existing command definitions with
no argument just work. LaTeX engine will see additional pairs of
"{" and "}", which add a level of grouping without having any effect
on typesetting.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/3359ca41-b81d-b2c7-e437-7618efbe241d@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Korean (Hangul) titles in Table of Contents of translations.pdf
don't have inter-phrase spaces.
This is because the CJKspace option of xeCJK is disabled by
default.
Restore the spaces by enabling the option at the beginning of every
document and disable it in the \kerneldocBegin{SC|TC|JP} commands.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/19141b3e-01d9-1f6d-5020-42fbda784831@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
xeCJK is enabled in Table of Contents (TOC) so that translations.pdf
built by top-level "make pdfdocs" can have its TOC typeset properly.
This causes quotation marks and apostrophe symbols appear too wide in
Latin-script docs.
This is because (1) Sphinx converts ASCII symbols into multi-byte
UTF-8 ones in LaTeX and (2) in the SC variant of "Noto CJK" font
families, those UTF-8 symbols have full-width glyph.
The KR variant of the font families has half-width glyph for those
symbols and TOC pages should look nicer when it is used instead.
Switch the default CJK font families to the KR variant and teach
xeCJK of those symbols' widths.
To compensate the switch, teach xeCJK of the width in the SC and
TC variants.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/0c8ea878-0a6f-ea01-ab45-4e66c5facee9@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Sphinx has its own set of width parameters of Table of Contents (TOC)
for LaTeX defined in its class definition of sphinxmanual.cls.
It also inherits parameters for chapter entries from report.cls of
original LaTeX base.
However, they are optimized assuming small documents with tens of
pages and chapters/sections of less than 10.
To cope with some of kernel-doc documents with more than 1000
pages and several tens of chapters/sections, definitions of those
parameters need to be adjusted.
Unfortunately, those parameters are hard coded in the class
definitions and need low-level LaTeX coding tricks to redefine.
As Sphinx 1.7.9 does not have \sphinxtableofcontentshook,
which defines those parameters in later Sphinx versions,
for compatibility with both pre-1.8 and later Sphinx versions,
empty the hook altogether and redefine \@pnumwidth, \l@chapter,
\l@section, and \@subsection commands originally defined in
report.cls.
Summary of parameter changes:
Width of page number (\@pnumwidth): 1.55em -> 2.7em
Width of chapter number: 1.5em -> 1.8em
Indent of section number: 1.5em -> 1.8em
Width of section number: 2.6em -> 3.2em
Indent of subsection number: 4.1em -> 5em
Width of subsection number: 3.5em -> 4.3em
Notes:
1. Parameters for subsection become relevant only when
":maxdepth: 3" is specified under "toctree::" (e.g., RCU/index.rst).
They can hold subsection numbers up to 5 digits such as "18.7.13"
(in RCU.pdf).
2. Number of chapters in driver-api.pdf is getting closer to 100.
When it reaches 100, another set of tweaks will be necessary.
3. The low-level LaTeX trick is mentioned in "Unofficial LaTeX2e
reference manual" at:
http://latexref.xyz/Table-of-contents-etc_002e.html
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e52b4718-7909-25be-fbc1-76800aa62ae3@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
Cristian Marussi
Mohan Kumar
Peter Zijlstra
Christian Hewitt
Tim Harvey
Linus Torvalds
John Garry
Matt Johnston
Dmitry Baryshkov
Linus Walleij
Li Yang
Dmitry Torokhov
Sean Christopherson
AngeloGioacchino Del Regno
Arnd Bergmann
Rajeev Nandan
Bjorn Andersson
Christophe Kerello
Corentin Labbe
Samuel Holland
Vladimir Zapolskiy
Tudor Ambarus
Nick Hawkins
Jakub Kicinski
Mark Brown
Jérôme Pouiller
Aaron Lewis
Martin Kepplinger
Kees Cook
Sankeerth Billakanti
Daniel Palmer
Javier Martinez Canillas
Vaibhav Jain
Laurent Pinchart
Akira Yokosawa