aboutsummaryrefslogtreecommitdiffstats
path: root/Kbuild (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-07-14net: hns: add acpi function of xge led controlLiuJian2-3/+58
The current code only support DT method to control xge led. This patch is the implementation of acpi method to control xge led. Signed-off-by: LiuJian <liujian56@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14netpoll: shut up a kernel warning on refcountWANG Cong1-1/+1
When we convert atomic_t to refcount_t, a new kernel warning on "increment on 0" is introduced in the netpoll code, zap_completion_queue(). In fact for this special case, we know the refcount is 0 and we just have to set it to 1 to satisfy the following dev_kfree_skb_any(), so we can just use refcount_set(..., 1) instead. Fixes: 633547973ffc ("net: convert sk_buff.users from atomic_t to refcount_t") Reported-by: Dave Jones <davej@codemonkey.org.uk> Cc: Reshetova, Elena <elena.reshetova@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14cdc_ncm: Set NTB format again after altsetting switch for Huawei devicesEnrico Mioso3-0/+35
Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by: Christian Panton <christian@panton.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14mdio: mux: fix parsing mux registers outside of the PHY address rangeMartin Blumenstingl1-2/+2
mdio_mux_init parses the child nodes of the MDIO mux. When using "mdio-mux-mmioreg" the child nodes are describing the register value that is written to switch between the MDIO busses. The change which makes the error messages more verbose changed the parsing of the "reg" property from a simple of_property_read_u32 call to of_mdio_parse_addr. On a Khadas VIM (based on the Meson GXL SoC, which uses mdio-mux-mmioreg) this prevents registering the MDIO mux (because the "reg" values on the MDIO mux child nodes are 0x2009087f and 0xe40908ff) and leads to the following errors: mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff PHY address -469169921 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f PHY address 537462911 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f mdio-mux-mmioreg c883455c.eth-phy-mux: Error: No acceptable child buses found mdio-mux-mmioreg c883455c.eth-phy-mux: failed to register mdio-mux bus /soc/periphs@c8834000/eth-phy-mux (as a result of that ethernet is not working, because the PHY which is connected through the mux' child MDIO bus, which is not being registered). Fix this by reverting the change from of_mdio_parse_addr to of_mdio_parse_addr. Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13net: set fib rule refcount after mallocDavid Ahern1-2/+1
The configure callback of fib_rules_ops can change the refcnt of a fib rule. For instance, mlxsw takes a refcnt when adding the processing of the rule to a work queue. Thus the rule refcnt can not be reset to to 1 afterwards. Move the refcnt setting to after the allocation. Fixes: 5361e209dd30 ("net: avoid one splat in fib_nl_delrule()") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13netlink: correctly document nla_put_u64_64bit()Rolf Eike Beer1-2/+2
Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13cxgb4: add new T5 pci device id'sGanesh Goudar1-0/+2
Add 0x50a3 and 0x50a4 T5 device id's Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13dccp: make const array error_code staticColin Ian King1-1/+1
Don't populate array error_code on the stack but make it static. Makes the object code smaller by almost 250 bytes: Before: text data bss dec hex filename 10366 983 0 11349 2c55 net/dccp/input.o After: text data bss dec hex filename 10161 1039 0 11200 2bc0 net/dccp/input.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13rt2x00: make const array glrt_table staticColin Ian King1-1/+1
Don't populate array glrt_table on the stack but make it static. Makes the object code a smaller by over 670 bytes: Before: text data bss dec hex filename 131772 4733 0 136505 21539 rt2800lib.o After: text data bss dec hex filename 131043 4789 0 135832 21298 rt2800lib.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13net: stmmac: make const array route_possibilities staticColin Ian King1-1/+1
Don't populate array route_possibilities on the stack but make it static const. Makes the object code a little smaller by 85 bytes: Before: text data bss dec hex filename 9901 2448 0 12349 303d dwmac4_core.o After: text data bss dec hex filename 9760 2504 0 12264 2fe8 dwmac4_core.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13net: broadcom: bnx2x: make a couple of const arrays staticColin Ian King1-2/+2
Don't populate various tables on the stack but make them static const. Makes the object code smaller by nearly 200 bytes: Before: text data bss dec hex filename 113468 11200 0 124668 1e6fc bnx2x_ethtool.o After: text data bss dec hex filename 113129 11344 0 124473 1e639 bnx2x_ethtool.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13xgene: Don't fail probe, if there is no clk resource for SGMII interfacesThomas Bogendoerfer1-10/+12
This change fixes following problem [ 1.827940] xgene-enet: probe of 1f210030.ethernet failed with error -2 which leads to a missing ethernet interface (reproducable at least on Gigabyte MP30-AR0 and APM Mustang systems). The check for a valid clk resource fails, because DT doesn't provide a clock for sgenet1. But the driver doesn't use this clk, if the ethernet port is connected via SGMII. Therefore this patch avoids probing for clk on SGMII interfaces. Fixes: 9aea7779b764 ("drivers: net: xgene: Fix crash on DT systems") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13bpf: fix return in bpf_skb_adjust_netKefeng Wang1-1/+1
The bpf_skb_adjust_net() ignores the return value of bpf_skb_net_shrink/grow, and always return 0, fix it by return 'ret'. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12disable new gcc-7.1.1 warnings for nowLinus Torvalds1-0/+3
I made the mistake of upgrading my desktop to the new Fedora 26 that comes with gcc-7.1.1. There's nothing wrong per se that I've noticed, but I now have 1500 lines of warnings, mostly from the new format-truncation warning triggering all over the tree. We use 'snprintf()' and friends in a lot of places, and often know that the numbers are fairly small (ie a controller index or similar), but gcc doesn't know that, and sees an 'int', and thinks that it could be some huge number. And then complains when our buffers are not able to fit the name for the ten millionth controller. These warnings aren't necessarily bad per se, and we probably want to look through them subsystem by subsystem, but at least during the merge window they just mean that I can't even see if somebody is introducing any *real* problems when I pull. So warnings disabled for now. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12net: stmmac: revert "support future possible different internal phy mode"LABBE Corentin1-7/+3
Since internal phy-mode is reserved for non-xMII protocol we cannot use it with dwmac-sun8i. Furthermore, all DT patchs which comes with this patch were cleaned, so the current state is broken. This reverts commit 1c2fa5f84683 ("net: stmmac: support future possible different internal phy mode") Fixes: 1c2fa5f84683 ("net: stmmac: support future possible different internal phy mode") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12sfc: don't read beyond unicast address listBert Kenward1-5/+3
If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da45c9a ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12datagram: fix kernel-doc commentsstephen hemminger1-3/+3
An underscore in the kernel-doc comment section has special meaning and mis-use generates an errors. ./net/core/datagram.c:207: ERROR: Unknown target name: "msg". ./net/core/datagram.c:379: ERROR: Unknown target name: "msg". ./net/core/datagram.c:816: ERROR: Unknown target name: "t". Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12socket: add documentation for missing elementsstephen hemminger1-0/+3
Fill in missing kernel-doc for missing elements in struct sock. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12smsc911x: Add check for ioremap_nocache() return codeAlexey Khoroshilov1-0/+5
There is no check for return code of smsc911x_drv_probe() in smsc911x_drv_probe(). The patch adds one. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12fix a braino in compat_sys_getrlimit()Al Viro1-1/+1
Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Fixes: commit d9e968cb9f84 "getrlimit()/setrlimit(): move compat to native" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()Arend van Spriel1-0/+5
The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61db3b70 ("brcmfmac: P2P action frame tx.") Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12net: hns: Bugfix for Tx timeout handling in hns driverLin Yun Sheng1-7/+9
When hns port type is not debug mode, netif_tx_disable is called when there is a tx timeout, which requires system reboot to return to normal state. This patch fix this problem by resetting the net dev. Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12net: ipmr: ipmr_get_table() returns NULLDan Carpenter1-2/+2
The ipmr_get_table() function doesn't return error pointers it returns NULL on error. Fixes: 4f75ba6982bc ("net: ipmr: Add ipmr_rtm_getroute") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12nfp: freeing the wrong variableDan Carpenter1-1/+1
We accidentally free a NULL pointer and leak the pointer we want to free. Also you can tell from the label name what was intended. :) Fixes: abfcdc1de9bf ("nfp: add a stats handler for flower offloads") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_switchdev: Check status of memory allocationIdo Schimmel1-0/+6
We can't rely on kzalloc() always succeeding, so check its return value. Suppresses the following smatch error: mlxsw_sp_switchdev_event() error: potential null dereference 'switchdev_work->fdb_info.addr'. (kzalloc returns null) Fixes: af061378924f ("mlxsw: spectrum_switchdev: Add support for learning FDB through notification") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_switchdev: Remove unused variableIdo Schimmel1-3/+0
Commit 10e23eb299fa ("mlxsw: spectrum: Remove support for bypass bridge port attributes/vlan set") removed statements that used 'bridge_vlan', but didn't remove the variable itself resulting in the following warning with W=1: warning: variable ‘bridge_vlan’ set but not used [-Wunused-but-set-variable] Remove the variable and suppress the warning. Fixes: 10e23eb299fa ("mlxsw: spectrum: Remove support for bypass bridge port attributes/vlan set") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_router: Fix use-after-free in route replaceIdo Schimmel1-0/+3
While working on IPv6 route replace I realized we can have a use-after-free in IPv4 in case the replaced route is offloaded and the only one using its FIB info. The problem is that fib_table_insert() drops the reference on the FIB info of the replaced routes which is eventually freed via call_rcu(). Since the driver doesn't hold a reference on this FIB info it can cause a use-after-free when it tries to clear the RTNH_F_OFFLOAD flag stored in fi->fib_flags. After running the following commands in a loop for enough time with a KASAN enabled kernel I finally got the below trace. $ ip route add 192.168.50.0/24 via 192.168.200.1 dev enp3s0np3 $ ip route replace 192.168.50.0/24 dev enp3s0np5 $ ip route del 192.168.50.0/24 dev enp3s0np5 BUG: KASAN: use-after-free in mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] Read of size 4 at addr ffff8803717d9820 by task kworker/u4:2/55 [...] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] ? mlxsw_sp_router_neighs_update_work+0x1cd0/0x1ce0 [mlxsw_spectrum] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] __asan_load4+0x61/0x80 mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] mlxsw_sp_fib_entry_offload_refresh+0xb6/0x370 [mlxsw_spectrum] mlxsw_sp_router_fib_event_work+0xd1c/0x2780 [mlxsw_spectrum] [...] Freed by task 5131: save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kfree+0x144/0x570 free_fib_info_rcu+0x2e7/0x410 rcu_process_callbacks+0x4f8/0xe30 __do_softirq+0x1d3/0x9e2 Fix this by taking a reference on the FIB info when creating the nexthop group it represents and drop it when the group is destroyed. Fixes: 599cf8f95f22 ("mlxsw: spectrum_router: Add support for route replace") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_router: Add missing rollbackIdo Schimmel1-0/+1
With this patch the error path of mlxsw_sp_nexthop_init() is symmetric with mlxsw_sp_nexthop_fini(). Noticed during code review. Fixes: a8c970142798 ("mlxsw: spectrum_router: Refactor nexthop init routine") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11samples/bpf: fix a build issueYonghong Song4-1/+15
With latest net-next: ==== clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -Isamples/bpf \ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \ -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -Wno-unknown-warning-option \ -O2 -emit-llvm -c samples/bpf/tcp_synrto_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/tcp_synrto_kern.o samples/bpf/tcp_synrto_kern.c:20:10: fatal error: 'bpf_endian.h' file not found ^~~~~~~~~~~~~~ 1 error generated. ==== net has the same issue. Add support for ntohl and htonl in tools/testing/selftests/bpf/bpf_endian.h. Also move bpf_helpers.h from samples/bpf to selftests/bpf and change compiler include logic so that programs in samples/bpf can access the headers in selftests/bpf, but not the other way around. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bridge: mdb: fix leak on complete_info ptr on fail pathEduardo Valentin1-1/+2
We currently get the following kmemleak report: unreferenced object 0xffff8800039d9820 (size 32): comm "softirq", pid 0, jiffies 4295212383 (age 792.416s) hex dump (first 32 bytes): 00 0c e0 03 00 88 ff ff ff 02 00 00 00 00 00 00 ................ 00 00 00 01 ff 11 00 02 86 dd 00 00 ff ff ff ff ................ backtrace: [<ffffffff8152b4aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff811d8ec8>] kmem_cache_alloc_trace+0xb8/0x1c0 [<ffffffffa0389683>] __br_mdb_notify+0x2a3/0x300 [bridge] [<ffffffffa038a0ce>] br_mdb_notify+0x6e/0x70 [bridge] [<ffffffffa0386479>] br_multicast_add_group+0x109/0x150 [bridge] [<ffffffffa0386518>] br_ip6_multicast_add_group+0x58/0x60 [bridge] [<ffffffffa0387fb5>] br_multicast_rcv+0x1d5/0xdb0 [bridge] [<ffffffffa037d7cf>] br_handle_frame_finish+0xcf/0x510 [bridge] [<ffffffffa03a236b>] br_nf_hook_thresh.part.27+0xb/0x10 [br_netfilter] [<ffffffffa03a3738>] br_nf_hook_thresh+0x48/0xb0 [br_netfilter] [<ffffffffa03a3fb9>] br_nf_pre_routing_finish_ipv6+0x109/0x1d0 [br_netfilter] [<ffffffffa03a4400>] br_nf_pre_routing_ipv6+0xd0/0x14c [br_netfilter] [<ffffffffa03a3c27>] br_nf_pre_routing+0x197/0x3d0 [br_netfilter] [<ffffffff814a2952>] nf_iterate+0x52/0x60 [<ffffffff814a29bc>] nf_hook_slow+0x5c/0xb0 [<ffffffffa037ddf4>] br_handle_frame+0x1a4/0x2c0 [bridge] This happens when switchdev_port_obj_add() fails. This patch frees complete_info object in the fail path. Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com> Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11tap: convert a mutex to a spinlockWANG Cong1-9/+9
We are not allowed to block on the RCU reader side, so can't just hold the mutex as before. As a quick fix, convert it to a spinlock. Fixes: d9f1f61c0801 ("tap: Extending tap device create/destroy APIs") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11cxgb4: fix BUG() on interrupt deallocating path of ULDGuilherme G. Piccoli2-22/+36
Since the introduction of ULD (Upper-Layer Drivers), the MSI-X deallocating path changed in cxgb4: the driver frees the interrupts of ULD when unregistering it or on shutdown PCI handler. Problem is that if a MSI-X is not freed before deallocated in the PCI layer, it will trigger a BUG() due to still "alive" interrupt being tentatively quiesced. The below trace was observed when doing a simple unbind of Chelsio's adapter PCI function, like: "echo 001e:80:00.4 > /sys/bus/pci/drivers/cxgb4/unbind" Trace: kernel BUG at drivers/pci/msi.c:352! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c0000000005a5e60] free_msi_irqs+0xa0/0x250 LR [c0000000005a5e50] free_msi_irqs+0x90/0x250 Call Trace: [c0000000005a5e50] free_msi_irqs+0x90/0x250 (unreliable) [c0000000005a72c4] pci_disable_msix+0x124/0x180 [d000000011e06708] disable_msi+0x88/0xb0 [cxgb4] [d000000011e06948] free_some_resources+0xa8/0x160 [cxgb4] [d000000011e06d60] remove_one+0x170/0x3c0 [cxgb4] [c00000000058a910] pci_device_remove+0x70/0x110 [c00000000064ef04] device_release_driver_internal+0x1f4/0x2c0 ... This patch fixes the issue by refactoring the shutdown path of ULD on cxgb4 driver, by properly freeing and disabling interrupts on PCI remove handler too. Fixes: 0fbc81b3ad51 ("Allocate resources dynamically for all cxgb4 ULD's") Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11qed: Fix printk option passed when printing ipv6 addressesKalderon, Michal1-3/+3
The option "h" (host order ) exists for ipv4 only. Remove the h when printing ipv6 addresses. Lead to the following smatch warning: drivers/net/ethernet/qlogic/qed/qed_iwarp.c:585 qed_iwarp_print_tcp_ramrod() warn: '%pI6' can only be followed by c drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1521 qed_iwarp_print_cm_info() warn: '%pI6' can only be followed by c Fixes commit 456a584947d5 ("qed: iWARP CM add passive side connect") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11net: Fix minor code bug in timestamping.txtAhmad Fatoum1-4/+2
Passing (void*)val instead of &val would make a pointer out of an integer and cause sock_setsockopt to -EFAULT. See tools/testing/selftests/networking/timestamping/timestamping.c for a working example. Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Ahmad Fatoum <ahmad@a3f.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closerChristophe Jaillet1-6/+6
'alloc_dma_[rt]x_desc_resources()' functions look very close. Remove a useless initialization and use the same label name for error handling path in order to get them even closer. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11net: stmmac: Fix error handling path in 'alloc_dma_tx_desc_resources()'Christophe Jaillet1-1/+1
If the first 'kmalloc_array' within the loop fails, we should free what as already been allocated, as done in all other error handling path. Fixes: ce736788e8a9 ("net: stmmac: adding multiple buffers for TX") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11net: stmmac: Fix error handling path in 'alloc_dma_rx_desc_resources()'Christophe Jaillet1-1/+1
If the first 'kmalloc_array' within the loop fails, we should free what as already been allocated, as done in all other error handling path. Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11cisco: enic: Fic an error handling path in 'vnic_dev_init_devcmd2()'Christophe Jaillet1-4/+5
if 'ioread32()' returns 0xFFFFFFF, we have to go through the error handling path as done everywhere else in this function. Move the 'err_free_wq' label to better match its name and its location and add a new label 'err_disable_wq'. Update the code accordingly. Fixes: 373fb0873d43 ("enic: add devcmd2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix SRIOV on big-endian architecture.Michael Chan1-5/+10
The PF driver sets up a list of firmware commands from the VF driver that needs to be forwarded to the PF for approval. This list is a 256-bit bitmap. The code that sets up the bitmap falls apart on big-endian architecture. __set_bit() does not work because it operates on long types whereas the firmware interface is defined in u32 types, causing bits in the wrong 32-bit word to be set. Fix it by setting the proper bits on an array of u32. Fixes: de68f5de5651 ("bnxt_en: Fix bitmap declaration to work on 32-bit arches.") Reported-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix bug in ethtool -L.Michael Chan4-9/+8
When changing channels from combined to rx/tx or vice versa, the code uses the wrong "sh" parameter to determine if we are reserving rings for shared or non-shared mode. It should be using the ethtool requested "sh" parameter instead of the current "sh" parameter. Fix it by passing the "sh" parameter to bnxt_reserve_rings(). For ethtool, we will pass in the requested "sh" parameter. Fixes: 391be5c27364 ("bnxt_en: Implement new scheme to reserve tx rings.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix race conditions in .ndo_get_stats64().Michael Chan2-2/+17
.ndo_get_stats64() may not be protected by RTNL and can race with .ndo_stop() or other ethtool operations that can free the statistics memory. Fix it by setting a new flag BNXT_STATE_READ_STATS and then proceeding to read statistics memory only if the state is OPEN. The close path that frees the memory clears the OPEN state and then waits for the BNXT_STATE_READ_STATS to clear before proceeding to free the statistics memory. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-10kernel/exit.c: avoid undefined behaviour when calling wait4()zhongjiang1-0/+4
wait4(-2147483648, 0x20, 0, 0xdd0000) triggers: UBSAN: Undefined behaviour in kernel/exit.c:1651:9 The related calltrace is as follows: negation of -2147483648 cannot be represented in type 'int': CPU: 9 PID: 16482 Comm: zj Tainted: G B ---- ------- 3.10.0-327.53.58.71.x86_64+ #66 Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA , BIOS CTSAV036 04/27/2011 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SyS_wait4+0x1cb/0x1e0 system_call_fastpath+0x16/0x1b Exclude the overflow to avoid the UBSAN warning. Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhongjiang <zhongjiang@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10kernel/signal.c: avoid undefined behaviour in kill_something_infozhongjiang1-0/+4
When running kill(72057458746458112, 0) in userspace I hit the following issue. UBSAN: Undefined behaviour in kernel/signal.c:1462:11 negation of -2147483648 cannot be represented in type 'int': CPU: 226 PID: 9849 Comm: test Tainted: G B ---- ------- 3.10.0-327.53.58.70.x86_64_ubsan+ #116 Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SYSC_kill+0x43e/0x4d0 SyS_kill+0xe/0x10 system_call_fastpath+0x16/0x1b Add code to avoid the UBSAN detection. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhongjiang <zhongjiang@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10binfmt_elf: safely increment argv pointersKees Cook1-11/+9
When building the argv/envp pointers, the envp is needlessly pre-incremented instead of just continuing after the argv pointers are finished. In some (likely impossible) race where the strings could be changed from userspace between copy_strings() and here, it might be possible to confuse the envp position. Instead, just use sp like everything else. Link: http://lkml.kernel.org/r/20170622173838.GA43308@beast Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Rik van Riel <riel@redhat.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10s390: reduce ELF_ET_DYN_BASEKees Cook1-8/+7
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For s390 the position could be 0x10000, but that is needlessly close to the NULL address. Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10powerpc: move ELF_ET_DYN_BASE to 4GB / 4MBKees Cook1-6/+7
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10arm64: move ELF_ET_DYN_BASE to 4GB / 4MBKees Cook1-6/+6
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, to match ARM. This could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running arm compat PIE will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10arm: move ELF_ET_DYN_BASE to 4MBKees Cook1-6/+2
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. 4MB is chosen here mainly to have parity with x86, where this is the traditional minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For ARM the position could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running PIE on 32-bit ARM will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10binfmt_elf: use ELF_ET_DYN_BASE only for PIEKees Cook2-14/+58
The ELF_ET_DYN_BASE position was originally intended to keep loaders away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2 /bin/cat" might cause the subsequent load of /bin/cat into where the loader had been loaded.) With the advent of PIE (ET_DYN binaries with an INTERP Program Header), ELF_ET_DYN_BASE continued to be used since the kernel was only looking at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the top 1/3rd of the TASK_SIZE, a substantial portion of the address space is unused. For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are loaded above the mmap region. This means they can be made to collide (CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with pathological stack regions. Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap region in all cases, and will now additionally avoid programs falling back to the mmap region by enforcing MAP_FIXED for program loads (i.e. if it would have collided with the stack, now it will fail to load instead of falling back to the mmap region). To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP) are loaded into the mmap region, leaving space available for either an ET_EXEC binary with a fixed location or PIE being loaded into mmap by the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE, which means architectures can now safely lower their values without risk of loaders colliding with their subsequently loaded programs. For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and suggestions on how to implement this solution. Fixes: d1fd836dcf00 ("mm: split ET_DYN ASLR from mmap ASLR") Link: http://lkml.kernel.org/r/20170621173201.GA114489@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rik van Riel <riel@redhat.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Pratyush Anand <panand@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10fs, epoll: short circuit fetching events if thread has been killedDavid Rientjes1-0/+10
We've encountered zombies that are waiting for a thread to exit that are looping in ep_poll() almost endlessly although there is a pending SIGKILL as a result of a group exit. This happens because we always find ep_events_available() and fetch more events and never are able to check for signal_pending() that would break from the loop and return -EINTR. Special case fatal signals and break immediately to guarantee that we loop to fetch more events and delay making a timely exit. It would also be possible to simply move the check for signal_pending() higher than checking for ep_events_available(), but there have been no reports of delayed signal handling other than SIGKILL preventing zombies from exiting that would be fixed by this. It fixes an issue for us where we have witnessed zombies sticking around for at least O(minutes), but considering the code has been like this forever and nobody else has complained that I have found, I would simply queue it up for 4.12. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705031722350.76784@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.